Professional Documents
Culture Documents
track + carriages) installed within wall framing that allows a door to < slide > inside the wall. The benet is a solution that leaves clear space on both sides of the wall and opening, encouraging cohesion between spaces. CS TimberFormed is the original cavity slider, rst engineered by CS FOR DOORS in 1986. Our design principles were simple: To create a high-quality cavity slider that was reliable and ran very smoothly.
CS TimberFormed is tted with timber jamb liners and has a heavy duty track, with ultra-smooth running wheels.
The result is a product constructed of heavy-duty aluminium, carriages that have precision ground bearings and jambs in your choice of quality timber. In short, its quite simply the leading cavity slider on the market.
2 - CS TimberFormed Single unit with classical oversized joinery door and CaviLock CL200 handle.
ify ers? c pe Slid s hy vity W Ca Quality Our aim is to make the best CS quality cavity sliders.
Technology & Innovation
2 3
Our engineers focus on constantly developing new products and rening existing ones. Thats why our products come with a number of unique features. A few exclusive CS CavitySliders features (refer to pics on left): 1 Heavy duty one-piece extruded aluminium track. 2 Minimal clearance means carriages/wheels cannot jam or jump off track. 3 Large diameter wheels with precision ground bearings make for smooth running. 4 Radiused track reduces friction & allows dust to be pushed into the little gutters so the door always slides smoothly. 5 4-wheel carriages are standard on all doors over 90kg. Body made from cast stainless steel for strength & reliability. 6 CarriSnap quick release system allows the door to be removed easily from cavity - no need to unscrew anything and lose door height adjustment.
Service
The only New Zealand manufacturer of cavity sliders to have NZ covered with 4 branches. All branches offer a free site measure & quote.
Product Range
We have over 50 standard products, or if you have other ideas we can make to order.
Were Local
CS FOR DOORS is 100% New Zealand owned & our products are 100% New Zealand Made.
Quality Assured
CS CavitySliders are BRANZ appraised & CodeMark accredited.
Our Guarantee
Come see our door systems at CS FOR DOORS NZIA Award winning Head Ofce & Factory.
Check out the full range of products and use our online calculator at:
www.csfordoors.co.nz
Technical Information
How to specify (example) Product: ~ CS TimberFormed by CS FOR DOORS Location: ~ Dining room Door leaf dimensions: ~ 2400mm x 1200mm Door type: ~ 38mm joinery door Door nish: ~ Paint Single or Bi-Parting: ~ Single Jamb type & nish: ~ Timber at (for architraves); clear pine Framing size & material: ~ 90mm timber framing Wall lining thickness: ~ 10mm Door gear type & nish: ~ CS 240kg track system Handle type: ~ CaviLock CL200 A1010 See CaviLock on our website for more options
Full specications are available on www.masterspec.co.nz
Useful formulas (on-line calculator @ www.csfordoors.co.nz) Dimension Required Trim height* Trim width* Distance between jambs* Single DH + 95 DW - 31 Bi-Parting DH + 95 (DWx2) - 42 (DWx2) + 6 (DWx2) + 20 DH + 38 DH + 49 DH + 18.5
(DWx2) + 30 (DWx4) + 10
Distance over jambs (Arch) DW + 13 Distance over jambs (Grvd) DW + 31 Floor to top of head (Arch) DH + 38 Floor to top of head (Grvd) DH + 49 Floor to underside of head* DH + 18.5
DH = Door Height DW = Door Width * = Same calculations for both Architrave (Arch) & Grooved (Grvd) jambs Note: All dimensions are in millimetres
Detail Options
Aluminium split jamb Grooved jamb Door leaf Flat jamb (For architraves)
Incorporate any of the above architectural detail options with the CS TimberFormed cavity slider to create a specic look or to provide a unique solution.
Trim height Trim width Lintel (part of wall framing). Closing jamb Always quoted as standard. Can be omitted if not needed. Jambs Available as: at jambs ready for architraves or grooved (rebated), ready for wall linings. Track in one piece Heavy-duty aluminium. Back stud Strong and made of reliable, heavy-duty aluminium. Split jambs Timber jamb screw xed to aluminium split jamb. Bottom plate One-piece in aluminium. Pine nogs Fitted on both sides and offset for adjacent wall xing. Extra nogs are available, or
12 1 4 5
2 3 6 7 8
10
Elevation (CAD)
Drawing is not to scale
Wall lining Track Carriage Flat jamb (For architraves) Door leaf
Lintel
6
9 12
11
Timber pelmet block Rebate for wall lining Grooved head jamb
8 7
can be replaced with a full sheet of ply on one side, if more rigidity or xing is needed.
11
T-guide Floor
Cavity Sliders Limited
Skirting blocks Fitted on either side of the bottom plate, to x both linings and skirting. No visible oor track or guide A hidden T-guide at the base of the cavity pocket guides the door through opening.
Cavity Sliders Limited Auckland Head Ofce 5 - 7 Rakino Way Mt Wellington PO Box 112349, Penrose Auckland 1642, NZ T 09 276 0800 F 09 276 2525 info@csfordoors.co.nz
www.csfordoors.co.nz Bay of Plenty / Waikato 40 Newton Street Mt Maunganui T 07 928 0800 F 07 928 2525 salesbop@csfordoors.co.nz
info@csfordoors.co.nz Wellington 33 Grenada Business Park 16 Jamaica Drive Grenada North T 04 473 9994 F 04 473 9995 saleswgtn@csfordoors.co.nz