You are on page 1of 32

Catalog 101

(September 2009)
CONTENTS

PAGE NO.

I. UV LED INSPECTION LAMPS 4


OPX-365/OPTIMAX™ 365
TRI-365/TRITAN™ 365
Nondestructive testing (NDT) is a procedure used to examine and/or inspect materials and components to
locate surface and subsurface defects in a way that allows such materials to be examined without
changing or destroying their original design or structure. II. UV HID INSPECTION LAMPS 6

NDT plays a crucial role in everyday life. It is necessary to assure structural integrity, safety and reliability ML-3500 Series MAXIMA™
in aircraft, motor vehicles, pipelines, seafaring vessels, bridges, trains, tunnels, power stations, re- BIB-150P Series
fineries and oil platforms, all of which are inspected using some method of nondestructive testing. SB-100P Series
FC-Series
Nondestructive testing is also a quality assurance production and management tool which can C-100PA Series
provide impressive results when used correctly. It CH-50P/12
requires an understanding of the various
methods available, their capabilities
and limitations, knowledge of the III. UV STATIONARY LAMPS 14
relevant standards and specifica-
UV-400 Series SuperFlood™
tions for performing the tests.

Materials, products and


equipment that fail to IV. BLUE LIGHT LED INSPECTION LAMPS 16
achieve their design OPX-450/OPTIMAX™ 450
requirements or projected TRI-450/TRITAN™ 450
life due to undetected defects
may require expensive repair
Surface metal defect revealed or early replacement. Such defects V. DIGITAL RADIOMETERS 18
using OPTIMAX™ 365 UV flashlight may also be the cause of unsafe
and Zyglo® liquid penetrant conditions or catastrophic failure, as well as XRP-3000 AccuMAX™
loss of revenue due to unplanned shutdowns. DM-365XA

Nondestructive testing can be applied to each stage of an item’s development, manufacture or construction.
Such item’s materials and assembly can be examined using NDT and either accepted, rejected or repaired. VI. REPLACEMENT PARTS & ACCESSORIES 21
NDT techniques can then be used to monitor the integrity of the item or structure throughout its service life.

The most commonly used NDT methods are visual inspection, liquid penetrant inspection, magnetic particle
inspection, Eddy current inspection, acoustic emission, ultrasonic inspection and radiography. VII. WARRANTY INFORMATION 29
Spectronics Corporation manufactures a wide array of medium and high-intensity inspection lamps and prod-
ucts that are used to detect and identify surface and subsurface flaws in the performance of nondestructive
testing utilizing the visual inspection, liquid penetration and magnetic particle methods. VIII. PRODUCT/CUSTOMER SUPPORT & TECHNICAL ASSISTANCE 30

IX. PRODUCT INDEX 31


CONTENTS

PAGE NO.

I. UV LED INSPECTION LAMPS 4


OPX-365/OPTIMAX™ 365
TRI-365/TRITAN™ 365
Nondestructive testing (NDT) is a procedure used to examine and/or inspect materials and components to
locate surface and subsurface defects in a way that allows such materials to be examined without
changing or destroying their original design or structure. II. UV HID INSPECTION LAMPS 6

NDT plays a crucial role in everyday life. It is necessary to assure structural integrity, safety and reliability ML-3500 Series MAXIMA™
in aircraft, motor vehicles, pipelines, seafaring vessels, bridges, trains, tunnels, power stations, re- BIB-150P Series
fineries and oil platforms, all of which are inspected using some method of nondestructive testing. SB-100P Series
FC-Series
Nondestructive testing is also a quality assurance production and management tool which can C-100PA Series
provide impressive results when used correctly. It CH-50P/12
requires an understanding of the various
methods available, their capabilities
and limitations, knowledge of the III. UV STATIONARY LAMPS 14
relevant standards and specifica-
UV-400 Series SuperFlood™
tions for performing the tests.

Materials, products and


equipment that fail to IV. BLUE LIGHT LED INSPECTION LAMPS 16
achieve their design OPX-450/OPTIMAX™ 450
requirements or projected TRI-450/TRITAN™ 450
life due to undetected defects
may require expensive repair
Surface metal defect revealed or early replacement. Such defects V. DIGITAL RADIOMETERS 18
using OPTIMAX™ 365 UV flashlight may also be the cause of unsafe
and Zyglo® liquid penetrant conditions or catastrophic failure, as well as XRP-3000 AccuMAX™
loss of revenue due to unplanned shutdowns. DM-365XA

Nondestructive testing can be applied to each stage of an item’s development, manufacture or construction.
Such item’s materials and assembly can be examined using NDT and either accepted, rejected or repaired. VI. REPLACEMENT PARTS & ACCESSORIES 21
NDT techniques can then be used to monitor the integrity of the item or structure throughout its service life.

The most commonly used NDT methods are visual inspection, liquid penetrant inspection, magnetic particle
inspection, Eddy current inspection, acoustic emission, ultrasonic inspection and radiography. VII. WARRANTY INFORMATION 29
Spectronics Corporation manufactures a wide array of medium and high-intensity inspection lamps and prod-
ucts that are used to detect and identify surface and subsurface flaws in the performance of nondestructive
testing utilizing the visual inspection, liquid penetration and magnetic particle methods. VIII. PRODUCT/CUSTOMER SUPPORT & TECHNICAL ASSISTANCE 30

IX. PRODUCT INDEX 31


UV LED INSPECTION LAMPS UV LED INSPECTION LAMPS

OPX-365 TRI-365
OPTIMAXTM 365 UV-A LED Inspection Flashlight TRITANTM 365 Multi-LED,
(Patent Pending) Broad-Beam UV-A Inspection Lamp
Powerful, rechargeable, high-intensity UV-A inspection (Patent Pending)
flashlight featuring state-of-the-art, ultra-hi-flux LED technology! Features three cool-running, ultra-high-flux UV-A LEDs for
• Nominal steady-state UV-A intensity of 18,000 µW/cm2 at 15 inches (38 cm) inspection, plus a convenient white light LED to illuminate dark
work areas. This lamp’s broad-beam configuration provides a
• 30,000-hour LED service life wider coverage area than conventional UV-A inspection lamps,
• Low visible light emission — less than 2 foot-candles (22 lux) while its compact head design allows access into areas
inaccessible to larger lamps.
• Electronic Intensity Stabilizer assures consistent performance. Beam
strength will not weaken between charges! • Nominal steady-state UV-A intensity of 5,500 µW/cm2 at 15 inches (38 cm)
• Instant-on operation. Lamp reaches full intensity immediately! • Large 4 inch (10 cm) diameter coverage area, with minimum UV-A
• Ergonomic, portable and rugged. Anodized aluminum lamp body intensity of 2,000 µW/cm2
minimizes corrosion and stands up to years of heavy use. • 30,000-hour LED service life
• Powered by a rechargeable NiMH battery. Provides 90 minutes • UV LEDs produce low visible light emission — less than 2 foot-candles (22 lux)
of continuous inspection between charges.
• Electronic Intensity Stabilizer assures consistent LED performance
• Meets ASTM UV-A intensity specifications for FPI and MPI
• Convenient grip-mounted, three-way rocker switch: White light/Off/UV
Note: For even greater light uniformity, order our optional
DF-365 diffusing filter. • Instant-on operation. Lamp reaches full intensity immediately!
• Rugged, ergonomic, angled lamp body provides safe, fatigue-free use
• Rubber bumper with Borofloat® glass lens protects LEDs from damage
• Built-in fan keeps LEDs cool to maintain optimum light output during extended use
• Choice of 8 foot (2.4 m) or extra-long 20 foot (6.1 m) power cord with AC plug.
Available in 120V, 230V, 240V and 100V models.
• Meets ASTM UV-A intensity specifications for FPI and MPI

Also available: TRI-365M portable, battery-operated AC/DC lamp


Comes complete with smart AC and DC chargers, UV-absorbing kit. Includes TRITAN 365M UV lamp, rechargeable NiMH battery
spectacles, belt holster and padded carrying case. AC charger pack with adjustable shoulder strap and belt loop, AC and DC cord
available in 120V, 230V, 240V and 100V versions. sets, smart AC charger, UV-absorbing spectacles and soft carrying
case. AC charger available in 120V, 230V, 240V and 100V versions.

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM) SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4 -4
(-10) (-10)
20000 6000
20000 -3 -3
18000 (-8) (-8)
6000
16000 10000 -2 5000 -2
(-5) (-5)
5000
14000
-1 -1
Y-INCHES (CM)

Y-INCHES (CM)
5000 4000
12000 (-3) (-3)
4000
2
µW/cm

2
0 0
µW/cm
10000 4000
(0) 3000 (0)
2000
8000
2000 1 1
6000 (3) (3)
2000 1000
4000 2 2
1000 (5) (5)
-4 (-10)
-3 (-8) 1000 -4 (-10)
2000 3 -3 (-8) 3
-2 (-5)
(8) -2 (-5) (8)
0 -1 (-3)
0 (0) -1 (-3)
0
)

-4
M

-3 4 0 (0) 4

)
-4

M
(C

(-10) -2 1 (3) (10) -3 (10)

(C
(-8) -1 (-10) -2 1 (3)
ES

(-5) 0 2 (5) -4 -3 -2 -1 0 1 2 3 4 (-8) -1 -4 -3 -2 -1 0 1 2 3 4

ES
(-3) (-5) 2 (5)
H

1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10) 0 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

(-3)

H
X-IN (0) 2 1 3 (8)
IN

C
CHE (3) 3 4 (10) X-IN (0) 2

IN
Y-

S (C (5) 4 CHE (3) 3 4 (10)


X-INCHES (CM) X-INCHES (CM)

Y-
M) (8) S (C (5) 4
(10) M) (8)
(10)

4 5
UV LED INSPECTION LAMPS UV LED INSPECTION LAMPS

OPX-365 TRI-365
OPTIMAXTM 365 UV-A LED Inspection Flashlight TRITANTM 365 Multi-LED,
(Patent Pending) Broad-Beam UV-A Inspection Lamp
Powerful, rechargeable, high-intensity UV-A inspection (Patent Pending)
flashlight featuring state-of-the-art, ultra-hi-flux LED technology! Features three cool-running, ultra-high-flux UV-A LEDs for
• Nominal steady-state UV-A intensity of 18,000 µW/cm2 at 15 inches (38 cm) inspection, plus a convenient white light LED to illuminate dark
work areas. This lamp’s broad-beam configuration provides a
• 30,000-hour LED service life wider coverage area than conventional UV-A inspection lamps,
• Low visible light emission — less than 2 foot-candles (22 lux) while its compact head design allows access into areas
inaccessible to larger lamps.
• Electronic Intensity Stabilizer assures consistent performance. Beam
strength will not weaken between charges! • Nominal steady-state UV-A intensity of 5,500 µW/cm2 at 15 inches (38 cm)
• Instant-on operation. Lamp reaches full intensity immediately! • Large 4 inch (10 cm) diameter coverage area, with minimum UV-A
• Ergonomic, portable and rugged. Anodized aluminum lamp body intensity of 2,000 µW/cm2
minimizes corrosion and stands up to years of heavy use. • 30,000-hour LED service life
• Powered by a rechargeable NiMH battery. Provides 90 minutes • UV LEDs produce low visible light emission — less than 2 foot-candles (22 lux)
of continuous inspection between charges.
• Electronic Intensity Stabilizer assures consistent LED performance
• Meets ASTM UV-A intensity specifications for FPI and MPI
• Convenient grip-mounted, three-way rocker switch: White light/Off/UV
Note: For even greater light uniformity, order our optional
DF-365 diffusing filter. • Instant-on operation. Lamp reaches full intensity immediately!
• Rugged, ergonomic, angled lamp body provides safe, fatigue-free use
• Rubber bumper with Borofloat® glass lens protects LEDs from damage
• Built-in fan keeps LEDs cool to maintain optimum light output during extended use
• Choice of 8 foot (2.4 m) or extra-long 20 foot (6.1 m) power cord with AC plug.
Available in 120V, 230V, 240V and 100V models.
• Meets ASTM UV-A intensity specifications for FPI and MPI

Also available: TRI-365M portable, battery-operated AC/DC lamp


Comes complete with smart AC and DC chargers, UV-absorbing kit. Includes TRITAN 365M UV lamp, rechargeable NiMH battery
spectacles, belt holster and padded carrying case. AC charger pack with adjustable shoulder strap and belt loop, AC and DC cord
available in 120V, 230V, 240V and 100V versions. sets, smart AC charger, UV-absorbing spectacles and soft carrying
case. AC charger available in 120V, 230V, 240V and 100V versions.

