Professional Documents
Culture Documents
1. Model Description
MODEL SUFFIX
PJ250R
LG
PJ250R-MA
Latin America
2.
Printing Specification 1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3. Stock (Paper) Cover : Coated paper , S/White 150 g/ Inside : Uncoated paper , 60 g/ 4. Printing Method : Off set 5. Bindery : Perfect bind 6. Language : English/Spanish (2) 7. Number of pages : 240
This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. (2) Especially, Dont use or contain lead(Pb) and cadmium(Cd) in ink.
N O T E S
3.
Special Instructions
(1) Origin Notification
* LGESY : China * LGENP : China * LGEIN : Indonesia * LGEDI : Indonesia * LGEVN : Vietnam * LGEEG : Egypt * LGETH : Thailand * LGEMA : Poland * LGEIL : India * LGERA : Russia * LGEAK : Kazakhstan * LGERS : Mexico * LGEAZ : Brazil
4.
9 8 7 6 5 4 3 2 1
REV. NO.
Changes
Mar./10/17
Jang Ji Hyun
S0-81504
MM/DD/YY
SIGNATURE
CHANGE NO.
CHANGE
CONTENTS
Pagination sheet
Front cover
LG(EN)
LG(EN)
Rear cover P/NO.
118
119 LG(SP)
LG(SP)
118
119
OWNERS MANUAL
PLASMA TV
Please read this manual carefully before operating your set and retain it for future reference.
42PJ250R 50PJ250R 42PJ260R 50PJ260R 42PJ350R 50PJ350R 50PK550R 60PK550R
www.lg.com
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
7 2
Clean only with soft dry cloth.
8 3
Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
Unplug this apparatus during lighting storms or when unused for long periods of time.
10 5
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS
1 1 12
Never touch this apparatus or antenna during a thunder or lighting storm. When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. CAUTION concerning the Power Cord: It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
15
WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning.
13
14
16
Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
17
GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply Short-circuit Breaker
18
DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.
19
20
Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places. If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center. Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it.
21
22
23
24
25
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Cable Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 Securing the TV to the wall to prevent falling when the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Favorite Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Favorite Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
USB
Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 DivX Registration Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 78 Preset Picture Settings (Picture Mode) . . . . . . . . . . . . . 80 Manual Picture Adjustment (User Mode) . . . . . . . . . . 81 Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . .82 Energy Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Image Sticking Minimization (ISM) Method . . . . . . 86 Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Initial Setting (Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
TIME SETTING
Clock Setting - Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 External Control Through RS-232C . . . . . . . . . . . . . . . . .1 10
FEATURE OF THIS TV
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as image burn or burn-in. Image burn is not covered under the manufacturers warranty. In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Image burn can also occur on the letterboxed areas of your TV if you use the 4:3 aspect ratio setting for an extended period.
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below.
POW ER ENE RG Y AV SAV ING MO DE INP UT POW ER ENE RG Y AV SAV ING MO DE INP UT
PREPARATION
1 4 7
LI ST
2 5 3 6 9
Q.VIE W
TV
8 0
1 4 7
LI ST
2 5 3 6 9
Q.VIE W
TV
VO
ME NU
L
MU TE
RA TI
FA V O
8 0
CL VO EA IC R E ll
CH
E
A G
VO
ME NU
L
MU TE
Q.
ME
EN
NU
RA TI O
FA V
1.5V 1.5V
TE
CH
E
BA CK
Q.
EX IT
A G
EN TE R
BA CK
ME
NU
FRE EZE
EX
IT
or Owners Manual
M4x28 M5x14
FRE EZE
Remote Control
Power Cord
x4
x3
TV
Polishing Cloth
(Not included with all models.)
Ferrite Core
(Gray) (This feature is available only 42PJ*** models.) Wall Ferrite core can be used to reduce RF noise when connecting the RF cable. The closer the location of the ferrite core to the ANTENNA IN, the better it is.
* Wipe spots on the exterior only with the polishing cloth. * Do not wipe roughly when removing stain. Excessive pressure may cause scratch or discoloration.
Tie Band
The ferrite core can be used to reduce the electromagnetic waves in the PC Audio cable. Wind the PC Audio cable on the ferrite core twice, and Ferrite Core then plug the cables into the TV as shown in the fol(Gray) lowing picture. (This feature is not Place the ferrite core close to AUDIO IN(RGB/DVI) jack available for all on the display. models.)
