Professional Documents
Culture Documents
Questions:
1. Which of the following correctly discribes the characteristics of switched and
routed data flows ?
A Switches create a single collision domain and a single broadcast domain,
Routers provide seperate collision domains.
B Switches create seperate collision domains and seperate broadcast
domains, Routers provide seperate collision domains and seperate
broadcast domain as well.
C Switches create seperate collision domains and seperate broadcast
domains, Routers provide seperate collision domains.
D Switches create a single collision domain and seperate broadcast domains,
Routers provide seperate broadcast domain as well.
E Switches create seperate collision domains and a single broadcast domain,
Routers provide seperate broadcast domain.
4. Bio. Inc. has an enterprise server that is shared by all departments. The
accounting departments each have their own fileserver. As network
administrator, You need to ensure a secure seperation exists between the
accounting and marketing departments. What should you do to accomplish this
task ?
A Install a hub
B Install a switch
C Install a router
D Install a bridge
7. Giving the following description of OSI layers, choose the correct order that
these statements are listed in.
I This layer segments and reassembles data into a data stream.
II This layer manages device addressing, tracks the location of devices, and
determines best path.
III This layer provides the physical transmission of the data and handles
error notification and flow control.
A Network,Transport,Datalink
B Datalink,Session,Transport
C Transport,Network,Datalink
D Session,Transport,Network
E Datalink,Transport,Network
10. Identify the two procedures necessary to define and enable standard access lists
to an interface (Choose 2) ?
A Define the number of access lists supported on the interface
B One-by-one copy the access list to the selected interfaces
C Choose an interface to apply to the access list group
D Define the access list number along with additional parameters
E Assign th access list number to an access list group.
F Define an access list group with both the access list number interface
number as members.
11. Which of the following best describes the meaning of “ show access- list 101” ?
A Verifies your 101th access list
B Shows extended access list 101
C Verifies your access lists
D Monitors IP access lists
E Shows the access- list error message 101
15. Identify situations where the holddown timer would be reset (Choose 3) ?
A The evolved time exceeds the maximum number.
B Router exchanged have updated summaries at area borders.
C The router receives a processing task proportiional to the number of links
in the internetwork.
D A router detects faulty LSP’s.
E A router detects faulty packets.
F The holddown timer expires.
G An update is received indicating the original route to the network has been
restored.
H An update is received indicating an alternate route
I A router detects routing table errors.
16. You are required to load a new version of the cisco IOS into one of the routers on
your company’s corporate network. Which of the following command will
accomplish this ?
A copy tftp flash
B copy flash ftp
C copy ftp flash
D copy flash tftp
17. You are configuring a router from setup mode. What does the [ ] signify ?
A The recommeded setting for the parameter
B The defa ult value for the parameter
C The selection of choices for the parameter
D The variable’s label for the parameter
E The overriding variable inserted by the cisco IOS for the parameter
18. You are configuring a Cisco router that is attached to your company’s corporate
internetwork. Which of the following is responsible for storing the ARP cache,
routing tables and packet buffers.
A ROM
B Mini- ROM
C Flash Memory
D DROM
E NVRAM
F RAM
19. Which of the following symbols in the router prompt indicates that you are in
privileged mode ?
A%
B#
C privileged
D>
E^
20. You are configuring an cisco switch. As you try try to enter a command, you keep
getting the %incomplete error response. How can you get help on the command
that you are trying to enter ?
A Reenter the command followed by a questionmark to view keywords
B Type “ Help” followed by the command to see command parameters
C Use the up arrow to review the prompt before the error
D Type “?” to display all the console commands
E Type history to review the prompt before the error
21. How do you view all acces list applied on all interfaces (Choose 2) ?
A show access list
B show running config
C show access list all
D show access list interfaces all
22. What is sure about IPX rip (Choose 2) ?
A it uses unequal multiple path
B it uses ticks and hop counts as it metric
C Routing table update sents at 60 sec interval by default
D it does not support the split horizon algorithm
23. Can two different IPX encapsulation type be transmitted on a single dat link ?
A True
B False
24. What is the following term called : The process in which frames from one
network system are placed inside the frames of another network system ?
A Route Poisoning
B Split Horizon
C Tunneling
D Flow Control
25. You have 8 workstations tha t are connected to a switch, each is connected to an
10 Mbps port. What will be the individual bandwith available to each ?
A 80
B 10
C 16
D5
31. Which layer provides segmentation of data and reassembling at the other end ?
A Session
B transport
C Datalink
D Network
32. Which of the two Ethernet implementation have distances of 100 Meters ?
A 10 base 2
B 10 Base T
C 100 Base TX
D 100 Base FX
35. What command will enable an encrypted password which cannot be seen in clear
text in the running config ?
A Enable password
B Enable encrypted password
C Service password encrypted
D Enable secret password
36. What command will you give on the privileged mode to see the previous 10
commands in your buffer ?
A show buffer
B show memory
C show previous command’
D show history
40. In subinterface mode, if you enter CRTL Z, which router mode will you return
to?
A user EXEC mode
B Global config mode
C Router mode
D priviledged mode
41. You want a message to appear at an interface defining the job description of the
network attached finance lan . How do you accomplish this ?
