Professional Documents
Culture Documents
SPECIFICATIONS CHART
SG SERIES
Foil strain gages are constructed by embedding a foil measuring element into a carrier. Foil measuring grid Carrier Substrate thickness Cover thickness Connection dimensions in (mm) [in]
KFG SERIES
Constantan foil 5 m thick Polyimide 50 m 25 m Solder pads or ribbon leads (30 long x.05 thick x 3 wide) [1.2 long x .002 thick x .012 wide] Stated in to order box 0.5% Approximately 2.0 1.0% 23C/73F -30 to 250C (-22 to 482F) -30 to 300C (-22 to 572F) 11 ppmC (6.1 ppmF) 23 ppmC (12.8 ppmF) 20 ppmC (11.1 ppmF) -5 to 120C (5 to 248F) 1 ppmC (0.5 ppmF) 3% or 30,000 Negligible > 10,000,000 cycles 3 mm (18 inch)
Constantan foil 6 m thick Kapton 15 m 9 m 27 AWG strand polyvinyl insulation (1 x 2) [.04 x .08]
Nominal resistance Resistance tolerance per package Gage factor (//) (actual value printed on each package) Gage factor tolerance per package Thermal Properties Reference temperature Service temperature: Static measurements Dynamic measurements Temperature characteristics: Steel Aluminum Uncompensated Temperature compensated range Tolerance of temp. compensation Mechanical Properties Maximum strain Hysteresis Fatigue (at 1500 ) Smallest bending radius Transverse sensitivity
120 0.4 ohms 03% 2.10 10% 1.0% 23C/73F -20 to 100C (-4 to 212F) -20 to 100C (-4 to 212F) 10.8 ppmC (6 ppmF) 10 to 80C (50 to 176F) 1 ppmC (0.5 ppmF) 5% or 50,000 Negligible > 10,000,000 cycles 3 mm (18 inch) Stated on each package
E-7
c a
a
b
c
Basic Unit
49
MOST POPULAR MODELS The most popular strain gage models are highlighted. Delivery of these models is normally off-the-shelf.
Encapsulated with Ribbon Leads (Accessory Terminal Pads Are Used to Attach Heavier Gage Wire to Ribbon Leads)
LY11 LY13
STRAIN GAGES
.13.5 5.5 24.0 12.0 1.5 2.0 3.0 3.0 6.0 7.0 7.0 13.5 1.1 1.8 1.5 2.5 4.8 7.5 8.0 8.0 3.5 4.5 4.0 6.0
5 1 2 3 3 4 4 4 5
d b
3.0 12.5 6.0 3.5 14.0 8.0 3.8 12.0 6.0 5.5 24.0 12.0
E-8
MAX DIMENSIONS [MM] PERMITTED ACCESSORY PRICE NOMINAL GRID CARRIER BRIDGE TERMINAL PER RESISENERGIZING PADS PKG TANCE A B C D VOLTAGE PART NO. FIG. () (V RMS) OF 10
$45 45 49 45 62 65 135 69 115 45 45 49 45 62 65 135 69 115 120 350 120 350 120 350 1000 120 1000 120 350 120 350 120 350 1000 120 1000 1.5 2.0 3.0 3.0 6.0 7.0 7.0 10.8 13.5 1.5 2.0 3.0 3.0 6.0 7.0 7.0 10.8 1.1 2.5 1.5 2.5 4.8 7.8 8.0 8.0 3.5 6.0 4.0 6.0 2.5 4 4 8 9 15 20 15 30 3 5 6 8 10 15 20 15 30 TP-1 TP-1 TP-2 TP-2 TP-3 TP-3 TP-3 TP-3 TP-3 TP-1 TP-1 TP-2 TP-2 TP-3 TP-3 TP-3 TP-3 TP-3 1 2 3 3 4 4 4 5 5 1 2 3 3 4 4 4 5