AUDIO IN (RGB/DVI)
Ferrite Core
(Black) (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic waves that may interfere with the TV. Install the Ferrite core on the power cable close to the wall plug.
Place the ferrite core close to AUDIO IN(RGB/DVI) jack on the display.
PREPARATION
FRONT PANEL INFORMATION
42/50PJ250R, 42/50PJ260R
10
PREPARATION
ENTER
VOL
CH
Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. The LED is off while the TV remains on.
ENTER
VOL
CH
ENTER
POWER Button INPUT Button MENU Button ENTER Button
VOL
VOLUME (-, +) Buttons
CH
CHANNEL (E,D)Buttons
You can operate the button just by touching the button lightly with your finger.
CAUTION
G G
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. Do not drag the TV. The floor or the product may be damaged.
42/50PJ350R
PREPARATION
Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. The LED is off while the TV remains on.
ENTER
VOL
CH
ENTER
POWER Button INPUT Button MENU Button ENTER Button
VOL
VOLUME (-, +) Buttons
CH
CHANNEL (E,D)Buttons
You can operate the button just by touching the button lightly with your finger.
CH
50/60PK550R
Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. The LED is off while the TV remains on.
ENTER
VOL
CH
ENTER
POWER Button INPUT Button MENU Button ENTER Button
VOL
VOLUME (-, +) Buttons
CH
CHANNEL (E,D)Buttons
You can operate the button just by touching the button lightly with your finger.
ENTER
VOL
11
IN1
- AUDIO - (Mono)
VIDEO
AV
IN1
AV
R AUDIO L(MONO) VARIABLE AUDIO OUT VIDEO
VIDEO
R
R AUDIO L(MONO) VARIABLE AUDIO OUT VIDEO
AUDIO
VIDEO
R
AUDIO VIDEO
R
1
PR
PB
R 2
PR
PB
COMPONENT IN
COMPONENT IN
AV IN 2
AV IN 2
R HDMI IN 3
HDMI IN 2
VIDEO
PREPARATION
12
PREPARATION
For 42/50PJ250R
HDMI IN
HDMI/DVI IN
HDMI IN 1
RGB IN(PC)
AUDIO IN (RGB/DVI)
RS-232C IN (CONTROL&SERVICE)
RS-232C IN
(CONTROL&SERVICE)
2 9 2 3 3 4 8 4 5 5 6
ANTENNA IN
ANTENNA IN
SERVICE ONLY
3 7
PREPARATION
HDMI/DVI IN Digital Connection. Supports HD video and Digital audio. Accepts DVI video using an adapter or HDMI to DVI cable (not included) RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). VARIABLE AUDIO OUT Analog audio output for use with amps and home theater systems. COMPONENT IN Analog Connection. Supports SD/HD. Uses a red, green, and blue cable for video & red and white for audio. ANTENNA IN Connect over-the air signals to this jack. Connect cable signals to this jack. USB IN(Except 42/50PJ250R) Used for photo, music and movie. USB IN SERVICE ONLY (For 42/50PJ250R) Used for software updates. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. RGB (PC) (Except 42/50PJ250R) Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable). AUDIO IN (RGB/DVI) (Except 42/50PJ250R) 1/8" (0.32 cm) headphone jack for analog PC audio input.
13
PREPARATION
STAND INSTRUCTION
14
PREPARATION
Stand Body
Assemble the TV as shown and fix the 4 bolts securely using the holes in the back of the TV. x4 M4x28
! NOTE
G
When assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation). If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
Detachment
PREPARATION
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
(60PK550R)
x4 M4x28
x4 M4x30
PROTECTION COVER
After removing the stand, install the included p r o t e c t i o n c o v e r over the hole for the stand. Press the P R O T E C T I O N C O V E R into the TV until you hear it click.
15
PREPARATION
VESA WALL MOUNTING
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer. VESA (A * B) Model
A B
16
PREPARATION
Standard Screw
Quantity
Wall Mounting bracket (sold separately) Wall Mounting bracket (sold separately)
400 * 400
M6
AW-50PG60MS
AW-50PG60M
60PK550R
600 * 400
M8
4 AW-60PG60MS
! NOTE
G
G G
Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount. Standard dimensions for wall mount kits are shown in the table. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer then the standard dimension, as they may cause damage to the inside to the TV. For wall mounts that do not comply with the VESA
standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents. LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions.
