Professional Documents
Culture Documents
The Swing gun uses a gun nozzle tip for grabbing stones from the hoppers and exchanging them to the lower gun to be placed onto the transfer sheet. Over time, dirt and oil will make its way into the nozzle assembly and make it stick and lessen the spring reaction when the nozzle tip is pressed in. When this happens Maintenance will need to be done to clean the Gun nozzle to increase the spring reaction to as new condition. Other issues is the hole of the nozzle tip which provides the vacuum to lift a stone will become worn away to a point air will be able to wrap around the smaller SS06 stones and the stones will start to shift on the nozzle tip making collision with other already placed stones and making the stone being placed to flip upside down or on its side. In this situation replacing the Gun nozzle is recommended