Professional Documents
Culture Documents
Chemical products
Anti-Spatter 249
Lubricants 253
Tempilsticks 258
247
Adhesive tapes
• 18mm x 50mtr
Pack Quantity: 10
Carton Quantity: 100
MASKING TAPE – 26MM X 50MTR
PN: U70636-B
• 18mm x 20m
• Available in various colours
Pack Quantity: 10
Carton Quantity: 100
PLUMBERS THREAD SEAL TAPE
– 12MM X 10MTRS
• 26mm x 50mtr PN: PLTF
Pack Quantity: 10
Carton Quantity: 100
MASKING TAPE – 48MM X 50MTR
PN: U70648-B
• 48mm x 50mtr
Pack Quantity: 10
• 12mm x 10m
Carton Quantity: 100 • Thread Seal Tape
DUCT TAPE – 48MM X 30MTR • Not suitable for gas equipment
Pack Quantity: 10
PN: SJT60 Carton Quantity: 100
• 48mm x 30mtr
• Sealing and Joining Tape
Pack Quantity: 5
Carton Quantity: 60
248
Anti-spatter
ANTI SPATTER – UNIMIG AEROSOL CALGUARD NOZZLE DIP ANTI SPATTER – WELD KLEEN 350
• Easy to
• 300g containers
Pack Quantity: each
Carton Quantity: 20
SILVER ZINC (Gloss Finish Cold Gal BLUE ZINC (Cold Gal Spray) FLAWCHECK PRECLEANER BEIGE
SECTION NINE – CHEMICAL PRODUCTS
FLAWCHECK KIT
– STEPS 1, 2, 3, 4
PN: FLAWKIT
Complete 4-step kit in a set
• Extra heavy duty industrial hand SEPTONE PROTECTA PINK SEPTONE CITRA SCRUB – with Grit
251
Lube pads
SEPTONE CONICAL SPRAY BOTTLE WELD KLEEN LUBE PADS – RED WELD KLEEN LUBE PADS – BLACK
SECTION NINE – CHEMICAL PRODUCTS
INOX MX8 PTFE GREASE INOX MX8 PTFE GREASE INOX 5L TIN
• 500g tube
• Has the ability to prevent scuffing and
reduce wear under high load and
shock load conditions, together with
its excellent high shear stability and
high temperature operation, makes • Heavy Duty lubricant
INOX-mx8 the preferred choice over • 5L Tin
other extreme pressure greases.
Pack Quantity: each
• INOX-mx8 resists ‘Squeeze out’ from
surfaces requiring lubrication under Carton Quantity: 24
load conditions.
• Has excellent resistance to water
and water wash out even at elevated
temperatures. Effective lubrication is INOX 20L DRUM
maintained and in these situations it PN: INOX20L
also gives protection against rusting
and corrosion.
• Will not thin out because it is shear
resistant or thicken because it resists
oxidation.
• P.T.F.E – Polytetrafluroethylene is a
• 450g tube premium grade anti-friction medium
• Has the ability to prevent scuffing and which gives increased lubrication
reduce wear under high load and and reduces operating temperatures
shock load conditions, together with to bearings, brushes, shafts, gears,
its excellent high shear stability and chains, splines, PTO’s, turntables,
high temperature operation, makes cables, universals, CV and ball joints.
INOX-mx8 the preferred choice over Pack Quantity: each
other extreme pressure greases.
Carton Quantity: 6
• INOX-mx8 resists ‘Squeeze out’ from
surfaces requiring lubrication under
load conditions.
• Has excellent resistance to water
and water wash out even at elevated
temperatures. Effective lubrication is
maintained and in these situations it • Heavy Duty lubricant
also gives protection against rusting • 20L Drum
and corrosion. Pack Quantity: each
• Will not thin out because it is shear Carton Quantity: N/A
resistant or thicken because it resists
oxidation.
• P.T.F.E – Polytetrafluroethylene is a
premium grade anti-friction medium
which gives increased lubrication
and reduces operating temperatures
to bearings, brushes, shafts, gears,
chains, splines, PTO’s, turntables,
cables, universals, CV and ball joints.