Encapsulated with Solder Pads (Accessory Terminal Pads Are Used for Strain Relief and Connecting Different Wire Gages)
3.0 12.5 6.0 3.5 14.0 8.0 3.8 12.0 6.0 3.2 16.4 6.3 5.5 24.0 12.0 1.1 2.5 1.5 2.5 4.8 7.8 8.0 8.0 3.5 6.0 4.0 6.0
LY41
Temperature characteristics matched to steel
LY43
Temperature characteristics matched to aluminum
d b
3.0 12.5 6.0 3.5 14.0 8.0 3.8 12.0 6.0 3.2 16.4 6.3
a c
SG-7/1000-LY43 SG-10/120-LY43
SG-13/1000-LY43
Terminal Pads for Stress Relief and Junction for Different Gage Wires
page E-25
MAX DIMENSIONS [MM] PERMITTED ACCESSORY PRICE NOMINAL GRID CARRIER BRIDGE TERMINAL PER RESISENERGIZING PADS PKG TANCE A B C D VOLTAGE PART NO. FIG. () (V RMS) OF 5
$105 129 135 120 120 240 24.5 51.5 8.0 41.0 13.0 8.0 68.5 16.0 20 25 35 TP-3 TP-3 TP-3 1 2 4
Solder Pads, Not Encapsulated (Accessory Terminal Pads Are Used for Strain Relief and Connecting Different Gage Wires)
LY40
Temperature characteristics uncompensated
E-9
NOMINAL RESISTANCE ()
120 120 120 120 350 120 350 120 120
B
1.3 0.7 0.9 1.3 1.3 1.4 1.4 3.0 3.3
C
3.3 4.2 5.3 7.4 7.4 9.4 9.4 16.0 37.0
D
2.4 1.4 1.4 2.8 2.8 2.8 2.8 5.2 5.2
c a
1
d b
Actual Size
NOMINAL RESISTANCE ()
120 120 120 120 350 120 350 120 120
B
1.3 0.7 0.9 1.3 1.3 1.4 1.4 3.0 3.3
C
3.3 4.2 5.3 7.4 7.4 9.4 9.4 16.0 37.0
D
2.4 1.4 1.4 2.8 2.8 2.8 2.8 5.2 5.2
Encapsulated with 3 Lead Wires, 9 Feet Long, Attached to Minimize Lead Wire Resistance Effects
STRAIN GAGES
c a d b
E
1 2 3
Actual Size
Ordering Example: KFG-02-120-C1-11L1M2R, package of ten pre-wired strain gages encapsulated with two lead wires attached, $140
E-10
FA
AXIAL STRAIN
C
6.3 8.0 13.0 6.3 8.0 13.0 b
D
5.0 8.0 13.0 5.0 8.0 13.0
MAX PERMITTED ACCESSORY BRIDGE TERMINAL ENERGIZING PADS VOLTAGE PART NO. FIG. (V RMS)
5 8 15 5 8 15 TP-1 TP-2 TP-3 TP-1 TP-2 TP-3 1 1 2 1 1 2
XY11 XY13
SG-2/120-XY41
5 8 15 5 8 15
1 1 2 1 1 2
XY41 XY43
Temperature characteristics matched to aluminum
KFG-1-120-D16-11L1M2S
1.5 2 4 15 8 20
1 2 3 3 4 4
1.5 2 4 8 4 8
1 2 3 4 3 4
E-11
MAX DIMENSIONS [MM] PERMITTED ACCESSORY PRICE NOMINAL GRID CARRIER BRIDGE TERMINAL PER RESISENERGIZING PADS PKG TANCE A B C D VOLTAGE PART NO. FIG. () (V RMS) OF 5
$65 55 69 49 65 55 69 49 1000 1000 1000 350 1000 1000 1000 350 2.1 3.0 7 .0 7 .0 2.1 3.0 7.0 7.0 2.7 3.0 8.0 9.0 9.0 9.0 5 10 15 15 5 10 15 15 a b TP-2 TP-3 TP-3 TP-3 TP-2 TP-3 TP-3 TP-3 1 2 3 3 1 2 3 3
DY11 DY13
