Professional Documents
Culture Documents
8A TRIACS
MAIN FEATURES:
Symbol IT(RMS) V DRM/VRRM IGT (Q ) 1 Value 8 600 and 800 5 to 50 Unit A V mA
A1 A2
G
A2
A2
A2 G
A1 A2
A1
DPAK (T8-B)
A2
D2PAK (T8-G)
DESCRIPTION Available either in through-hole or surface-mount packages, the BTA/BTB08 and T8 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control operation in light dimmers, motor speed controllers,... The snubberless versions (BTA/BTB...W and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 2500V RMS) complying with UL standards (File ref.: E81734) ABSOLUTE MAXIMUM RATINGS
Symbol IT(RMS) Parameter RMS on-state current (full sine wave)
A1 A2 G
IPAK (T8-H)
A2
A1 A2 G
A1 A2 G
TO-220AB (BTB08)
Unit A
ITSM
Non repetitive surge peak on-state current (full cycle, Tj initial = 25C) I t Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range
F = 50 Hz F = 60 Hz
tp = 10 ms F = 120 Hz tp = 20 s
As A/s A W C 1/10
STANDARD (4 Quadrants)
Symbol Test Conditions Quadrant BTA/BTB08 C IGT (1) V D = 12 V VGT VGD IH (2) IL dV/dt (2) V D = VDRM RL = 3.3 k Tj = 125C IT = 500 mA IG = 1.2 IGT V D = 67 %VDRM gate open Tj = 125C Tj = 125C I - III - IV II MIN. MIN. RL = 30 I - II - III IV ALL ALL MAX. MAX. MIN. MAX. MAX. 25 40 80 200 5 25 50 1.3 0.2 50 50 100 400 10 V/s V/s B 50 100 mA V V mA mA Unit
STATIC CHARACTERISTICS
Symbol VTM (2) Vto (2) Rd (2) I DRM I RRM
Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1
Test Conditions ITM = 11 A tp = 380 s Tj = 25C Tj = 125C Tj = 125C Tj = 25C Tj = 125C MAX. MAX. MAX. MAX.
Unit V V m A mA
2/10
Unit C/W
C/W
PRODUCT SELECTOR
Voltage (xxx) Part Number 600 V BTA/BTB08-xxxB BTA/BTB108-xxxBW BTA/BTB08-xxxC BTA/BTB08-xxxCW BTA/BTB08-xxxSW BTA/BTB08-xxxTW T810-xxxB T810-xxxH T835-xxxB T835-xxxG T835-xxxH
BTB: non insulated TO-220AB package
Type Standard Snubberless Standard Snubberless Logic level Logic level Logic level Logic level Snubberless Snubberless Snubberless
Package TO-220AB TO-220AB TO-220AB TO-220AB TO-220AB TO-220AB DPAK IPAK DPAK D PAK IPAK
3/10
600
BW
SENSITIVITY & TYPE B: 50mA STANDARD BW: 50mA SNUBBERLESS C: 25mA STANDARD CW: 35mA SNUBBERLESS SW: 10mA LOGIC LEVEL TW: 5mA LOGIC LEVEL
T
TRIAC SERIES CURRENT: 8A
10
600 B
PACKAGE: B: DPAK G: D2PAK H: IPAK
(-TR)
VOLTAGE: 600: 600V 800: 800V SENSITIVITY: 10: 10mA 35: 35mA
PACKING MODE: Blank: Tube -TR: DPAK / D2 PAK Tape & Reel
OTHER INFORMATION
Part Number BTA/BTB08-xxxyz T8yy-xxxB T8yy-xxxB-TR T8yy-xxxH T8yy-xxxG T8yy-xxxG-TR Marking BTA/BTB08xxxyz T8yyxxx T8yyxxx T8yyxxx T8yyxxx T8yyxxx Weight 2.3 g 0.3 g 0.3 g 0.4 g 1.5 g 1.5 g Base quantity 250 75 2500 75 50 1000 Packing mode Bulk Tube Tape & reel Tube Tube Tape & reel
4/10
Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle).
P (W) 10 9 8 7 6 5 4 3 2 1 0
Fig. 2-1: RMS on-state current versus case temperature (full cycle).
IT(RMS) (A) 10 9 8 7 6 5 4 3 2 1 0
BTB/T8
BTA
IT(RMS)(A)
Fig. 2-2: RMS on-state current versus ambient temperature (printed circuit board FR4, copper thickness: 35m),full cycle.
