You are on page 1of 36

RADCURE COATING RESINS

PRODUCT GUIDE Energy Curable Resins Americas

www.allnex.com

All About Resins

FACTS & FIGURES

About us

imately

Table of Contents

Product Families .............................................................................................................................. 4 Product Index .................................................................................................................................. 5 New Products ................................................................................................................................... 6 UCECOAT Waterborne UV Resins ................................................................................................ 7 EBECRYL LEO Resins ...................................................................................................................... 9 EBECRYL Urethane Acrylates ....................................................................................................... 10 EBECRYL Polyether/Polyester Acrylates & Diluted Polyesters ............................................... 16 EBECRYL Polymer/Diluent Blends ............................................................................................... 19 EBECRYL Epoxy Acrylates ............................................................................................................. 20 Diluting Acrylates .......................................................................................................................... 24 ADDITOL & EBECRYL Additives .................................................................................................. 28 ADDITOL & EBECRYL Photoinitiators .......................................................................................... 29 Product Selection Guide .............................................................................................................. 30 Photoinitiator Selection Guide .................................................................................................... 34 Key to the Tables ............................................................................................................................ 35 Contact Us ................................................................................................................................. Back

Product Families

UCECOAT Waterborne UV Resins

These waterborne resins have low viscosities without the use of diluting acrylates and good physical properties after crosslinking. Several are tack-free after water evaporation. LEO (Low Extractables and Odor) resins are specifically formulated to provide a significant reduction in odor release and potential migration for producing inks and coatings for food and pharmaceutical packaging. Urethane acrylates impart toughness and flexibility. Aliphatic types are non-yellowing and can provide outstanding exterior durability Polyester acrylates are used in a wide range of applications including flexographic and lithographic inks and coatings for paper and wood. Some specialty polyester oligomers provide good adhesion to various substrates. Polymeric resins in monomer can provide adhesion to difficult substrates with low shrinkage and better film formation. Epoxy acrylates are used in formulations requiring superior chemical resistance, hardness and fast cure. Mono, di, tri and higher functional acrylate diluents reduce the viscosity of oligomers and can contribute important physical properties to cured formulations. Several additives are designed to assist with adhesion or enhance the wetting, flow or slip characteristics of coatings. All are co-polymerizable. Photoinitiators absorb UV light and start the polymerization. Product types are hydrogen abstraction, amine synergists and mixtures.

EBECRYL LEO Resins

EBECRYL Urethane Acrylates EBECRYL Polyether/Polyester Acrylates & Diluted Polyesters EBECRYL Polymer/Diluent Blends EBECRYL Epoxy Acrylates Diluting Acrylates EBECRYL Additives ADDITOL & EBECRYL Photoinitiators

Product Index

ADDITOL DX ADDITOL LX EBECRYL 40 EBECRYL 53 EBECRYL 80 EBECRYL 81 EBECRYL 83 EBECRYL 110 EBECRYL 113 EBECRYL 114 EBECRYL 130 EBECRYL 140 EBECRYL 150 EBECRYL 152 EBECRYL 154 EBECRYL 168 EBECRYL 170 EBECRYL 180 EBECRYL 220 EBECRYL 230 EBECRYL 242 EBECRYL 246 EBECRYL 264 EBECRYL 265 EBECRYL 270 EBECRYL 271 EBECRYL 284 EBECRYL 303 EBECRYL 350 EBECRYL 411 EBECRYL 436 EBECRYL 438 EBECRYL 450 EBECRYL 452 EBECRYL 524 EBECRYL 571 EBECRYL 600 EBECRYL 605 EBECRYL 608 EBECRYL 657 EBECRYL 745 EBECRYL 809 EBECRYL 810 EBECRYL 811 EBECRYL 812 EBECRYL 830 EBECRYL 860

29 29 27 27 16 16 16 24 24 24 25 27 25 25 16 28 28 27 15 10 10 6, 10 10 10 10 6, 10 11 19 28 16 16 16 16 17 17 17 20 20 20 17 19 17 17 17 17 18 20

EBECRYL 870 EBECRYL 871 EBECRYL 885 EBECRYL 888 EBECRYL 889 EBECRYL 893 EBECRYL 1258 EBECRYL 1290 EBECRYL 1291 EBECRYL 1300 EBECRYL 1360 EBECRYL 1710 EBECRYL 3200 EBECRYL 3201 EBECRYL 3411 EBECRYL 3415 EBECRYL 3418 EBECRYL 3500 EBECRYL 3600 EBECRYL 3700 EBECRYL 3701 EBECRYL 3701-20T EBECRYL 3702 EBECRYL 3703 EBECRYL 3708 EBECRYL 3720 EBECRYL 3720-HD20 EBECRYL 3720-TM20 EBECRYL 3720-TM40 EBECRYL 3720-TP25 EBECRYL 3720-TP40 EBECRYL 3730-TP20 EBECRYL 4827 EBECRYL 4833 EBECRYL 4849 EBECRYL 4858 EBECRYL 4883 EBECRYL 5129 EBECRYL 7100 EBECRYL 8100 EBECRYL 8110 EBECRYL 8210 EBECRYL 8296 EBECRYL 8301-R EBECRYL 8311 EBECRYL 8402 EBECRYL 8405

18 18 18 18 18 18 11 11 6, 11 19 28 19 20 20 20 21 21 21 21 21 21 21 22 22 22 22 22 22 22 23 23 23 15 11 15 11 11 12 29 4, 10 12 12 12 12 12 13 13

EBECRYL 8411 EBECRYL 8412 EBECRYL 8413 EBECRYL 8414 EBECRYL 8465 EBECRYL 8501 EBECRYL 8602 EBECRYL 8701 EBECRYL 8702 EBECRYL 8800-20R EBECRYL 8804 EBECRYL 8807 EBECRYL 8808 EBECRYL 8810 EBECRYL LEO 10501 EBECRYL LEO 10502 EBECRYL LEO 10551 EBECRYL LEO 10552 EBECRYL LEO 10553 EBECRYL LEO 10601 EBECRYL LEO 10801 EBECRYL P104 EBECRYL P115 EBECRYL P39 UCECOAT 6558 UCECOAT 6569 UCECOAT 7200 UCECOAT 7571 UCECOAT 7655 UCECOAT 7674 UCECOAT 7689 UCECOAT 7699 UCECOAT 7710 UCECOAT 7890 UCECOAT 7891 -CEA DPGDA DPHA HDDA IBOA NPG(PO) 2DA ODA-N PETIA TMPEOTA TMPTA TPGDA

13 13 13 13 13 13 6, 14 14 14 14 14 14 14 6, 14 9 9 9 9 9 9 9 29 29 29 8 8 7 7 7 7 7 7 8 8 8 24 25 26 25 24 25 26 26 26 27 25

ADDITOL additives and photoinitiators EBECRYL energy curable resins UCECOAT waterborne UV resins 5

New Products

NEW PRODUCTS Product


EBECRYL 246

Description
Aliphatic Urethane Diacrylate No intentionally added tin, heavy metals (1), or quinones. Exhibits excellent abrasion resistance, toughness and flexibility, and resistance to yellowing. Aliphatic Urethane Diacrylate No intentionally added tin, heavy metals (1), or quinones. Exhibits good flexibility, adhesion, abrasion resistance, exterior durability, and resistance to yellowing.