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM) SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4 -4
(-10) (-10)
20000 6000
20000 -3 -3
18000 (-8) (-8)
6000
16000 10000 -2 5000 -2
(-5) (-5)
5000
14000
-1 -1
Y-INCHES (CM)

Y-INCHES (CM)
5000 4000
12000 (-3) (-3)
4000
2
µW/cm

2
0 0
µW/cm
10000 4000
(0) 3000 (0)
2000
8000
2000 1 1
6000 (3) (3)
2000 1000
4000 2 2
1000 (5) (5)
-4 (-10)
-3 (-8) 1000 -4 (-10)
2000 3 -3 (-8) 3
-2 (-5)
(8) -2 (-5) (8)
0 -1 (-3)
0 (0) -1 (-3)
0
)

-4
M

-3 4 0 (0) 4

)
-4

M
(C

(-10) -2 1 (3) (10) -3 (10)

(C
(-8) -1 (-10) -2 1 (3)
ES

(-5) 0 2 (5) -4 -3 -2 -1 0 1 2 3 4 (-8) -1 -4 -3 -2 -1 0 1 2 3 4

ES
(-3) (-5) 2 (5)
H

1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10) 0 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

(-3)

H
X-IN (0) 2 1 3 (8)
IN

C
CHE (3) 3 4 (10) X-IN (0) 2

IN
Y-

S (C (5) 4 CHE (3) 3 4 (10)


X-INCHES (CM) X-INCHES (CM)

Y-
M) (8) S (C (5) 4
(10) M) (8)
(10)

4 5
UV HID INSPECTION LAMPS UV HID INSPECTION LAMPS

ML-3500 Series MAXIMA™


SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4
60000 (-10)

Ultra-High Intensity UV-A Lamps 60000 -3


(-8)
50000
These super-powerful lamps make NDT inspections easier, 20000 -2
(-5)
safer and more reliable. They feature state-of-the-art micro 40000 10000 -1

Y-INCHES (CM)
discharge light (MDL) technology with a fatigue-free (-3)

2
ergonomic design.

µW/cm
4000 0
30000
(0)
• Deliver up to 10 times the UV-A output of conventional HID 2000 1
inspection lamps 20000 (3)
1000
• Prefocused at the factory -4 (-10)
2
(5)
10000
-3 (-8)
• Instant on/off/restrike -2 (-5) 3
-1 (-3) (8)
• Lightweight, solid-state ballast 0
0 (0) ML-3500S

)
-4

M
-3 4
• Integral bulb/reflector assembly

(C
(-10) -2 1 (3)
(-8) -1 (10)

ES
(-5) 2 (5)
0 -4 -3 -2 -1 0 1 2 3 4
• Stay-cool, impact-resistant and dent-proof housing (-3)

H
1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
CHE (3) 3 4 (10)
• Available in 120V, 230V, 240V and 100V versions, as well as

Y-
S (C (5) 4
M) (8) X-INCHES (CM)
(10)
battery-operated versions
• All bulbs feature a rated life of 2,000 hours
SURFACE CONTOUR PROFILE AT 15 IN (38 CM)
The MAXIMA™ series consists of three models: TOP INTENSITY PROFILE AT 15 IN (38 CM)

The ML-3500S with a spot reflector has a nominal steady-state UV-A intensity -4
60000 (-10)
of 50,000 µW/cm 2 at 15 inches (38 cm).
-3
20000 (-8)
The ML-3500D with a spot reflector and diffusing filter has a nominal steady- 50000
-2
state UV-A intensity of 14,000 µW/cm 2 at 15 inches (38 cm). (-5)
10000
40000
The ML-3500FL with a flood reflector has a nominal steady-state UV-A intensity -1

Y-INCHES (CM)
(-3)
of 4,500 µW/cm 2 at 15 inches (38 cm).

2
4000

µW/cm
Line voltage model 30000 0
All models come standard with 8 foot (2.4 m) primary and secondary cords. (0)

Lamps are also available with extended length primary cords or with a 35 foot 2000 1
20000 (3)
(10.7 m) secondary cord housed in a retractable “flying” reel.
1000 2
10000 -4 (-10)
In addition, all MAXIMATM lamps are available in battery-operated “M” versions. -3 (-8)
(5)

Each includes a 12-volt, 7 amp/hr rechargeable battery that will operate the lamp -2 (-5) 3
0 -1 (-3) (8)
for a full two hours. A battery charger and carrying case are included. Visit 0 (0)

)
-4

M
-3 4
www.spectroline.com for more details. ML-3500D

(C
(-10) -2 1 (3)
(-8) -1 (10)

ES
(-5) 2 (5)
(-3) 0 -4 -3 -2 -1 0 1 2 3 4

H
1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
CHE (3) 3 4 (10)

Y-
S (C (5) 4
M) (8) X-INCHES (CM)
(10)

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4
(-10)
60000
6000
-3
(-8)
50000 5000 -2
(-5)
40000 4000 -1

Y-INCHES (CM)
(-3)

2
µW/cm
0
30000 2000 (0)

1
20000 1000 (3)

2
-4 (-10) (5)
10000
-3 (-8)
3
-2 (-5) (8)
0 -1 (-3) ML-3500FL
0 (0) 4

)
-4

M
-3 (10)

(C
(-10) -2 1 (3)
(-8) -1

ES
(-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4
(-3) 0

H
1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

C
X-IN (0) 2

IN
CHE (3) 3 4 (10)

Y-
S (C (5) 4 X-INCHES (CM)
(8)
ML-3500 Series lamp with 35 foot (10.7 m) M) (10)
secondary cord housed in a retractable “flying” reel
Battery-operated “M” version

6 7
UV HID INSPECTION LAMPS UV HID INSPECTION LAMPS

ML-3500 Series MAXIMA™


SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4
60000 (-10)

Ultra-High Intensity UV-A Lamps 60000 -3


(-8)
50000
These super-powerful lamps make NDT inspections easier, 20000 -2
(-5)
safer and more reliable. They feature state-of-the-art micro 40000 10000 -1

Y-INCHES (CM)
discharge light (MDL) technology with a fatigue-free (-3)

2
ergonomic design.

µW/cm
4000 0
30000
(0)
• Deliver up to 10 times the UV-A output of conventional HID 2000 1
inspection lamps 20000 (3)
1000
• Prefocused at the factory -4 (-10)
2
(5)
10000
-3 (-8)
• Instant on/off/restrike -2 (-5) 3
-1 (-3) (8)
• Lightweight, solid-state ballast 0
0 (0) ML-3500S

)
-4

M
-3 4
• Integral bulb/reflector assembly

(C
(-10) -2 1 (3)
(-8) -1 (10)

ES
(-5) 2 (5)
0 -4 -3 -2 -1 0 1 2 3 4
• Stay-cool, impact-resistant and dent-proof housing (-3)

H
1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
CHE (3) 3 4 (10)
• Available in 120V, 230V, 240V and 100V versions, as well as

Y-
S (C (5) 4
M) (8) X-INCHES (CM)
(10)
battery-operated versions
• All bulbs feature a rated life of 2,000 hours
SURFACE CONTOUR PROFILE AT 15 IN (38 CM)
The MAXIMA™ series consists of three models: TOP INTENSITY PROFILE AT 15 IN (38 CM)

The ML-3500S with a spot reflector has a nominal steady-state UV-A intensity -4
60000 (-10)
of 50,000 µW/cm 2 at 15 inches (38 cm).
-3
20000 (-8)
The ML-3500D with a spot reflector and diffusing filter has a nominal steady- 50000
-2
state UV-A intensity of 14,000 µW/cm 2 at 15 inches (38 cm). (-5)
10000
40000
The ML-3500FL with a flood reflector has a nominal steady-state UV-A intensity -1

Y-INCHES (CM)
(-3)
of 4,500 µW/cm 2 at 15 inches (38 cm).

2
4000

µW/cm
Line voltage model 30000 0
All models come standard with 8 foot (2.4 m) primary and secondary cords. (0)

Lamps are also available with extended length primary cords or with a 35 foot 2000 1
20000 (3)
(10.7 m) secondary cord housed in a retractable “flying” reel.
1000 2
10000 -4 (-10)
In addition, all MAXIMATM lamps are available in battery-operated “M” versions. -3 (-8)
(5)

Each includes a 12-volt, 7 amp/hr rechargeable battery that will operate the lamp -2 (-5) 3
0 -1 (-3) (8)
for a full two hours. A battery charger and carrying case are included. Visit 0 (0)

)
-4

M
-3 4
www.spectroline.com for more details. ML-3500D

(C
(-10) -2 1 (3)
(-8) -1 (10)

ES
(-5) 2 (5)
(-3) 0 -4 -3 -2 -1 0 1 2 3 4

H
1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
CHE (3) 3 4 (10)

Y-
S (C (5) 4
M) (8) X-INCHES (CM)
(10)

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4
(-10)
60000
6000
-3
(-8)
50000 5000 -2
(-5)
40000 4000 -1

Y-INCHES (CM)
(-3)

2
µW/cm
0
30000 2000 (0)

1
20000 1000 (3)

2
-4 (-10) (5)
10000
-3 (-8)
3
-2 (-5) (8)
0 -1 (-3) ML-3500FL
0 (0) 4

)
-4

M
-3 (10)

(C
(-10) -2 1 (3)
(-8) -1

ES
(-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4
(-3) 0

H
1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

C
X-IN (0) 2

IN
CHE (3) 3 4 (10)

Y-
S (C (5) 4 X-INCHES (CM)
(8)
ML-3500 Series lamp with 35 foot (10.7 m) M) (10)
secondary cord housed in a retractable “flying” reel
Battery-operated “M” version

6 7
UV HID Inspection lamps

BIB-150P Series
World’s Highest Intensity, Self-Ballasted UV-A Lamp
This lamp is a favorite with NDT inspectors because it provides
super-high UV-A intensity at an economical price. Its light weight
and ergonomic design ensure easy handling for long inspections.
• Unique Built-In-Ballast™ 150-watt bulb eliminates the need for a heavy, external
transformer
• Space-age engineering polymer housing is impact-resistant and dent-proof
• Total weight of only 31/4 lbs (1.5 kg). Measures just 9 5/8 inches (24 cm) long,
including the heat guard/stand
• Vinyl-coated, stainless-steel, wraparound caging protects against burns and acts
as a lamp stand
• Special Bulb-Saver™ minimizes bulb movement during handling and reduces the
risk of breakage
• Easily meets ASTM UV-A intensity specifications for FPI and MPI
• Available in either concentrated spot or broad-beam versions. Concentrated spot configuration has a nominal steady-state
UV-A intensity of 4,500 µW/cm 2 at 15 inches (38 cm). Broad-beam configuration has a nominal steady-state UV-A intensity
of 3,000 µW/cm 2 at 15 inches (38 cm).

Both models come standard with an 8 foot (2.4 m) power cord. Lamps are also available with extended length power cords or
with a 35 foot (10.7 m) cord housed in a retractable “flying” reel. Visit www.spectroline.com for more details.

Surface contour profile at 15 in (38 cm) Top intensity profile at 15 in (38 cm)

-4
6000 (-10)

5000 -3
(-8)
5000
-2
4000 (-5)

4000 -1
y-inches (cm)

(-3)
2000
2
µW/cm

3000 0
(0)
1000 1
2000 (3)

2
1000 -4 (-10) (5)
-3 (-8)
-2 (-5) 3
0 -1 (-3) (8)
-4 0 (0)
-3
BIB-150P
)
(CM

(-10) -2 1 (3) 4
(-8) -1 (10)
(-5) 2 (5)
ES

(-3) 0
1 -4 -3 -2 -1 0 1 2 3 4
H

(0) 2 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

X-IN (3) 3
IN

CHE (5) 4 4 (10)


Y-

S (CM (8)
(10) x-inches (cm)
)

Surface contour profile at 15 in (38 cm) Top intensity profile at 15 in (38 cm)

-4
6000 (-10)

5000 -3
(-8)
5000
-2
4000 (-5)
4000 -1
y-inches (cm)

(-3)
2000
2
µW/cm

3000 0
(0)
1000
1
2000 (3)

2
-4 (-10) (5)
1000 -3 (-8)
-2 (-5) 3

-4
0
-3
-1 (-3)
0 (0) BIB-150P (8)
)

(Broad-Beam)
(CM

(-10) -2 1 (3) 4
(-8) -1 (10)
(-5) 2 (5)
ES

(-3) 0
1 -4 -3 -2 -1 0 1 2 3 4
H

(0) 2 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

X-IN (3) 3
IN

CHE (5) 4 4 (10)


Y-

S (CM (8)
(10) x-inches (cm)
)
8
UV HID Inspection lamps

SB-100P Series
Designed for Maximum Efficiency and Versatility
We developed the SB-100P Series UV-A lamps to be very affordable,
super-high intensity “workhorses” for MPI and FPI inspections.
• Combines state-of-the-art innovations with proven features. The cord comes out of the
staycool, contoured handle to prevent tangling, and the crack-resistant, tempered filter
reduces replacement costs significantly.
• Lamp head and transformer base housings are constructed of a special heat-resistant
engineering polymer that ensures years of rugged use
• Lamp head is ergonomically designed and detaches easily from the transformer base for
comfortable, fatigue-free handling
• Transformer provides maximum power to the unit and features an indicator light to show
when the lamp is on
• Easily meets ASTM UV-A intensity specifications for FPI and MPI
• Available in concentrated spot (SB-100P) and diffused (SB-100PD) versions. Spot configuration
has a nominal steady-state UV-A intensity of 4,800 µW/cm 2 at 15 inches (38 cm). Diffused
configuration has a nominal steady-state UV-A intensity of 2,200 µW/cm 2 at 15 inches (38 cm).
• Bulbs feature average rated life of 5,000 hours
Both models come with a special heat-resistant, 3-wire secondary cord. The Also available: 100S/M-PQL upgraded, Premium Quality
primary and secondary cords are both 8 feet (2.4 m) long. Lamps are also Lighting (PQL), 100-watt, medium base, HID replacement
available with extended length primary or secondary cords, or with a 35 foot spot bulb, for SB-100P Series lamps. Average rated bulb life
(10.7 m) secondary cord housed in a retractable “flying” reel. Visit is 12,000 hours. With upgraded bulb, SB-100P lamp has a
www.spectroline.com for more details. nominal steady-state UV-A intensity of 7,500 μW/cm2 at 15
inches (38 cm).
Surface contour profile at 15 in (38 cm) Top intensity profile at 15 in (38 cm)
-4
6000 (-10)
5000 -3
(-8)
5000
4000 -2
(-5)
4000 -1
y-inches (cm)

