Professional Documents
Culture Documents
SEMESTER I
SEMESTER II
SEMESTER III
SEMESTER IV
1. FOURIER TRANSFORMS 9
Fourier Transforms, Complex, Sine and Cosine Transforms, Finite Fourier Transforms.
Applications – One dimensional heat conduction problem, Laplace Equation, Poison
Equation.
2. CALCULUS OF VARIATIONS 8
Variation and its properties – Euler’s equation – Functionals dependent on first and higher
order derivatives – Functionals dependent on functions of several independent variables –
Some applications – Direct methods – Ritz and Kantorovich methods.
10
--------
L-45 T-15 No. of periods 60
--------
REFERENCES
1. Sneddon,I.N., Elements of partial differential equations, McGraw-Hill, 1986.
2. Spiegel, M.R., Theory and problems of complex variables with an introduction to
conformal mapping and its applications, Schaum’s outline series, McGraw-Hill Book
Co.,1987.
3. Sankara Rao, K., Introduction to partial differential equations,Prentice–Hall of
India,New Delhi, 1995
4. Elsgolts, L., Differential equation and calculus of variations, Mir Publishers, Moscow,
1996.
5. Carnanan. B., Luther. H.A., and Wilkes, J.O., Applied Numerical Methods, Wiley and
Sons, 1976
IC1601 ADVANCED HEAT TRANSFER 3 1 0 100
( Use of approved handbook permitted )
Momentum and Energy Equations, Turbulent Boundary Layer Heat Transfer, Mixing
ength concept, Turbulence Model – K Є Model, Analogy between Heat and Momentum
Transfer – Reynolds, Colburn, Prandtl Turbulent flow in a Tube, High speed flows.
Condensation with shear edge on bank of tubes, Boiling – pool and flow boiling, Heat
exchanger, Є – NTU approach and design procedure, compact heat exchangers.
Mass Transfer, Vaporization of droplets, Combined heat and mass transfer, Heat
Transfer Correlations in various applications like I.C. Engines, Compressors & turbines.
TUTORIAL : 15
--------
No. of periods 60
REFERENCES
1. Incropera F.P. and DeWitt. D.P., Fundamentals of Heat & Mass Transfer, John Wiley &
Sons, 1996.
2. Ozisik. M.N., Heat Transfer – Basic Approach, McGraw-Hill Co., 1985
3. Schlichting, Gersten, Boundarylayer Theory, Springer, 2000
4. P.K. Nag, Heat Transfer, Tata McGraw-Hill, 2002
5. Rohsenow. W.M., Harnett. J.P., and Ganic. E.N., Handbook of Heat Transfer
Applications, McGraw-Hill, NY1985
6. Ghoshdasdidar. P.S., Compiler simulation of flow and Heat Transfer, Tata McGraw-Hill,
1998
7. Patankar. S.V.Numerical heat Transfer and Fluid flow,Hemisphere Publishing
Corporation,1980
IC1602 ADVANCED THERMODYNAMICS 3 1 0 100
( Use of approved charts permitted )
RELATIONS
Availability, Irreversibility and Second-Law Efficiency for a closed System and steady-
state Control Volume. Availability Analysis of Simple Cycles. Thermodynamic
Potentials, Maxwell relations, Generalised relation for changes in Entropy, Internal
Energy and Enthalpy, Generalised Relations for Cp and Cv Clausius Claypeyron
Equation, Joule-Thomson Coefficient, Bridgman Tables for thermodynamic relations.
10
Thermo chemistry, first Law analysis of reacting systems, Adiabatic Flame temperature,
Entropy change of reacting systems, Second Law analysis of reacting systems, Criterion
for reaction equilibrium composition.
4. STATISTICAL THERMODYNAMICS 8
5. IRREVERSIBLE THERMODYNAMICS 7
Tutorial : (15)
-------
Total Hours 60
-------
REFERENCES :
1. INTRODUCTION 9
Ideal and non-ideal flows, general equations of fluid motion, Navier - stokes
equations and their exact solutions. Boundary layer theory, wedge flows,
laminar flow over plates and through cylinders.
3. TURBULENT FLOW
9
Turbulence, models and flow equations: steady and unsteady turbulent boundary
layers
5. SHOCK WAVE 9
REFERENCES
1. CHARACTERIZATION 8
Types - Coal Family - Properties - Calorific Value - ROM, DMMF, DAF and Bone Dry
Basis - Ranking - Bulk & Apparent Density - Storage - Washability - Coking & Caking
Coals - Renewable Solid Fuels - Biomass - Wood Waste - Agro Fuels - Manufactured
Solid Fuels.