IT(RMS) (A) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 25 Tamb( C) 50 75 100 125
DPAK (S=0.5cm 2 ) D2PAK (S=1cm2 )
K=[Zth/Rth] 1E+0
Zth(j-c) DPAK/IP AK Zth(j-a)
1E-1
TO-220AB/D PAK Zth(j-a)
1E-2
1E-3 1E-3
tp(s)
1E-2 1E-1 1E+0 1E+1 1E+2 5E+2
Fig. 4: values).
ITM (A) 100
On-state
characteristics
(maximum
Tj=Tj max
10
Tj=25C
VTM(V)
1 0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
90 80 70 60 50 40 30 20 10 0
t=20ms
One cycle
5/10
Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms, and corresponding value of I t.
ITSM (A),I t (A s) 1000
Tj initial=25C
Fig. 7: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values).
IGT,IH,IL[Tj] / IGT,IH,IL [Tj=25C] 2.5 2.0
IGT
ITSM
1.5 100
It
IH & IL
1.0 0.5
tp (ms)
10 0.01
0.10
Fig. 8-1: Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values). Snubberless & Logic Level Types
(dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 2.2 2.0 TW 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 (dV/dt)c (V/s) 0.2 0.0 0.1 1.0 10.0
Fig. 8-2: Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values). Standard Types
(dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 2.0 1.8 1.6 1.4
B C
T835/CW/BW
T810/SW
0.4 0.1
1.0
10.0
100.0
Fig. 9: Relative variation of critical rate of decrease of main current versus junction temperature.
Fig. 10: DPAK and D2PAK Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35 m).
Rth(j-a) (C/W) 100 90 80 70 60 50 40 30 20 10 0
DPAK
D PAK
S(cm ) 0 4 8 12 16 20 24 28 32 36 40
50
75
100
125
6/10
2.20 2.40 0.90 1.10 0.03 0.23 0.64 0.90 5.20 5.40 0.45 0.60 0.48 0.60 6.00 6.20 6.40 6.60 4.40 4.60 9.35 10.10 0.80 typ. 0.60 1.00 0.2 typ. 0 8
0.086 0.094 0.035 0.043 0.001 0.009 0.025 0.035 0.204 0.212 0.017 0.023 0.018 0.023 0.236 0.244 0.251 0.259 0.173 0.181 0.368 0.397 0.031 typ. 0.023 0.039 0.007 typ. 0 8
6.7
7/10
REF.
Inches Typ. Max. 0.181 0.106 0.009 0.037 0.055 0.024 0.054 0.368 0.405 0.208 0.624 0.055 0.069 0.016 8 0 8
A A1 A2 B B2 C C2 D E G L L2 L3 R V2
4.30 2.49 0.03 0.70 1.25 0.45 1.21 8.95 10.00 4.88 15.00 1.27 1.40 0
1.40
0.169 0.098 0.001 0.027 0.048 0.60 0.017 1.36 0.047 9.35 0.352 10.28 0.393 5.28 0.192 15.85 0.590 1.40 0.050 1.75 0.055
0.40
10.30 1.30
5.08
3.70 8.90
8/10
Inches Min. 0.086 0.035 0.027 0.025 0.204 0.035 Typ. Max. 0.094 0.043 0.051 0.035 0.212 0.033 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.031 0.039 10
Typ.
H L
L1
B6
B3 B V1 A1
B5 G
C A3
A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 V1
2.2 0.9 0.7 0.64 5.2 0.3 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 10
9/10
REF.
Millimeters Min. Typ. 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.80 16.40 2.65 1.14 1.14 2.60 14.00 10.40 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 16.80 2.95 1.70 1.70 0.511 0.393 0.024 0.048 0.173 0.019 0.094 0.094 0.244 0.147 0.622 0.104 0.044 0.044 Max. Min.
Inches Typ. 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.106 0.259 0.151 0.646 0.661 0.116 0.066 0.066 0.102 Max. 0.625
L F I A
l4
a1
c2
l3 l2 a2
b1 e
M c1
A a1 a2 B b1 b2 C c1 c2 e F I I4 L l2 l3 M
15.20
15.90 0.598
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Swit zerland - United Kingdom http ://www.st.com
10/10