Professional Documents
Culture Documents
A
: :
College Name :
Page No.
Total
Instructions:
1. Total marks = 60. 2. Each right answer carries 3 marks. 3. Each wrong answer will give -1 mark. 4. Time duration is 20 minutes. 5. Answers to be written in the space given on the right side of options.
Page 1 of 6
1.
Minimum tension reinforcement using HYSD bar required for Slab and Column is A. 0.12% & 0.8% of gross sectional area B. 4% & 4% of gross cross-sectional area C. 0.15% & 6% of gross cross-sectional area D. None of these
2.
A structural element is considered as column, if effective length is ____________ least lateral dimension. A. Greater than three times B. Greater than twelve times C. Less than three time D. Less than twelve times
3.
The following is most associated with anaerobic digestion A. Carbon dioxide B. Methane C. Ammonia D. Methyl isocynate
4.
According the National Ambient Air Quality Standards (NAAQS), the permissible limit (annual average) for SPM in Industrial Areas is A. 40 microgram / cubic meter B. 80 microgram / cubic meter C. 100 microgram / cubic meter D. 120 microgram / cubic meter
5.
The tax levied by central government on selection of bridges and tunnels on National highways is known as
A. Octroi B. Vehicle tax C. Toll D. Passenger tax
Page 2 of 6
6.
7.
8.
9.
The maximum bending moment of a cantilever of span l and carrying a gradually varying load from zero at the free end and w/m at the fixed end is A. wl/2 B. wl/3 C. wl/6 D. wl/8
10.
A. The flow is intermittent B. The flow is turbulent C. The flow is due to water D. The flow is laminar
Page 3 of 6
11.
The plasticity characteristics of clay are due to A. Adsorbed water B. Capillary water C. Free water D. All of above
12.
f/i
13
If fineness modulus of sand is 2.5 it is graded as A. Very coarse sand B. Coarse sand C. Medium sand D. Fine sand E. Very fine sand
14.
The modulus of elasticity of concrete improves with A. Age B. High w/c ratio C. Shorter curing periods D. Better compaction E. All of the above
15.
For A-B-C analysis, Centralised Purchasing and storage , are recommended for A. A-class items B. B-class items C. Very essential items D. Fast moving items
Page 4 of 6
16.
17.
A. 1.15 B. 1.7 C. 1.5 D. 1.3 What is the value of deflection of simply supported beam of length l carrying concentrated load w at the centre? A. B. C. D. None of these
18.
A cantilever beam of length l carrying concentrated load of w at mid span. What is the collapse load? A. w= B. w= C. w= D. none of these
19.
EOQ stands for A. Equivalent Order Quantity B. Essential Order Quality C. Economic Order Quantity D. Essential Operating Quantity
20.
Page 5 of 6
Page 6 of 6