CAUTION
Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.
CABLE ARRANGEMENT
Image shown may differ from your TV. After connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables. To connect additional equipment, see EXTERNAL EQUIPMENT SETUP section.
PREPARATION
CABLE HOLDER
17
PREPARATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
4 inches 4 inches 4 inches 4 inches
18
PREPARATION
CAUTION
G G
Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source.
SWIVEL STAND
(This feature is not available for all models.) After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND
PREPARATION
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV.
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. * If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G G
Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
19
PREPARATION
To prevent damage do not connect to the power outlet until all connections are made between the devices.
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance.
2. Cable
ANTENNA IN
20
PREPARATION
RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
Copper Wire Be careful not to bend the copper wire when connecting the antenna.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV.
HD RECEIVER SETUP
Component Connection
1. How to connect
AUDIO IN (RGB/DVI)
VIDEO
2
HDMI IN
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O 1 jacks on the TV.
COMPONENT IN
PB
AV
VIDEO
RGB (PC)
IN1
AUDIO
PR
1
HDMI/DVI IN
ANTEN IN
2
RS-232C IN
(CONTROL&SERVICE)
PB
PR
2. How to use
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box. operation) Select the C o m p o n e n t 1 input source on the TV using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the TV.
Y, CB/PB, CR/PR Resolution 720x480i 720x480p Horizontal Frequency(KHz) 15.73 15.75 31.47 31.50 15.625 31.25 44.96 45.00 37 .50 33.72 33.75 28.125 56.25 67 .432 67 .50 Vertical Frequency(Hz) 59.94 60.00 59.94 60.00 50.00 50.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00
Supported Resolutions Signal 480i 480p 576i 576p 720p 1080i 1080p Component Yes Yes Yes Yes Yes Yes Yes HDMI No Yes No Yes Yes Yes Yes
1920x1080i
1920x1080p
21
HDMI IN
RGB (PC)
IN1
1
HDMI/DVI IN
AUDIO
1 2
Connect the digital set-top box to H D M I I N 1*, H D M I / D V I I N 1*, H D M I I N 2* or H D M I 3* jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video.
1. How to connect
EXTERNAL EQUIPMENT SETUP
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
HDMI Connection
AV
RS-232C IN
(CONTROL&SERVICE)
2. How to use
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select the H D M I 1*, H D M I2* or H D M I 3* input source on the TV using the INPUT button on the remote control.
HDMI OUTPUT
HDMI-DTV Resolution 720x480i Horizontal Frequency(KHz) 15.73 15.75 31.47 31.50 15.625 31.25 44.96 45.00 37 .50 33.72 33.75 28.125 56.25 67 .432 67 .50 27 .00 33.75 Vertical Frequency(Hz) 59.94 60.00 59.94 60.00 50.00 50.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00 24.00 30.00
! NOTE
G
Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. HDMI mode supports PCM audio format only. If the Audio setting is set to Dolby/DTS/Bitstream in some DVDP/STB, make sure to change the setting to PCM.
G G
1920x1080i
1920x1080p
22
Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the TV.
PB
VIDEO
Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV.
VIDEO
AUDIO IN (RGB/DVI)
AV
IN1
2. How to use
1
HDMI IN
RGB (PC)
AUDIO
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select the H D M I 1 input source on the TV using the I N P U T button on the remote control.
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
! NOTE
G
A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary.
DVI-DTV OUTPUT
PR
23
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1* jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red).
1
PB
PR
PB B-Y Cb Pb
PR R-Y Cr Pr
Y Y Y
24
R AUDIO L(MONO)
VIDEO
AV
L
HDMI IN
RGB (PC)
IN1
AUDIO
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
PB
PR
2. How to use
Turn on the DVD player, insert a DVD. Select the C o m p o n e n t 1* input source on the TV using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the TV. Refer to the DVD player's manual for operating instructions.
Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O 1* jacks on the TV.
PR
PB
2
HDMI IN
RGB (PC)
IN1
1
HDMI/DVI IN
AUDIO
V I D E O jacks between TV and Connect the A U D I O/V DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
1. How to connect
R AUDIO L(MONO)
VIDEO
AV
RS-232C IN
(CONTROL&SERVICE)
2. How to use
Turn on the DVD player, insert a DVD. Select the A V 1 or A V 2 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.