3.8 12.0 11.0 3.8 12.0 11.0 2.7 3.0 8.0 9.0 9.0 9.0
SG-2/1000-DY13 SG-3/1000-DY13
$59 49 59 49 59 49 59 49
2.7 3.0
8.0 9.0
9.0 9.0
5 10 15 15 5 10 15 15 a b
1 2 3 3 1 2 3 3
DY41 DY43
3.8 12.0 11.0 3.8 12.0 11.0 2.7 3.0 8.0 9.0 9.0 9.0
SG-2/1000-DY43 SG-3/1000-DY43
STRAIN GAGES
Fv 1 3 L 2 4 b h
E
BENDING STRAIN
E-12
STRAIN GAGES
ROSETTES
To Order (Specify Model Number)
TYPE SERIES MODEL NO. MAX DIMENSIONS [MM] PERMITTED ACCESSORY PRICE NOMINAL GRID CARRIER BRIDGE TERMINAL PER RESISENERGIZING PADS PKG TANCE A B C D VOLTAGE PART NO. FIG. () (V RMS) OF 5
$115 139 139 120 350 120 3.0 3.0 3.0 2.2 6.0 16.0 4 8 4 TP-3 TP-3 TP-3 1 1 1 2.2 16.0 16.0 2.2 16.0 16.0
RY11
Temperature characteristics matched to steel
a
RY13
Temperature characteristics matched to aluminum
SG-3/120-RY31 SG-3/350-RY31 SG-3/120-RY33 $129 139 129
b
120 350 120
4 8 4
1 1 1
RY31
Temperature characteristics matched to steel
RY33
Temperature characteristics matched to aluminum
3.0 3. 0 3.0
4 8 4
1 1 1
RY41
Temperature characteristics matched to steel
RY43
Temperature characteristics matched to aluminum
4 8 4
1 1 1
RY71
Temperature characteristics matched to steel
RY73
Temperature characteristics matched to aluminum
E-13
Rosettes are used to compute the state of stress at a particular point. The results will plot out Mohrs circle, which gives value and orientation of principal strains.
Mohrs Circle
NOMINAL RESISTANCE ()
120 120 120 350 120 350
MAX DIMENSIONS [MM] PERMITTED GRID CARRIER BRIDGE ENERGIZING A B C VOLTAGE FIG. (V RMS)
1.0 2.0 3.0 3.0 5.0 5.0 1.2 1.3 1.3 1.3 1.4 1.4 5.0 8.0 10.0 10.0 11.0 11.0 1.5 2 4 15 8 20 1 2 3 3 4 4
0/45/90 Encapsulated with 2 Lead Wires (3 Feet Long) Attached to Each Element
Temperature characteristics matched to steel
Fig. 1
Fig. 2
Fig. 3
Fig. 4
NOMINAL RESISTANCE ()
120 120 120 350 120 350
MAX DIMENSIONS [MM] PERMITTED GRID CARRIER BRIDGE ENERGIZING A B C VOLTAGE FIG. (V RMS)
1.0 2.0 3.0 3.0 5.0 5.0 1.2 1.3 1.3 1.3 1.4 1.4 5.0 8.0 10.0 10.0 11.0 11.0 1 1.5 2 4 15 8 20 1 2 3 3 4 4
0/45/90 Encapsulated with 3 Lead Wires (9 Feet Long) Attached to Each Element
Temperature characteristics matched to steel
STRAIN GAGES
E
Fig. 1 Fig. 2 Fig. 3 Fig. 4
Ordering Example: KFG-2-120-D17-11L3M3S is a package of ten pre-wired rosette strain gages, encapsulated with three lead wires attached to each element, with temperature characteristics matched to steel, $419.
E-14
B
5.0 5.0 5.0 5.0
C
27.0 27.0 27.0 27.0
D
27.0 27.0 27.0 27.0
FIG.
