Compact adsorption chillers ACS are available in two sizes: ACS 08 and ACS 15 with 8 kW and 15 kW nominal cooling capacity respectively. Key application is cooling and air-conditioning of small to medium sized domestic and commercial buildings and processes. Driving temperatures as low as 55degC are sufficient to generate cold.
Compact adsorption chillers ACS are available in two sizes: ACS 08 and ACS 15 with 8 kW and 15 kW nominal cooling capacity respectively. Key application is cooling and air-conditioning of small to medium sized domestic and commercial buildings and processes. Driving temperatures as low as 55degC are sufficient to generate cold.
Compact adsorption chillers ACS are available in two sizes: ACS 08 and ACS 15 with 8 kW and 15 kW nominal cooling capacity respectively. Key application is cooling and air-conditioning of small to medium sized domestic and commercial buildings and processes. Driving temperatures as low as 55degC are sufficient to generate cold.
SorTech AG Adsorption Chiller ACS 08/ACS 15 Technical data at nominal working point The compact adsorption chillers ACS are available in two sizes: ACS 08 and ACS 15 with 8 kW and 15 kW nominal cooling capacity respectively. Key application is cooling and air-conditioning of small to medium sized domestic and commercial buildings and processes. Solar, district and waste heat as well as cogeneration units are equally suitable for driving the process. By combining several modules larger cooling capacities can be achieved. Driving temperatures as low as 55C are sufficient to generate cold. With silica gel and water (refrigerant) the chillers use particularly environmentally-friendly materials. The ACS is offered in combination with the tailored re- cooler RCS. The optimized subsystem achieves high overall energy efficiency of 10 and beyond. The ACS can alternatively be combined with other re-cooling solutions (wet cooling tower, bore holes, etc.). In the heat pump mode the ACS can also be used for heating applications, enhancing the efficiency of traditional heating systems by up to 50%. Ambient air (in connection with the RCS), solar heat or geothermal energy can serve as low temperature energy sources. Driving energy ist hot water, similar to cooling mode. ACS 08 ACS 15 ACS with heat pump feature Heating capacity: 10 - 25 kW (ACS 08) 20 - 50 kW (ACS 15) COP therm : 1.3 -1.5 Data of ACS 08 verified by measurements at Fraunhofer Institut for Solar Energy Systems. Subject to change without notice Version 08.03.2010 Details on request. Electricity supply Dimensions 18/15 2.0 300 4 1" 27/32 3.7 350 4 1" 72/65 1.6 230 4 3/4" Voltage Frequency Power consumption Length Width Height Weight (empty) Operating weight V Hz W 790 1060 940 265 295 230 ~ 50 7 Heat rejection circuit Driving heat circuit Chilled water circuit Temperature in/out Volume flow Pressure loss Operating pressure max. Connection external thread 18/15 4.0 500 4 5/4" 27/32 7.0 440 4 5/4" C m/h mbar bar 72/65 3.2 260 4 5/4" mm mm mm kg kg 230 ~ 50 14 790 1340 1390 530 590 8 0.60 Cooling capacity, nominal COP therm , nominal kW 15 0.60 ACS 08 ACS 15 Temperature in/out Volume flow Pressure loss Operating pressure max. Connection external thread Temperature in/out Volume flow Pressure loss Operating pressure max. Connection external thread C m/h mbar bar C m/h mbar bar Basic performance data Cooling capacity, max. COP therm , max. Cooling capacity, nominal COP therm , nominal Power consumption ACS 08 Chilled water circuit Heat rejection circuit Driving heat circuit Cooling capacity Operating range 11 kW 0.65 8 kW 0.60 7 W 23 kW 0.65 15 kW 0.60 14 W ACS 15 6-20 C 22-37 C 55-95 C 5-11 kW 6-20 C 22-37 C 55-95 C 10-23 kW SorTech AG SorTech AG Zscherbener Landstr. 17 06126 Halle (Saale) Germany Phone: +49 (0) 345 279809-0 Fax: +49 (0) 345 279809-98 E-mail: office@sortech.de Internet: www.sortech.de EC-fans Water spraying system Integrated control by ACS Re-cooler unit RCS 08/ RCS 15 The SorTech RCS with latest EC-fan technology has been tailored for an energy optimized operation in connection with the adsorption chiller ACS. The re- cooler is equipped with a fresh water spraying system for temporary lowering the re-cooling temperature and increasing significantly the efficiency and cooling power of the chiller during high ambient temperatures. An integrated control concept the RCS is controlled directly and according to demand by the ACS leads to an optimized and coherent subsystem with an easy interface. The subsystem achieves a high cooling performance while optimizing the demand for electrical energy and fresh water. Depending on the conditions, an overall annual system efficiency of 10 and more is feasible (cold production/electrical power consumption). RCS 08 Technical data at nominal working point Subject to change without notice Version 08.03.2010 2x EC- fan 650 Type of fans 21 Re-cooling capacity dB(A) 43 Noise pressure level at 10 m distance Re-cooling medium water Water consumption, max. m/year 4 Pressure loss at nominal volume flow mbar 150 Triggering voltage standard signal (speed control) V 0-10 Electricity supply Hz 230 ~ Hydraulic connection (in/out) mm 35.0 * 1.5 Operating pressure for water connection (spraying system) bar min. 3-6 Power consumption, max. kW 0.65 Length 2000 188 Nominal volume flow m/h 3.7 Width Height Weight (empty) mm kg 1145 950 42 3x EC-fan 650 45 6 7.0 100 42.0 * 1.6 1.2 4125 1145 950 330 mm mm kW Operating weight kg Connection (spraying system) mm 22.0 * 1.0 V 50 RCS 08 RCS 15 225 390