VIDEO
AUDIO
HDMI Connection
1. How to connect
VIDEO
VID
(RGB/DVI)
2
HDMI IN
1 2
RGB (PC)
IN1
AUDIO
Connect the HDMI output of the DVD to the H D M I I N 1 *, H D M I / D V I I N 1*, H D M I I N 2* or H D M I 3* jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video.
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
2. How to use
Select the HDMI1*, H D M I2* or HDMI3* input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions.
HDMI OUTPUT
PR
25
PR
1
ANTENNA IN
2
R AUDIO L(
2
HDMI IN
RGB (PC)
IN1
2. How to use
1
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)
Select the A V 1 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source on the TV.
! NOTE
G
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O - L ( M o n o ) jack of the TV.
26
VIDEO
ANT OUT
S-VIDEO
VIDEO
ANT IN
OUTPUT SWITCH
2. How to use
2
Wall Jack
Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)
Antenna
AV
Camcorder
1. How to connect
1
V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red)
VIDEO
AV IN 2
Select the A V 2 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 1* input, select the A V 1* input source on the TV. Operate the corresponding external equipment.
HDMI IN 2
2. How to use
SERVICE ONLY
27
i.e)
2. How to use
AV IN 2
After connecting the U S B I N jack, you use the USB function. (G p .58)
28
HDMI IN
AV
VIDEO
HDMI IN
RGB (PC)
IN1
AUDIO
1. How to connect
1 2
Connect the VGA output of the PC to the R G B I N ( P C ) jack on the TV. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV.
PR
R 1
RS-232C IN
(CONTROL&SERVICE)
2. How to use
Turn on the PC and the TV. Select the R G B - P C input source on the TV using the I N P U T button on the remote control.
RGB OUTPUT
AUDIO
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
AV
L
1. How to connect
IN1
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
2. How to use
Turn on the PC and the TV. Select the HDMI 1 input source on the TV using the I N P U T button on the remote control.
DVI OUTPUT
AUDIO
HDMI IN
RGB (PC)
AUDIO
PR
PB
29
G To get the best picture quality, adjust the PC graphics card to 1024x768(42PJ250R/260R/350R), 13 6 5 x 7 6 8 ( 5 0 P J 2 5 0 R / 2 6 0 R / 3 5 0 R ) , 1920x1080(50/60PK550R). G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
G Avoid keeping a fixed image on the screen for a long period of time. The fixed image could become permanently imprinted on the screen. G The synchronization input form for Horizontal and Vertical frequencies is separate. G Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
30
PICTURE
Brightness Sharpness Color Tint Color Temperature Advanced Control Picture Reset Screen
E
Screen
Move Enter
Move
Prev.
Resolution 50 70 70 0 0
W C
1
MENU
Select P I C T U R E.
2
ENTER
Select S c r e e n.
3ENTER 4
ENTER
Select R e s o l u t i o n.
5 ENTER
31
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.
Brightness Sharpness Color Tint Color Temperature Advanced Control Picture Reset Screen
1 2
MENU
Select P I C T U R E. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB, you can adjust the P o s i t i o n, S i z e or P h a s e.
ENTER
Select S c r e e n.
3
ENTER
Select A u t o c o n f i g ..
4
ENTER
Select Y e s.
5
ENTER
32
PICTURE
Screen
Move Enter
Move
Prev.
Resolution 50 70 70 0 0
W C
PICTURE
Brightness Sharpness Color Tint Color Temperature Advanced Control Picture Reset Screen
E
Move
Enter
Screen
Resolution Auto config. Position
G
Move
Prev.
50 70 70 0 0
W C F
Size
E
Phase Reset
1
MENU
Select P I C T U R E.
2
ENTER
Select S c r e e n.
3
ENTER
Select P o s i t i o n, S i z e, or P h a s e.
4
ENTER
P o s i t i o n: This function is to adjust picture to left/right and up/down as you prefer. S i z e: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. P h a s e : This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
5
ENTER
33
Brightness Sharpness Color Tint Color Temperature Advanced Control Picture Reset Screen
1 2
MENU
Select P I C T U R E.
ENTER
Select S c r e e n.
3
ENTER
Select R e s e t.
4
ENTER
Select Y e s.
5
ENTER
34
Screen
PICTURE
Move Enter
Move
Prev.
