You are on page 1of 5

T.D. Williamson, Inc.

T.D. Williamson, Inc.


P.O. Box 3409
Tulsa, OK 74101-3409
Phone: (918) 447-5000
Fax: (918) 446-6327
The Standard For Operator Training
TM

LineMaster
TDW LineMaster
Training is an API Data
Provider and Approved
Contractor. LineMaster
Training also is a Veriforce
Authorized Evaluator.
T.D. Williamson, Inc., provides the most comprehensive
hot tapping, plugging, pigging, and composite wrap instal-
lation instruction available in compliance with Department
of Transportation covered tasks, standards and requirements.
Rigorous hands-on training and operator qualification
LineMaster

programs are TDWs commitment to the industry.


LineMaster

Training assists you with ensuring your


technicians are trained at the highest level attainable. In our
state-of-the-art facilities and with a pressurized simulated pipe-
line, TDW's LineMaster Training program is an in-depth series
of classes designed to fulfill DOT Pipeline Safety Operator
Qualification rules. To meet DOT requirements, training
programs must include classroom time, written exams and
hands-on performance verifications. TDW's LineMaster
Training exceeds these requirements.
TDW LineMaster Training is the best in the business. The
company youve trusted with your piping maintenance needs for
more than 80 years has the credentials and experience to train
your technicians and operators effectively and efficiently.
2 0 0 8 S C H E D U L E
2008
TM

The Standard For Operator Training


LineMaster
[Hot Tapping Plugging Pigging Composite Wrap]
All classes include instruction for equipment operation and maintenance. See reverse side for full class descriptions.
April:
April 1-2 T-101 Class
April 3-4 660, 760 Class
April 7-10 Mechanics Class
April 14-17 Transmission Class*
April 21-24 Transmission Class*
April 28-May 1 Distribution I Class*
May:
May 6-7 Pigging Technology
May 13-14 HT&P Job Planning
May 19-22 Distribution II Class*

June:
June 2-5 Transmission Class*

August:
Aug. 25-26 T-101 Class
Aug. 27-28 660, 760 Class

September:
Sept. 8-11 Mechanics Class
Sept. 15-18 Transmission Class*
Sept. 22-25 Transmission Class*
October:
Oct. 1-2 Pigging Technology
Oct. 7-8 HT&P Job Planning
Oct. 13-16 Distribution I Class*
Oct. 20-23 Distribution II Class*
Oct. 27-30 Transmission Class*

*One additional day will be required for Operater Qualification Evaluations.
Comprehensive Operator Qualification Training at its Best
Comprehensive Operator Qualification Training at its Best
HANDS-ON IN-DEPTH
and

T.D. Williamson, Inc.


T.D. Williamson, Inc.
P.O. Box 3409
Tulsa, OK 74101-3409
Phone: (918) 447-5000
Fax: (918) 446-6327
The Standard For Operator Training
TM

LineMaster
TDW LineMaster
Training is an API Data
Provider and Approved
Contractor. LineMaster
Training also is a Veriforce
Authorized Evaluator.
T.D. Williamson, Inc., provides the most comprehensive
hot tapping, plugging, pigging, and composite wrap instal-
lation instruction available in compliance with Department
of Transportation covered tasks, standards and requirements.
Rigorous hands-on training and operator qualification
LineMaster

programs are TDWs commitment to the industry.


LineMaster

Training assists you with ensuring your


technicians are trained at the highest level attainable. In our
state-of-the-art facilities and with a pressurized simulated pipe-
line, TDW's LineMaster Training program is an in-depth series
of classes designed to fulfill DOT Pipeline Safety Operator
Qualification rules. To meet DOT requirements, training
programs must include classroom time, written exams and
hands-on performance verifications. TDW's LineMaster
Training exceeds these requirements.
TDW LineMaster Training is the best in the business. The
company youve trusted with your piping maintenance needs for
more than 80 years has the credentials and experience to train
your technicians and operators effectively and efficiently.
2 0 0 8 S C H E D U L E
2008
TM