Key Features & Performance


Regulation friendly for tin, heavy metals, and quinones Good abrasion resistance Excellent flexibility Exceptional toughness Non-yellowing Regulation friendly for tin, heavy metals, and quinones Good flexibility Good adhesion Non-yellowing Exterior durability Abrasion resistance Regulation friendly for tin, heavy metals, and quinones Excellent abrasion resistance and stain resistance Good flexibility and toughness Good adhesion Non-yellowing Regulation friendly for tin, heavy metals, and quinones Excellent scratch and abrasion resistance High gloss High surface hardness Non-yellowing Excellent UV/EB cure response High flexibility Good chemical resistance High gloss Toughness Excellent adhesion to most types of wood and many plastics Outstanding cleanability with long lasting effect High gloss Excellent surface hardness Excellent chemical resistance Resistant to permanent markers (Sharpie test) Good adhesion Non-yellowing

EBECRYL 271

EBECRYL 1258

Aliphatic Urethane Triacrylate No intentionally added tin, heavy metals (1), or quinones. Combines abrasion resistance, flexibility, and adhesion with resistance to yellowing. Diluted 20% by weight with hydroxypropyl methacrylate Aliphatic Urethane Hexaacrylate No intentionally added tin, heavy metals (1), or quinones. Outstanding hardness, scratch and abrasion resistance, chemical resistance, and are resistance to yellowing. Modified Epoxy Acrylate Demonstrates high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance.

EBECRYL 1291

EBECRYL 3418

EBECRYL 8100

Aliphatic Urethane Tetraacrylate Developed to provide energy cured coatings with an easy to clean surface. Exhibits high contact angles and gloss, easy removal of fingerprints, oils, dust and particulates from the surface of the coating.

EBECRYL 8602

Nine Functional Aliphatic Urethane Acrylate Exhibits significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylates without compromising scratch and abrasion resistance. Does not contain intentionally added organic tin compounds, heavy metals (1) or quinones. Aliphatic Urethane Diacrylate No intentionally added tin, heavy metals (1), or quinones. Excellent abrasion resistance, toughness and flexibility, and resistance to yellowing.

Regulation friendly for tin, heavy metals, and quinones Excellent surface hardness and chemical resistance Excellent weatherability compared to traditional hardcoats High gloss Low haze after abrasion resistance Regulation friendly for tin, heavy metals, and quinones Good abrasion resistance Excellent flexibility Exceptional toughness Non-yellowing cure response

EBECRYL 8810

(1)

As defined by C.O.N.E.Gs Toxic in Packaging Legislation, the ASTM Standard Consumer Safety Specification on Toy Safety F 963 (ASTM F 963-08), or the European Standard on Safety of Toys EN 71 Part 3 : 1994 + A1:2000 + A1/AC:2000 + AC:2002.

UCECOAT Waterborne UV Resins

Waterborne UV Dispersions

Typical Properties (1) Particle size, nm

Viscosity, cP at 25C

Product

Key Features & Performance

UCECOAT 7200

Waterborne Aliphatic Urethane Acrylate High solids (65%) Exceptional hardness, scratch and stain resistance High gloss High reactivity High chemical resistance Robust adhesion on plastic substrates (ABS, PC) Solvent-free Acrylated Polyurethane Dispersion Low viscosity Physically drying before UV cure Excellent adhesion Good stain & chemical resistance Balanced hardness and flexibility Optimized colloidal stability Acrylated Polyurethane Dispersion Low viscosity Physically drying before UV cure Superior hardness and scratch resistance Excellent stain & chemical resistance Excellent reactivity in clear and pigmented coatings Optimized colloidal stability Acrylated Polyurethane Dispersion Low viscosity Outstanding wetting of wood Excellent adhesion & appearance Excellent stain & chemical resistance Optimized colloidal stability Acrylated Polyurethane Dispersion Low viscosity Physically drying before UV cure Excellent exterior durability High flexibility Good chemical resistance Acrylated Polyurethane Dispersion Low viscosity Physically drying before UV cure Very high reactivity in clear and pigmented systems Excellent stability Good compatibility, easy to formulate

White emulsion

464

65

3.7

500

MFFT, C

Description

UCECOAT 7571

Translucent to white liquid

69

35

7.5

58

<0

UCECOAT 7655

Translucent to white liquid

47

35

7.6

64

<0

UCECOAT 7674

Translucent to white liquid

38

39

6.7

97

<0

UCECOAT 7689

Translucent to white liquid

117

35

7.4

42

UCECOAT 7699

Translucent liquid

32

35

7.3

83

(1)

Not a specification

Density, g/ml at 25C 1.10 1.00 1.02 1.05 1.0 1.0

Appearance

Solids Content, %

pH

UCECOAT Waterborne UV Resins

Waterborne UV Dispersions

Typical Properties (1) Particle size, nm

Product

Key Features & Performance

UCECOAT 7710

Waterborne Aliphatic Urethane Acrylate High gloss Excellent mirror effect without polishing Good stain and solvent resistance High hardness & scratch resistance Acrylated Polyurethane Dispersion Specifically developed for UV curable field applied wood and VCT floor coatings Good foam control Excellent wetting of matting agents, pigments, and substrates Floor coatings with uniform matting Physically drying before UV cure Acrylated Polyurethane Dispersion Excellent appearance in matte coatings Superior stability of matte formulations Excellent solvent and chemical resistance Physically drying before UV cure Matte appearance without matting agents

Translucent bluish to white liquid

81

44

6.8

111

MFFT, C

Description

UCECOAT 7890

Translucent to white liquid

11

34

7.1

<150

<0

UCECOAT 7891

Translucent to white liquid

20

31

7.3

<150

<0

Waterborne UV Solutions

Typical Properties (1)

Product

Key Features & Performance

UCECOAT 6558

Aliphatic Urethane Acrylate Solution Moderate viscosity Good adhesion Excellent flexibility Resistance to yellowing Good aspect or appearance Aliphatic Urethane Acrylate Solution High viscosity Light color Good adhesion and transparency Excellent flexibility Resistance to yellowing

Clear to clouded liquid

2990 (25C)

50

Color, Granuler

Description

UCECOAT 6569

Clear liquid

8566 (60C)

95

(1)

Not a specification

Density, g/ml at 25C 1.09 1.10

Viscosity, cP at 25C

Appearance

Solids Content, %

Density, g/ml at 25C 1.10 1.05 1.05

Viscosity, cP at 25C

Appearance

Solids Content, %

pH

EBECRYL LEO Resins

LEO Resins

Typical Properties (1) Epoxy content, % Color, Gardner (Pt-Co) Molecular weight, g/mol 470 750 500 1000 780 500 1500 Functionality

