You are on page 1of 3

Spherical Bearings: Section 14

GMT RUBBER-METAL-TECHNIC LTD

Tel: (+44)(0)1943 870670 Fax: (+44)(0)1943 870631 E-Mail: sales@gmt.gb.com

Website: www.gmt.gb.com

Spherical Bearings
A range of standard sizes available with parallel or tapered bores, or with extended lugs (trunnion) to offer alternative methods of fitment. If parts not held in stock minimum order quantities may apply.

Segmented Spherical Bearing


GMT Segmented Spherical bearings consist of an inner metal bonded to rubber which is also bonded to three outer metal segments. Each of the outer metal segments is bonded such that there is a gap between each of the segments. When installed into the recommended housing diameter the three outer segments will close up together to form a concentric cylinder to equal the housing. This process also pre-compresses the rubber helping to improve the life of the part.

RECOMMENDED HOUSING DIAMETER D

Dimensions and Technical data

D Product Code mm SPH-SB1119-57 SPH-SB1120-57 SPH-SB2184-57 SPH-SB1121-57 SPH-SB2473-57 SPH-SB2140-68 66.70 66.66 90.51 90.47 90.51 90.47 104.80 104.76 127.04 126.98 127.04 126.98

Radial Stiffness kN/mm 70.0 92.8 92.8 88.0 88.0 88.0

Normal Radial Load kN 33.3 57.7 57.7 71.2 110.8 110.8

Torsional Stiffness kNm/rad 0.9 2.8 2.8 4.0 6.8 6.8

Normal Torsional Movement 8.0 8.0 8.0 8.0 10.0 10.0

Conical Stiffness kNm/rad 0.9 2.8 2.8 4.0 5.7 5.7

Normal Max Conical Mechanical Movement 6.0 6.0 6.0 7.0 7.0 7.0 10 9.0 9.0 10.0 11.0 11.0

mm 25.4 28.6 29.9 38.1

mm 54.0 76.0 76.0 82.5

mm 47.9 70.0 70.0 76.2

44.5 104.8 101.6 50.0 104.8 101.6

Note: There is a possible deviation of approx 20% in the above values due to production and hardness tolerances

GMT RUBBER-METAL-TECHNIC LTD. The Sidings, Station Road, Guiseley, Leeds, West Yorkshire, LS20 8BX, U.K.

Page: 14.1
Version 14.0

Spherical Bearings Contd: Section 14


GMT RUBBER-METAL-TECHNIC LTD

Tel: (+44)(0)1943 870670 Fax: (+44)(0)1943 870631 E-Mail: sales@gmt.gb.com

Website: www.gmt.gb.com

Spherical Bearings with Lugs (Trunnion)


RECOMMENDED HOUSING 66.732 DIAMETER 66.702 47.9
48.0 RECOMMENDED HOUSING 90.447 90.412

40.0

DIAMETER 70.0

70.0 48.0

90.64 90.57

18.0

96.0 CRS 135.0

16.0 A/F

21.0

130.0 CRS 170.0

28.0 A/F

21.0

135.0 CRS 170.0

30.0 A/F

SPH-SB2130

SPH-SB2179
Note: Segmented

SPH-SB1615

Note: Segmented

76.2

RECOMMENDED HOUSING DIAMETER 104.80 104.76

60.0

25.0

140.0 CRS 185.0

35.0 A/F

SPH-SB1233
Note: Segmented

Technical Data
Radial Stiffness kN/mm SPH-SB2130-60 SPH-SB2179-57 SPH-SB1615-68 SPH-SB1233-57 50.0 tbd 105.2 88.0 Normal Radial Load kN 25.0 tbd 63.1 71.2 Torsional Stiffness kNm/rad 0.7 tbd 3.6 4.0 Normal Torsional Movement 12 tbd 5.0 8.0 Conical Stiffness kNm/rad 0.6 tbd 3.3 4.0 Normal Conical Movement 10 tbd 4.0 7.0 Max Mechanical 14 tbd 15.0 10.0

Part No.

Note: There is a possible deviation of approx 20% in the above values due to production and hardness tolerances

GMT RUBBER-METAL-TECHNIC LTD. The Sidings, Station Road, Guiseley, Leeds, West Yorkshire, LS20 8BX, U.K.

Page: 14.2
Version 14.0

Spherical Bearings Contd: Section 14


GMT RUBBER-METAL-TECHNIC LTD

Tel: (+44)(0)1943 870670 Fax: (+44)(0)1943 870631 E-Mail: sales@gmt.gb.com

Website: www.gmt.gb.com

Special Spherical Bearings


45.11 45.07
28.59 67.05 90.70 90.57

32.0

RECOMMENDED HOUSING DIAMETER 90.51 90.47 70.0

16.0

45.0

76.2

28.76

73.2

SPH-SB1187

SPH-SB1256

SPH-SB1368
Note: Segmented

70.0

90.64 90.58

70.0

90.64 90.58

28.6

28.76

73.3
76.2

SPH-SB1195 Technical Data

SPH-SB1616

Part No.

Radial Stiffness kN/mm

Normal Radial Load kN 6.5 33.6 57.7 63.1 63.1

Torsional Stiffness kNm/rad 0.16 2.0 2.8 3.6 3.6

Normal Torsional Movement 8.0 9.0 8.0 5.0 5.0

Conical Stiffness kNm/rad 0.15 1.9 2.8 3.3 3.3

Normal Conical Movement 2.0 9.0 6.0 4.0 4.0

Max Mechanical 9.0 15.0 15.0

SPH-SB1187-57 SPH-SB1256-57 SPH-SB1368-57 SPH-SB1195-68 SPH-SB1616-68

18.7 41.5 92.8 105.2 105.2

Note: There is a possible deviation of approx 20% in the above values due to production and hardness tolerances

GMT RUBBER-METAL-TECHNIC LTD. The Sidings, Station Road, Guiseley, Leeds, West Yorkshire, LS20 8BX, U.K.

Page: 14.3
Version 14.0

You might also like