Professional Documents
Culture Documents
Features Operating Temperature from -55C to +150C 100% Lead-free and RoHS compliant Applications Suitable for both leaded and lead-free reflow / wave soldering
50 A @ 63 V AC/DC
50 A @ 32 V AC/35 V DC
Notes: 1. AC Interrupting Rating tested at rated voltage with unity power factor. DC Interrupting Rating tested at rated voltage with time constant < 0.8 msec. 2. Nominal Resistance measured with < 10% rated current. 3. Nominal Melting It measured at 1 msecs. opening time. 4. Nominal Voltage Drop measured at rated current after temperature has stabilized.
Devices designed to carry rated current for 4 hours minimum. It is recommended that devices be operated continuously at no more than 80% rated current. See Temperature Rerating Curvefor additional rerating information. Devices designed to be mounted with marking code facing up.
2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/437.html for current information.
437 Series
437 Series
140
100
PERCENT OF RATING
120
100
10
80
TIME IN SECONDS
60
TEMPERATURE (C)
0.1
Note: 1. Rerating depicted in this curve is in addition to the standard rerating of 20% for continuous operation. Example: For continuous operation at 75 degrees celsius, the fuse should be rerated as follows: I = (0.80)(0.85)IRAT = (0.68)IRAT
0.01
CURRENT IN AMPERES
Soldering Parameters
Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average Ramp-up Rate (Liquidus Temp (TL) to peak) TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Temperature (tL) Pb free assembly 150C 200C 60 180 seconds 3C/second max. 5C/second max. 217C 60 150 seconds 260+0/-5 C 10 30 seconds 6C/second max. 8 minutes max. 260C
TP TL TS(max) TS(min)
Preheat
7A 8A
tP
Ramp-up Critical Zone TL to TP
Temperature
tL
Ramp-down
tS
time to peak temperature (t 25C to peak)
25
Time
Peak Temperature (TP) Time within 5C of actual peak Temperature (tp) Ramp-down Rate Time 25C to peak Temperature (TP) Do not exceed
Wave Soldering
437 Series
18
2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/437.html for current information.
Product Characteristics
Body: Advanced Ceramic Terminations: A g / Ni / Sn (100% Lead-free) Element Cover Coating: Lead-free Glass Moisture Resistance Thermal Shock Mechanical Shock Vibration Vibration, High Frequency Dissolution of Metallization Terminal Strength MIL -STD-202, Method 106G MIL -STD-202, Method 107G, Condition B MIL -STD-202, Method 213B, Condition A MIL -STD-202, Method 201A MIL -STD-202, Method 204D, Condition D IPC/EIC/JEDEC J-STD-002B, Condition D
Materials
Moisture IPC/JEDEC J-STD-020C, Level 1 Sensitivity Level Solderability Humidity Test Resistance to Solder Heat IPC/EIC/JEDEC J-STD-002B, Condition B MIL-STD-202, Method 103B, Conditions D MIL-STD-202, Method 210F , Condition B
Dimensions
1.000 [0.039] 3.200 0.1778 [0.126 0.007]
Marking Code D E F G H J K L N O P R S T W X
N
2
1.500 [0.059]
0437 008. W R
1.800 [0.071]
3.500 [0.138]
QUantitY cOde
W = 3000 pcs
Packaging
Packaging Option 8mm Tape and Reel
2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/437.html for current information.
Quantity 3000
19
437 Series
IEC 60127-4