Product

Description
Key Features & Performance

EBECRYL LEO 10501 EBECRYL LEO 10502

Trifunctional Diluting Acrylate High cure response Good flexibility Polymeric Tetrafunctional Acrylate High cure response Low viscosity Good flexibility High gloss Amine Modified Polyether Acrylate Very high cure response Low viscosity Good flexibility High gloss Amine Modified Polyether Acrylate Very high cure response Good flexibility High gloss Amine Modified Polymeric Tetrafunctional Acrylate Partially based on renewable resources Good pigment wetting Good reactivity Excellent printability Modified Epoxy Acrylate Very high cure response Excellent solvent resistance High gloss Good pigment wetting Hexafunctional polyester acrylate High reactivity Very good pigment wetting Very good lithographic behavior in UV offset inks

70 (25C)

0.3

(49)

160 (25C)

1.9

0.4

EBECRYL LEO 10551

2.5

71 (25C)

0.3

EBECRYL LEO 10552

3.5

545 (25C)

0.5

EBECRYL LEO 10553

3.4

213 (25C)

0.3

EBECRYL LEO 10601

200000 (25C) 1774 (60C)

0.4

0.03

0.4

EBECRYL LEO 10801

49684 (25C)

10

dark

(1)

Not a specification

Density, g/ml at 25C 1.10 1.15 1.09 1.12 1.12 1.14 1.08

Viscosity, cP

Acid Value , mg KOH/g

EBECRYL Urethane Acrylates

Aliphatic Urethane Acrylates

Typical Properties (1) Color, Gardner (Pt-Co) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 230

Aliphatic Urethane Diacrylate High molecular weight Soft Very flexible Low Tg Aliphatic Urethane Diacrylate Excellent flexibility Good adhesion to metal Good corrosion resistance Aliphatic Urethane Diacrylate Regulation friendly for tin, heavy metals, and quinones Good abrasion resistance Excellent flexibility Exceptional toughness Aliphatic Urethane Triacrylate Toughness Very good abrasion resistance Good stain resistance Flexible Aliphatic Urethane Triacrylate Toughness Very good abrasion resistance Good stain resistance Flexible Aliphatic Urethane Diacrylate Good flexibility Relatively soft Adhesion Aliphatic Urethane Diacrylate Regulation friendly for tin, heavy metals, and quinones Good flexibility Good adhesion Exterior durability Abrasion resistance

44014 (25C) 3,150 (60C)

(16)

150

83

-55

Tg, C 46 54 42 38 -27 19

Key Features & Performance

Diluting Acrylate

Product

Description

EBECRYL 242

IBOA 30%

21093 (25C) 1850 (60C)

0.2

4045

186

EBECRYL 246

8830000 (25C) 60900 (60C)

0.4

8375

62

EBECRYL 264

HDDA 15%

47384 (25C) 1850 (60C)

0.4

4200

37

EBECRYL 265

TPGDA 25%

36486 (25C) 1530 (60C)

0.3

4500

44

EBECRYL 270

TPGDA <10%

132500 (25C) 3084 (60C)

0.2

1200

87

EBECRYL 271

150000 (25C) 3894 (60C)

(47)

2020

54

(1)

Not a specification

10

Density, g/ml at 25C 1.08 1.10 1.09 1.12 1.13 1.10 1.04

Viscosity, cP

EBECRYL Urethane Acrylates

Aliphatic Urethane Acrylates

Typical Properties (1) Color, Gardner (Pt-Co) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 284

Aliphatic Urethane Diacrylate Excellent exterior durability Tough Flexible Aliphatic Urethane Triacrylate Regulation friendly for tin, heavy metals, and quinones Excellent abrasion resistance and stain resistance Good flexibility and toughness Good adhesion Non-yellowing Aliphatic Urethane Hexaacrylate Good reactivity Excellent hardness Outstanding scratch resistance Aliphatic Urethane Hexaacrylate Regulation friendly for tin, heavy metals, and quinones Excellent scratch and abrasion resistance High gloss High surface hardness Non-yellowing Aliphatic Urethane Diacrylate Good adhesion to various plastics Very tough and flexible Exterior durability Aliphatic Urethane Diacrylate Low intrinsic viscosity Abrasion, chemical and impact resistance Flexibility Toughness Exterior durability Aliphatic Urethane Diacrylate Good flexibility Abrasion resistance Exterior durability Adhesion

HDDA 12%

64250 (25C) 2270 (60C)

0.2

5900

58

Tg, C 50 79 80 47 54 4

Key Features & Performance

Diluting Acrylate

Product

Description

EBECRYL 1258

HPMA 20%

206000 (25C) 7390 (60C)

(15)

4590

41

EBECRYL 1290

85000 (25C) 2040 (60C)

0.2

6700

EBECRYL 1291

101000 (25C) 1910 (60C)

0.2

1070

EBECRYL 4833

N-vinyl-2pyrrolidone 10%

110000 (25C) 2817 (60C)

0.4

7800

120

EBECRYL 4858

7170 (25C)

0.4

5700

3.5

EBECRYL 4883

TPGDA 15%

161000 (25C) 4904 (60C)

0.3

2900

83

(1)

Not a specification

Density, g/ml at 25C 1.18 1.08 1.19 1.16 1.11 1.14 1.10

Viscosity, cP

11

EBECRYL Urethane Acrylates

Aliphatic Urethane Acrylates

Typical Properties (1) Color, Gardner (Pt-Co) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 5129

Aliphatic Urethane Hexaacrylate Fast cure response Scratch and abrasion resistance Improved flexibility Chemical resistance Aliphatic Urethane Tetraacrylate Outstanding cleanability with long lasting effect High gloss Excellent surface hardness Excellent chemical resistance Resistant to permanent markers Aliphatic Urethane Acrylate Easy-to-clean fingerprint without smudge, Outstanding resistance to mechanical wear, Unique long lasting E2C surface effect, Oil and water repellent low surface energy, Resistance to permanent oil markers & inks Aliphatic Urethane Acrylate Dual functionality, reactive with NCO Primary hydroxyl groups Good scratch and abrasion resistance Excellent reactivity Aliphatic Urethane Acrylate for Haptic Coatings Soft, highly flexible coatings Compatible with various polyurethane and acrylic beads, additives and fillers Waxy solid at 25C Aliphatic Urethane Hexaacrylate Good reactivity Excellent hardness Outstanding scratch resistance Exterior durability Aliphatic Urethane Nanocomposite Good compatibility and stability Excellent abrasion resistance Excellent exterior durability Low haze development Good chemical resistance

15780 (25C) 733 (60C)

0.3

9100

Tg, C 30 68 -1

Key Features & Performance

Diluting Acrylate

Product

Description

EBECRYL 8100

TMPTA 25%

784 (25C)

5000

EBECRYL 8110

TMPTA ~22%

1687 (25C)

EBECRYL 8210

3.5

3746 (25C)

0.3

6400

EBECRYL 8296

2474 (60C)

(17)

275

18

EBECRYL 8301-R

24600 (25C) 251 (65.5C)

0.2

7750

EBECRYL 8311

16932 (25C)

0.7

5200

(1)