The Standard For Operator Training


LineMaster
[Hot Tapping Plugging Pigging Composite Wrap]
All classes include instruction for equipment operation and maintenance. See reverse side for full class descriptions.
April:
April 1-2 T-101 Class
April 3-4 660, 760 Class
April 7-10 Mechanics Class
April 14-17 Transmission Class*
April 21-24 Transmission Class*
April 28-May 1 Distribution I Class*
May:
May 6-7 Pigging Technology
May 13-14 HT&P Job Planning
May 19-22 Distribution II Class*

June:
June 2-5 Transmission Class*

August:
Aug. 25-26 T-101 Class
Aug. 27-28 660, 760 Class

September:
Sept. 8-11 Mechanics Class
Sept. 15-18 Transmission Class*
Sept. 22-25 Transmission Class*
October:
Oct. 1-2 Pigging Technology
Oct. 7-8 HT&P Job Planning
Oct. 13-16 Distribution I Class*
Oct. 20-23 Distribution II Class*
Oct. 27-30 Transmission Class*

*One additional day will be required for Operater Qualification Evaluations.
Comprehensive Operator Qualification Training at its Best
Comprehensive Operator Qualification Training at its Best
HANDS-ON IN-DEPTH
and
TDW recommends that engineers, operators, foremen, trainers and hands-on personnel participate in these classes.
LineMaster Training is held in TDWs state-of-the-art Technology Center in Tulsa, OK. A large classroom,
hands-on training area and high-quality audiovisual equipment allow the latest training techniques to be taught easily
and efficiently.
Please wear casual clothes and steel toed shoes. Hard hats, eye protection and ear protection will be provided.
Each participant must cover any other expenses, such as hotel, meals, and transportation to and from Tulsa, etc.
The preferred hotel, Best Western Tulsa Inn & Suites, offers a reduced rate of $72. The hotel can be reached at
918/858-2100 or 1-800-WESTERN and is located at 3212 S. 79th East Ave., Tulsa, OK 74145.
Make reservations as early as possible. To register, please fill out the information on the panel at the top of this page
and fax, call, e-mail or mail to T.D. Williamson, Inc. at 6801 S. 65th W. Ave., Tulsa, OK. 74131.
Note: You may cancel your registration up to 10 business days prior to the training class scheduled
date and TDW will refund your tuition less a $175 service charge.
To register, please fill out the information below and fax, call, e-mail or mail to T.D. Williamson, Inc.
Program:____________________________________________ Date:_________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Company Name: ____________________________________________________________________________________
Address: ___________________________________________________________________________________________
City: _______________________________________________ State:________ Zip Code: _______________________
Telephone: _________________________________________ Fax: __________________________________________
E-mail: _____________________________________________________________________________________________
Payment by card or by check. Check Method of payment:
MasterCard Visa Amx Expiration Date: _____________________ Card no: _____________________________
Signature: _______________________________________________________________________________________
Make checks payable to T.D. Williamson, Inc.
Mail registration and payment to: Customer Training, T.D. Williamson, Inc.,
P. O. Box 3409 Tulsa, OK 74101-3409
You may cancel your registration up to 10 business days prior to the training class
scheduled date and we will refund your tuition less a $175 service charge
C u s t o m e r T r a i n i n g
Registration Form
Fax Number:
USA Toll Free:
Phone:


E-mail:
LineMaster Training
T.D. Williamson, Inc.
6801 S. 65th West Ave.
Tulsa, OK 74131-2444
www.tdwilliamson.com
888-839-6766
918-447-5000
918- 446-6327
linemaster@tdwilliamson.com
Pigging Technology
Distribution Equipment I
Distribution Equipment II
Transmission Equipment
T-101 Tapping Machine
660, 760 Tapping Machines
HT&P Job Planning
Mechanics
Which class are you attending?
Name on card:
Pipeline Pigging Concepts and Applications
This class covers why pigging is necessary and which pigs should be used. In addition, pipeline design for pigging
will be taught, including launcher and receiver design. Pig launching, receiving, tracking and locating will be taught.
Participants also learn about internal pipeline inspection with smart pigs. Observation of pigging processes will be
held on TDWs exclusive test pipeline. An operator qualification test and an observation checklist are used for OQ
requirements. This two-day class begins at 9 a.m. scheduled Tuesdays and ends at 2:30 p.m. on Wednesday. The fee is
$650 for each student. Operator Qualification testing and observations are available for an additional charge of $125.
Hot Tapping & Plugging for Low Pressure Distribution Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered. This class covers T101,
SHORTSTOPP 60, SHORTSTOPP II from sizes 2 inch through 4 inch and 3x4 SHORTSTOPP II. An operator
qualification test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled
Monday and concludes at noon on Thursday. The fee is $950 for each student. Operator Qualification testing and obser-
vations are available for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
Hot Tapping & Plugging for Low Pressure Distribution Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered.
Training is conducted on the T-101 Drilling Machine, T-203 Tapping Machine and 660 Tapping Machine, as well as
SHORTSTOPP 60, SHORTSTOPP II and SHORTSTOPP 500 Plugging Machines. An operator qualification
test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled day and con-
cludes at noon on Thursday. The fee is $950 for each student. Operator Qualification testing and observations are avail-
able for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
Hot Tapping & Plugging for High Pressure Transmission Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered. Equipment training for
T-101 Drilling Machines, 660 Tapping Machines and STOPPLE

Plugging Machines is included. An operator quali-


fication test and an observation checklist are used for OQ requirements. This class that begins at 8 a.m. on scheduled
days and ends at 5:00 p.m. on Thursday. The fee is $1,150 for each student. Operator Qualification testing and observa-
tions are available for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
T-101 Pipeline Drilling Machine
This special two-day class is devoted to the popular T-101 Drilling Machine. Participants will receive in-depth train-
ing on the use and maintenance of this equipment. Operator qualification tests and observations are included. This
class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student.
Operator Qualification testing and observations are available for an additional charge of $125.
This special two-day class is devoted to the popular 660 and 760 Tapping Machines. Participants will receive in-depth
training on the use and maintenance of this equipment. Operator qualification tests and observations are included.
This class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student.
Operator Qualification testing and observations are available for an additional charge of $125.
Note: Students may attend the T-101 class and 660, 760 class for a combined charge of $1150.
Hot Tapping & Plugging Job Planning and Fitting Design
This class is a complete how to for planning a Hot Tapping and Plugging job. Fitting selection, equipment require-
ments, sealing element selection and completion are included. A summary of TDW fitting design principles is
included. This two-day class meets from 8 a.m. to 5 p.m. each day. The fee is $650 for each student.
Mechanic Maintenance Training for Hot Tapping & Plugging Equipment
This class covers preventive maintenance, routine inspection and repairs for TDW Hot Tapping and Plugging
(HT & P) equipment. Classes run from 8 a.m. until 5 p.m. each day. The fee is $950 for each student.
Where Do I Go?
Health & Safety?
All the Facts
Registration
The Standard For Operator Training
Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM Trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM
LineMaster
Pub:10-231-1107
Who Should Attend?
Distribution II Equipment Class
Distribution I Equipment Class
Pigging Technology
Transmission Equipment Class
T-101 Equipment Class
660, 760 Equipment Class
Mechanics Class
LineMaster Training
TM
C l a s s I n f o r m a t i o n
HT & P Job Planning
* Please bring steel toed shoes
TDW recommends that engineers, operators, foremen, trainers and hands-on personnel participate in these classes.
LineMaster Training is held in TDWs state-of-the-art Technology Center in Tulsa, OK. A large classroom,
hands-on training area and high-quality audiovisual equipment allow the latest training techniques to be taught easily
and efficiently.
Please wear casual clothes and steel toed shoes. Hard hats, eye protection and ear protection will be provided.
Each participant must cover any other expenses, such as hotel, meals, and transportation to and from Tulsa, etc.
The preferred hotel, Best Western Tulsa Inn & Suites, offers a reduced rate of $72. The hotel can be reached at
918/858-2100 or 1-800-WESTERN and is located at 3212 S. 79th East Ave., Tulsa, OK 74145.
Make reservations as early as possible. To register, please fill out the information on the panel at the top of this page
and fax, call, e-mail or mail to T.D. Williamson, Inc. at 6801 S. 65th W. Ave., Tulsa, OK. 74131.
Note: You may cancel your registration up to 10 business days prior to the training class scheduled
date and TDW will refund your tuition less a $175 service charge.
To register, please fill out the information below and fax, call, e-mail or mail to T.D. Williamson, Inc.
Program:____________________________________________ Date:_________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Company Name: ____________________________________________________________________________________
Address: ___________________________________________________________________________________________
City: _______________________________________________ State:________ Zip Code: _______________________
Telephone: _________________________________________ Fax: __________________________________________
E-mail: _____________________________________________________________________________________________
Payment by card or by check. Check Method of payment:
MasterCard Visa Amx Expiration Date: _____________________ Card no: _____________________________
Signature: _______________________________________________________________________________________
Make checks payable to T.D. Williamson, Inc.
Mail registration and payment to: Customer Training, T.D. Williamson, Inc.,
P. O. Box 3409 Tulsa, OK 74101-3409
You may cancel your registration up to 10 business days prior to the training class
scheduled date and we will refund your tuition less a $175 service charge
C u s t o m e r T r a i n i n g
Registration Form
Fax Number:
USA Toll Free:
Phone:


E-mail:
LineMaster Training
T.D. Williamson, Inc.
6801 S. 65th West Ave.
Tulsa, OK 74131-2444
www.tdwilliamson.com
888-839-6766
918-447-5000
918- 446-6327
linemaster@tdwilliamson.com
Pigging Technology
Distribution Equipment I
Distribution Equipment II
Transmission Equipment
T-101 Tapping Machine
660, 760 Tapping Machines
HT&P Job Planning
Mechanics
Which class are you attending?
Name on card:
Pipeline Pigging Concepts and Applications
This class covers why pigging is necessary and which pigs should be used. In addition, pipeline design for pigging
will be taught, including launcher and receiver design. Pig launching, receiving, tracking and locating will be taught.
Participants also learn about internal pipeline inspection with smart pigs. Observation of pigging processes will be
held on TDWs exclusive test pipeline. An operator qualification test and an observation checklist are used for OQ
requirements. This two-day class begins at 9 a.m. scheduled Tuesdays and ends at 2:30 p.m. on Wednesday. The fee is
$650 for each student. Operator Qualification testing and observations are available for an additional charge of $125.
Hot Tapping & Plugging for Low Pressure Distribution Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered. This class covers T101,
SHORTSTOPP 60, SHORTSTOPP II from sizes 2 inch through 4 inch and 3x4 SHORTSTOPP II. An operator
qualification test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled
Monday and concludes at noon on Thursday. The fee is $950 for each student. Operator Qualification testing and obser-
vations are available for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
Hot Tapping & Plugging for Low Pressure Distribution Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered.
Training is conducted on the T-101 Drilling Machine, T-203 Tapping Machine and 660 Tapping Machine, as well as
SHORTSTOPP 60, SHORTSTOPP II and SHORTSTOPP 500 Plugging Machines. An operator qualification
test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled day and con-
cludes at noon on Thursday. The fee is $950 for each student. Operator Qualification testing and observations are avail-
able for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
Hot Tapping & Plugging for High Pressure Transmission Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered. Equipment training for
T-101 Drilling Machines, 660 Tapping Machines and STOPPLE