A banner motd #
B Message finance LAN
C Description Finance LAN
42. You can config ppp on which of the following physical interfaces (Choose 2) ?
A asynchronous serial
B Ethernet
C Fast Ethernet
D Synchronous serial
47. What command wil force the router to boot from ROM ?
A Boot rom
B Boot rxboot
C Net boot rommon
D Boot system rom
52. In frame switching, which operatio n mode checks the destination address as soon
as the header is received and immediately begins forwarding the frame ?
A Store and forward
B Cut through
C fragment free
54. Synchronizes VLAN configuration information with other switches. This is true
for which switching modes (Choose 2) ?
A Server Mode
B Client Mode
C Transparent mode
D User mode
55. To reset the configuration revision number, what command do you use in
privileged mode ?
A Reset revision number
B VTP number reset
C No VTP
D Delete VTP
56. How will you be certain that STP is working (VLAN 1) properly in your switched
network when you use the syntax show spantree ?
A Bridge indentifier has priority 32768
B Adress is 0050F037DA00
C Disignated port has priority 0
D VLAN 1 is executing the IEEE spanning tree protocol
60. How many bits are by default in a subnet mask of a class B adress ?
A8
B 16
C 24
D 28
62. You are given an ip adress 132.15.136.2/18 what subnet is the host ip on ?
A 132.15.136.0
B 132.15.128.0
C 132.15.192.0
63. In order to have 5 subnets and 17 hosts on each subet, how many bits subnetting
will you do on the class B adress 162.13.0.0/16 ?
A 255.255.128.0
B 255.255.224.0
C 255.255.240.0
D 255.255.248.0
70. What will be the wildcard mask if you want to deny the host 10.1.2.4 to send
traffic out of E0 ?
A Access list 101 permit any any
B Access list 1 deny 0.0.0.0 255.255.255.255
C Access list 1 deny 10.1.2.4 0.0.0.0
73. The total default bandwidth for ISDN Bri is 144. How much of this bandwith is
used for data transfer ?
A 64k
B 128k
C 144k
D 100k
75. What command shows the encapsulation type, LMI, DLCI on an interface S0 ?
A Show frame relay
B Show frame relay LMI
C Show interface S0
D Show frame relay PVC
76. Based on addres 238.255.255.255 what is the protocol and type of adress ?
A Mac and multicast
B Ip and Multicast
C Ip and broadcast
D None of the above
The Following questions are not complete but they are very usefull for the CCNA exam , I
had several of them !!
81. Assuming no subnetting, given the ip address 172.16.10.22, what all can u learn
from this (Choose 2)?
A Class B
B Class C
C hostadress = 0.0.10.22
D network adresss = 172.16.10.0
E network address = 172.0.0.0
84. Standard you have to methods of switching : cut trough and store&forward. But
the new catalyst series use a new modified version. What is special about this ?
88. How many collisions appear in an Full Duplex Fast Ethernet connection ?
89. You get an Exibit that shows an router with 3 interfaces and thus 3 IPX
networks.
Interface ethernet 0
Network 4a
Ip access- group 800
Interface ethernet 1
Network 3d
Interface ethernet 2
Net work 5c
What is the effect of having the following access- list on interface e0 ?
ACCESS-LIST 800 PERMIT 3D 4A
91. Can ipx traffic coexcist in the same data link layer ?
93. How do you configure IGRP on a router with an administrative distance of 100 ?
94. In an frame relay cloud, one router on one end does not support RARP, how will
you fix this ?
95. U get an question were they moan about an company XYZ that has employees
outsourced at home, but they have large file that must been sent to their work.
What technology do they need ?
ANSWERS
1. E
2. B,D
3. C
4. C
5. BE
6. E
7. C
8. A
9. A
10. CD
11. B
12. C
13. B
14. BCDE
15. CFG
16. A
17. B
18. F
19. B
20. A
21. AB
22. BC
23. A
24. C
25. B
26. B
27. D
28. D
29. D
30. BE
31. B
32. BC
33. B
34. AC - remember 100BaseTX works by FastEthernet specs.
35. D
36. D
37. D
38. router rip
39. B
40. D
41. C
42. AD
43. C
44. E
45. C
46. B
47. D
48. B (not 100% sure ! maybe BC?)
49. C
50. C
51. E
52. B
53. B
54. AB
55. D
56. D
57. C
58. BD
59. B
60. B
61. D
62. B
63. B
64. AB
65. D
66. CD
67. C
68. C
69. B
70. C
71. BD
72. D
73. B
74. C
75. C
76. B
77. Adress learning, broadcast filtering, loop avoidance
78. Network and the node (MAC) adress
79. A cisco router with ISL running can be used
80. Spanning Tree Protocol (STP)
81. AC
82. Call setup, data transfer, call disconnection
83. Router RIP, Network <address>
84. It waits till the data field arrives and then forwards it
85. The destination address of the incoming packet
86. The TAB key
87. ppp & hdlc
88. None
89. it will permit traffiv from network 3d to network 4a
90. the give an receive echo messages, destination unreachable messages
91. Yes
92. it is implied (It’s the MAC address)
93. router igrp 100
94. Create an static mapping of the next hop address with the DLCI
95. Get an ISDN connection
96. Call setup is faster, data/voice/video, faster then a 56k modem
97. The rate in bits per second in which the framerelay switch agrees to
transfer data