50 70 70 0 0
W C
To Set
Yes
No
1. How to connect
VIDEO
DIO IN B/DVI)
AV
L
1 2
PR
AUDIO
ANTENNA IN
2
Set up your speakers through your analog stereo amplifier, according to the instructions provided with the amplifier.
C IN
RVICE)
! NOTE
G
When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (G p . 9 5)
AUDIO
35
POWER
36
ENERGY SAVING Adjusts the Energy Saving. AV MODE Toggles through preset Video and Audio modes. G p.54 INPUT Rotates through inputs. Also switches the TV on from standby. G p.49
ENERGY
AV MODE
INPUT
TV
SAVING
1 4 7
LIST
2 5 8 0
FAV RATIO MUTE
3 6 9
Q.VIEW
Select a Channel. NUMBER button Selects numbered items in a menu. LIST Displays the channel list.
VOL
Q.VIEW Tunes to the last channel viewed.
MENU
CH
P A G E
Q.MENU
FF (Rewind), GG
FREEZE
VOLUME UP /DOWN Adjusts the volume. FAV Scroll through the programmed Favorite channels. G p.52
RATIO Changes the aspect ratio. MUTE Switches the sound on or off. G p.41 CHANNEL UP/DOWN Changes the channel. PAGE UP/DOWN Moves from one full set of screen information to the next one. THUMBSTICK Navigates the on-screen menus and adjusts the system settings to your preference. (Up/Down/Left
Right/ENTER)
MENU Displays the main menu or clears all on-screen displays and returns to TV viewing. X STUDIO Select the Photo/Music/Movie list. Q.MENU Opens the list of Quick Menu options. BACK Allows the user to move return one step in an interactive application or other user interaction function. EXIT Clears all on-screen displays and return to TV viewing from any menu. SIMPLINK Displays channel information at the top of the screen.
Installing Batteries
Open the battery compartment cover on the back side and install the batteries matching correct polarity. Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. Close cover.
37
42/50PJ250R
POWER
38
ENERGY SAVING Adjusts the Energy Saving. AV MODE Toggles through preset Video and Audio modes. G p.54 INPUT Rotates through inputs. Also switches the TV on from standby. G p.49
ENERGY
AV MODE
INPUT
TV
SAVING
1 4 7
LIST
2 5 8 0
FAV RATIO MUTE
3 6 9
Q.VIEW
TV Select the remote operating mode: TV NUMBER button Select a Channel. Selects numbered items in a menu. LIST Displays the channel list. Q.VIEW Tunes to the last channel viewed.
VOL
CH
P A G E
MENU
ENTER
BACK
EXIT
FREEZE
VOLUME UP /DOWN Adjusts the volume. FAV Scroll through the programmed Favorite channels. G p.52 RATIO Changes the aspect ratio.
MUTE Switches the sound on or off. G p.41 CHANNEL UP/DOWN Changes the channel. PAGE UP/DOWN Moves from one full set of screen information to the next one. THUMBSTICK Navigates the on-screen menus and adjusts the system settings to your preference. (Up/Down/Left
Right/ENTER)
MENU Displays the main menu or clears all on-screen displays and returns to TV viewing. CLEAR VOICE ll It helps users listen to human voices better. Q.MENU Opens the list of Quick Menu options. BACK Allows the user to move return one step in an interactive application or other user interaction function. EXIT Clears all on-screen displays and return to TV viewing from any menu. SIMPLINK Displays channel information at the top of the screen.
Installing Batteries
Open the battery compartment cover on the back side and install the batteries matching correct polarity. Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. Close cover.
39
TURNING ON TV
Turning on TV just after installation
1
First, connect the power cord correctly. At this moment, the TV is in standby mode. In standby mode to turn TV on, press the , I N P U T, C H ( or ) button on the TV or press the P O W E R, I N P U T, C H ( or ) , N u m b e r ( 0~9 ) button on the remote control. Select the viewing source by using the I N P U T button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out.
40
! NOTE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
CHANNEL SELECTION
1
Press the C H ( or ) or NUMBER buttons to select a channel number.
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
1 2 3
Press the V O L ( + or - ) button to adjust the volume. If you want to switch the sound off, press the M U T E button. You can cancel the Mute function by pressing the MUTE, V O L ( + or - ) or AV MODE button.
41
42
Step1. Welcome
WELCOME !
