Professional Documents
Culture Documents
Alarms HARD_BAD
Possible causes Cause 1: The board and the backplane are connected improperly.
ODU failure occurs FIFO failure occurs Board failure occurs. The type and configuration parameters of the ODU do not match the requirements
RADIO_MUTE
Cause 3: The IF board is faulty, causing abnormal IF output Cause 4: The data output is abnormal because the ODU is faulty. RADIO_RSL_LOW Cause 1: Other alarms occur at the opposite station.
Cause 3: The local ODU is faulty. Cause 4: Signal attenuation on the radio link is very heavy. Cause 1: The other alarms are generated.
MW_LOF
Cause 2: In the case of TDM radio services, the IF working modes at the local station and the opposite station are different. In the case of Hybrid radio services, the channel bandwidth and modulation modes at the local station and the opposite station are different.
Cause 3: The operating frequency of the ODU at the local station is inconsistent with the operating frequency of the ODU at the opposite station
Cause 7: An interference event occurs. MW_FEC_UNCOR Cause 1: The receive power of the ODU is abnormal.
MW_LIM
Cause 4: An interference event occurs. Cause 1: The link ID of the local station does not match with the link ID of the opposite
station.
Cause 2: The services on other radio links are received due to the incorrect configuration of the radio link receive frequency at the local or opposite station.
Cause 3: The antenna receives the radio from other stations, because the direction of the antenna is set incorrectly. Cause 4: The polarization direction of the XPIC is incorrect. Cause 1: Certain alarms are generated (if the alarm is reported by an IF board).
R_LOS
Cause 2: The line performance degrades (if the alarm is reported by an SDH line board).
ETH_LOS
Cause 4: The receive unit of the local station is faulty. Cause 1: The negotiation fails because the transmit port and receive port work in different modes. Cause 2: The cable or fiber is faulty.
Cause 1: The cable is not connected or the cable is faulty. E1_LOS Cause 2: The opposite NE is faulty. Cause 3: The tributary board on the local NE is faulty.
TU_AIS