Not a specification

12

Density, g/ml at 25C 1.18 1.12 1.18 1.16 1.38

Viscosity, cP

EBECRYL Urethane Acrylates

Aliphatic Urethane Acrylates

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 8402

Aliphatic Urethane Diacrylate Relatively low viscosity Good adhesion Outstanding exterior durability Aliphatic Urethane Tetraacrylate Outstanding exterior durability Excellent abrasion resistance Good flexibility Aliphatic Urethane Diacrylate Outstanding extensibility and flexibility Useful in screen inks Good abrasion resistance Good exterior durability Aliphatic Urethane Acrylate Automotive refinish and general metal Excellent surface cure with low intensity UV Excellent adhesion to automotive substrates Good flexibility and toughness Low shrinkage upon cure Aliphatic Urethane Acrylate Designed for thermoformable UV ink applications Excellent flexibility, 550% elongation at break Good milling properties High gloss Off-white opaque appearance Aliphatic Urethane Acrylate Designed for thermoformable UV flexo inks Very flexible, 150% elongation at break Medium viscosity Good ink rheology Good pigment wetting properties Good reactivity Aliphatic Urethane Acrylate Excellent exterior durability Excellent toughness Low color Aliphatic Urethane Acrylate Automotive refinish and general metal Excellent surface cure with low intensity UV Good wetting of inert and reactive fillers Excellent adhesion to automotive substrates Good flexibility and toughness Low shrinkage upon cure

14830 (25C) 507 (60C)

0.2

3350

50

Tg, C 14 30 -18 36

Key Features & Performance

Color, Gardner

Diluting Acrylate

Product

Description

EBECRYL 8405

HDDA 20%

85000 (25C) 4428 (60C)

0.2

4000

29

EBECRYL 8411

IBOA 20%

149500 (25C) 7779 (60C)

0.3

1170

320

EBECRYL 8412

DPGDA 15%

27400 (25C) 1050 (60C)

0.4

3700

18

EBECRYL 8413

IBOA 33%

32544 (60C)

2200

550

EBECRYL 8414

40%

29400 (25C)

0.2

1100

150

EBECRYL 8465

1850 (60C)

0.2

3726

50

EBECRYL 8501

IBOA 15%

36400 (25C) 1400 (60C)

0.8

4200

28

(1)

Not a specification

Density, g/ml at 25C 1.12 1.13 1.13 1.10 1.04 1.10 1.14 1.10

Viscosity, cP

13

EBECRYL Urethane Acrylates

Aliphatic Urethane Acrylates

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 8602

Aliphatic Urethane Acrylate Regulation friendly for tin, heavy metals, and quinones Excellent surface hardness and chemical resistance Excellent weatherability compared to traditional hardcoats High gloss Low haze after abrasion resistance Aliphatic Urethane Triacrylate Excellent abrasion resistance Good adhesion Excellent exterior durability High Tg Good chemical resistance Aliphatic Urethane Hexaacrylate Good toughness Excellent abrasion and stain resistance Impact resistance Non-yellowing Good exterior durability Aliphatic Urethane Acrylate Abrasion resistance Toughness Exterior durability Aliphatic Urethane Diacrylate Extremely tough Flexible Abrasion resistance Aliphatic Urethane Diacrylate Very good surface reactivity Good flexibility Tough Useful for UV LED, UVA and low intensity UV cure Aliphatic Urethane Diacrylate Excellent exterior durability Extremely tough Undiluted for formulating latitude Recommended for screen inks and coatings Aliphatic Urethane Diacrylate Regulation friendly for tin, heavy metals, and quinones Extremely tough Flexible Abrasion resistance

86000 (25C) 3068 (60C)

(32)

5400

Tg, C 75 28 59 24 32 58 54

Key Features & Performance

Color, Gardner (Pt-Co)

Diluting Acrylate

Product

Description

EBECRYL 8701

420000 (25C) 5440 (60C)

0.1

7800

EBECRYL 8702

364000 (25C) 5800 (60C)

0.4

4700

10

EBECRYL 8800-20R

2.5

TPGDA 20% EOEOEA 8%

44588 (25C) 1722 (65.5C) 3200000 (25C) 14649 (65.5C)

0.2

3400

45

EBECRYL 8804

0.4

3000

103

EBECRYL 8807

258600 (25C) 7476 (60C)

0.2

1950

54

EBECRYL 8808

1544000 (25C) 14950 (60C)

0.1

5250

63

EBECRYL 8810

4000000 (25C) 30340 (60C)

0.3

3279

48

(1)

Not a specification

14

Density, g/ml at 25C 1.16 1.13 1.13 1.01 1.14 1.05 1.18 1.16

Viscosity, cP

EBECRYL Urethane Acrylates

Aromatic Urethane Acrylates

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 220

Aromatic Urethane Hexaacrylate High reactivity Outstanding hardness Excellent scratch resistance Chemical resistance Aromatic Urethane Diacrylate Flexibility Impact resistance Adhesion Aromatic Urethane Diacrylate Very good abrasion resistance Toughness Flexibility

28485 (25C) 660 (60C)

0.3

8000

Tg, C 49 -6 29

Key Features & Performance

Color, Gardner

Diluting Acrylate

Product

Description

EBECRYL 4827

238000 (25C) 4241 (60C)

0.2

900

78

EBECRYL 4849

HDDA 15%

74170 (25C) 3435 (60C)

0.6

2700

51

(1)

Not a specification

Density, g/ml at 25C 1.22 1.10 1.14

Viscosity, cP

15

EBECRYL Polyether/Polyester Acrylates & Diluted Polyesters

Polyether/Polyester Acrylates & Diluted Polyesters

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 80

Amine Modified Polyether Tetraacrylate Outstanding reactivity Moderate viscosity High gloss Good chemical resistance Amine Modified Polyether Acrylate Good reactivity Very low viscosity High gloss Amine Modified Polyether Tetraacrylate Very good reactivity Low viscosity High gloss Chemical resistance Functionalized Nanocomposite Acrylate Good compatibility and stability Low viscosity Excellent reactivity Outstanding hardness Low haze development after abrasion Modified Polyester Acrylate Developed for flexographic narrow web and rotary screen applications Excellent adhesion to various unprimed filmic substrates Good cure response Enhanced cold water resistance Diluted Chlorinated Polyester 40% TMPTA Good adhesion Fast UV cure response Good lithographic behavior Diluted Chlorinated Polyester 40% OTA-480 Good adhesion Fast UV cure response Good lithographic behavior Fatty Acid Modified Polyester Hexaacrylate Good pigment wetting Good reactivity Good lithographic behavior

2822 (25C)

(53)

6800

Tg, C 50 -18 6 30 54 37 17

Key Features & Performance

Color, Gardner (Pt-Co)

Product

Description

EBECRYL 81

2.5

92 (25C)

0.5

790

EBECRYL 83

515 (25C)

0.5

2000

13

EBECRYL 154

2177 (25C)

4000

EBECRYL 411

1312 (25C)

6.7

508

54

EBECRYL 436

100000 (25C) 1503 (60C)

1.0

19.4

2300

EBECRYL 438

85600 (25C) 1499 (60C)

1.2

19.4

2800

EBECRYL 450

8278 (25C) 420 (60C)

11.8

4300

(1)