2000 (-3)
2
µW/cm

3000 0
(0)
1000
1
2000 (3)

-4 (-10) 2
1000 -3 (-8) (5)
-2 (-5)
3
0 -1 (-3)
-4 0 (0) SB-100P (8)
)

-3
(CM

(-10) -2 1 (3) 4
(-8) -1
(-5) 2 (5) (10)
ES

(-3) 0 -4 -3 -2 -1 0 1 2 3 4
1
H

(0) 2 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

X-IN (3) 3
IN

CHE (5) 4 4 (10)


Y-

S (CM (8)
(10) x-inches (cm)
)
Surface contour profile at 15 in (38 cm) Top intensity profile at 15 in (38 cm)
-4
6000 (-10)
5000
-3
(-8)
5000
4000 -2
(-5)
4000 -1
y-inches (cm)

2000 (-3)
2
µW/cm

0
3000 (0)
1000
1
2000 (3)

-4 (-10) 2
1000 -3 (-8) (5)
-2 (-5)
3
0
-4
-1 (-3)
0 (0)
SB-100PD (8)
)

-3
(CM

(-10) -2 1 (3) 4
(-8) -1
(-5) 2 (5) (10)
ES

(-3) 0 -4 -3 -2 -1 0 1 2 3 4
1
H

(0) 2 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

X-IN (3) 3
IN

CHE (5) 4 4 (10)


Y-

S (CM (8)
(10) x-inches (cm)
)

9
UV HID INSPECTION LAMPS UV HID INSPECTION LAMPS

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4

FC-Series 6000 (-10)

-3
5000 (-8)

World’s Lightest Fan-Cooled, Portable 5000


-2
(-5)
4000
UV-A Lamps 4000 -1

Y-INCHES (CM)
(-3)

2
µW/cm
2000
0
NDT inspectors find that FC-Series UV-A lamps make 3000 (0)
prolonged inspections seem much shorter because 1000 1
2000 (3)
they provide cool operation and increased comfort.
2
-4 (-10) (5)
• Quiet, built-in fan dramatically reduces running temperature, 1000 -3 (-8)
provides more comfort and safety for users, and ensures long -2 (-5) 3
0 -1 (-3) (8)
bulb life. 0 (0) FC-100

)
-4

M
-3 4

(C
(-10) -2 1 (3)
• Ergonomically designed with the handle and cord at the balance (-8) -1 (10)

ES
(-5) 2 (5)
(-3) 0 -4 -3 -2 -1 0 1 2 3 4

H
point of the lamp head. As a result, the lamp can be held for long 1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
CHE (3) 3 4 (10)

Y-
periods with little user fatigue. S (C (5) 4
M) (8) X-INCHES (CM)
(10)
• Special remote lamp switch in the pistol grip prevents accidental
shutoff, while separate fan control switch allows for safe
cool-down. SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
• Lamp head is housed in a super-strong engineering polymer that -4
is dent-proof and impact-resistant. Weighs just 35/8 lbs (1.6 kg). 6000 (-10)

-3
• Easily meets ASTM UV-A intensity specifications for FPI and MPI (-8)
5000 5000
-2
• Bulb features average rated life of 5,000 hours (-5)

4000 4000 -1

Y-INCHES (CM)
(-3)
The FC-100 comes with a 100-watt bulb, available in concentrated

2
µW/cm
spot (FC-100) and diffused filter (FC-100D) versions. Spot configura- 2000 0
FC-100 3000 (0)
tion has a nominal steady-state UV-A intensity of 4,800 µW/cm 2 at
1
15 inches (38 cm). Diffused configuration has a nominal steady-state 2000 1000 (3)
UV-A intensity of 2,200 µW/cm 2 at 15 inches (38 cm). Both lamps 2
-4 (-10) (5)
come with 8 foot (2.4 m) primary and secondary cords. Lamp head 1000 -3 (-8)
weighs just 35/8 lbs (1.6 kg). -2 (-5) 3
0 -1 (-3) (8)
0 (0)

)
-4

M
-3 4
The FC-150 with a Built-In-Ballast™ 150-watt concentrated spot FC-100D

(C
(-10) -2 1 (3)
(-8) -1 (10)

ES
(-5) 2 (5)
bulb has a nominal steady-state UV-A intensity of 4,500 µW/cm 2 at (-3) 0 -4 -3 -2 -1 0 1 2 3 4

H
1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
15 inches (38 cm), has an 8 foot (2.4 m) power cord. Lamp head CHE (3) 3 4 (10)

Y-
S (C (5) 4
M) (8) X-INCHES (CM)
weighs just 31/2 lbs (1.6 kg). (10)

The FC-100M has the same specifications as the FC-100 model, but
is a direct replacement lamp for use with Magnaflux® magnetic
particle machines. SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4
Models are also available with extended length primary or secondary 6000 (-10)
FC-150
cords, or with a 35 foot (10.7 m) secondary cord housed in a retractable 5000 -3
(-8)
“flying” reel. Visit www.spectroline.com for more details. 5000
-2
4000 (-5)

4000 -1

Y-INCHES (CM)
(-3)
2000

2
µW/cm
Also available: 100S/M-PQL upgraded, Premium Quality Lighting (PQL), 100-watt, medium base, HID replacement spot 3000
0
(0)
bulb, for FC-100 Series lamps. Average rated bulb life is 12,000 hours. With the upgraded bulb, lamp has a nominal steady-state 1000
1
UV-A intensity of 7,500 µW/cm2 at 15 inches (38 cm). 2000 (3)

2
-4 (-10) (5)
®
1000
Magnaflux is a registered trademark of Magnaflux Corporation -3 (-8)
3
-2 (-5) (8)
0 -1 (-3) FC-150
0 (0) 4

)
-4

M
-3 (10)

(C
(-10) -2 1 (3)
(-8) -1

ES
(-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4
(-3) 0

H
1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

C
X-IN (0) 2

IN
CHE (3) 3 4 (10)

Y-
S (C (5) 4 X-INCHES (CM)
M) (8)
(10)

10 11
UV HID INSPECTION LAMPS UV HID INSPECTION LAMPS

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4

FC-Series 6000 (-10)

-3
5000 (-8)

World’s Lightest Fan-Cooled, Portable 5000


-2
(-5)
4000
UV-A Lamps 4000 -1

Y-INCHES (CM)
(-3)

2
µW/cm
2000
0
NDT inspectors find that FC-Series UV-A lamps make 3000 (0)
prolonged inspections seem much shorter because 1000 1
2000 (3)
they provide cool operation and increased comfort.
2
-4 (-10) (5)
• Quiet, built-in fan dramatically reduces running temperature, 1000 -3 (-8)
provides more comfort and safety for users, and ensures long -2 (-5) 3
0 -1 (-3) (8)
bulb life. 0 (0) FC-100

)
-4

M
-3 4

(C
(-10) -2 1 (3)
• Ergonomically designed with the handle and cord at the balance (-8) -1 (10)

ES
(-5) 2 (5)
(-3) 0 -4 -3 -2 -1 0 1 2 3 4

H
point of the lamp head. As a result, the lamp can be held for long 1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
CHE (3) 3 4 (10)

Y-
periods with little user fatigue. S (C (5) 4
M) (8) X-INCHES (CM)
(10)
• Special remote lamp switch in the pistol grip prevents accidental
shutoff, while separate fan control switch allows for safe
cool-down. SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
• Lamp head is housed in a super-strong engineering polymer that -4
is dent-proof and impact-resistant. Weighs just 35/8 lbs (1.6 kg). 6000 (-10)

-3
• Easily meets ASTM UV-A intensity specifications for FPI and MPI (-8)
5000 5000
-2
• Bulb features average rated life of 5,000 hours (-5)

4000 4000 -1

Y-INCHES (CM)
(-3)
The FC-100 comes with a 100-watt bulb, available in concentrated

2
µW/cm
spot (FC-100) and diffused filter (FC-100D) versions. Spot configura- 2000 0
FC-100 3000 (0)
tion has a nominal steady-state UV-A intensity of 4,800 µW/cm 2 at
1
15 inches (38 cm). Diffused configuration has a nominal steady-state 2000 1000 (3)
UV-A intensity of 2,200 µW/cm 2 at 15 inches (38 cm). Both lamps 2
-4 (-10) (5)
come with 8 foot (2.4 m) primary and secondary cords. Lamp head 1000 -3 (-8)
weighs just 35/8 lbs (1.6 kg). -2 (-5) 3
0 -1 (-3) (8)
0 (0)

)
-4

M
-3 4
The FC-150 with a Built-In-Ballast™ 150-watt concentrated spot FC-100D

(C
(-10) -2 1 (3)
(-8) -1 (10)

ES
(-5) 2 (5)
bulb has a nominal steady-state UV-A intensity of 4,500 µW/cm 2 at (-3) 0 -4 -3 -2 -1 0 1 2 3 4

H
1 3 (8)

C
X-IN (0) 2 (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

IN
15 inches (38 cm), has an 8 foot (2.4 m) power cord. Lamp head CHE (3) 3 4 (10)

Y-
S (C (5) 4
M) (8) X-INCHES (CM)
weighs just 31/2 lbs (1.6 kg). (10)

The FC-100M has the same specifications as the FC-100 model, but
is a direct replacement lamp for use with Magnaflux® magnetic
particle machines. SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4
Models are also available with extended length primary or secondary 6000 (-10)
FC-150
cords, or with a 35 foot (10.7 m) secondary cord housed in a retractable 5000 -3
(-8)
“flying” reel. Visit www.spectroline.com for more details. 5000
-2
4000 (-5)

4000 -1

Y-INCHES (CM)
(-3)
2000

2
µW/cm
Also available: 100S/M-PQL upgraded, Premium Quality Lighting (PQL), 100-watt, medium base, HID replacement spot 3000
0
(0)
bulb, for FC-100 Series lamps. Average rated bulb life is 12,000 hours. With the upgraded bulb, lamp has a nominal steady-state 1000
1
UV-A intensity of 7,500 µW/cm2 at 15 inches (38 cm). 2000 (3)

2
-4 (-10) (5)
®
1000
Magnaflux is a registered trademark of Magnaflux Corporation -3 (-8)
3
-2 (-5) (8)
0 -1 (-3) FC-150
0 (0) 4

)
-4

M
-3 (10)

(C
(-10) -2 1 (3)
(-8) -1

ES
(-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4
(-3) 0

H
1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)

C
X-IN (0) 2

IN
CHE (3) 3 4 (10)

Y-
S (C (5) 4 X-INCHES (CM)
M) (8)
(10)

10 11
UV HID INSPECTION LAMPS UV HID INSPECTION LAMPS

CH-50P/12
C-100PA Series Portable and Very Affordable High-Intensity UV-A Lamp
Compact, Lightweight, High-Intensity UV-A Lamp for NDT Inspections
Battery-operated lamp delivers UV-A light in tight
Compact lamp head provides users with maximum comfort. Easily fits in tight places that are taboo to areas that defy conventional lamps. “Instant-on”
larger lamps, making it ideal for spotting surface flaws in confined areas. operation enables you to perform inspections
immediately!
• This 100-watt lamp is powered by a magnetic ballast encapsulated
• Features a 50-watt bulb with nominal steady-state UV-A intensity
in a high-impact plastic housing.
of 1,200 µW/cm 2 at 15 inches (38 cm)
• Compact lamp head measures just 41/2 inches (11 cm) wide and
• Lamp head measures only 51/4 x 71/2 inches (13 x 19 cm) at its
weighs only 15/8 lbs (0.7 kg)
widest point, so it's easy to inspect in confined areas
• Features a spot bulb with a nominal steady-state UV-A intensity of
• Battery-operated unit weighs a mere 2 lbs (0.9 kg)
6,000 µW/cm 2 at 15 inches (38 cm)
• Very economical to operate, because it consumes 50% less
• Flexible, heat-resistant filter holder virtually eliminates filter move-
power than competitors' 12-volt lamps
ment during use, reduces the risk of breakage and prevents any
visible light leakage • Housing is made of a super-tough engineering polymer that's
impact-resistant and dent-proof
• Constructed of anodized aluminum with a stay-cool pistol grip for
extra safety and long life • Includes a 4 foot (1.2 m) cord with cigarette-lighter plug and a
1-foot (0.3 m) adapter cord with alligator clips. Connects to any
• Easily meets ASTM UV-A intensity specifications for FPI and MPI
12-volt battery or cigarette-lighter outlet. A 12 foot (3.6 m) exten-
• Bulb features average rated life of 5,000 hours sion cord is also provided.

