You are on page 1of 2

Digital Pressure Transmitters

Preciseline / Acculevel: Fast, digitally compensated pressure transmitters with analog output The sensor signal is measured 400 times per second with a highly precise A/D converter (16bit). After each measurement, the exact pressure value is calculated, thereby eliminating the linearity and temperature errors. The analog output signal is updated via the D/A converter. This technology allows highly precise and fast pressure measurements, even over broad temperature ranges. Analog Output The analog output is scalable and is offered in the following formats: Voltage output: 0 10 V Current output (2-wire): 4 20 mA The outputs are protected against reverse polarity and short-circuit. Digital Interface In addition to the analog signal output, these pressure transmitters offer a digital, bus-capable interface, offering the following features: Read-out of the pressure and temperature values User adjustment of zero and gain Scaling of the analog output to other pressure ranges or units Con guration settings Read-out of information, such as serial number, compensated pressure and temperature ranges Two wire RS485 half-duplex with 9,600 baud or 115,200 baud. Digital Compensation Technology Non-linearities and temperature dependencies of the pressure sensor are eliminated to a large extent with a mathematical model of the sensor. In production, each pressure transmitter is measured over the entire temperature and pressure range. These measurment values are the basis for the mathematical model. In operation, the following formula calculates the exact, error-corrected pressure value:

p=
i=0

k=0

coeff

k i * temperature ) * pressure i,k

Preciseline
(Shown larger than actual size)

p: temperature: pressure: coeff: n, m:

Calculated pressure value Measured temperature at the sensor Measured pressure sensor signal Coef cients Order of the polynomials. Value range: 1 3

Preciseline / Acculevel
This compensation technology typically reduces the error band to 0.05 %FS over the entire pressure and temperature range, which is an improvement by a factor of 20 to 50 (see graphics below). Shown below are error maps of conventional and digitally-compensated transmitters, pressure range 0 10 bar, temperature range -10 80C.

Conventional Transmitter

100 Error in mbar 50 0 -50


6 8 pre t 10 arge T n 4 ei ur s s 2 0

-100
-10C 10 25 Temperature 50 80C

ba

Digitally compensated Transmitter

100 50 0 -50
2 6 8 pre t 10 arge T 0

Error in mbar

Acculevel
(Shown larger than actual size) Copyright 2004 Keller America, Inc. All Rights Reserved

-100
-10C 10 25 Temperature 50 80C

nb 4 ei r u ss

ar

11.01.04

Keller America, Inc. 813 Diligence Drive Suite 120 Newport News VA 23606 Toll Free: (877) 2-KELLER Local: (757) 596-6680 Fax: (757) 596-6659 www.kelleramerica.com sales@kelleramerica.com

You might also like