Not a specification

16

Density, g/ml at 25C 1.04 1.08 1.08 1.20 1.11 1.28 1.26 1.12

Viscosity, cP

Acid Value, mg KOH/g

EBECRYL Polyether/Polyester Acrylates & Diluted Polyesters

Polyether/Polyester Acrylates & Diluted Polyesters

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 452

Polyester Tetraacrylate Excellent pigment wetting properties Low viscosity Good cure response Diluted Acidic Polyester 30% HDDA Good adhesion Moderate flexibility Diluted Acidic Polyester Developed for heat shrink sleeve inks Excellent adhesion to shrink PVC, PET-G, SBS and PLA Excellent shrink properties Shrink and contour without discoloration Excellent wrinkle resistance 40% DPGDA Polyester Tetraacrylate Good pigment wetting Excellent lithographic behavior Good anti-misting properties Modified Polyester Acrylate Moderate viscosity Good flexibility Surface hardness Toughness Polyester Tetraacrylate Low viscosity Hardness Chemical resistance Adhesion Lithographic Ink Varnish Wet or dry offset for plastic substrates Very low misting Excellent water balance Polyester Acrylate Pigment grind vehicle for flexo inks Outstanding color development Good adhesion to plastics and papers

769 (25C)

7.0

Tg, C 44 33 54 31 70 72

Key Features & Performance

Color, Gardner (Pt-Co)

Product

Description

EBECRYL 524

61234 (25C) 2000 (60C)

(45)

33.9

1000

30

EBECRYL 571

9232 (25C)

0.4

5.1

1160

20

EBECRYL 657

103500 (25C) 3585 (60C)

12.6

4300

23

EBECRYL 809

3.5

36000 (25C) 1276 (60C)

0.6

7.4

3500

18

EBECRYL 810

453 (25C)

0.5

12.5

6000

EBECRYL 811

90000 (25C) 2003 (60C)

5.0

4000

EBECRYL 812

3.5

9320 (25C) 340 (60C)

1.5

5700

(1)

Not a specification

Density, g/ml at 25C 1.11 1.22 1.14 1.03 1.14 1.09 1.14 1.14

Viscosity, cP

Acid Value, mg KOH/g

17

EBECRYL Polyether/Polyester Acrylates & Diluted Polyesters

Polyether/Polyester Acrylates & Diluted Polyesters

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 830

Polyester Hexaacrylate Hardness Abrasion/scratch resistance Chemical resistance Fatty Acid Modified Polyester Hexaacrylate Rheology suited for lithographic inks Good pigment wetting High reactivity Good solvent resistance Lithographic Ink Varnish Excellent pigment wetting Good water balance Good reactivity Low misting Excellent printability Polyester Triacrylate Excellent abrasion resistance High flexibility Good reactivity Moderate viscosity Polyester Acrylate Excellent adhesion Excellent ink receptivity High flexibility Low viscosity Polyester Tetraacrylate Designed for energy curable publication inks Adhesion to super-calendered paper Lower ink tack & misting High gloss & excellent printability Modified Polyester Acrylate For UV curable field applied floor coatings Resistant to yellowing upon cure and aging Low viscosity Fast cure Adhesion, hardness, and scratch resistance; Good chemical and solvent resistance High gloss

49300 (25C) 990 (65C)

0.3

22.0

11165

Tg, C 60 41 23 21

Key Features & Performance

Color, Gardner

Product

Description

EBECRYL 870

43070 (25C) 2340 (60C)

11.3

4500

EBECRYL 871

47450 (25C)

5.5

7.3

5100

EBECRYL 885

35963 (25C)

0.3

7.6

508

44

EBECRYL 888

3.5

3400 (25C)

EBECRYL 889

32300 (25C)

EBECRYL 893

3.5

580 (25C)

0.4

1422

2.7

(1)

Not a specification

18

Density, g/ml at 25C 1.18 1.08 1.1 1.19 1.19 1.07 1.11

Viscosity, cP

Acid Value, mg KOH/g

EBECRYL Polymer/Diluent Blends

Polymer/Diluent Blends

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 303

Diluted Hydrocarbon Polymer Light color Low viscosity Improved adhesion Good exterior durability Diluted Acrylic Polymer Excellent substrate adhesion Intercoat adhesion Flexibility Diluted Acrylic Polymer Themoformability Tack-free state after cure, non-blocking systems Good temperature resistance Low shrinkage (1.2%) Excellent intercoat adhesion Good adhesion to a variety of untreated plastics Diluted Acrylic Polymer Improved adhesion Film formation Exterior durability

HDDA 45%

577 (25C)

0.2

Tg, C 30 82

Key Features & Performance

Color, Gardner

Diluting Acrylate

Product

Description

EBECRYL 745

HDDA 23% TPGDA 23%

22479 (25C) 1900 (60C) 9858 (25C)

1.5

1900

52

EBECRYL 1300

IBOA 70%

0.1

EBECRYL 1710

HDDA 60%

24480 (25C) 2300 (60C)

0.5

6400

(1)

Not a specification

Density, g/ml at 25C 1.10 1.05 1.03 1.07

Viscosity, cP

19

EBECRYL Epoxy Acrylates

Epoxy Acrylates

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 600

Bisphenol- A Epoxy Diacrylate High reactivity Low color High gloss Excellent solvent resistance Bisphenol- A Epoxy Diacrylate EBECRYL 600 with 25% TPGDA Reduced viscosity Easier handling Bisphenol- A Epoxy Diacrylate EBECRYL 600 with 25% OTA-480 Reduced viscosity Easier handling Epoxidized Soya Oil Tetraacrylate Good flow and leveling Pigment wetting Adhesion Low Viscosity Epoxy Acrylate Handling ease Flexibility Pigment wetting Aliphatic/Aromatic Epoxy Acrylate Low viscosity Flexibility Outstanding wetting and flow Fatty Acid Modified Epoxy Diacrylate Flow and leveling Pigment wetting Low viscosity Flexibility

600000 (25C) 3543 (60C)

0.5

1.1

13900

Tg, C 67 92 83 13 48 8 52

Key Features & Performance

Color, Gardner

Product

Description

EBECRYL 605

7617 (25C) 248 (60C)

0.6

0.9

8300

EBECRYL 608

26043 (25C) 655 (60C)

0.5

0.7

8700

EBECRYL 860

26518 (25C) 990 (60C)

6.5

8.3

1000

20

EBECRYL 3200

1.6

2235 (25C)

1.5

0.3

11900

EBECRYL 3201

1.9

3597 (25C)

2.0

1.7

2300

20

EBECRYL 3411

40100 (25C) 807 (60C)

4.5

1.1

7100

(1)

Not a specification

20

Density, g/ml at 25C 1.17 1.17 1.15 1.03 1.10 1.13 1.13

Viscosity, cP

Acid Value, mg KOH/g

EBECRYL Epoxy Acrylates

Epoxy Acrylates

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 3415

Modified Epoxy Diacrylate Adhesion to plastic substrates Good pigment milling properties Very useful in screen inks 40% HDDA Modified Epoxy Diacrylate Excellent UV/EB cure response High flexibility Good chemical resistance High gloss Toughness Excellent adhesion to most types of wood and many plastics Modified Epoxy Diacrylate Increased toughness Moderate viscosity Chemical resistance High gloss Amine Modified Epoxy Diacrylate Exceptional reactivity Hardness High gloss Chemical resistance Bisphenol- A Epoxy Diacrylate High reactivity Excellent solvent resistance High gloss Modified Bisphenol- A Epoxy Diacrylate Improved flexibility Toughness Increased adhesion High reactivity Modified Bisphenol- A Epoxy Diacrylate EBECRYL 3701 with 20% TMPTA Reduced viscosity Easier handling