1 2 1 2
RY91
Ribbon Leads - Temperature compensated to steel
RY21
Solder Pads - Temperature compensated to steel
RY93
Ribbon Leads - Temperature compensated to aluminum
RY23
Solder Pads - Temperature compensated to aluminum
Fig. 1
Fig. 2 (Enlarged)
Terminal Pads for Stress Relief and Junction for Different Gage Wires
B
1.6 1.6 1.6 1.6
C
10.7 10.7 10.7 10.7
D
10.7 10.7 10.7 10.7
FIG.
1 2 1 2
SR11
Ribbon Leads - Temperature compensated to steel
SR41
Solder Pads - Temperature compensated to steel
1 3 3 2
1 3 3
SR13
Ribbon Leads - Temperature compensated to aluminum
SR43
Solder Pads - Temperature compensated to aluminum
For Accessory Terminal Pads, see page E-25.
E-15
B
1.8 1.6 1.8 1.6
C
6.3 7.0 6.3 7.0
D
5.0 6.8 11.0 5.0 6.8 11.0
3.0 12.0
RY51
Temperature characteristics matched to carbon steel
3.0 12.0
RY53
Temperature characteristics matched to aluminum
Fig. 1
Fig. 2
Fig. 3
B
1.8 1.6 1.8 1.6
C
6.3 7.0 6.3 7.0
D
5.0 6.8 11.0 5.0 6.8 11.0
3.0 12.0
RY61
Temperature characteristics matched to carbon steel
3.0 12.0
STRAIN GAGES
RY63
Temperature characteristics matched to aluminum
Ordering Example: SG-7/120-RY61, package of five rosette strain gages encapsulated with solder tabs, with temperature characteristics matched to carbon steel and max. excitation of 9 V, $165.
E
Fig. 1 Fig. 2 Fig. 3
E-16
NOMINAL RESISTANCE () A
C
10.7
D
10.7
FIG.
2
1.6
Enlarged 4 Times
SG-13/200-DG11 SG-20/240-DG11
$165 189
200 240
13.2 20
10 15
TP-2 TP-2
1 2
Full Bridge Diaphragm Strain Gage Encapsulated Diaphragm Gage with Ribbon Leads
Fig. 1 Fig. 2
E-17
OMEGAs transducer-quality strain gages are high quality encapsulated foil strain gages which are available in many configurations. They are commonly used in transducer technology as well as in experimental analysis. The gages come in a variety of lengths, patterns, thermal expansion coefficients (matched to stainless steel, carbon steel, and aluminum), alloy materials and solder configurations. Resistors and resistor wire, used for zero temperature compensation, span temperature compensation, and zero balance, are also available for use with these gages.
SPECIFICATIONS
Foil Thickness: 5 m Carrier Material: Polyimide Carrier Thickness: 50 m Connections: Solder pads (constantan gages); solder dots (karma) Nominal Resistance: 350 and 1000 Resistance Tolerance: 0.5% Gage Factor: 2.0 nominal (actual value printed on package) Gage Factor Tolerance: 1.0% Thermal Properties: Reference Temp.: 23C (73F) Service Temp.: Static: -30 to 250C (-22 to 482F) Dynamic: -30 to 300C (-22 to 572F) Temperature Comp: (zero) Carbon Steel (ferritic): +11 ppm/C
Stainless Steel (austenitic): +17 ppm/C Aluminum: +23 ppm/C Compensated Temp.: -5 to 120C (23 to 248F) Tolerance of Temp Comp.: 1 ppm/C (0.5 ppm/F) Gage Factor Temp Coefficient: Constantan: 0.0090%/C (+0.0050%/F) Karma (SS comp): 0.0103%/C (-0.0057%/F) Mechanical Properties: Maximum Strain: 3% or 30,000 S Hysteresis: Negligible Fatigue (@ 1,500 S): >10,000,000 cycles Smallest Bending Radius: 3 mm (0.12 inch)