C-100PA comes with 8 foot (2.4 m) primary and 8 foot secondary


cords
Note: A compact, lightweight battery pack (model BP-12A) is
C-100PAR comes with 8 foot (2.4 m) primary cord and 35 foot
available as an accessory for the CH-50P/12. It comes with a 12V,
(10.7 m) retractable secondary cord in “flying reel”. Also features
7 amp/hr sealed lead acid rechargeable battery, a charger and a
attached FP-50 filter protector/lamp stand.
nylon case with belt loop and shoulder strap. Permits field use
C-100PAX comes with 8 foot (2.4 m) primary and 20 foot (6.1 m) of the lamp in areas where there are no AC outlets.
secondary cords

Optional BP-12A
battery pack

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM) SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)

-4 -4
6000 (-10) (-10)
2000
-3 -3
(-8) 1800 (-8)
6000 2000
5000
-2 1600 -2
(-5) (-5)
5000
1400
4000 -1 -1
Y-INCHES (CM)

Y-INCHES (CM)
(-3) 1200 (-3)
4000
2

2
µW/cm

µW/cm
0 1000 0
3000 (0) 1000 (0)
2000
1
800 1
(3) (3)
2000 1000 600
2 2
-4 (-10) (5) 400 -4 (-10) (5)
1 000 -3 (-8) -3 (-8)
3 200 3
-2 (-5) -2 (-5)
(8) (8)
0 -1 (-3) 0 -1 (-3)
0 (0) 0 (0)
)

)
-4 4 -4 4
M

M
-3 -3
(C

(C
(-10) -2 1 (3) (10) (-10) -2 1 (3) (10)
(-8) -1 (-8) -1
ES

ES
(-5) 0 2 (5) -4 -3 -2 -1 0 1 2 3 4 (-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4
(-3) (-3) 0
H

H
(0) 1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10) 1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

C
X-IN 2 X-IN (0) 2
IN

IN
CHE (3) 3 (3) 3
(5) 4 (10) CHE 4 (10)
Y-

Y-
S (C (8) 4 X-INCHES (CM) S (C (5) 4 X-INCHES (CM)
M) (10) M) (8)
(10)

12 13
UV HID INSPECTION LAMPS UV HID INSPECTION LAMPS

CH-50P/12
C-100PA Series Portable and Very Affordable High-Intensity UV-A Lamp
Compact, Lightweight, High-Intensity UV-A Lamp for NDT Inspections
Battery-operated lamp delivers UV-A light in tight
Compact lamp head provides users with maximum comfort. Easily fits in tight places that are taboo to areas that defy conventional lamps. “Instant-on”
larger lamps, making it ideal for spotting surface flaws in confined areas. operation enables you to perform inspections
immediately!
• This 100-watt lamp is powered by a magnetic ballast encapsulated
• Features a 50-watt bulb with nominal steady-state UV-A intensity
in a high-impact plastic housing.
of 1,200 µW/cm 2 at 15 inches (38 cm)
• Compact lamp head measures just 41/2 inches (11 cm) wide and
• Lamp head measures only 51/4 x 71/2 inches (13 x 19 cm) at its
weighs only 15/8 lbs (0.7 kg)
widest point, so it's easy to inspect in confined areas
• Features a spot bulb with a nominal steady-state UV-A intensity of
• Battery-operated unit weighs a mere 2 lbs (0.9 kg)
6,000 µW/cm 2 at 15 inches (38 cm)
• Very economical to operate, because it consumes 50% less
• Flexible, heat-resistant filter holder virtually eliminates filter move-
power than competitors' 12-volt lamps
ment during use, reduces the risk of breakage and prevents any
visible light leakage • Housing is made of a super-tough engineering polymer that's
impact-resistant and dent-proof
• Constructed of anodized aluminum with a stay-cool pistol grip for
extra safety and long life • Includes a 4 foot (1.2 m) cord with cigarette-lighter plug and a
1-foot (0.3 m) adapter cord with alligator clips. Connects to any
• Easily meets ASTM UV-A intensity specifications for FPI and MPI
12-volt battery or cigarette-lighter outlet. A 12 foot (3.6 m) exten-
• Bulb features average rated life of 5,000 hours sion cord is also provided.

C-100PA comes with 8 foot (2.4 m) primary and 8 foot secondary


cords
Note: A compact, lightweight battery pack (model BP-12A) is
C-100PAR comes with 8 foot (2.4 m) primary cord and 35 foot
available as an accessory for the CH-50P/12. It comes with a 12V,
(10.7 m) retractable secondary cord in “flying reel”. Also features
7 amp/hr sealed lead acid rechargeable battery, a charger and a
attached FP-50 filter protector/lamp stand.
nylon case with belt loop and shoulder strap. Permits field use
C-100PAX comes with 8 foot (2.4 m) primary and 20 foot (6.1 m) of the lamp in areas where there are no AC outlets.
secondary cords

Optional BP-12A
battery pack

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM) SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)

-4 -4
6000 (-10) (-10)
2000
-3 -3
(-8) 1800 (-8)
6000 2000
5000
-2 1600 -2
(-5) (-5)
5000
1400
4000 -1 -1
Y-INCHES (CM)

Y-INCHES (CM)
(-3) 1200 (-3)
4000
2

2
µW/cm

µW/cm
0 1000 0
3000 (0) 1000 (0)
2000
1
800 1
(3) (3)
2000 1000 600
2 2
-4 (-10) (5) 400 -4 (-10) (5)
1 000 -3 (-8) -3 (-8)
3 200 3
-2 (-5) -2 (-5)
(8) (8)
0 -1 (-3) 0 -1 (-3)
0 (0) 0 (0)
)

)
-4 4 -4 4
M

M
-3 -3
(C

(C
(-10) -2 1 (3) (10) (-10) -2 1 (3) (10)
(-8) -1 (-8) -1
ES

ES
(-5) 0 2 (5) -4 -3 -2 -1 0 1 2 3 4 (-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4
(-3) (-3) 0
H

H
(0) 1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10) 1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
C

C
X-IN 2 X-IN (0) 2
IN

IN
CHE (3) 3 (3) 3
(5) 4 (10) CHE 4 (10)
Y-

Y-
S (C (8) 4 X-INCHES (CM) S (C (5) 4 X-INCHES (CM)
M) (10) M) (8)
(10)

12 13
UV STATIONARY LAMPS

UV-400 Series SuperFlood™ A weld defect...


Our Most Powerful UV-A Flood Lamps Designed Specifically for NDT
These super-powerful and versatile lamps have been specially
engineered for fluorescent penetrant and magnetic particle
inspection, parts degreasing inspections and wash station
inspections.
• Powerful, 400-watt metal halide bulb, combined with tempered, heat-resistant
low solarization UV filters provide the highest intensity over the largest area
• Easily mounts over automated magnetic particle systems or above penetrant
inspection booths for the most accurate inspections of even the largest parts
• Unique twin-filter system eliminates hazardous UV-B and UV-C radiation
escaping from lamp
• Compact design and built-in mounting features allow lamps to be positioned
anywhere – even in previously inaccessible areas

UV-400A features a concentrated-beam reflector designed to assure the highest concentrated UV-A intensity available. It has a
nominal steady-state UV-A intensity of 8,000 µW/cm2 at lamp center, measured at 15 inches (38 cm). Irradiates an area as large
as 16” x 10” (41 cm x 25 cm), producing a nominal steady-state UV-A irradiance of not less than 2,000 µW/cm2.

UV-400B features a unique broad-beam reflector designed to provide NDT inspectors with maximum uniformity of coverage over
the largest area. It has a nominal steady-state UV-A intensity of 4,000 µW/cm2 at lamp center, measured at 15 inches (38 cm).
The lamp irradiates an area as wide as 20” x 12” (51 cm x 31 cm) with unmatched uniformity, producing a nominal steady-state
UV-A irradiance of not less than 2,000 µW/cm2.

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) C US TOP INTENSITY PROFILE AT 15 IN (38 CM)

-15
10000 (-38)

9000 10000 -10


8000 (-25)
5000
7000 -5
(-13)
Y-INCHES (CM)

6000 4000
2
µW/cm

5000 0
2000 (0)
4000
1000 5
3000 (13)
2000
-15 (-38) 10
1000 -10 (-25) (25)
-5 (-13)
0 0 (0) UV-400A
)

15
M

-15 -10
(C

-5 5 (13) (38)
(-38)
(-25)
ES

(-13) 0 10 (25)
5 -15 -10 -5 0 5 10 15
H

(0)
C

X-IN (13) 10 15 (38) (-38) (-25) (-13) (0) (13) (25) (38)
IN

CHE (25) 15
Y-

S (C (38) X-INCHES (CM)


M)

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)

-15
10000 (-38)
5000

-10
(-25)
8000 4000
-5
(-13)
Y-INCHES (CM)

2000
6000
2
µW/cm

0
(0)
1000
4000
5
(13)

2000 -15 (-38) 10


-10 (-25)
-5 (-13) UV-400B
(25)
Revealed by the MAXIMA™ ML-3500S UV-A inspection lamp using the liquid
0 (0)
penetrant method.
)

-15 15
M

-10
(C

(-38) -5 5 (13) (38)


(-25)
ES

(-13) 0 10 (25)
5 -15 -10 -5 0 5 10 15
H

(0)
C

X-IN (13) 10 15 (38) (-38) (-25) (-13) (0) (13) (25) (38)
IN

CHE 15
Y-

S (C (25)
M) (38) X-INCHES (CM)

14 15
UV STATIONARY LAMPS

UV-400 Series SuperFlood™ A weld defect...


Our Most Powerful UV-A Flood Lamps Designed Specifically for NDT
These super-powerful and versatile lamps have been specially
engineered for fluorescent penetrant and magnetic particle
inspection, parts degreasing inspections and wash station
inspections.
• Powerful, 400-watt metal halide bulb, combined with tempered, heat-resistant
low solarization UV filters provide the highest intensity over the largest area
• Easily mounts over automated magnetic particle systems or above penetrant
inspection booths for the most accurate inspections of even the largest parts
• Unique twin-filter system eliminates hazardous UV-B and UV-C radiation
escaping from lamp
• Compact design and built-in mounting features allow lamps to be positioned
anywhere – even in previously inaccessible areas

UV-400A features a concentrated-beam reflector designed to assure the highest concentrated UV-A intensity available. It has a
nominal steady-state UV-A intensity of 8,000 µW/cm2 at lamp center, measured at 15 inches (38 cm). Irradiates an area as large
as 16” x 10” (41 cm x 25 cm), producing a nominal steady-state UV-A irradiance of not less than 2,000 µW/cm2.

UV-400B features a unique broad-beam reflector designed to provide NDT inspectors with maximum uniformity of coverage over
the largest area. It has a nominal steady-state UV-A intensity of 4,000 µW/cm2 at lamp center, measured at 15 inches (38 cm).
The lamp irradiates an area as wide as 20” x 12” (51 cm x 31 cm) with unmatched uniformity, producing a nominal steady-state
UV-A irradiance of not less than 2,000 µW/cm2.

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) C US TOP INTENSITY PROFILE AT 15 IN (38 CM)

-15
10000 (-38)

9000 10000 -10


8000 (-25)
5000
7000 -5
(-13)
Y-INCHES (CM)

6000 4000
2
µW/cm

5000 0
2000 (0)
4000
1000 5
3000 (13)
2000
-15 (-38) 10
1000 -10 (-25) (25)
-5 (-13)
0 0 (0) UV-400A
)

15
M

-15 -10
(C

-5 5 (13) (38)
(-38)
(-25)
ES

(-13) 0 10 (25)
5 -15 -10 -5 0 5 10 15
H

(0)
C

X-IN (13) 10 15 (38) (-38) (-25) (-13) (0) (13) (25) (38)
IN

CHE (25) 15
Y-

S (C (38) X-INCHES (CM)


M)

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)

-15
10000 (-38)
5000

-10
(-25)
8000 4000
-5
(-13)
Y-INCHES (CM)

2000
6000
2
µW/cm

0
(0)
1000
4000
5
(13)

2000 -15 (-38) 10


-10 (-25)
-5 (-13) UV-400B
(25)
Revealed by the MAXIMA™ ML-3500S UV-A inspection lamp using the liquid
0 (0)
penetrant method.
)

-15 15
M

-10
(C

(-38) -5 5 (13) (38)


(-25)
ES

(-13) 0 10 (25)
5 -15 -10 -5 0 5 10 15
H

(0)
C

X-IN (13) 10 15 (38) (-38) (-25) (-13) (0) (13) (25) (38)
IN

CHE 15
Y-

S (C (25)
M) (38) X-INCHES (CM)

14 15
BLUE LIGHT LED INSPECTION LAMPS BLUE LIGHT LED INSPECTION LAMPS

Introducing Our Newest LED Light Sources...in Blue Wavelengths!


The importance of high-intensity UV-A black lights for proper magnetic particle or penetrant NDT inspection is well established. However, a concern for UV safety has
always existed. Our new blue light inspection lamps address this concern. While still no substitute for UV-A lamps, blue light does provide the safety and convenience desired for
quick pre-inspection or screening of fluorescent particles in operating conditions with ambient light, saving time and limiting the use of black lights to only when necessary.