1.5

17500 (25C) 1250 (60C)

0.7

1.1

6800

Tg, C 68 35 59 65 52 62

Key Features & Performance

Color, Gardner

Product

Description

EBECRYL 3418

17845 (25C) 540 (60C)

0.8

4067

15

EBECRYL 3500

60000 (25C) 1184 (60C)

2.5

2.5

6500

43

EBECRYL 3600

232000 (25C) 1334 (65.5C)

1.5

0.1

12300

EBECRYL 3700

800000 (25C) 2317 (65.5C)

2.5

0.2

12000

EBECRYL 3701

1600000 (25C) 3996 (65.5C)

3.0

2.7

11400

EBECRYL 3701-20T

89500 (25C) 925 (65.5C)

2.5

2.3

14200

(1)

Not a specification

Density, g/ml at 25C 1.10 1.12 1.18 1.17 1.18 1.19 1.18

Viscosity, cP

Acid Value, mg KOH/g

21

EBECRYL Epoxy Acrylates

Epoxy Acrylates

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 3702

Fatty Acid Modified Epoxy Diacrylate Flow and leveling Pigment wetting Increased flexibility Amine Modified Epoxy Diacrylate Exceptional reactivity Increased flexibility High gloss Improved adhesion Modified Bisphenol- A Epoxy Diacrylate Very good flexibility Impact resistance Good reactivity Bisphenol- A Epoxy Diacrylate Standard epoxy diacrylate Light color High reactivity Solvent resistance High gloss Bisphenol- A Epoxy Diacrylate EBECRYL 3720 with 20% HDDA Reduced viscosity Easier handling Bisphenol- A Epoxy Diacrylate EBECRYL 3720 with 20% TMPTA Reduced viscosity Easier handling Bisphenol- A Epoxy Diacrylate EBECRYL 3720 with 40% TMPTA Reduced viscosity Easier handling

495000 (25C) 2249 (65.5C)

4.0

1.1

9500

10

Tg, C 56 57 21 67 91 101 80

Key Features & Performance

Color, Gardner

Product

Description

EBECRYL 3703

320000 (25C) 2117 (65.5C)

2.0

2.5

5900

47

EBECRYL 3708

190000 (25C) 3475 (60C)

1.5

1.7

1094

110

EBECRYL 3720

750000 (25C) 1960 (65.5C)

0.5

0.6

11000

EBECRYL 3720-HD20

8203 (25C) 320 (60C)

0.5

0.7

9900

EBECRYL 3720-TM20

44000 (25C) 759 (60C)

0.5

1.0

9400

EBECRYL 3720-TM40

7085 (25C) 235 (60C)

0.5

0.8

8300

(1)

Not a specification

22

Density, g/ml at 25C 1.14 1.18 1.16 1.17 1.14 1.18 1.15

Viscosity, cP

Acid Value, mg KOH/g

EBECRYL Epoxy Acrylates

Epoxy Acrylates

Typical Properties (1) Tensile Elongation, % Functionality

Tensile Strength, psi

EBECRYL 3720-TP25

Bisphenol- A Epoxy Diacrylate EBECRYL 3720 with 25% TPGDA Reduced viscosity Easier handling Bisphenol- A Epoxy Diacrylate EBECRYL 3720 with 40% TPGDA Reduced viscosity Easier handling Modified Bisphenol- A Epoxy Diacrylate Improved wetting Chemical resistance High gloss 20% TPGDA

10962 (25C) 315 (60C)

0.5

0.7

9800

Tg, C 96 80 99

Key Features & Performance

Color, Gardner

Product

Description

EBECRYL 3720-TP40

2050 (25C) 100 (60C)

0.5

0.6

7400

EBECRYL 3730-TP20

35500 (25C) 686 (60C)

1.2

0.3

9800

(1)

Not a specification

Density, g/ml at 25C 1.14 1.14 1.15

Viscosity, cP

Acid Value, mg KOH/g

23

Diluting Acrylates

Diluting Acrylates

Typical Properties (1)

Color, Pt-Co (Gardner)

Monofunctional

Key Features & Performance

-CEA

average n = 1

-Carboxyethyl Acrylate Predominately acrylic acid dimer Acrylate and carboxylic acid functionality Adhesion promoter for glass, metal, paper Isobornyl Acrylate High purity, low color Flexibility without softening Increased Tg

73

35

0.81

Acid Value, mg KOH/g 365 (0.0) (0.01) 0.2 0.4 0.5

Residual Solvent, %

Viscosity cP at 25C

Product

Description

IBOA

9.5

0.03

ODA-N

Octyl acrylate

Octyl/Decyl Acrylate Excellent diluency Flexibility, low Tg Hydrophobic

2.5

11

0.03

0.018

Decyl acrylate

EBECRYL 110

Oxyethylated Phenol Acrylate Reduced odor Good diluency

22

(0.5)

0.006

n~2

EBECRYL 113

Aliphatic Acrylate Low odor Good pigment wetting Good reactivity Increased flexibility Improved adhesion 2-Phenoxyethyl Acrylate Low viscosity Good diluency Improved adhesion Beneficial in screen inks

120

(0.7)

EBECRYL 114

10

24

(1)

Not a specification

24

Density, g/ml at 25C 1.21 0.97 0.88 1.12 0.97 1.10

Water, %

Diluting Acrylates

Diluting Acrylates

Typical Properties (1)

Color, Pt-Co (Gardner)

Difunctional

Key Features & Performance

DPGDA

Dipropylene Glycol Diacrylate Good diluency Improved flexibility, adhesion Reactivity 1,6-Hexanediol Diacrylate Good weatherability Excellent diluency Adhesion Neopentyl Glycol Propoxylate(2) Diacrylate Increased flexibility Lower surface tension Improved adhesion
n+m~2

9.2

36

0.04

0.13

Acid Value, mg KOH/g 0.2 0.08 0.07 0.11 0.5 2.7

Residual Solvent, %

Viscosity cP at 25C

Product

Description

HDDA

6.3

0.14

0.05

NPG(PO)2DA

15.9

48

0.03

0.003

TPGDA

Tripropylene Glycol Diacrylate Branched alkyl polyether backbone Combines flexibility, moisture resistance, low viscosity and good reactivity without causing brittleness Tricyclodecanediol Diacrylate Good adhesion Low volumetric shrinkage Good hardness Increase barrier properties Bisphenol-A Ethoxylate Diacrylate High reactivity Hardness Chemical resistance
n+m~4

11.8

11

0.16

0.03

EBECRYL 130

171

(0.5)

EBECRYL 150

1347

(0.5)

0.003

EBECRYL 152

Letdown Vehicle for UV Inkjet For piezo inkjet head systems Produces low viscosity inks Low odor Low color High reactivity Good adhesion to treated plastics and coated papers

21

(0.4)

(1)

Not a specification

Density, g/ml at 25C 1.06 1.01 1.007 1.03 1.09 1.14 1.07

Water, %

25

Diluting Acrylates

Diluting Acrylates

Typical Properties (1)