c a
a
b
c
STRAIN GAGES
E-18
A
3.3 6.3 13.0 2.0 3.8 7.0 12.5
B
1.5 3.9 5.0 2.5 1.7 3.5 5.0
C
8.2 12 23 7.8 7.0 14.0
D
4.0 7.8 10 6.0 6.0 8.0
23.0 10.0
d b
23.0 10.0
a c
SG-7/350-LY43 SG-13/350-LY43
350 12.5 5.0 23.0 10.0 17 TP-3 For Accessory Terminal Pads, see page E-25. Ordering Example: SG-3/350-LY47K is a package of five uniaxial strain gages with Karma foil and encapsulated solder pads, $89 * SS is a temperature coefficient matched to stainless steel. (LY47) CS is a temperature coefficient matched to carbon steel. (LY41) ALUM is a temperature coefficient matched to aluminum. (LY43)
A
4.7 5.7 4.7 5.7 4.7 5.7 4.7 5.7
B
2.4 3.8 2.4 3.8 2.4 3.8 2.4 3.8
C
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5
D
8.1 8.6 8.1 8.6 8.1 8.6 8.1 8.6
Encapsulated Gages with Four Solder Pads (Accessory Terminal Pads Are Used for Strain Relief and Connecting Different Gage Wires)
a
b
Ordering Example: SG-6/350-TY47 is a package of five torque gages with two Constantan grids, encapsulated with 4 solder pads, $35. * SS is a temperature coefficient matched to stainless steel. (TY47) CS is a temperature coefficient matched to carbon steel. (TY41) ALUM is a temperature coefficient matched to aluminum. (TY43)
d c
Dimensions
4 45
3 45 Z
Torsional Strain
MT
45 2
45 1
E-19
A
3.8 3.8 3.8 3.8
B
3.2 3.2 3.2 3.2
C
9.5 9.5 9.5 9.5
D
6.9 6.9 6.9 6.9
c b d
Dimensions
A
3.0 7.0 3.0 6.8 3.0 7.0 3.0 6.8
B
2.8 3.5 2.8 2.8 2.8 3.5 2.8 2.8
C
8.0 13.0 8.0 13.0 8.0 13.0 8.0 13.0
D
8.0 13.0 8.0 13.0 8.0 13.0 8.0 13.0
STRAIN GAGES
Ordering Example: SG-3/350-XY47K is a package of five biaxial gages with two Karma grids, encapsulated with solder pads, $115. * SS is a temperature coefficient matched to stainless steel. (XY47) CS is a temperature coefficient matched to carbon steel. (XY41) ALUM is a temperature coefficient matched to aluminum. (XY43)
Dimensions
E-20
info@omega.com
www.omega.com
UNITED KINGDOM www. omega.co.uk Manchester, England 0800-488-488 UNITED STATES www.omega.com 1-800-TC-OMEGA Stamford, CT. CANADA www.omega.ca Laval(Quebec) 1-800-TC-OMEGA GERMANY www.omega.de Deckenpfronn, Germany 0800-8266342 FRANCE www.omega.fr Guyancourt, France 088-466-342 CZECH REPUBLIC www.omegaeng.cz Karvin, Czech Republic 596-311-899 BENELUX www.omega.nl Amstelveen, NL 0800-099-33-44
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems, Communication Products and Converters, Data Acquisition and Analysis Software, Data Loggers Plug-in Cards, Signal Conditioners, USB, RS232, RS485 and Parallel Port Data Acquisition Systems, Wireless Transmitters and Receivers
Heaters
Band Heaters, Cartridge Heaters, Circulation Heaters, Comfort Heaters, Controllers, Meters and Switching Devices, Flexible Heaters, General Test and Measurement Instruments, Heater Hook-up Wire, Heating Cable Systems, Immersion Heaters, Process Air and Duct, Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen Instrumentation, Environmental Instrumentation, pH Electrodes and Instruments, Water and Soil Analysis Instrumentation