OPX-450 TRI-450
OPTIMAX™ 450 Rechargeable TRITAN™ 450 Multi-LED, Broad-Beam
Blue Light LED Flashlight Blue Light Lamp
(U.S. Patent No. 5,905,268; other patents pending) (U.S. Patent No. 5,905,268; other patents pending)

This versatile, cordless inspection lamp features a This lamp features three cool-running, ultra-high flux 450 nm
high-intensity, 450 nm blue light LED, a black anodized lamp blue light LEDs with a broad-beam configuration. This powerful
body and our patented, thin-film dichroic lens to filter out lamp provides a wider coverage area than conventional inspection
long-wave visible light. lamps, while its compact head design allows access into areas
inaccessible to larger inspection lamps. Ideal for most non-
• Nominal steady-state blue light intensity of 7,000 µW/cm2 at 15 inches destructive testing applications.
(38 cm)
• Nominal steady-state blue light intensity of 5,000 µW/cm2 at 15 inches (38 cm)
• 50,000-hour LED service life
• Large 5 inch (13 cm) diameter coverage area at 15 inches (38 cm)
• Electronic Intensity Stabilizer assures consistent performance.
with a minimum intensity of 2,000 µW/cm2
Beam strength will not weaken between charges!
• 50,000-hour LED service life
• Instant-on operation. Lamp reaches full intensity immediately!
• Rubber bumper with patented thin-film dichroic lens filters out long-wave
• Lightweight, cordless, ergonomic design eliminates fatigue visible light
• Portable and rugged. Anodized aluminum lamp body minimizes • Electronic Intensity Stabilizer ensures consistent LED performance
corrosion and stands up to years of heavy use
• Built-in fan keeps LEDs cool to maintain optimum light output
• Powered by a rechargeable NiMH battery. Provides 90 minutes of during extended use
continuous inspection between charges.
• Instant-on operation. Lamp reaches full intensity immediately!
• Rugged, ergonomic, angled lamp body provides safe,
Also available: TRITANTM 450M portable, battery-operated
Comes complete with smart AC and DC chargers, fatigue-free handling
AC/DC lamp kit. Includes TRITAN 450M blue light LED lamp,
yellow contrasting spectacles, belt holster and • Choice of 8 foot (2.4 m) or extra-long 20 foot (6.1 m) power cord rechargeable NiMH battery pack with adjustable shoulder strap
rugged, padded carrying case. AC charger with AC plug. Available in 120V, 230V, 240V or 100V models. and belt loop, AC and DC cord sets, smart AC charger, yellow
available in 120V, 230V, 240V and 100V models. contrasting spectacles and soft, lightweight carrying case. AC
• Includes yellow contrasting spectacles
charger available in 120V, 230V, 240V or 100V versions.

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM) SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4 -6
(-10) 6000 (-15)
10000 10000 5000
-3
9000 (-8) -4
5000 5000 (-10)
8000 -2 4000
(-5)
7000 4000 4000 -2
-1 (-5)
Y-INCHES (CM)

Y-INCHES (CM)
6000 (-3) 2000
2000 2
µW/cm
2

3000
µW/cm

0 0
5000 (0)
(0)
1000 1000
4000 1 2000 2
(3)
3000 (5)
2
2000 (5) 1000
-4 (-10) -6 (-15) 4
-3 (-8) -4 (-10) (10)
1000 3
-2 (-5) -2 (-5)
(8) 0
0 -1 (-3) 0 (0)

)
-6 6

M
0 (0)
)

-4 4 -4
M

(C
-3 (-15) -2 2 (5) (15)
(C

(-10) -2 1 (3) (10) (-10)

ES
(-8) -1 0 4 (10)
ES

(-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4 (-5) 2 -6 -4 -2 0 2 4 6

H
0 (0)

C
(-3)
H

1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10) X-IN (5) 4 6 (15) (-15) (-10) (-5) (0) (5) (10) (15)

IN
C

X-IN (0) 2 CHE 6


IN

Y-
CHE (3) 3 4 (10) S (C (10)
Y-

S (C (5) 4 X-INCHES (CM) M) (15) X-INCHES (CM)


M) (8)
(10)

16 17
BLUE LIGHT LED INSPECTION LAMPS BLUE LIGHT LED INSPECTION LAMPS

Introducing Our Newest LED Light Sources...in Blue Wavelengths!


The importance of high-intensity UV-A black lights for proper magnetic particle or penetrant NDT inspection is well established. However, a concern for UV safety has
always existed. Our new blue light inspection lamps address this concern. While still no substitute for UV-A lamps, blue light does provide the safety and convenience desired for
quick pre-inspection or screening of fluorescent particles in operating conditions with ambient light, saving time and limiting the use of black lights to only when necessary.

OPX-450 TRI-450
OPTIMAX™ 450 Rechargeable TRITAN™ 450 Multi-LED, Broad-Beam
Blue Light LED Flashlight Blue Light Lamp
(U.S. Patent No. 5,905,268; other patents pending) (U.S. Patent No. 5,905,268; other patents pending)

This versatile, cordless inspection lamp features a This lamp features three cool-running, ultra-high flux 450 nm
high-intensity, 450 nm blue light LED, a black anodized lamp blue light LEDs with a broad-beam configuration. This powerful
body and our patented, thin-film dichroic lens to filter out lamp provides a wider coverage area than conventional inspection
long-wave visible light. lamps, while its compact head design allows access into areas
inaccessible to larger inspection lamps. Ideal for most non-
• Nominal steady-state blue light intensity of 7,000 µW/cm2 at 15 inches destructive testing applications.
(38 cm)
• Nominal steady-state blue light intensity of 5,000 µW/cm2 at 15 inches (38 cm)
• 50,000-hour LED service life
• Large 5 inch (13 cm) diameter coverage area at 15 inches (38 cm)
• Electronic Intensity Stabilizer assures consistent performance.
with a minimum intensity of 2,000 µW/cm2
Beam strength will not weaken between charges!
• 50,000-hour LED service life
• Instant-on operation. Lamp reaches full intensity immediately!
• Rubber bumper with patented thin-film dichroic lens filters out long-wave
• Lightweight, cordless, ergonomic design eliminates fatigue visible light
• Portable and rugged. Anodized aluminum lamp body minimizes • Electronic Intensity Stabilizer ensures consistent LED performance
corrosion and stands up to years of heavy use
• Built-in fan keeps LEDs cool to maintain optimum light output
• Powered by a rechargeable NiMH battery. Provides 90 minutes of during extended use
continuous inspection between charges.
• Instant-on operation. Lamp reaches full intensity immediately!
• Rugged, ergonomic, angled lamp body provides safe,
Also available: TRITANTM 450M portable, battery-operated
Comes complete with smart AC and DC chargers, fatigue-free handling
AC/DC lamp kit. Includes TRITAN 450M blue light LED lamp,
yellow contrasting spectacles, belt holster and • Choice of 8 foot (2.4 m) or extra-long 20 foot (6.1 m) power cord rechargeable NiMH battery pack with adjustable shoulder strap
rugged, padded carrying case. AC charger with AC plug. Available in 120V, 230V, 240V or 100V models. and belt loop, AC and DC cord sets, smart AC charger, yellow
available in 120V, 230V, 240V and 100V models. contrasting spectacles and soft, lightweight carrying case. AC
• Includes yellow contrasting spectacles
charger available in 120V, 230V, 240V or 100V versions.

SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM) SURFACE CONTOUR PROFILE AT 15 IN (38 CM) TOP INTENSITY PROFILE AT 15 IN (38 CM)
-4 -6
(-10) 6000 (-15)
10000 10000 5000
-3
9000 (-8) -4
5000 5000 (-10)
8000 -2 4000
(-5)
7000 4000 4000 -2
-1 (-5)
Y-INCHES (CM)

Y-INCHES (CM)
6000 (-3) 2000
2000 2
µW/cm
2

3000
µW/cm

0 0
5000 (0)
(0)
1000 1000
4000 1 2000 2
(3)
3000 (5)
2
2000 (5) 1000
-4 (-10) -6 (-15) 4
-3 (-8) -4 (-10) (10)
1000 3
-2 (-5) -2 (-5)
(8) 0
0 -1 (-3) 0 (0)

)
-6 6

M
0 (0)
)

-4 4 -4
M

(C
-3 (-15) -2 2 (5) (15)
(C

(-10) -2 1 (3) (10) (-10)

ES
(-8) -1 0 4 (10)
ES

(-5) 2 (5) -4 -3 -2 -1 0 1 2 3 4 (-5) 2 -6 -4 -2 0 2 4 6

H
0 (0)

C
(-3)
H

1 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10) X-IN (5) 4 6 (15) (-15) (-10) (-5) (0) (5) (10) (15)

IN
C

X-IN (0) 2 CHE 6


IN

Y-
CHE (3) 3 4 (10) S (C (10)
Y-

S (C (5) 4 X-INCHES (CM) M) (15) X-INCHES (CM)


M) (8)
(10)

16 17
DIGITAL RADIOMETERS DIGITAL RADIOMETERS

XRP-3000 AccuMAX™
Digital Radiometer/Photometer
Features an advanced microprocessor-controlled readout unit with a
dual-wavelength sensor detector to measure both ultraviolet and visible light.
• Large, easy-to-read LCD screen
• Provides readouts for UV-A, visible irradiance or radiance
• Overall accuracy greater than + 5% per NIST standards
• Choice of direct or USB cable connection between sensor detector and readout unit
• Automatic zeroing, integration and signal hold
• Excellent cosine response
• User-defined power save and automatic shutoff
• Rugged meter housing features removable, protective rubber boot for better grip and to help prevent accidental breakage
• Sealed sensor housing and USB connection with water-resistant adapter
• Compact, lightweight and battery-operated for convenient use in the factory, field or anywhere measurements are needed
• Complies with ASTM specifications for MPI and FPI
• Comes complete with readout unit, dual-wavelength sensor detector, USB cable with water-resistant adapter, protective
rubber boot, two 9V alkaline batteries and padded carrying case.

SPECIFICATIONS

Readout Unit (XR-1000) XR-1000 readout unit with dual-wavelength XR-1000 readout unit with dual-wavelength
Resolution 4-digit autoranging display sensor detector connected directly to unit sensor detector connected to unit via USB cable
Screen 128 x 64 dot pixel chip on glass
STN transmissive monochrome LCD 2.8 in
(7.1 cm) diagonal illuminated (backlit)
Sample Rate 7.5 Hz (single sensor)
15 Hz (dual sensor) 10

Read Update 2 Hz
Overall Accuracy Better than + 5% with reference to NIST standards .9

Temperature Coefficient + 0.025%/°C (0 to 50°C)


Power Requirements Two 9V alkaline batteries (included) .8

Length 7.75 in (19.7 cm)

Relative Spectral Response


Width 4.25 in (10.8 cm) .7

Thickness 1.25 in (3.2 cm)


Weight 0.8 lb (360 g) .6

Dual UV-A/Visible Sensor Detector (XDS-1000) .5


Irradiance Range
UV-A Sensor 0-100 mW/cm2 (0-100,000 µW/cm2) .4
Visible Sensor 0-5,300 lux (0-500 fc)

Spectral Range .3

UV-A Sensor 320-400 nm


Visible Sensor 460-675 nm .2

Dimensions .1
Length 4.75 in (12.1 cm)
Width 2.0 in (5.1 cm) 0
Thickness 7/8 in (2.2 cm) 0 300nm 350nm 400nm 450nm 500nm 550nm 600nm 650nm 700nm 750nm
Weight 0.22 lb (100 g) Wavelength (nm)
USB Cable Length 5 ft (1.5 m)

18 19
DIGITAL RADIOMETERS DIGITAL RADIOMETERS

XRP-3000 AccuMAX™
Digital Radiometer/Photometer
Features an advanced microprocessor-controlled readout unit with a
dual-wavelength sensor detector to measure both ultraviolet and visible light.
• Large, easy-to-read LCD screen
• Provides readouts for UV-A, visible irradiance or radiance
• Overall accuracy greater than + 5% per NIST standards
• Choice of direct or USB cable connection between sensor detector and readout unit
• Automatic zeroing, integration and signal hold
• Excellent cosine response
• User-defined power save and automatic shutoff
• Rugged meter housing features removable, protective rubber boot for better grip and to help prevent accidental breakage
• Sealed sensor housing and USB connection with water-resistant adapter
• Compact, lightweight and battery-operated for convenient use in the factory, field or anywhere measurements are needed
• Complies with ASTM specifications for MPI and FPI
• Comes complete with readout unit, dual-wavelength sensor detector, USB cable with water-resistant adapter, protective
rubber boot, two 9V alkaline batteries and padded carrying case.

SPECIFICATIONS

Readout Unit (XR-1000) XR-1000 readout unit with dual-wavelength XR-1000 readout unit with dual-wavelength
Resolution 4-digit autoranging display sensor detector connected directly to unit sensor detector connected to unit via USB cable
Screen 128 x 64 dot pixel chip on glass
STN transmissive monochrome LCD 2.8 in
(7.1 cm) diagonal illuminated (backlit)
Sample Rate 7.5 Hz (single sensor)
15 Hz (dual sensor) 10

Read Update 2 Hz
Overall Accuracy Better than + 5% with reference to NIST standards .9

Temperature Coefficient + 0.025%/°C (0 to 50°C)


Power Requirements Two 9V alkaline batteries (included) .8

Length 7.75 in (19.7 cm)

Relative Spectral Response


Width 4.25 in (10.8 cm) .7

Thickness 1.25 in (3.2 cm)


Weight 0.8 lb (360 g) .6

Dual UV-A/Visible Sensor Detector (XDS-1000) .5


Irradiance Range
UV-A Sensor 0-100 mW/cm2 (0-100,000 µW/cm2) .4
Visible Sensor 0-5,300 lux (0-500 fc)

Spectral Range .3

UV-A Sensor 320-400 nm


Visible Sensor 460-675 nm .2

Dimensions .1
Length 4.75 in (12.1 cm)
Width 2.0 in (5.1 cm) 0
Thickness 7/8 in (2.2 cm) 0 300nm 350nm 400nm 450nm 500nm 550nm 600nm 650nm 700nm 750nm
Weight 0.22 lb (100 g) Wavelength (nm)
USB Cable Length 5 ft (1.5 m)

18 19
DIGITAL RADIOMETERS REPLACEMENT PARTS & ACCESSORIES

DM-365XA
Digital UV-A Radiometer
Provides increased accuracy for more
repeatable results.