3. GASEOUS FUELS 7
Stoichiometry - Mass Basis & Volume Basis - Excess Air Calculation - Fuel & Flue Gas
Compositions - Calculations - Rapid Methods - Combustion Processes - Stationary Flame
- Surface or Flameless Combustion - Submerged Combustion - Pulsating & Slow
Combustion Explosive Combustion.
Coal Burning Equipments - Types - Pulverized Coal Firing - Fluidized Bed Firing - Fixed
Bed & Recycled Bed - Cyclone Firing - Spreader Stokers - Vibrating Grate Stokers -
Sprinkler Stokers, Traveling Grate Stokers.
REFERENCES
1. Samir Sarkar, Fuels & Combustion, 2nd Edition, Orient Longman, 1990
2. Bhatt, Vora Stoichiometry, 2nd Edition, Tata Mcgraw Hill, 1984
3. Blokh AG,Heat Transfer in Steam Boiler Furnace, Hemisphere Publishing Corpn, 1988
4. Civil Davies, Calculations in Furnace Technology, Pergamon Press, Oxford, 1966
5. Sharma SP, Mohan Chander, Fuels & Combustion, Tata Mcgraw Hill, 1984
RA1601 REFRIGERATION SYSTEMS DESIGN 3 0 0 100
3. REFRIGERANTS - HANDLING 6
Classification of Refrigerants, Refrigerant properties, Oil Compatibility, Environmental
Impact - Montreal / Kyoto protocols - Eco Friendly Refrigerants.
TOTAL : 45
REFERENCES
1. Dossat R.J., Principles of refrigeration, John Wiley, S.I. Version (1989).
2. W.F. Stoecker, Refrigeration and Air conditioning, McGraw-Hill Book Company,
1989.
3. Jordan and Priester, Refrigeration and Air conditioning, 1985.
4. Goshnay W.B., Principles and Refrigeration, Cambridge, University Press, 1982.
5. Langley, Billy C., ‘Solid state electronic controls for HVACR’ pentice-Hall 1989.
WEB REFERENCES
1. http://gort.ucsd.edu/newjour/i/msg02859.html
2. http://www.brazeway.com/refrigeration
3. http://Progdev.sait.ab.ca/pwen220/119.ref-com.htm
4. http://147.46.94.112/journal/sej
5. http://www.iifiir.org
TH1603 THERMAL ENGINEERING LABORATORY 0 0 3 100
CYCLE 1
CYCLE 2
Equipments Required:
States of combustion in C.I. Engine – Direct and indirect injection systems – Combustion
chambers – Fuel spray behaviour – spray structure, spray penetration and evaporation –
air motion – Introduction to Turbo charging.
Alcohol, Hydrogen, Natural Gas and Liquefied Petroleum Gas- Properties, Suitability,
Merits and Demerits as fuels, Engine Modifications.
REFERENCE BOOKS
1. R.B.Mathur and R.P. Sharma, Internal combustion Engines.
2. V. Ganesan, Int. Combustion Engines, II Edition, TMH, 2002.
3. Duffy Smith, auto fuel Systems, The Good Heart Willox Company, Inc., 198
IC1654 INSTRUMENTATION FOR THERMAL SYSTEMS 3 0 0 100
Data logging and acquisition, use of intelligent instrument for error reduction, elements
of micro-computer interfacing, intelligent instruments in use.
TOTAL : 45
REFERENCES
1. INTRODUCTION (9)
Global atmospheric change – Green house effect –Ozone Depletion - Natural Cycles -
Mass and Energy Transfer – Material balance – Environmental chemistry and biology –
Impacts – Environmental legislations.
Noise Pollution and its impact - Oil Pollution - Pesticides - Instrumentation for EIA test -
Water Pollution from Tanneries and other Industries and their control – Environment
Impact assessment for various projects – Case studies
TEXT BOOKS
REFERENCE BOOKS
I Cycle
II Cycle
No. of Periods : 45
ELECTIVES
EY1671 COGENERATION AND WASTE HEAT RECOVERY SYSTEMS
3 0 0 100
1. INTRODUCTION
9
2. COGENERATION TEHNOLOGIES
9
9
Cogeneration plants electrical interconnection issues – Utility and cogeneration plant
interconnection issues – Applications of Cogeneration in utility sector – Industrial sector
– building sector – rural sector – Impacts of cogeneration plants – fuel, electricity and
environment
5. ECONOMIC ANALYSIS 9
Total : 45
TEXT BOOKS
REFERENCE BOOKS:
Primary energy analysis - Dead states and energy components-Exergy balance for closed
and control volume systems-applications of exergy analysis for selected energy system
design - Modelling overview- levels and steps in model development - examples of
models – Curve fitting and regression analysis
3. OPTIMISATION 9
Total : 45
TEXT BOOKS
REFERENCE BOOKS
1. S.S.Rao, Optimisation theory and applications, Wiley Eastern, 1990
2. S.S. Sastry, Introductory methods of numerical Analysis, Prentice Hall, 1988
3. P. Meier, Energy Systems Analysis for Developing Countries, Springer
Verlag,1984
4. R.de Neufville, Applied Systems Analysis, Mcgraw Hill, International
Edition,1990
5. Beveridge and Schechter,Optimisation Theory and Practice,Mcgraw Hill,
1970
TH1671 ADVANCED POWER PLANT ENGINEERING 3 0 0 100
1. INTRODUCTION 6
Overview of the Indian power sector – Load curves for various applications – Types of
power plants – Merits and demerits – Criteria for comparison and selection.
