You are on page 1of 2

ANNA UNIVERSITY,CHENNAI-600 025 B.E./B.TECH DEGREE PRACTICAL EXAMINATION APRIL/MAY2013 Regulations-2008 Fourth Semester B.

.E Civil Engineering CE2259 Survey Practical - II Time: 3 Hours Maximum Marks : 100 (100)

1. Determine the horizontal angles between the points A and B by repetition method.

2. Determine the horizontal angle between the two given points by most precision method. (100) 3. Determine the horizontal angles between the points ABCDE by reiteration method. (100

4. Measure the angle subtended between AB, BC, CD, DE & EA by Reiteration method and calculate the area. 5. Determine the horizontal distance and elevation of the given point P on the building using single plane method. Given BM = 100.00m. (100) (100)

6. Determine the elevation and horizontal distance of the given point Q on the building using Double plane method. (100)

7. Determine the horizontal distance and level difference between two inaccessible points A&B. Base line measurement is allowed. 8. Determine the included angle of the given closed traverse ABCDE. (100) (100)

9. Determine the directions and length of the survey lines, that form a circuit which ends at the starting point using angle measuring instrument. (100)

10. Determine the instrument constants (i) Multiplying constant, K and (ii) Additive constant, C by tacheometric surveying. (100)

11. Determine the Reduced level of the point P and the horizontal distance using tangential tacheometry. (100)

12. Determine the vertical distance between a survey point P and the adopted level datum using tangential tacheometry. 13. Determine the Reduced level of the point Q and the horizontal distance using stadia tacheometry. (100) (100)

14. Determine the vertical distance between a survey point Q and the adopted level datum using stadia tacheometry. 15. Determine the horizontal distance using subtense bar method. 16. Set a simple curve by Rankines method using the following data Chord length =20m Angle of deflection =120 Assume necessary data. 17. Set out a transition curve using following data a) Length of chord = 30 m b) Deflection angle = 120 c) Length of transition curve = 15 m 18. Mark the foundation of the watchman shed of size 5 x 5 ft. (100) (100) (100) (100) (100)

19. Determine the horizontal angle between the north vector and the perpendicular projection of the star down onto the horizon (100)

20. Determine the horizontal angle between the observers meridian and the vertical circle passing through the celestial body. (100)

You might also like