• Measures UV-A light sources with overall accuracy of


+ 5% per NIST standards
• Autozeroing, excellent linearity and cosine response, BP-12A BP-20
solid-state design, compact, durable, simple operation, BATTERY PACK, Complete with RB-12S BATTERY PACK, Complete with BR-100
battery-level indicator Smart Charger, 12 Volt Rechargeable NiMH Smart Charger, 12 Volt Rechargeable NiMH
Battery and Nylon Carrying Case for CH-50P/12 Battery and Nylon Carrying Case for TRITAN™
• Sealed silicone photodiode protects against shock and and MAXIMATM ML-3500 Series Lamps TRI-365M and TRI-450M AC/DC Lamp Kits
humidity
• Sensor housing is constructed with series of baffles and
unique self-sealing mechanism to eliminate light leakage
• Compact, lightweight and battery operated so measure-
ments can be taken anywhere
• Complies with ASTM specifications for MPI and FPI

CC-75 CC-120A CC-350


CARRYING CASE CARRYING CASE CARRYING CASE
SPECIFICATIONS for CH-50P/12 Lamp for BIB-150P Series. for MAXIMA™ ML-3500
FC-Series and SB-100P Series Lamps
Series Lamps
Readout Unit
Resolution 10 µW/cm2
Screen 4½ digit, 7 segment, LED display
0.5 in (1.3 cm) high
Overall Accuracy Better than + 5% with reference to NIST standards
Temperature Coefficient + 0.025%/°C (0 to 50°C)
Irradiance Range 0-19,900 µW/cm2
Spectral Range 320-400 nm CC-365 CC-370A
Power Requirements Two “AA” alkaline batteries (included) CARRYING CASE SOFT CARRYING CASE
for OPTIMAX™ OPX-365 for TRITAN™ TRI-365M and
Length 7¼ in (18.4 cm) and OPX-450 Flashlights TRI-450M AC/DC Lamps

Width 3.5 in (8.9 cm)


Thickness 2 in (5.1 cm)
Weight 1 lb (0.45 kg)

Sensor Detector
Length 3 in (7.6 cm)
Width 2 in (5.1 cm)
UVS-30 UVS-40 UVG-50
Thickness 0.70 in (1.8 cm) SPECTACLES, SPECTACLES, GOGGLES,
Weight 1¼ lb (0.57 kg) UV-Absorbing Fluorescence-Enhancing UV-Absorbing

Cord Length 3 ft (91.4 cm)

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

20 21
DIGITAL RADIOMETERS REPLACEMENT PARTS & ACCESSORIES

DM-365XA
Digital UV-A Radiometer
Provides increased accuracy for more
repeatable results.

• Measures UV-A light sources with overall accuracy of


+ 5% per NIST standards
• Autozeroing, excellent linearity and cosine response, BP-12A BP-20
solid-state design, compact, durable, simple operation, BATTERY PACK, Complete with RB-12S BATTERY PACK, Complete with BR-100
battery-level indicator Smart Charger, 12 Volt Rechargeable NiMH Smart Charger, 12 Volt Rechargeable NiMH
Battery and Nylon Carrying Case for CH-50P/12 Battery and Nylon Carrying Case for TRITAN™
• Sealed silicone photodiode protects against shock and and MAXIMATM ML-3500 Series Lamps TRI-365M and TRI-450M AC/DC Lamp Kits
humidity
• Sensor housing is constructed with series of baffles and
unique self-sealing mechanism to eliminate light leakage
• Compact, lightweight and battery operated so measure-
ments can be taken anywhere
• Complies with ASTM specifications for MPI and FPI

CC-75 CC-120A CC-350


CARRYING CASE CARRYING CASE CARRYING CASE
SPECIFICATIONS for CH-50P/12 Lamp for BIB-150P Series. for MAXIMA™ ML-3500
FC-Series and SB-100P Series Lamps
Series Lamps
Readout Unit
Resolution 10 µW/cm2
Screen 4½ digit, 7 segment, LED display
0.5 in (1.3 cm) high
Overall Accuracy Better than + 5% with reference to NIST standards
Temperature Coefficient + 0.025%/°C (0 to 50°C)
Irradiance Range 0-19,900 µW/cm2
Spectral Range 320-400 nm CC-365 CC-370A
Power Requirements Two “AA” alkaline batteries (included) CARRYING CASE SOFT CARRYING CASE
for OPTIMAX™ OPX-365 for TRITAN™ TRI-365M and
Length 7¼ in (18.4 cm) and OPX-450 Flashlights TRI-450M AC/DC Lamps

Width 3.5 in (8.9 cm)


Thickness 2 in (5.1 cm)
Weight 1 lb (0.45 kg)

Sensor Detector
Length 3 in (7.6 cm)
Width 2 in (5.1 cm)
UVS-30 UVS-40 UVG-50
Thickness 0.70 in (1.8 cm) SPECTACLES, SPECTACLES, GOGGLES,
Weight 1¼ lb (0.57 kg) UV-Absorbing Fluorescence-Enhancing UV-Absorbing

Cord Length 3 ft (91.4 cm)

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

20 21
REPLACEMENT PARTS & ACCESSORIES REPLACEMENT PARTS & ACCESSORIES

100S
SPOT BULB, Ad-Medium Base, 100 Watt for SB-100P
and FC-Series Lamps BLE-35RAF
MDL BULB/ANODIZED REFLECTOR ASSEMBLY
for MAXIMA™ ML-3500 Series Lamps BLE-150BS-115/M BLE-150FC-115/M
BROAD-BEAM BULB, Self-Ballasted, 150 Watt for CONCENTRATED SPOT BULB, Self-Ballasted,
BIB-150P Series Lamps (115 volt version) 150 Watt for FC-150 Lamp (115 volt version)

100S/M
SPOT BULB, Medium Base, 100 Watt for SB-100P
and FC-Series Lamps
BLE-50/12
BULB, Set of three, for CH-50P/12 Lamp

BLE-150CS-100/M
CONCENTRATED SPOT BULB, Self-Ballasted, BLE-150FC-230/M
150 Watt for BIB-150P Series Lamps (100 volt version) CONCENTRATED SPOT BULB, Self-Ballasted,
150 Watt for FC-150 Lamp, (230 volt version)

100S/M-PQL
UPGRADED, PREMIUM QUALITY LIGHTING SPOT
BULB, Medium Base, 100 Watt for SB-100P and FC-100
Series Lamps
BLE-100S/MC
SPOT BULB, Compact, Medium Base, 100 Watt,
for C-100PA Series Lamps

BLE-150CS-115/M BLE-400
CONCENTRATED SPOT BULB, Self-Ballasted, METAL HALIDE BULB, 400 Watt for SuperFlood™
150 Watt for BIB-150P Series Lamps (115 volt version) UV-400 Series Lamps

BLE-35PRA BLE-125B
MDL BULB/POLISHED REFLECTOR ASSEMBLY BULB, 125 Watt BLB (Non-Certified) for SB-125
for MAXIMA™ ML-3500 Series Lamps Series Lamps. Manufactured by Phillips

BLE-150CS-230/M 119584
MDL BULB, 35 Watt for MAXIMA™ ML-3500
CONCENTRATED SPOT BULB, Self-Ballasted,
Series Lamps
150 Watt for BIB-150P Series Lamps (230 volt version)
BLE-125B/C
BLE-35RA BULB, 125 Watt BLB (Certified) for SB-125
MDL BULB/COATED REFLECTOR ASSEMBLY Series Lamps. Manufactured by Phillips
for MAXIMA™ ML-3500 Series Lamps

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

22 23
REPLACEMENT PARTS & ACCESSORIES REPLACEMENT PARTS & ACCESSORIES

100S
SPOT BULB, Ad-Medium Base, 100 Watt for SB-100P
and FC-Series Lamps BLE-35RAF
MDL BULB/ANODIZED REFLECTOR ASSEMBLY
for MAXIMA™ ML-3500 Series Lamps BLE-150BS-115/M BLE-150FC-115/M
BROAD-BEAM BULB, Self-Ballasted, 150 Watt for CONCENTRATED SPOT BULB, Self-Ballasted,
BIB-150P Series Lamps (115 volt version) 150 Watt for FC-150 Lamp (115 volt version)

100S/M
SPOT BULB, Medium Base, 100 Watt for SB-100P
and FC-Series Lamps
BLE-50/12
BULB, Set of three, for CH-50P/12 Lamp

BLE-150CS-100/M
CONCENTRATED SPOT BULB, Self-Ballasted, BLE-150FC-230/M
150 Watt for BIB-150P Series Lamps (100 volt version) CONCENTRATED SPOT BULB, Self-Ballasted,
150 Watt for FC-150 Lamp, (230 volt version)

100S/M-PQL
UPGRADED, PREMIUM QUALITY LIGHTING SPOT
BULB, Medium Base, 100 Watt for SB-100P and FC-100
Series Lamps
BLE-100S/MC
SPOT BULB, Compact, Medium Base, 100 Watt,
for C-100PA Series Lamps

BLE-150CS-115/M BLE-400
CONCENTRATED SPOT BULB, Self-Ballasted, METAL HALIDE BULB, 400 Watt for SuperFlood™
150 Watt for BIB-150P Series Lamps (115 volt version) UV-400 Series Lamps

BLE-35PRA BLE-125B
MDL BULB/POLISHED REFLECTOR ASSEMBLY BULB, 125 Watt BLB (Non-Certified) for SB-125
for MAXIMA™ ML-3500 Series Lamps Series Lamps. Manufactured by Phillips

BLE-150CS-230/M 119584
MDL BULB, 35 Watt for MAXIMA™ ML-3500
CONCENTRATED SPOT BULB, Self-Ballasted,
Series Lamps
150 Watt for BIB-150P Series Lamps (230 volt version)
BLE-125B/C
BLE-35RA BULB, 125 Watt BLB (Certified) for SB-125
MDL BULB/COATED REFLECTOR ASSEMBLY Series Lamps. Manufactured by Phillips
for MAXIMA™ ML-3500 Series Lamps

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

22 23
REPLACEMENT PARTS & ACCESSORIES REPLACEMENT PARTS & ACCESSORIES

FP-50
FILTER PROTECTOR/LAMP STAND for
C-100PA Series Lamps HGS-150A
120344 HEAT GUARD/STAND for BIB-150P and
TM
COATED SPOT REFLECTOR for MAXIMA ML-3500
2F123 BIB-150PX Lamps
Series Lamps
FILTER for CH-50P/12 and C-100PA Series Lamps

FP-175
FILTER PROTECTOR/LAMP STAND for BIB-150PR,
FC-Series and MAXIMA™ Series Lamps

120514
VF-100A
ANODIZED FLOOD REFLECTOR for
SPEC-STIK™ VERIFICATION FIXTURE for All
MAXIMATM ML-3500 Series Lamps
2F958 Spectroline® Sensors, as well as HID, TRITAN™
FILTER for BIB-150P Series, FC-Series and and OPTIMAX™ Series Lamps.
MAXIMA™ ML-3500 Series Lamps
NOTE: Lamp mounting accessories for TRITAN™
and OPTIMAX™ Series Lamps are sold separately
(see LH-200 and LH-300)
FP-365
FILTER PROTECTOR with Rubber Bumper/Borofloat®
Glass for TRITAN™ 365 Series Lamps

123378
POLISHED REFLECTOR for MAXIMA™ ML-3500
Series Lamps

2F350 LH-200
DIFFUSING FILTER for FC-Series and LAMP HOLDER for OPTIMAX™ OPX-365
MAXIMA™ ML-3500 Series Lamps and OPX-450 Flashlights (for use with VF-100A)
FP-450
FILTER PROTECTOR with Rubber Bumper/Dichroic
Filter for TRITAN™ 450 Series Lamps
2F110
UV-A FILTER for SuperFlood™ UV-400 Series Lamps

LH-300
DF-365 LAMP HOLDER for TRITAN™ Series Lamps
HGS-100A
2F400B DIFFUSING FILTER for OPTIMAX™ OPX-365 (for use with VF-100A, FA-100, WM-100, B-6 and W-6)
HEAT GUARD/STAND for SB-100P Series Lamps
UV-B BLOCKING FILTER for SuperFlood™ UV-400 Flashlight
Series Lamps

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

24 25
REPLACEMENT PARTS & ACCESSORIES REPLACEMENT PARTS & ACCESSORIES

FP-50
FILTER PROTECTOR/LAMP STAND for
C-100PA Series Lamps HGS-150A
120344 HEAT GUARD/STAND for BIB-150P and
TM
COATED SPOT REFLECTOR for MAXIMA ML-3500
2F123 BIB-150PX Lamps
Series Lamps
FILTER for CH-50P/12 and C-100PA Series Lamps

FP-175
FILTER PROTECTOR/LAMP STAND for BIB-150PR,
FC-Series and MAXIMA™ Series Lamps

120514
VF-100A
ANODIZED FLOOD REFLECTOR for
SPEC-STIK™ VERIFICATION FIXTURE for All
MAXIMATM ML-3500 Series Lamps
2F958 Spectroline® Sensors, as well as HID, TRITAN™
FILTER for BIB-150P Series, FC-Series and and OPTIMAX™ Series Lamps.
MAXIMA™ ML-3500 Series Lamps
NOTE: Lamp mounting accessories for TRITAN™
and OPTIMAX™ Series Lamps are sold separately
(see LH-200 and LH-300)
FP-365
FILTER PROTECTOR with Rubber Bumper/Borofloat®
Glass for TRITAN™ 365 Series Lamps

