CHAPTER 1 : a
CORROSION...
Electrical Circuit
The Chemical Reaction.
CHAPTER 2..... .
SURFACE PREPARATION METHODS & STANDARDS
Dry abrasive blast cleaning.
Abrasives. nn
Sizing of abrasives
Shot blasted profile.
Profile measurement
Assessing a profile to BS 7079 Pt C ISO 8503.1
Use of the comparators
Using the comparators
Preparation of steel substrate before application of paints and related product
Abrasive Blasting Grade:
Equipment.
Considerations ..
Air Blastin;
Water Blasting ..
High pressure water blasting up to 30 000 psi (water jetting).
High pressure water plus abrasive injection
Low pressure water plus abrasive injection
Steam Cleaning
Air blasting with water injectio
Hand and power tool cleaning. 7079 Pt A, ISO 8501, SS 05 59 00
Flame cleaning.
Method.
Pickling.
Vapour degreasing
Test for soluble iron salt
Test to detect soluble chlorides..
Other tests for salts...
Test to detect the presence of millscale
Test to detect the presence of dust on a substrate...
Test to detect the presence of moisture on a substrat
Test to detect the presence of oil or grease.
CHAPTER 4Metallic Pigments
Opaque pigments ..
Extender pigments
Laminar pigments
Solutions
Dispersions.
A suspension .
‘An emulsioi
CHAPTER 6... : =
DRYING AND CURING OF PAINT FILMS
CHAPTER 7
PAINT SYSTEMS.
Primer.
iid-coat:
Finishing coats .
Moisture tolerant systems
Powder coating materials
Thermosettin,
Sacrificial coatings...
CHAPTER 8.
WATER BORNE COATING:
CHAPTER 9.
PAINT MANUFACTURE
Direct charge dispersing mills
CHAPTER 10..
TESTING OF PAINTS FOR PROPERTIES AND PERFORMANCE.
Tests done on paint .
Determination of volatile, non volatile
Flash point determination ..
Paint density.
Relative density or specific gravit
Hegman grind gauge...
Viscosity
Kinematic viscosity.
Flow viscometers (Flow cups).
CHAPTER 11 ——
FILM THICKNESSES
Wet film thickness measurement.
Tests done on dry paint films.
Dry film thicknessTest panels
Calculations .
Destructive test gauges...
Non destructive test gauges
Tests for mechanical properties on paint films.
Abrasion resistance...
Hardness,
Flexibility BS 3900 E1
Impact resistance..
Mechanical thumb test
Pencil scratch test (Wolff-Wilborn)..
Mechanical scratch test
Gold leaf test:
Thumbnail test
Opacity.
Hiding power charts and micrometer adjustable film applicator.
Cross cut (cross haté
Dolly test.
Hydraulic adhesion test equipment
CHAPTER 12...
SPECIFIED COATING CONDITIONS .
Relative Humidity.
Dew Point
The Whirling Hygrometer, Aspirated Byprometer or Psychrometer .
Steel temperature measurement
CHAPTER 13.
CATHODIC PROTECTION
Sacrificial anode systems.
Impressed current system.
Interference ..
Monitoring CP
Cathodic disbondment
CHAPTER 14..
HOLIDAY/PINHOLE DETECTIO!
Voltage setting
CHAPTER 15.
PAINT APPLICATION.
Brush application
Roller application.
Spray application
Conventional spray
Airless spray.