Professional Documents
Culture Documents
Scott Mayeux Executive Technical Director, Pressure Vessel Software Development Intergraph CADWorx & Analysis Solutions January 2011
1/1/2011 1/1/2011
1/1/2011
1/1/2011
1/1/2011
EN13445 2009 Update welded flat heads nozzles tubesheet flanged extensions
1/1/2011 6
1/1/2011
Available for ASME U-tube ASME Fixed ASME Floating For Pressure cases
Old:
New:
L = 5089 mm,
L = 3655 mm,
tre = 7.9 mm
tre = 7.3 mm
Useful for vacuum case. Reduced required thickness, may Eliminate rings.
1/1/2011 13
Very useful for removing the overstress problems in the Thermal cases.
1/1/2011
14
1/1/2011
15
Internationalization
Continued support for world-wide users
Metric Material Database (VIII-1, VIII-2)
1/1/2011
16
Converted from Imperial to user units 20,000 psi = 137.90 MPa v/s 138 MPa
Difference is insignificant
1/1/2011
1/1/2011
Productivity Enhancements
Numerous Productivity Enhancements
Conventional Jacketed vessel
Vapor/Distribution Belts
1/1/2011
19
1/1/2011
Jacket can span multiple Shell courses. Only on cylinders for now.
Vapor/Distribution Belt
1/1/2011
21
No pressure Differential in a vapor/distribution belt so the external pressure on the inner vessel segment is zero
1/1/2011 22
1/1/2011
PV Elite will remember this setting from one model to the next until these settings are altered.
23
1/1/2011
24
Open System folder Optimized Algorithms PTB-3 Div 2 Cone Examples incl.
25
1/1/2011
Thank You!
Questions?
1/1/2011