Color, Pt-Co (Gardner)

Tri & Higher Functional

Key Features & Performance

DPHA

Acrylated Dipentaerythritol Increased crosslinking High reactivity Excellent hardness, scratch resistance Chemical resistance Pendant hydroxyl functionality Mixture of penta- and hexaacrylate

17093

(0.8)

0.014

Acid Value, mg KOH/g (0.03) 0.16 6.8 0.1

Residual Solvent, %

Viscosity cP at 25C

Product

Description

OTA-480
O O

Propoxylated Glycerol Triacrylate Good reactivity Crosslinking, hardness, chemical resistance without brittleness Pigment wetting

88

42

0.02

0.010

O O O x

O O

z O y O

x + y + z ~ 3.5

PETIA

Pentaerythritol Tri-Tetraacrylate Tetra- to Tri- acrylate ester ratio ~ 1 to 1 Liquid at normal ambient temperature High reactivity Very good hardness, scratch resistance Pendant hydroxyl functionality Trimethylolpropane Ethoxy Triacrylate Good diluency High UV reactivity Increased flexibility vs. TMPTA

1044

30

0.007

TMPEOTA

70

40

0.16

0.01

x+y+z~3

(1)

Not a specification

26

Density, g/ml at 25C 1.17 10.08 1.18 1.10

Water, %

Diluting Acrylates

Diluting Acrylates

Typical Properties (1) Residual Solvent, % (ppm)

Tri & Higher Functional

Key Features & Performance

TMPTA

Trimethylolpropane Triacrylate Increases crosslinking Imparts hardness Chemical resistance Good reactivity

115

35

0.03

0.01

0.3

EBECRYL 140

Ditrimethyolpropane Tetraacrylate High crosslinking Increased hardness Good chemical resistance Improved abrasion/scratch resistance

979

85

0.008

5.1

EBECRYL 180

Pentaerythritol Tri-Tetraacrylate Tetra- to Tri- acrylate ester ratio ~2 to 1 Crystallizes at normal ambient temperature High reactivity Excellent hardness, scratch resistance Pendant hydroxyl functionality

603

29

0.01

0.002

0.64

EBECRYL 40

Polyether Tetraacrylate Good reactivity Hardness without brittleness Chemical resistance Improved abrasion/scratch resistance Propoxylated Glycerol Triacrylate Purified version of OTA-480 Lower residual odor Reduced residual acrylic acid Reduced residual solvent

148

(0.6)

0.002

1.4

EBECRYL 53

94

43

0.02

(2)

0.2

x + y + z ~ 3.5

(1)

Not a specification

Density, g/ml at 25C 1.10 1.08 1.18 1.15 1.08

Color, Pt-Co (Gardner)

Product

Description Viscosity cP at 25C

Acid Value, mg KOH/g

Water, %

27

ADDITOL & EBECRYL Additives

Additives

Typical Properties (1) Color, Gardner Functionality

Key Features & Performance

Adhesion Promoters

EBECRYL 168

Acidic Methacrylate Excellent adhesion promotion on metal Increased compatibility compared to EBECRYL 170 Acidic Acrylate Excellent adhesion promotion on metal Increased reactivity compared to EBECRYL 168

1466

0.5

282

Acid Value 288 2.4 17.0

Viscosity cP at 25C

Product

Description

EBECRYL 170

3245

Flow, Leveling, Wetting

EBECRYL 350

Silicone Diacrylate COF reduction, increased slip Improved substrate wetting Copolymerizable, non-migratory Silicone Hexaacrylate COF reduction, increased slip Improved substrate wetting Non-migratory Particularly effective in EB

288

7.5

EBECRYL 1360

1327

6.5

(1)

Not a specification

28

Density, g/ml at 25C 1.29 1.33 1.05 1.11

ADDITOL & EBECRYL Photoinitiators

Photoinitiators

Typical Properties (1) Color, Gardner Melting Point, C

Weight per Amine

Key Features & Performance

Amine Synergists

EBECRYL P104

Acrylated Amine Improved stability Reduced odor Decreased moisture sensitivity Copolymerizable Amine Improved stability Reduced odor Decreased moisture sensitivity Acrylated Amine Improved stability Reduced odor Decreased moisture sensitivity Adhesion

10

0.7

300

Acid Value, mg KOH/g 1.8

Viscosity, cP at 25C

Product

Description

EBECRYL P115

22

0.4

223

EBECRYL 7100

1202

0.8

400

Mixtures

ADDITOL DX

Liquid Photoinitiator Effective in colored inks at 5-10% levels Pourable liquid Useful in flexo, litho and screen inks Liquid Photoinitiator Effective in white inks at 5-10% levels Photobleaches Also useful in yellow inks Useful in flexo, litho and screen inks Pourable liquid

64

10

<25

ADDITOL LX

182

<25

Hydrogen Abstraction

EBECRYL P39

Acrylated Benzophenone Derivative UV coatings and inks with very low residual odor Low vapor pressure and volatility Contains 25% EBECRYL LEO 10501

9300

(1)

Not a specification

Density, g/ml at 25C 1.01 0.99 1.10 1.10 1.10 1.19

29

Product Selection Guide

Selection Guide - Resins and Diluting Acrylates The following table provides a comparison of select performance properties for the resin and diluent products. Each product family is assigned a relative ranking for each performance property represented by the numeral just below the column heading. The higher numeral indicates increased performance for that family. The number of bullets in each performance property column represents a relative ranking for that product within its product family. Better performance is indicated by more bullets. To compare the performance of products from different product families, multiply the number of bullets by the numeral. For example, comparing the reactivity of the of the epoxy acrylate EBECRYL 3700 () x 5 = 20) to that of the aliphatic urethane acrylate EBECRYL 1290 ( x 3 = 15) indicates that EBECRYL 3700 has the superior reactivity. Note: For the performance category of viscosity, increased performance equals lower viscosity.

UV/EB Reactivity

Weatherability

Chemical Resistance

Moisture Resistance

Abrasion Resistance

Epoxy Acrylates
EBECRYL 600 EBECRYL 605 EBECRYL 608 EBECRYL 860 EBECRYL 3200 EBECRYL 3201 EBECRYL 3411 EBECRYL 3415 EBECRYL 3418 EBECRYL 3500 EBECRYL 3600 EBECRYL 3700 EBECRYL 3701 EBECRYL 3701-20T EBECRYL 3702 EBECRYL 3703 EBECRYL 3708 EBECRYL 3720 EBECRYL 3720-HD20 EBECRYL 3720-TM20 EBECRYL 3720-TM40 EBECRYL 3720-TP25 EBECRYL 3720-TP40 EBECRYL 3730-TP20

