Professional Documents
Culture Documents
SET 5
Remote Control
Micro Automation Sets ready-torun combinations from the Siemens automation environment. Quickly implemented automation tasks at a favorable price in the world of micro automation simple, low-cost and pre-tested in working applications.
Smart and wireless SIMATIC S7-200 communicates wirelessly with SMS to send e-mails and telefaxes with a GSM modem. For any application whether wirelessly networking to plant sub-stations, or sending messages to request service calls SMS messages can even have embedded PLC values to meet the requirements. This allows the cellular phone to gather remote service and simple diagnostic messages.
Ready to be powered-up standard micro-automation components can be quickly commissioned for wireless communications with associated devices, while reducing engineering efforts by use of the freely-distributed Tips&Tricks application examples.
Embark on a new course with Siemens all of the data and the right contact partners for the Set, straightforward ordering or planning with different versions, immediately, directly and simply through www.siemens.com/microset the fastest way to a working solution.
Fax
SMS
1
RS-485
PC/PPI cable
SIMATIC S7-200
TC 35 with antenna
1 SIMATIC S7-200: Centrally controls the machine or plant communicates with the TC 35 GSM modem 2 TC 35 GSM modem: Communicates with the GSM modem of the other stations by sending SMS (Short
Message Service) to the cellular service provider (messages are interpreted as either e-mail or fax and then transferred to the appropriate terminal devices)
Applications Remote service and maintenance, remote diagnostics, remote measurement and control of mobile equipment, vending machine control or plant sub-station control distributed over a wide area Distributed functions in water, gas, oil and power supply systems
Benefits Efficient service agreements can be implemented Materials can be automatically re-ordered by SMS, e-mail or fax Service personnel can be automatically notified using SMS
SIMATIC S7-200 Power supply voltage Integrated I/O Program memory/data memory Program back-up Data back-up Programming language Interfaces 20.4 to 28.8 V DC or 85 or 264 V AC up to 248 DI/DO and 35 AI/AO max. 16 kB/10 kB Maintenance-free in an integrated EPROM EPROM/high-performance capacitor/back-up battery LAD/CSF/STL max 2 x integrated RS 485 communications ports
TC 35 GSM Modem Frequency range RF output Input voltage range Certification Functions Data Dual Band EGSM 900 and GSM 1800 Class 4 (2 W) for EGSM 900, Class 1 (1 W) for GSM 1800 8 V DC to 30 V DC R&TTE Approval; GCF Approval Data, Voice, SMS, Fax CSD to 14.4 bit/s; USSD; non-transparent mode; V 110, V.32
1 2
SIMATIC S7-200 TC 35 GSM kit Modem for rail mounting, antenna with magnetic base, data cable and power supply adapter
Accessories Gender Changer for RS 232 PC/PPI cable PC/PPI cable (to connect the modem with the S7-200) Configuring software STEP 7 Micro/WIN 32 V3.2 Your contact for the MICRO AUTOMATION SET For further information please contact your local Siemens partner , or local Siemens distributor. If you do not know your Siemens partner please contact the helpline.
Your MICRO AUTOMATION SET in the Internet Contact partners, ordering data, and version information, as well as additional information and examples are provided under:
www.siemens.com/microset
Recommended by