Pack Quantity: each
Carton Quantity: 6
253
Lubricants
LANOSEAL LANOLIN SPRAY 400g METAL WORKING COMPOUND NEODROL HPNZ AIR TOOL OIL
SECTION NINE – CHEMICAL PRODUCTS
• 1L
Pack Quantity: each
Carton Quantity: 12
• 450g tin
• A special nickel based anti-seize
compound formulated to protect
against seizure of metal parts
• It is recommended for use with
• 450g Tin stainless steel and other alloys
• For metal working where a copper based anti-seize is
• Used for tapping, threading, sawing, unsuitable.
reaming, broaching, drawing, Pack Quantity: each
pressing, extruding, forging and Carton Quantity: 12
forming
Pack Quantity: each
Carton Quantity: 12
254
Lubricants
• 25g Jar
• Available in a 5L or 20L Bottle • A high performance silicone-based
• A milky white, non-phenolic, general translucent non-toxic paste developed
purpose water miscible cutting fluid for use as a lubricant and protectant
Pack Quantity: each for rubber and metal
• Non conductive
• Water resistant
5L Carton Quantity: 4 • Protects against corrosion
Pack Quantity: 12
Carton Quantity: 60
Pickling paste
S-WELD CLEAN PICKLING PASTE PN: 110/51 (25kg) PICKLING PASTE BRUSH
PN: 110/30 (1kg) PN: PPB
SPRAY N MARK
SECTION NINE – CHEMICAL PRODUCTS
• Spray Cans
• Various colours available
• 350g cans
Pack Quantity: each
Carton Quantity: 12
• A marker that will give a permanent
DY-MARK BALLMARKER INK T400 lightfast mark on steel, timber, tyres etc.
1L • The Dy-Mark Ballmarker features a
PN: 11010105 Yellow unique spring loaded ball valve writing
head with ink feed controlled by a
PN: 11010111 White flexible “squeeze flow” plastic bottle.
PN: 11010101 Black • Hardened tips mean long life and
• Red, green or orange spray cans good economy.
available • Supplied empty, fill with Dy-Mark
• Fast and Convenient Ballmarker ink.
• Fitted with a ‘trigger cap’
Pack Quantity: each
• The double action valve will enable
you to obtain both wide and narrow Carton Quantity: 10
marks as required for your application
• 350g cans
Pack Quantity: each
Carton Quantity: 12
256
Soapstone and chalk
HILIGHT ENGINEERING CHALK BOSS SPLIT CHALK/ SOAPSTONE IRWIN STRAIT LINE CHALK
points calibrated to a guaranteed tolerance of +/- 1%. There are a total of 103
temperature ratings systematically spaced between 38°C/100°F and 2500°C/1371°F.
Most can be certified to be lead free and sulfur free. Every Tempilstik° is traceable
by lot number to the specific batch of raw material from which it is made.
HOW TO USE
When working below 371°C on relatively rough surfaces, where prolonged heating
is not required, the simplest method is to mark the workpiece before heating begins.
The dry opaque Tempilstik° mark will change to a distinct melted mark; this phase
change will occur when the temperature rating of the selected Tempilstik° has been
reached.
Caution: Disregard any colour change during heating process; it is only the
melting of the Tempilstik° mark that indicates the temperature has been reached.
When working on temperatures above 371°C or under prolonged heating, the
Tempilstik° mark may evaporate or be absorbed. Under these conditions, stroke
the workpiece with the selected Tempilstik° from time to time during the heating
TEMPILSTIK° operation. When the rated temperature has been reached, it will leave a liquid smear.
CLEANING
PN: TSC0150 – 150 DEGREES
For temperatures less than 343°C, clean the Tempilstik° off the workpiece by using
PN: TSC0220 – 220 DEGREES alcohol or water, for temperatures over 343°C, clean the Tempilstik° off the workpiece
by using water only.
PN: TSC0250 – 250 DEGREES
PN: TSC0300 – 300 DEGREES
PN: TSC0350 – 350 DEGREES
Many other temperature ratings available
upon request
Pack Quantity: 10
Carton Quantity: 100
Pencils