Thank you for choosing LG Store Demo
Home Use
Select [Home Use] to use this TV at Home. To use this TV at store, select [Store Demo].
1
ENTER
1 2
ENTER
Select H o m e U s e Mode.
Previous
Next
Previous
Next
1
ENTER
Start A u t o T u n i n g.
1 2
ENTER
Select L a n g u a g e.
For 42/50PJ250R
Move
Enter
PICTURE
Aspect Ratio Energy Saving Picture Mode : 16:9 : On
Move
Enter
AUDIO
Auto Volume Clear Voice ll : Off : Off Level Balance Sound Mode : Standard
Move
Enter
3 0
90 50 60 60 0
R G
50 50
CHANNEL
PICTURE
AUDIO
TIME
OPTION
INPUT
TIME
Clock Off Time On Time Sleep Timer : Off : Off : Off
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
INPUT
TV AV1 AV2 Component 1 Component 2 HDMI1 HDMI2
Move
Enter
1
MENU
2
ENTER
3
ENTER
4
EXIT
Return to TV viewing.
43
CHANNEL
Auto Tuning Manual Tuning Channel Edit
Move
Enter
PICTURE
Aspect Ratio : 16:9 Energy Saving : Off Picture Mode
Move
Enter
AUDIO
Auto Volume Clear Voice ll Balance Sound Mode : Standard : Off : Off Level
Move
Enter
3 0
+ R
44
Treble Bass
E
50 50
CHANNEL
PICTURE
AUDIO
TIME
OPTION
USB
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
USB
Photo List Music List Movie List DivX Reg. Code Deactivation
Move
Enter
1
MENU
2
ENTER
3
ENTER
4
EXIT
Return to TV viewing.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently.
A s p e c t R a t i o: Selects your desired picture format. P i c t u r e M o d e: Selects the factory preset picture depending on the viewing environment. S o u n d M o d e: Selects the factory preset sound for type of program. C a p t i o n: Select on or off. S A P: Selects MTS sound.
S l e e p T i m e r: Select the amount of time before your TV turns off automatically. D e l / A d d / F a v: Select channel you want to add/delete or add the channel to the Favorite List. U S B E j e c t: Select Eject in order to eject a USB device.
Q.Menu
Aspect Ratio Picture Mode Sound Mode Caption SAP Sleep Timer
CH
Except 42/50PJ250R
1
Q.MENU
2 3
EXIT
Return to TV viewing.
45
CHANNEL
Auto Tuning Manual Tuning Channel Edit
Move
Enter
CHANNEL
Auto Tuning Manual Tuning Channel Edit
Move
Enter
46
Check your antenna connection. The previous channel information will be updated during Auto Tuning.
Start Close
1
MENU
Select C H A N N E L.
2
ENTER
Select A u t o T u n i n g.
3
ENTER
Select S t a r t.
4
ENTER
Run A u t o T u n i n g.
5
BACK
The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search. When setting the Auto tuning or Manual tuning, the number of maximum channel you can store is 200. It is subject to change depending on the broadcasting signal environment. Memorizes all the available channels in the order of DTV, TV, CADTV and CATV.
EXIT
Return to TV viewing.
CHANNEL
Auto Tuning Manual Tuning Channel Edit
Move
Enter
CHANNEL
Auto Tuning Manual Tuning Channel Edit
Move
Enter
TV
Add Close
1
MENU
Select C H A N N E L.
2
ENTER
Select M a n u a l T u n i n g.
3
ENTER
4 5
Select A d d or D e l e t e.
6
BACK
The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search. When setting the Auto tuning or Manual tuning, the number of maximum channel you can store is 900. It is subject to change depending on the broadcasting signal environment. Memorizes all the available channels in the order of DTV, TV, CADTV and CATV.
EXIT
Return to TV viewing.
47
Channel Editing
The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH or button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu.
48
CHANNEL
Auto Tuning Manual Tuning Channel Edit
Move
Enter
S11 0
TV
CATV
1 ARD 5 S 46 4 S 11 13 17 21 25 29 2 BBC1 6 C 05 4 C 52 14 18 22 26 30 4 ARD 7 C 06 11 15 19 23 27 31
4 C 01 8 C 10 12 16 20 24 28
Ch.Change
Move
CH
Page Change
Previous
Add/Delete
1
MENU
Select C H A N N E L.
2
ENTER
Select C h a n n e l E d i t.