123378
POLISHED REFLECTOR for MAXIMA™ ML-3500
Series Lamps

2F350 LH-200
DIFFUSING FILTER for FC-Series and LAMP HOLDER for OPTIMAX™ OPX-365
MAXIMA™ ML-3500 Series Lamps and OPX-450 Flashlights (for use with VF-100A)
FP-450
FILTER PROTECTOR with Rubber Bumper/Dichroic
Filter for TRITAN™ 450 Series Lamps
2F110
UV-A FILTER for SuperFlood™ UV-400 Series Lamps

LH-300
DF-365 LAMP HOLDER for TRITAN™ Series Lamps
HGS-100A
2F400B DIFFUSING FILTER for OPTIMAX™ OPX-365 (for use with VF-100A, FA-100, WM-100, B-6 and W-6)
HEAT GUARD/STAND for SB-100P Series Lamps
UV-B BLOCKING FILTER for SuperFlood™ UV-400 Flashlight
Series Lamps

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

24 25
REPLACEMENT PARTS & ACCESSORIES REPLACEMENT PARTS & ACCESSORIES

124828
LH-600 CORD SET, 8 Foot, 7 Pin for MAXIMA™ ML-3500
HOLSTER for OPTIMAX TM
OPX-365 and RB-300
Series Lamps (115V and 100V versions) SMART AC CHARGER for OPTIMAX™ XCC-100
OPX-450 Flashlights
OPX-365 and OPX-450 Flashlights CARRYING CASE for AccuMAX™ XRP-3000 Meter

RB-12S XRB-100
SMART BATTERY CHARGER for BP-12A RB-300DC RUBBER BOOT for AccuMAX™ XR-1000 Readout Unit
Battery Pack 12V DC CHARGER for OPTIMAX™
WM-100
WALL MOUNTING BRACKET for All Spectroline® HID OPX-365 and OPX-450 Flashlights
and TRITAN™ Series Lamps

AB-100
ADAPTER BRACKET for Mounting Transformer-Based
BR-100 125608 Spectroline® HID Lamps onto a Magnaflux® Wet
124826 SMART BATTERY CHARGER for BP-20
CORD SET, 2 Foot, 7 Pin for MAXIMA™ ML-3500 BATTERY STICK with Tailcap for OPTIMAX™ Horizontal Mag Machine
Battery Pack OPX-365 and OPX-450 Flashlights
Series Lamps (12V DC version)

AF-100
124827 PSA-200 XCB-100 ABSORPTION FILTER/SPLASH GUARD ASSEMBLY
CORD SET, 8 Foot, 7 Pin for MAXIMA™ ML-3500 POWER SUPPLY ADAPTER with a 12V DC charging WATER-RESISTANT USB CABLE with adapter for for SB-100P, BIB-150P, FC- and MAXIMA™ ML-3500
Series Lamps (230V version) cord for TRITAN™ TRI-365M and TRI-450M Series AccuMAX™ Meter Series Lamps (for rubber filter holder design)
Lamps

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

26 27
REPLACEMENT PARTS & ACCESSORIES REPLACEMENT PARTS & ACCESSORIES

124828
LH-600 CORD SET, 8 Foot, 7 Pin for MAXIMA™ ML-3500
HOLSTER for OPTIMAX TM
OPX-365 and RB-300
Series Lamps (115V and 100V versions) SMART AC CHARGER for OPTIMAX™ XCC-100
OPX-450 Flashlights
OPX-365 and OPX-450 Flashlights CARRYING CASE for AccuMAX™ XRP-3000 Meter

RB-12S XRB-100
SMART BATTERY CHARGER for BP-12A RB-300DC RUBBER BOOT for AccuMAX™ XR-1000 Readout Unit
Battery Pack 12V DC CHARGER for OPTIMAX™
WM-100
WALL MOUNTING BRACKET for All Spectroline® HID OPX-365 and OPX-450 Flashlights
and TRITAN™ Series Lamps

AB-100
ADAPTER BRACKET for Mounting Transformer-Based
BR-100 125608 Spectroline® HID Lamps onto a Magnaflux® Wet
124826 SMART BATTERY CHARGER for BP-20
CORD SET, 2 Foot, 7 Pin for MAXIMA™ ML-3500 BATTERY STICK with Tailcap for OPTIMAX™ Horizontal Mag Machine
Battery Pack OPX-365 and OPX-450 Flashlights
Series Lamps (12V DC version)

AF-100
124827 PSA-200 XCB-100 ABSORPTION FILTER/SPLASH GUARD ASSEMBLY
CORD SET, 8 Foot, 7 Pin for MAXIMA™ ML-3500 POWER SUPPLY ADAPTER with a 12V DC charging WATER-RESISTANT USB CABLE with adapter for for SB-100P, BIB-150P, FC- and MAXIMA™ ML-3500
Series Lamps (230V version) cord for TRITAN™ TRI-365M and TRI-450M Series AccuMAX™ Meter Series Lamps (for rubber filter holder design)
Lamps

Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance.

26 27
REPLACEMENT PARTS & ACCESSORIES COMPANY & WARRANTY INFORMATION

Company Background
Spectronics Corporation is the world’s leading manufacturer of ultraviolet equipment and fluorescent materials.
Spectronics supplies over 1,000 different products for the nondestructive testing, laboratory, biotechnology, industrial,
electronics, semi-conductor, forensics, financial, automotive, HVAC/R and other markets.

Spectronics’ modern, 100,000 square-foot


manufacturing facility and office headquarters is
located in Westbury, New York. Nearly 200 per-
sonnel are involved in all phases of research and
development, manufacturing, sales, marketing,
customer service, and logistical and technical
AF-100A support.
ABSORPTION FILTER/SPLASH GUARD ASSEMBLY
for SB-100P, BIB-150P, FC- and MAXIMA™ ML-3500 Over five decades since its inception, the goal
Series Lamps (for plastic filter holder design) of Spectronics is still the same — to produce
effective, top-quality products with the utmost
dedication to customer satisfaction.
SPECTRONICS CORPORATION

AF-125
ABSORPTION FILTER/SPLASH GUARD ASSEMBLY
for SB-125 Lamp
B-6
BENCH MOUNT for All Spectroline® HID and
TRITAN™ Series Lamps
Warranty
All equipment is warranted against defects in manufacture. Spectronics Corporation’s obligation under this
warranty is limited to repairing or replacing, at the option of Spectronics Corporation, any part(s) of the product
which, if properly installed, used and maintained, proves upon factory examination to have been defective in
materials or workmanship within 12 months from the date of delivery to the customer.

This warranty does not apply to any component which (1) is normally consumed in operation or (2) has a
normal life inherently shorter than the warranty stated. For example, bulbs, filters and rechargeable batteries are
warranted for 30 days. In addition, Spectronics Corporation does not warrant any instrument that has been
subjected to misuse, negligence or accident, or has been repaired or altered by anyone other than Spectronics
Corporation.

This warranty is in place of all other warranties of quality. There are no other warranties either oral, written, express,
implied or statutory. IMPLIED WARRANTIES OF FITNESS FOR PURPOSE AND MERCHANTABILITY ARE
EXCLUDED. This warranty and your remedies thereunder are solely as stated in this form. In no event shall
Spectronics Corporation be liable for special, indirect, incidental or consequential damages, nor for any damages
W-6 arising out of delay in shipment or production.
FA-100 BENCH MOUNT for All Spectroline® HID and
®
FLEXIBLE ARM for All Spectroline HID and
TRITAN™ Series Lamps
TRITAN™ Series Lamps

PRODUCT SPECIFICATIONS
Spectronics Corporation reserves the right to alter product specifications without notice. Spectronics is under no
Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. obligation to make similar changes in its products previously produced.

28 29
REPLACEMENT PARTS & ACCESSORIES COMPANY & WARRANTY INFORMATION

Company Background
Spectronics Corporation is the world’s leading manufacturer of ultraviolet equipment and fluorescent materials.
Spectronics supplies over 1,000 different products for the nondestructive testing, laboratory, biotechnology, industrial,
electronics, semi-conductor, forensics, financial, automotive, HVAC/R and other markets.

Spectronics’ modern, 100,000 square-foot


manufacturing facility and office headquarters is
located in Westbury, New York. Nearly 200 per-
sonnel are involved in all phases of research and
development, manufacturing, sales, marketing,
customer service, and logistical and technical
AF-100A support.
ABSORPTION FILTER/SPLASH GUARD ASSEMBLY
for SB-100P, BIB-150P, FC- and MAXIMA™ ML-3500 Over five decades since its inception, the goal
Series Lamps (for plastic filter holder design) of Spectronics is still the same — to produce
effective, top-quality products with the utmost
dedication to customer satisfaction.
SPECTRONICS CORPORATION

AF-125
ABSORPTION FILTER/SPLASH GUARD ASSEMBLY
for SB-125 Lamp
B-6
BENCH MOUNT for All Spectroline® HID and
TRITAN™ Series Lamps
Warranty
All equipment is warranted against defects in manufacture. Spectronics Corporation’s obligation under this
warranty is limited to repairing or replacing, at the option of Spectronics Corporation, any part(s) of the product
which, if properly installed, used and maintained, proves upon factory examination to have been defective in
materials or workmanship within 12 months from the date of delivery to the customer.

This warranty does not apply to any component which (1) is normally consumed in operation or (2) has a
normal life inherently shorter than the warranty stated. For example, bulbs, filters and rechargeable batteries are
warranted for 30 days. In addition, Spectronics Corporation does not warrant any instrument that has been
subjected to misuse, negligence or accident, or has been repaired or altered by anyone other than Spectronics
Corporation.

This warranty is in place of all other warranties of quality. There are no other warranties either oral, written, express,
implied or statutory. IMPLIED WARRANTIES OF FITNESS FOR PURPOSE AND MERCHANTABILITY ARE
EXCLUDED. This warranty and your remedies thereunder are solely as stated in this form. In no event shall
Spectronics Corporation be liable for special, indirect, incidental or consequential damages, nor for any damages
W-6 arising out of delay in shipment or production.
FA-100 BENCH MOUNT for All Spectroline® HID and
®
FLEXIBLE ARM for All Spectroline HID and
TRITAN™ Series Lamps
TRITAN™ Series Lamps

PRODUCT SPECIFICATIONS
Spectronics Corporation reserves the right to alter product specifications without notice. Spectronics is under no
Using genuine Spectroline ® replacement parts ensures that lamps will operate at their optimum performance. obligation to make similar changes in its products previously produced.

28 29
CUSTOMER SERVICE & SUPPORT PRODUCT INDEX

Product/Customer Support & Technical Assistance


Product literature, instructions and a full staff of trained customer service representatives and technical service
engineers are available for support. Additional product information and support are available on our website.
UV LED INSPECTION LAMPS REPLACEMENT PARTS & ACCESSORIES LH-200 . . . . . . . . . . . . . . . . . . . . . . . 25

OPX-365 . . . . . . . . . . . . . . . . . . . . . . . 4 AB-100 . . . . . . . . . . . . . . . . . . . . . . . 27 LH-300 . . . . . . . . . . . . . . . . . . . . . . . . 25

• Order Information • Technical Assistance TRI-365 . . . . . . . . . . . . . . . . . . . . . . . 5 AF-100 . . . . . . . . . . . . . . . . . . . . . . . 27 LH-600 . . . . . . . . . . . . . . . . . . . . . . . 26

TRI-365M . . . . . . . . . . . . . . . . . . . . . . 5 AF-100A . . . . . . . . . . . . . . . . . . . . . . 28 PSA-200 . . . . . . . . . . . . . . . . . . . . . . 26


• Local Sales Representatives • Authorized Distributors AF-125 . . . . . . . . . . . . . . . . . . . . . . . 28 RB-12S . . . . . . . . . . . . . . . . . . . . . . . 26
UV HID INSPECTION LAMPS
B-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 RB-300 . . . . . . . . . . . . . . . . . . . . . . . 27
BIB-150P (Broad-beam) . . . . . . . . . . . . 8
BLE-35PRA . . . . . . . . . . . . . . . . . . . . 22 RB-300DC . . . . . . . . . . . . . . . . . . . . . 27
BIB-150P (Concentrated Spot) . . . . . . . . 8
BLE-35RA . . . . . . . . . . . . . . . . . . . . . 22 UVG-50 . . . . . . . . . . . . . . . . . . . . . . . 21
C-100PA . . . . . . . . . . . . . . . . . . . . . . 12
BLE-35RAF . . . . . . . . . . . . . . . . . . . 22 UVS-30 . . . . . . . . . . . . . . . . . . . . . . . 21
C-100PAR . . . . . . . . . . . . . . . . . . . . . 12
BLE-50/12 . . . . . . . . . . . . . . . . . . . . 22 UVS-40 . . . . . . . . . . . . . . . . . . . . . . . 21
C-100PAX . . . . . . . . . . . . . . . . . . . . . 12
BLE-100S/MC . . . . . . . . . . . . . . . . . 22 VF-100A . . . . . . . . . . . . . . . . . . . . . . 25
CH-50P/12 . . . . . . . . . . . . . . . . . . . . . 13
BLE-125B . . . . . . . . . . . . . . . . . . . . . 22 W-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 28
FC-100 (Spot) . . . . . . . . . . . . . . . . . . . 10 WM-100 . . . . . . . . . . . . . . . . . . . . . . 26
BLE-125B/C . . . . . . . . . . . . . . . . . . . 22
FC-100 (Diffused) . . . . . . . . . . . . . . . . 10 XCB-100 . . . . . . . . . . . . . . . . . . . . . . 27
BLE-150BS-115/M . . . . . . . . . . . . . . 23
FC-100M . . . . . . . . . . . . . . . . . . . . . . 10 BLE-150CS-100/M . . . . . . . . . . . . . . 23 XCC-100 . . . . . . . . . . . . . . . . . . . . . . 27
FC-150. . . . . . . . . . . . . . . . . . . . . . . . 10 BLE-150CS-115/M . . . . . . . . . . . . . . 23 XRB-100 . . . . . . . . . . . . . . . . . . . . . . 27
FC-150X . . . . . . . . . . . . . . . . . . . . . 10 BLE-150CS-230/M . . . . . . . . . . . . . . 23 100S . . . . . . . . . . . . . . . . . . . . . . . . . 22
ML-3500D . . . . . . . . . . . . . . . . . . . . . . 6 BLE-150FC-115/M . . . . . . . . . . . . . . 23 100S/M . . . . . . . . . . . . . . . . . . . . . . . 22
ML-3500FL . . . . . . . . . . . . . . . . . . . . . 6 BLE-150FC-230/M . . . . . . . . . . . . . . 23 100S/M-PQL . . . . . . . . . . . . . . . . . . . 22