Binary and Combined Cycle – Coupled cycles - Comparative analysis of Combined heat
and power cycles - IGCC - AFBC/PFBC cycles – Thermionic Steam power plant.
Overview of Nuclear power plants - Radio activity - Fission process- reaction rates -
diffusion theory, elastic scattering and slowing down - criticality calculations - critical
heat flux - power reactors - nuclear safety. MHD & MHD-Steam Power plants.
Air and water pollution – Acid rains – Thermal pollution – radioactive pollution –
Standardization – Methods of control. Environmental Legislations/Government Policies.
Economics of power plants.
Total : 45
REFERENCES
Classification, Initial and Boundary conditions, Initial and Boundary value problems.
Finite difference method, Central, Forward, Backward difference, Uniform and non-
uniform Grids, Numerical Errors, Grid Independence Test. (10)
Steady one-dimensional conduction, Two and Three dimensional steady state problems,
Transient one-dimensional problem, Two-dimensional Transient Problems.
Algebraic Models – One equation model, K - ∈ Models, Standard and High and Low
Reynolds number models, Prediction of fluid flow and heat transfer using standard codes.
---------
Total 45
REFERENCES
1. Muralidhar, K., and Sundararajan, T., “Computational Fluid Flow and Heat
Transfer”, Narosa Publishing House, New Delhi, 1995.
2. Ghoshdasdidar, P.S., “Computer Simulation of flow and heat transfer” Tata
McGraw-Hill Publishing Company Ltd., 1998.
3. Subas, V.Patankar “Numerical heat transfer fluid flow”, Hemisphere Publishing
Corporation, 1980.
4. Taylor, C and Hughes, J.B. “Finite Element Programming of the Navier Stock
Equation”, Pineridge Press Limited, U.K., 1981.
5. Anderson, D.A., Tannehill, J.I., and Pletcher, R.H., “Computational fluid
Mechanics and Heat Transfer “ Hemisphere Publishing Corporation, Newyork,
USA, 1984.
6. Fletcher, C.A.J. “Computational Techniques for Fluid Dynamics 1” Fundamental
and General Techniques, Springer – Verlag, 1987.
7. Fletcher, C.A.J. “Computational Techniques for Fluid Dynamics 2” Specific
Techniques for Different Flow Categories, Springer – Verlag, 1987.
8. Bose, T.X., “Numerical Fluid Dynamics” Narosa Publishing House, 1997.
EY1601 RENEWABLE ENERGY SYSTEMS 3 0 0 100
1. INTRODUCTION (7)
Solar thermal – Flat plate and concentrating collectors – Solar heating and cooling
techniques – Solar desalination – Solar Pond – Solar cooker – Solar thermal power plant
– Solar photo voltaic conversion – Solar cells – PV applications.
Wind data and energy estimation – Types of wind energy systems – Performance –
Details of wind turbine generator – Safety and Environmental Aspects.
Biomass direct combustion – Biomass gasifier – Biogas plant – Ethanol production – Bio
diesel – Cogeneration – Biomass applications.
Tidal energy – Wave energy – Open and closed OTEC Cycles – Small hydro –
Geothermal energy – Fuel cell systems.
Total : 45
TEXT BOOKS
1. G.D. Rai, Non Conventional Energy Sources, Khanna Publishers, New Delhi,
1999.
2. S.P. Sukhatme, Solar Energy, Tata McGraw Hill Publishing Company Ltd., New
Delhi, 1997.
REFERENCE BOOKS
1. INTRODUCTION 8
Insight on Cryogenics, Properties of Cryogenic fluids, Material properties at Cryogenic
Temperatures. Applications of Cryogenics in Space Programs, Superconductivity, Cryo
Metallurgy, Medical applications.