Flexibility

Hardness

Adhesion

Viscosity

Resins

30

Scratch Resistance 3

Product Selection Guide

Weatherability

Chemical Resistance

Moisture Resistance

Abrasion Resistance

Aliphatic Urethane Acrylates


EBECRYL 230 EBECRYL 242 EBECRYL 246 EBECRYL 264 EBECRYL 265 EBECRYL 270 EBECRYL 271 EBECRYL 284 EBECRYL 1258 EBECRYL 1290 EBECRYL 1291 EBECRYL 4833 EBECRYL 4858 EBECRYL 4883 EBECRYL 5129 EBECRYL 8100 EBECRYL 8110 EBECRYL 8210 EBECRYL 8296 EBECRYL 8301-R EBECRYL 8311 EBECRYL 8402 EBECRYL 8405 EBECRYL 8411 EBECRYL 8412 EBECRYL 8413 EBECRYL 8414 EBECRYL 8465 EBECRYL 8501 EBECRYL 8602 EBECRYL 8701 EBECRYL 8702 EBECRYL 8800 EBECRYL 8800-20R EBECRYL 8804 EBECRYL 8807 EBECRYL 8808 EBECRYL 8810

3 3

Viscosity

Resins

2 2

3 3

4 3

5 5

5 2

2 3

4 4

5 5

Aromatic Urethane Acrylates


EBECRYL 220 EBECRYL 4827 EBECRYL 4849

Scratch Resistance 5

UV/EB Reactivity

Flexibility

Hardness

Adhesion

31

Product Selection Guide

UV/EB Reactivity

Weatherability

Chemical Resistance

Moisture Resistance

Abrasion Resistance

Polyether/ Polyester Acrylates & Diluted Polyesters


EBECRYL 80 EBECRYL 81 EBECRYL 83 EBECRYL 154 EBECRYL 411 EBECRYL 436 EBECRYL 438 EBECRYL 450 EBECRYL 452 EBECRYL 524 EBECRYL 571 EBECRYL 657 EBECRYL 809 EBECRYL 810 EBECRYL 811 EBECRYL 812 EBECRYL 830 EBECRYL 870 EBECRYL 871 EBECRYL 885 EBECRYL 888 EBECRYL 889 EBECRYL 893

Flexibility

Hardness

Adhesion

Viscosity

Resins

Acrylic Acrylates
EBECRYL 303 EBECRYL 745 EBECRYL 1300 EBECRYL 1710

32

Scratch Resistance 4

Product Selection Guide

UV/EB Reactivity

Weatherability

Chemical Resistance

Moisture Resistance

Abrasion Resistance

Diluting Acrylates Monofunctional


-CEA IBOA ODA-N EBECRYL 110 EBECRYL 113 EBECRYL 114

Flexibility

Hardness

Adhesion

Viscosity

Diluting Acrylates

Diluting Acrylates Difunctional


DPGDA HDDA NPG(PO) 2DA TPGDA EBECRYL 130 EBECRYL 150 EBECRYL 152

Diluting Acrylates Trifunctional & Higher


DPHA OTA-480 PETIA TMPEOTA TMPTA EBECRYL 140 EBECRYL 180 EBECRYL 40 EBECRYL 53

Scratch Resistance 1

33

Photoinitiator Selection Guide

Pigmented - Plastics/Metal

Clear - Plastics/Metal

Pigmented - Wood

Over Print Varnish

ADDITOL DX

Liquid photoinitiator blend

Non Yellowing

Photoinitiator

Description Clear - Wood

Synergist needed X

Remarks

Inks

Effective in flexo, litho and screen inks, especially darker colored inks X Effective in flexo, litho and screen inks, especially lighter colored inks Inks and coatings requiring low residual odor. Use in place of benzophenone. Improved stability, reduced odor, low viscosity Improved stability, reduced odor, increased reactivity Improved stability, reduced odor, increased adhesion

ADDITOL LX

Liquid photoinitiator blend

EBECRYL P39

Polymeric Photoinitiator

EBECRYL P104 EBECRYL P115

Acrylated amine synergist Copolymerizable amine synergist Acrylated amine synergist

C C

C C

C C

X X

C C

EBECRYL 7100

X = highly recommendedC = used in combination

34

Key to the Tables

Key Word

Description Expressed in mg KOH per gram. For some materials, acid value is reported as weight % acrylic acid. Note: acid value x 0.128 = % acrylic acid acid value x 0.1497 = % methacrylic acid Average values in Gardner, Pt-Co (APHA), or iodine scales. Gardner - range from light yellow to red defined by the chromaticities of glass standards numbered from 1 for the lightest to 18 for the darkest. Pt-Co - defined by specified dilutions of a platinum-cobalt stock solution, ranging from 0 at the light end of the scale to 500 at the darkest. Iodine - ranges from yellow to brown defined by specified dilutions of an iodine solution, ranging from 1 for the lightest color to 500 for the darkest. For colors registering 1 or less on the Iodine scale, the Platinum-Cobalt Units are applicable. Mass per unit of volume at 25C, expressed in grams per milliliter. Average elongation (strain) at break expressed as the percent change in the gauge length, measured on the UV cured homopolymer of the product. Theoretical number of acrylate double bonds per molecule. Minimum film formation temperature. The temperature at which a continuous film is formed after the evaporation of volatile materials from a dispersion or emulsion. The calculated weight based on the theoretical chemical composition. The mean size of the particles in dispersion, reported in microns. The measure of the acidity or alkalinity of an aqueous product. Numerically equal to 7 for neutral, pH increases with alkalinity and decreases with acidity over a range of 0-14. The amount, expressed in percent, of the non-volatile material remaining from a solution or dispersion when heated at a specified time and temperature. Average stress in pounds per square inch at break, measured on the UV cured homopolymer of the product. Glass transition temperature in C of the UV cured homopolymer of the product as measured by dynamic mechanical analysis (DMA). Viscosity in centipoise (cP) or poise (P) measured at 25C and at the sales specification temperature if other than 25C. cP = mPas. Average molecular weight per amine group. Also known as elastic modulus; the force required to elongate a material and calculated from the ratio of stress to strain. It is indicative of the stiffness or rigidity of a material. Measured on the UV cured homopolymer of the product.

Acid Value

Color

Density Elongation Functionality MFFT Molecular weight Particle size pH Solids Tensile Strength Tg Viscosity Weight per Amine Youngs Modulus

All About Resins


Notice: Trademarks indicated with the , or * are registered, unregistered or pending trademarks of Allnex Belgium SA or its directly or indirectly affiliated Allnex Group companies. Disclaimer: Allnex Group companies (Allnex) decline any liability with respect to the use made by anyone of the information contained herein. The information contained herein represents Allnex's best knowledge thereon without constituting any express or implied guarantee or warranty of any kind (including, but not limited to, regarding the accuracy, the completeness or relevance of the data set out herein). Nothing contained herein shall be construed as conferring any license or right under any patent or other intellectual property rights of Allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee or warranty is provided that the product and/or information is adapted for any specific use, performance or result and that product and/or information do not infringe any Allnex and/or third party intellectual property rights. The user should perform its own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the investigation of any possible violation of intellectual property rights of Allnex and/or third parties remains the sole responsibility of the user. 2013 Allnex Group. All Rights Reserved.

35

AFRICA ASIA AUSTRALIA EUROPE NORTH AMERICA SOUTH AMERICA

Allnex Global Operational Headquarters Square Marie Curie 11 1070 Anderlecht Brussels BELGIUM

Allnex Americas Region Headquarters 1950 Lake Park Drive Smyrna, GA 30080 USA

www.allnex.com
RAD-0003-EN-AM-0813

You might also like