Plugging Machines is included. An operator quali-


fication test and an observation checklist are used for OQ requirements. This class that begins at 8 a.m. on scheduled
days and ends at 5:00 p.m. on Thursday. The fee is $1,150 for each student. Operator Qualification testing and observa-
tions are available for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
T-101 Pipeline Drilling Machine
This special two-day class is devoted to the popular T-101 Drilling Machine. Participants will receive in-depth train-
ing on the use and maintenance of this equipment. Operator qualification tests and observations are included. This
class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student.
Operator Qualification testing and observations are available for an additional charge of $125.
This special two-day class is devoted to the popular 660 and 760 Tapping Machines. Participants will receive in-depth
training on the use and maintenance of this equipment. Operator qualification tests and observations are included.
This class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student.
Operator Qualification testing and observations are available for an additional charge of $125.
Note: Students may attend the T-101 class and 660, 760 class for a combined charge of $1150.
Hot Tapping & Plugging Job Planning and Fitting Design
This class is a complete how to for planning a Hot Tapping and Plugging job. Fitting selection, equipment require-
ments, sealing element selection and completion are included. A summary of TDW fitting design principles is
included. This two-day class meets from 8 a.m. to 5 p.m. each day. The fee is $650 for each student.
Mechanic Maintenance Training for Hot Tapping & Plugging Equipment
This class covers preventive maintenance, routine inspection and repairs for TDW Hot Tapping and Plugging
(HT & P) equipment. Classes run from 8 a.m. until 5 p.m. each day. The fee is $950 for each student.
Where Do I Go?
Health & Safety?
All the Facts
Registration
The Standard For Operator Training
Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM Trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM
LineMaster
Pub:10-231-1107
Who Should Attend?
Distribution II Equipment Class
Distribution I Equipment Class
Pigging Technology
Transmission Equipment Class
T-101 Equipment Class
660, 760 Equipment Class
Mechanics Class
LineMaster Training
TM
C l a s s I n f o r m a t i o n
HT & P Job Planning
* Please bring steel toed shoes
TDW recommends that engineers, operators, foremen, trainers and hands-on personnel participate in these classes.
LineMaster Training is held in TDWs state-of-the-art Technology Center in Tulsa, OK. A large classroom,
hands-on training area and high-quality audiovisual equipment allow the latest training techniques to be taught easily
and efficiently.
Please wear casual clothes and steel toed shoes. Hard hats, eye protection and ear protection will be provided.
Each participant must cover any other expenses, such as hotel, meals, and transportation to and from Tulsa, etc.
The preferred hotel, Best Western Tulsa Inn & Suites, offers a reduced rate of $72. The hotel can be reached at
918/858-2100 or 1-800-WESTERN and is located at 3212 S. 79th East Ave., Tulsa, OK 74145.
Make reservations as early as possible. To register, please fill out the information on the panel at the top of this page
and fax, call, e-mail or mail to T.D. Williamson, Inc. at 6801 S. 65th W. Ave., Tulsa, OK. 74131.
Note: You may cancel your registration up to 10 business days prior to the training class scheduled
date and TDW will refund your tuition less a $175 service charge.
To register, please fill out the information below and fax, call, e-mail or mail to T.D. Williamson, Inc.
Program:____________________________________________ Date:_________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Company Name: ____________________________________________________________________________________
Address: ___________________________________________________________________________________________
City: _______________________________________________ State:________ Zip Code: _______________________
Telephone: _________________________________________ Fax: __________________________________________
E-mail: _____________________________________________________________________________________________
Payment by card or by check. Check Method of payment:
MasterCard Visa Amx Expiration Date: _____________________ Card no: _____________________________
Signature: _______________________________________________________________________________________
Make checks payable to T.D. Williamson, Inc.
Mail registration and payment to: Customer Training, T.D. Williamson, Inc.,
P. O. Box 3409 Tulsa, OK 74101-3409
You may cancel your registration up to 10 business days prior to the training class
scheduled date and we will refund your tuition less a $175 service charge
C u s t o m e r T r a i n i n g
Registration Form
Fax Number:
USA Toll Free:
Phone:


E-mail:
LineMaster Training
T.D. Williamson, Inc.
6801 S. 65th West Ave.
Tulsa, OK 74131-2444
www.tdwilliamson.com
888-839-6766
918-447-5000
918- 446-6327
linemaster@tdwilliamson.com
Pigging Technology
Distribution Equipment I
Distribution Equipment II
Transmission Equipment
T-101 Tapping Machine
660, 760 Tapping Machines
HT&P Job Planning
Mechanics
Which class are you attending?
Name on card:
Pipeline Pigging Concepts and Applications
This class covers why pigging is necessary and which pigs should be used. In addition, pipeline design for pigging
will be taught, including launcher and receiver design. Pig launching, receiving, tracking and locating will be taught.
Participants also learn about internal pipeline inspection with smart pigs. Observation of pigging processes will be
held on TDWs exclusive test pipeline. An operator qualification test and an observation checklist are used for OQ
requirements. This two-day class begins at 9 a.m. scheduled Tuesdays and ends at 2:30 p.m. on Wednesday. The fee is
$650 for each student. Operator Qualification testing and observations are available for an additional charge of $125.
Hot Tapping & Plugging for Low Pressure Distribution Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered. This class covers T101,
SHORTSTOPP 60, SHORTSTOPP II from sizes 2 inch through 4 inch and 3x4 SHORTSTOPP II. An operator
qualification test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled
Monday and concludes at noon on Thursday. The fee is $950 for each student. Operator Qualification testing and obser-
vations are available for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
Hot Tapping & Plugging for Low Pressure Distribution Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered.
Training is conducted on the T-101 Drilling Machine, T-203 Tapping Machine and 660 Tapping Machine, as well as
SHORTSTOPP 60, SHORTSTOPP II and SHORTSTOPP 500 Plugging Machines. An operator qualification
test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled day and con-
cludes at noon on Thursday. The fee is $950 for each student. Operator Qualification testing and observations are avail-
able for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
Hot Tapping & Plugging for High Pressure Transmission Pipellines
Hot tapping and plugging operating instructions, applications and maintenance are covered. Equipment training for
T-101 Drilling Machines, 660 Tapping Machines and STOPPLE

Plugging Machines is included. An operator quali-


fication test and an observation checklist are used for OQ requirements. This class that begins at 8 a.m. on scheduled
days and ends at 5:00 p.m. on Thursday. The fee is $1,150 for each student. Operator Qualification testing and observa-
tions are available for an additional charge of $125. Students wanting OQ evaluations will stay one additional day.
T-101 Pipeline Drilling Machine
This special two-day class is devoted to the popular T-101 Drilling Machine. Participants will receive in-depth train-
ing on the use and maintenance of this equipment. Operator qualification tests and observations are included. This
class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student.
Operator Qualification testing and observations are available for an additional charge of $125.
This special two-day class is devoted to the popular 660 and 760 Tapping Machines. Participants will receive in-depth
training on the use and maintenance of this equipment. Operator qualification tests and observations are included.
This class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student.
Operator Qualification testing and observations are available for an additional charge of $125.
Note: Students may attend the T-101 class and 660, 760 class for a combined charge of $1150.
Hot Tapping & Plugging Job Planning and Fitting Design
This class is a complete how to for planning a Hot Tapping and Plugging job. Fitting selection, equipment require-
ments, sealing element selection and completion are included. A summary of TDW fitting design principles is
included. This two-day class meets from 8 a.m. to 5 p.m. each day. The fee is $650 for each student.
Mechanic Maintenance Training for Hot Tapping & Plugging Equipment
This class covers preventive maintenance, routine inspection and repairs for TDW Hot Tapping and Plugging
(HT & P) equipment. Classes run from 8 a.m. until 5 p.m. each day. The fee is $950 for each student.
Where Do I Go?
Health & Safety?
All the Facts
Registration
The Standard For Operator Training
Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM Trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM
LineMaster
Pub:10-231-1107
Who Should Attend?
Distribution II Equipment Class
Distribution I Equipment Class
Pigging Technology
Transmission Equipment Class
T-101 Equipment Class
660, 760 Equipment Class
Mechanics Class
LineMaster Training
TM
C l a s s I n f o r m a t i o n
HT & P Job Planning
* Please bring steel toed shoes

You might also like