ML-3500MD . . . . . . . . . . . . . . . . . . . . . 6 BLE-400 . . . . . . . . . . . . . . . . . . . . . . 23 119584 . . . . . . . . . . . . . . . . . . . . . . . 23

ML-3500MFL . . . . . . . . . . . . . . . . . . . . 6 BP-12A . . . . . . . . . . . . . . . . . . . . . . . 21 120344 . . . . . . . . . . . . . . . . . . . . . . . 24

CUSTOMER SERVICE TECHNICAL ASSISTANCE ML-3500S . . . . . . . . . . . . . . . . . . . . . . 6 BP-20 . . . . . . . . . . . . . . . . . . . . . . . . 21 120514. . . . . . . . . . . . . . . . . . . . . . . . 24

SB-100P . . . . . . . . . . . . . . . . . . . . . . . 9 BR-100 . . . . . . . . . . . . . . . . . . . . . . . 26 123378 . . . . . . . . . . . . . . . . . . . . . . . 24

SB-100PD . . . . . . . . . . . . . . . . . . . . . . 9 CC-75 . . . . . . . . . . . . . . . . . . . . . . . . 21 124826 . . . . . . . . . . . . . . . . . . . . . . . 26

CC-120A . . . . . . . . . . . . . . . . . . . . . . 21 124827 . . . . . . . . . . . . . . . . . . . . . . . 26
UV STATIONARY LAMP
CC-350 . . . . . . . . . . . . . . . . . . . . . . . 21 124828 . . . . . . . . . . . . . . . . . . . . . . . 26
Call Toll-Free: UV-400A . . . . . . . . . . . . . . . . . . . . . . 14
CC-365 . . . . . . . . . . . . . . . . . . . . . . . 21 125608 . . . . . . . . . . . . . . . . . . . . . . . 27

1-800-274-8888 UV-400B . . . . . . . . . . . . . . . . . . . . . . 14
CC-370A . . . . . . . . . . . . . . . . . . . . . . 21 2F110 . . . . . . . . . . . . . . . . . . . . . . . . 24

(Outside the U.S. and Canada: 516-333-4840) BLUE LIGHT LED INSPECTION LAMPS DF-365 . . . . . . . . . . . . . . . . . . . . . . . 24 2F123 . . . . . . . . . . . . . . . . . . . . . . . . 24

FA-100 . . . . . . . . . . . . . . . . . . . . . . . 28 2F350 . . . . . . . . . . . . . . . . . . . . . . . . 24
OPX-450 . . . . . . . . . . . . . . . . . . . . . . 16
Fax Toll-Free: TRI-450 . . . . . . . . . . . . . . . . . . . . . . . 17
FP-50 . . . . . . . . . . . . . . . . . . . . . . . . 25 2F400B . . . . . . . . . . . . . . . . . . . . . . . 24

1-800-491-6868 TRI-450M. . . . . . . . . . . . . . . . . . . . . . 17
FP-175 . . . . . . . . . . . . . . . . . . . . . . . 25 2F958 . . . . . . . . . . . . . . . . . . . . . . . . 24

FP-365 . . . . . . . . . . . . . . . . . . . . . . . 25
(Outside the U.S. and Canada: 516-333-4859) DIGITAL RADIOMETERS FP-450 . . . . . . . . . . . . . . . . . . . . . . . 25
DM-365XA . . . . . . . . . . . . . . . . . . . . 20 HGS-100A . . . . . . . . . . . . . . . . . . . . 25
Website XRP-3000 . . . . . . . . . . . . . . . . . . . . . 18 HGS-150A . . . . . . . . . . . . . . . . . . . . 25
www.spectroline.com

30 31
CUSTOMER SERVICE & SUPPORT PRODUCT INDEX

Product/Customer Support & Technical Assistance


Product literature, instructions and a full staff of trained customer service representatives and technical service
engineers are available for support. Additional product information and support are available on our website.
UV LED INSPECTION LAMPS REPLACEMENT PARTS & ACCESSORIES LH-200 . . . . . . . . . . . . . . . . . . . . . . . 25

OPX-365 . . . . . . . . . . . . . . . . . . . . . . . 4 AB-100 . . . . . . . . . . . . . . . . . . . . . . . 27 LH-300 . . . . . . . . . . . . . . . . . . . . . . . . 25

• Order Information • Technical Assistance TRI-365 . . . . . . . . . . . . . . . . . . . . . . . 5 AF-100 . . . . . . . . . . . . . . . . . . . . . . . 27 LH-600 . . . . . . . . . . . . . . . . . . . . . . . 26

TRI-365M . . . . . . . . . . . . . . . . . . . . . . 5 AF-100A . . . . . . . . . . . . . . . . . . . . . . 28 PSA-200 . . . . . . . . . . . . . . . . . . . . . . 26


• Local Sales Representatives • Authorized Distributors AF-125 . . . . . . . . . . . . . . . . . . . . . . . 28 RB-12S . . . . . . . . . . . . . . . . . . . . . . . 26
UV HID INSPECTION LAMPS
B-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 28 RB-300 . . . . . . . . . . . . . . . . . . . . . . . 27
BIB-150P (Broad-beam) . . . . . . . . . . . . 8
BLE-35PRA . . . . . . . . . . . . . . . . . . . . 22 RB-300DC . . . . . . . . . . . . . . . . . . . . . 27
BIB-150P (Concentrated Spot) . . . . . . . . 8
BLE-35RA . . . . . . . . . . . . . . . . . . . . . 22 UVG-50 . . . . . . . . . . . . . . . . . . . . . . . 21
C-100PA . . . . . . . . . . . . . . . . . . . . . . 12
BLE-35RAF . . . . . . . . . . . . . . . . . . . 22 UVS-30 . . . . . . . . . . . . . . . . . . . . . . . 21
C-100PAR . . . . . . . . . . . . . . . . . . . . . 12
BLE-50/12 . . . . . . . . . . . . . . . . . . . . 22 UVS-40 . . . . . . . . . . . . . . . . . . . . . . . 21
C-100PAX . . . . . . . . . . . . . . . . . . . . . 12
BLE-100S/MC . . . . . . . . . . . . . . . . . 22 VF-100A . . . . . . . . . . . . . . . . . . . . . . 25
CH-50P/12 . . . . . . . . . . . . . . . . . . . . . 13
BLE-125B . . . . . . . . . . . . . . . . . . . . . 22 W-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 28
FC-100 (Spot) . . . . . . . . . . . . . . . . . . . 10 WM-100 . . . . . . . . . . . . . . . . . . . . . . 26
BLE-125B/C . . . . . . . . . . . . . . . . . . . 22
FC-100 (Diffused) . . . . . . . . . . . . . . . . 10 XCB-100 . . . . . . . . . . . . . . . . . . . . . . 27
BLE-150BS-115/M . . . . . . . . . . . . . . 23
FC-100M . . . . . . . . . . . . . . . . . . . . . . 10 BLE-150CS-100/M . . . . . . . . . . . . . . 23 XCC-100 . . . . . . . . . . . . . . . . . . . . . . 27
FC-150. . . . . . . . . . . . . . . . . . . . . . . . 10 BLE-150CS-115/M . . . . . . . . . . . . . . 23 XRB-100 . . . . . . . . . . . . . . . . . . . . . . 27
FC-150X . . . . . . . . . . . . . . . . . . . . . 10 BLE-150CS-230/M . . . . . . . . . . . . . . 23 100S . . . . . . . . . . . . . . . . . . . . . . . . . 22
ML-3500D . . . . . . . . . . . . . . . . . . . . . . 6 BLE-150FC-115/M . . . . . . . . . . . . . . 23 100S/M . . . . . . . . . . . . . . . . . . . . . . . 22
ML-3500FL . . . . . . . . . . . . . . . . . . . . . 6 BLE-150FC-230/M . . . . . . . . . . . . . . 23 100S/M-PQL . . . . . . . . . . . . . . . . . . . 22

ML-3500MD . . . . . . . . . . . . . . . . . . . . . 6 BLE-400 . . . . . . . . . . . . . . . . . . . . . . 23 119584 . . . . . . . . . . . . . . . . . . . . . . . 23

ML-3500MFL . . . . . . . . . . . . . . . . . . . . 6 BP-12A . . . . . . . . . . . . . . . . . . . . . . . 21 120344 . . . . . . . . . . . . . . . . . . . . . . . 24

CUSTOMER SERVICE TECHNICAL ASSISTANCE ML-3500S . . . . . . . . . . . . . . . . . . . . . . 6 BP-20 . . . . . . . . . . . . . . . . . . . . . . . . 21 120514. . . . . . . . . . . . . . . . . . . . . . . . 24

SB-100P . . . . . . . . . . . . . . . . . . . . . . . 9 BR-100 . . . . . . . . . . . . . . . . . . . . . . . 26 123378 . . . . . . . . . . . . . . . . . . . . . . . 24

SB-100PD . . . . . . . . . . . . . . . . . . . . . . 9 CC-75 . . . . . . . . . . . . . . . . . . . . . . . . 21 124826 . . . . . . . . . . . . . . . . . . . . . . . 26

CC-120A . . . . . . . . . . . . . . . . . . . . . . 21 124827 . . . . . . . . . . . . . . . . . . . . . . . 26
UV STATIONARY LAMP
CC-350 . . . . . . . . . . . . . . . . . . . . . . . 21 124828 . . . . . . . . . . . . . . . . . . . . . . . 26
Call Toll-Free: UV-400A . . . . . . . . . . . . . . . . . . . . . . 14
CC-365 . . . . . . . . . . . . . . . . . . . . . . . 21 125608 . . . . . . . . . . . . . . . . . . . . . . . 27

1-800-274-8888 UV-400B . . . . . . . . . . . . . . . . . . . . . . 14
CC-370A . . . . . . . . . . . . . . . . . . . . . . 21 2F110 . . . . . . . . . . . . . . . . . . . . . . . . 24

(Outside the U.S. and Canada: 516-333-4840) BLUE LIGHT LED INSPECTION LAMPS DF-365 . . . . . . . . . . . . . . . . . . . . . . . 24 2F123 . . . . . . . . . . . . . . . . . . . . . . . . 24

FA-100 . . . . . . . . . . . . . . . . . . . . . . . 28 2F350 . . . . . . . . . . . . . . . . . . . . . . . . 24
OPX-450 . . . . . . . . . . . . . . . . . . . . . . 16
Fax Toll-Free: TRI-450 . . . . . . . . . . . . . . . . . . . . . . . 17
FP-50 . . . . . . . . . . . . . . . . . . . . . . . . 25 2F400B . . . . . . . . . . . . . . . . . . . . . . . 24

1-800-491-6868 TRI-450M. . . . . . . . . . . . . . . . . . . . . . 17
FP-175 . . . . . . . . . . . . . . . . . . . . . . . 25 2F958 . . . . . . . . . . . . . . . . . . . . . . . . 24

FP-365 . . . . . . . . . . . . . . . . . . . . . . . 25
(Outside the U.S. and Canada: 516-333-4859) DIGITAL RADIOMETERS FP-450 . . . . . . . . . . . . . . . . . . . . . . . 25
DM-365XA . . . . . . . . . . . . . . . . . . . . 20 HGS-100A . . . . . . . . . . . . . . . . . . . . 25
Website XRP-3000 . . . . . . . . . . . . . . . . . . . . . 18 HGS-150A . . . . . . . . . . . . . . . . . . . . 25
www.spectroline.com

30 31
Need Help?
Call Toll-Free:
1-800-274-8888
(Outside the U.S. and Canada: 516-333-4840)
Fax Toll-Free:
1-800-491-6868
(Outside the U.S. and Canada: 516-333-4859)

Website
www.spectroline.com

Proud Members of:

The American Society for New Zealand


Non-Destructive Testing (NDT) Non-Destructive Testing Association

British Institute of Non-Destructive Testing Canadian Institute for NDE


American Society
for Testing & Materials

9/09 A09028
PRINTED IN U.S.A.

You might also like