Professional Documents
Culture Documents
RECOMMENDED USES
TECHNICAL DATA
COLOUR, DRY FILM FINISH, DRY FILM VOLUME SOLIDS (ASTM D2697) SPECIFIC GRAVITY THEORETICAL SPREADING RECOMMENDED DFT (DRY FILM) RECOMMENDED WFT (WET FILM) FLASH POINT White & Pastel colours Smooth / Matt 37 2% 1.45 0.05 (for white & pastel shades) 12 10.5 M2/LTR 30 35 Microns/Coat 80 95 Microns/Coat Water Base
DRYING TIME
Drying time @ 30C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.) TOUCH DRY DRY TO RECOAT DRY TO OVER COAT 15 30 minutes 1 2 hours 4 6 hours
www.national-paints.com
ADVANTAGES
NATIONAL PVA PRIMER WHITE FOR MASONRY Excellent adhesion, moderate opacity and sealing property good alkali resistance, suitable for sealing the chalky surfaces like gypsum board or putty.
APPLICATION INSTRUCTION
SURFACE PREPARATION Before application, the surface should be sound, clean and free from oil, grease, loose particles, dust, etc. Application can be done by the recommended application methods.
APPLICATION DATA
APPLICATION METHOD CLEANING/THINNING THINNER (VOLUME) CONV. SPRAY REQUIREMENTS AIRLESS SPRAY REQUIREMENTS NOZZLE SIZE MIXING RATIO (BY VOLUME) POT LIFE @ 30c (100 ml) Roller, Brush, Spray Water 10 15% depending on the method of application Possible Pressure : 2000 2500 psi 0.018 0.021 NA NA
SYSTEM
National PVA Primer White for Masonry RECOMMENDED SYSTEM To be applied on prepared surface. National Stucco Filler National Matt Emulsion OR Other National Recommended System : 1 coat : 2 coats : 2 coats
ADDITIONAL DATA
SHELF LIFE @ 30C 18 months, in original sealed container, with proper storage conditions.
www.national-paints.com
NOTE: We warranty only the quality of our product and this data sheet is based on results obtained from experience and tests. We reserve the right to change data without prior notice. For surface preparation, safety details refer specifier and safety data.
This data sheet supersedes all previous issued. Issued: 0510
www.national-paints.com