Professional Documents
Culture Documents
. DEGREE EXAMINATIONS, OCT/NOV 2013 (Regulation 2008) Fifth Semester Electrical and Electronics Engineering EE2305 - ELECTRICAL MACHINES LABORATORY II
Time: 3 Hours
1. Conduct necessary tests on a three phase alternator and hence predetermine the power factor at which the regulation is zero. Use synchronous impedance method.
2. Conduct necessary tests on a three phase alternator and hence predetermine the regulation at unity p.f. by a) pessimistic method and b) optimistic method. Draw the relevant phasor diagrams.
3. Conduct necessary tests on a three phase alternator and hence predetermine the percentage regulation at (i) unity p.f. (ii) 0.8 p.f. (iii) 0.6 p.f (iv) 0.4 p.f. (v) 0.2 p.f and (vi) zero p.f. (lag &lead). Use pessimistic method. Draw the relevant phasor diagrams.
4. Conduct necessary tests on a three phase alternator and hence predetermine the percentage regulation at (i) unity p.f. (ii) 0.8 p.f. (iii) 0.6 p.f (iv) 0.4 p.f. (v) 0.2 p.f and (vi) zero p.f. (lag &lead). Use optimistic method. Draw the relevant phasor diagrams.
5. By conducting suitable tests on a three phase alternator, predetermine the regulation at unity p.f. using POTIER and ASA method.
6. By conducting suitable test on a three phase alternator, predetermine the regulation at zero p.f. lag using POTIER and ASA method.
7. Determine the direct axis and quadrature axis synchronous reactances of a three phase salient pole alternator by conducting suitable experiment. Also predetermine the voltage regulation at 0, 0.2, 0.4, 0.6, 0.8, unity power factor lagging.
8. Determine the direct axis and quadrature axis synchronous reactances of a three phase salient pole alternator by conducting suitable experiment. Also predetermine the voltage regulation at 0, 0.2, 0.4, 0.6, 0.8, unity power factor leading.
9. Determine the negative and zero sequence impedances of an alternator by conducting suitable experiment.
10. Plot the V curves and inverted V curves when synchronous machine is at no load and constant power by conducting suitable experiment. 11. By suitable experiment, properly synchronize a three phase synchronous motor to the supply mains using lamp method. Also plot the armature current and power factor against the field current.
12. By conducting suitable test on the given three phase induction motor, determine the torque & efficiency at 3/4th full load.
13. By conducting suitable test on the given three phase induction motor, determine the torque, slip & efficiency at 0.5 p.f.
14. By conducting suitable test on the given three phase induction motor, determine i) the slip at noload , ii) slip at 0.5 p.f. & iii) slip at full load.
15. Determine the equivalent circuit parameters of a three phase induction motor by performing no load test and blocked rotor test. Also predetermine its performance parameters from the circle diagram for full load condition.
16. Predetermine the performance parameters of a three phase induction motor from the circle diagram for half load condition by performing no load test and blocked rotor test.
8 - SEPARATION OF NO-LOAD LOSSES OF THREE-PHASE INDUCTION MOTOR 17. Determine the iron loss and mechanical loss of a three phase induction motor by conducting suitable experiment.
18. Separate the no load losses of a three phase induction motor in to its constituent parts by conducting suitable experiment.
19. By conducting suitable test on the given single phase induction motor, determine the torque, slip&efficiency at 3/4th full load.
20. By conducting suitable test on the given single phase induction motor, determine the torque, slip & efficiency at 0.5 p.f.
21. By conducting suitable test on the given single phase induction motor, determine i) the slip at no load , ii) slip at 0.5 p.f. & iii) slip at full load.
22. Determine the equivalent circuit parameters of a single phase induction motor by performing no load test and blocked rotor test. Also predetermine its operating parameters from the equivalent circuit at rated speed.
23. Predetermine the operating parameters of a single phase induction motor from the equivalent circuit at rated speed by performing suitable experiment.