3
ENTER
Keep pressing the button and use the or buttons to move between DTV, TV, CADTV and CATV. If the channel list is too long, use the C H or button to move between pages.
Select a channel.
4
Add or delete the channel.
5
BACK
EXIT
Return to TV viewing.
INPUT LIST
TV
AV1
AV2
Component1
Component2
INPUT
ENTER
42/50PJ250R
TV
AV1
AV2
Component1
HDMI1
Component2
TV
AV1
AV2
AV3
Component
HDMI3
HDMI2
HDMI1
RGB
T V: Select it to watch over-the-air and digital cable broadcasts. A V: Select them to watch a VCR or other external equipment. C o m p o n e n t: Select them to watch DVD or a Digital set-top box. R G B - P C: Select it to view PC input. H D M I: Select them to watch high definition devices.
49
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
50
Close
HDMI3
42/50PJ250R
Close
50/60PK550R
Select O P T I O N.
INPUT
2
ENTER
Select I n p u t L a b e l.
3
ENTER
4
Select the label.
EXIT
5
BACK
Return to TV viewing.
EXIT
Return to TV viewing.
CHANNEL LIST
You can check channels which are stored in the memory by displaying the channel list.
Channel List
Exit
Display the C h a n n e l L i s t.
Select a channel.
2
EXIT
51
Q.Menu
Aspect Ratio Picture Mode
F
52
Except 42/50PJ250R
1
CH
P A G E
or
1 4 7
2 5 8 0
3 6 9
2 3 4
Q.MENU
Select D e l / A d d / F a v.
Select F a v o r i t e.
EXIT
Return to TV viewing.
Favorite List
Exit
FAV
Select a channel.
2
EXIT
Return to TV viewing.
53
Off
Cinema
Game
Sport
54
1AV MODE
C i n e m a in AV mode, If you select C C i n e m a will be selected both for PICTURE menu - Picture Mode and AUDIO menu - Sound Mode respectively. O f f in AV mode, the If you select O P i c t u r e M o d e and S S o u n d M o d e P return to previous selected value. O f f: Disables the AV MODE. C i n e m a: Optimizes video and audio for watching movies. S p o r t: Optimizes video and audio for watching sports events. G a m e: Optimizes video and audio for playing games.
KEY LOCK
The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
1
MENU
Select O P T I O N.
2
ENTER
3
ENTER
Select O n or O f f.
4
BACK
EXIT
Return to TV viewing.
O n, if the TV is turned In K e y L o c k O off, to turn on the TV, press the INPUT, CH button on the TV or POWER, INPUT, CH or NUMBER buttons on the remote control. With the K e y L o c k O n, the display X K e y L o c k appears on the screen if any button on the front panel is pressed while viewing the TV (Except (power) botton).
55
Simplink allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus.
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
56
Move
Enter
Off On
1
MENU
Select O P T I O N.
2
ENTER
Select S I M P L I N K.
3
ENTER
Select O n or O f f.
4
BACK
EXIT
Return to TV viewing.
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop. G When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers and the TV speakers are turned off. G When the unit is connected to SIMPLINK Home Theater, set to Variable Out and turn off the TV Speaker to operate the Home Theater Speaker. At this time, the maximum volume of the Home Theater Speaker is set to the TV volume.
G
SIMPLINK Functions
D i r e c t P l a y : After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. S e l e c t A V d e v i c e : Enables you to select one of the AV devices connected to TV. D i s c p l a y b a c k : Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. P o w e r o f f a l l d e v i c e s : When you power off the TV, all connected devices are turned off. S w i t c h a u d i o - o u t : Offers an easy way to switch audio-out. S y n c P o w e r o n : When you play the connected AV device, TV will automatically turn on. (A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function) Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics Control).
1
Display S I M P L I N K menu.
2
ENTER
3
ENTER
SIMPLINK Menu
1
T V v i e w i n g: Switch to the previous TV channel regardless of the current mode. D I S C p l a y b a c k: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k: Control the connected VCR. H D D R e c o r d i n g s p l a y b a c k: Control recordings stored in HDD. A u d i o O u t t o H o m e T h e a t e r s p e a ke r / A u d i o O u t t o T V: Select Home Theater speaker or TV speaker for Audio Out.