2. LIQUEFACTION CYCLES 10
Carnot Liquefaction Cycle, F.O.M. and Yield of Liquefaction Cycles. Inversion Curve -
Joule Thomson Effect. Linde Hampson Cycle, Precooled Linde Hampson Cycle, Claudes
Cycle Dual Cycle, Ortho-Para hydrogen conversion, Eollins cycle, Simpson cycle,
Critical Components in Liquefaction Systems.
4. CRYOGENIC REFRIGERATORS 8
5. HANDLING OF CRYOGENS 10
Cryogenic Dewar, Cryogenic Transfer Lines. Insulations used in Cryogenic Systems,
Instrumentation to measure Flow, Level and Temperature.
TOTAL : 45
REFERENCES
1. Klaus D. Timmerhaus and Thomas M. Flynn, Cryogenic Process Engineering,
Plenum Press, New York, 1989.
2. Randall F. Barron, Cryogenic Systems, McGraw-Hill, 1985.
3. Scott R.B., Cryogenic Engineering, Van Nostrand and Co., 1962.
4. Herald Weinstock, Cryogenic Technology, 1969.
5. Robert W. Vance, Cryogenic Technology, Johnwiley & Sons, Inc., New York,
London.
WEB REFERENCES
1. www.nasa.gov
2. www.cryogenicsociety.org/
3. www.iifiir.org/
4. www.linde.com
5. www.airliquide.com/
6. www.cern.ch
7. www.nist.gov
RA1672 REFRIGERATION MACHINERY AND COMPONENTS 3 0 0 100
1. REFRIGERANT COMPRESSORS 9
2. DESIGN OF CONDENSERS 10
Estimation of heat transfer coefficient, Fouling factor, Friction factor. Design procedures,
Wilson plots, Designing different types of condensers, BIS Standards, Optimisation
studies.
3. DESIGN OF EVAPORATORS 10
Different types of evaporators, Design procedure, Selection procedure, Thermal Stress
calculations, Matching of components, Design of evaporative condensers.
TOTAL : 45
REFERENCES
1. INTRODUCTION: 9
Precooling, Freeze drying principles, Cold storage & freezers, Freezing drying
limitations, Irradiation techniques, Cryofreezing, Numerical and analytical methods in
estimating Freezing, Thawing times, Energy conservation in food industry.
5. TRANSPORT 5
Refrigerated transportation, Refrigerated containers & trucks, Design features, Piping &
Role of cryogenics in freezing & transport
TOTAL : 45
REFERENCES
1. Alan Rodes, Principles of Industrial Microbiology, Pregmon International Pub.,
1989.
2. Ibraham Dincer, Heat Transfer in Food Cooling Applications, Tailor & Francis Pub.,
1997.
3. Stanley E. Charm, Fundamentals of Food Engineering, III Ed. AVI Pub. Company
Inc. 1989.
4. Clive V.I. Dellino, Cold and Chilled Storage Technology, Van Nostrand Reinhold
Pub. New York, 1991.
5. Arora C.P., Refrigeration and Air conditioning II Ed. McGraw-Hill, Pub., 2000.
6. ASHRAE Handbook, Refrigeration, American Society of Heating, Refrigerating and
Air-Conditioning Engineers, Inc. Atlanta, 1988.
TH1771 INDUSTRIAL REFRIGERATION SYSTEMS 3 0 0 100
6
1. INTRODUCTION
2. COMPRESSORS 10
4. VESSELS 8
Vessels in industrial refrigeration: High pressure receiver - flash tank - liquid and vapour
separator - separation enhancers - low pressure receivers - surge drum - surge line
accumulator - thermosyphon receiver - oil pots.
5. ENERGY CONSERVATION 9
TOTAL : 45
REFERENCES:
3. ANALYSIS OF COMPRESSOR 14
Rotor design airfoil theory, vortex theory, cascade effects, degree of reaction, blade twist
stage design, surge and stall, stator and casing, mixed flow impellers.
5. APPLICATIONS OF BLOWERS 6
Applications of blowers, induced and forced draft fans for air conditioning plants, cooling
towers, ventilation systems, booster systems.
TOTAL : 45
REFERENCES
.
1. S.M. Yahya, " Fundamentals of Compressible Flow ", New Age International
(P)Limited, New Delhi, 1996
2. Stepanoff A.J., Turboblowers, John Wiley & Sons, 1970.
3. Brunoeck, Fans, Pergamon Press, 1973.
4. Austin H. Church, Centrifugal pumps and blowers, John Wiley and Sons, 1980.
5. Dixon, Fluid Mechanics, Thermodynamics of turbomachinery Pergamon Press,
1984.
6. Dixon, Worked examples in turbomachinery, Pergamon Press, 1984.
WEB REFERENCES
1. http://www.petropager.com
2. http://www.tamil.org
3. http://www.erichson.com
4. http://www.apgate.com