1 2
G
3
4 5
G G
When no device is connected (displayed in gray) Selected Device When a device is connected (displayed in bright color)
57
ENTRY MODE
When you connect a USB device, this pop up menu is displayed, automatically. POP UP MENU will not be displayed while the OSD including Menu is activated. In USB device, you can not add a new folder or delete the existing folder. Here shown may be somewhat different from your TV.
IN
USB IN
IN
58
USB
PHOTO LIST MUSIC LIST MOVIE LIST
1
Q.MENU
Select Eject.
2
ENTER
3
ENTER
! NOTE
G
In order to avoid losing the USB memory stick, use the USB connector(sold separately) to fix the USB memory stick to the USB connector holder of the TV.
USB connector holder
USB Input Port USB Connector (sold separately) - Fix the one end of the USB connector to the USB memory stick and the other end to the USB connector holder.
USB
59
USB
PHOTO LIST
You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different.
You can play JPG files only. Only baseline scan is supported among JPG. (SOF0, SOF1 only) Non-supported files are displayed in the form of bitmap.
60
USB
Screen Components
1
MENU
2
Select U S B.
ENTER ENTER
1 2 3 4
Moves to upper level folder Current page/Total pages Total number of marked photos Corresponding buttons on the remote control
Photo List
Drive1 JMJ001
Page 2/3
No Marked KY103
09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
E
Up Folder
JMJ004
Navigation
Popup Menu
CH
Page Change
MARK
Mark
Exit
Up Folder
KR101 KR102 JMJ001 JMJ002 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
E
JMJ003 JMJ004
Navigation
Popup Menu
CH
Page Change
Drive1
JMJ001
Up Folder
KR101 KR102 JMJ001 JMJ002 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
E
1366x768, 125KB
JMJ003
Up Folder
JMJ004
Navigation
Popup Menu
CH
Page Change
1 2 3 4
ENTER
ENTER
Photo List
Page 2/3
No Marked
Page 2/3
No Marked
MARK
Mark
Exit
USB
G
KR103 KR104 KR105 09/10/2008 09/10/2008 09/10/2008 1366x768, 125KB
Close
09/10/2008
Mark All : Mark all photos on the screen. Unmark All : Deselect all marked photos. G D e l e t e or Delete Marked : Delete the selected photo item. G C l o s e : Close the pop-up menu.
G G
MARK
Mark
Exit
button to navigation in the photo page. Use the M A R K button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.
61
USB
Photo List
Drive1
JMJ001
Page 2/3
No Marked
KR103 KR104 KR105 JMJ005 JMJ006 JMJ007 JMJ008
E
Up Folder
KR101 KR102 JMJ001 JMJ002 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
1366x768, 125KB
JMJ003
Up Folder
JMJ004
Navigation
Popup Menu
CH
Page Change
MARK
Mark
Exit
62
USB
Photo List
Drive1
JMJ001
Page 2/3
No Marked
KR103 KR104 KR105 JMJ005 JMJ006 JMJ007 JMJ008
E
Up Folder
KR101 KR102 JMJ001 JMJ002 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
1366x768, 125KB
JMJ003
1/17
Q.MENU
Up Folder
JMJ004
OPTION
Slideshow
MARK
BGM
Delete
Hide
Navigation
Popup Menu
CH
Page Change
Mark
Exit
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. Press the B A C K button to move to the previous menu screen.
1 2 3 4 5
ENTER
ENTER
ENTER
Select V i e w
6
ENTER
(Rotate),
Use
1/17
Q.MENU
OPTION
Slideshow
BGM
Delete
Hide
button to select the previous or next photo. Use button to select and control the menu on the full-sized screen.
S l i d e s h o w : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed during slide show. S et the time interval of the slide show in O p t i o n. B G M : Listen to music while viewing photos in full size. Set the BGM device and album in O p t i o n . ( R o t a t e ) : Rotate photos. Rotates the photo 90, 180, 270, 360 clockwise.
USB
D e l e t e : Delete photos. H i d e : Hide the menu on the full-sized screen. To see the menu again on the full-sized screen, press O K button to display.
63
USB
Choose Options
1/17
Q.MENU
OPTION
Slideshow
BGM
Delete
Hide
64
USB
! NOTE
G
If you select Off for TV speaker, S e t A u d i o features in Choose Options will not work.
1 2
Q.MENU
ENTER
Select S e t P h o t o V i e w, S e t V i d e o or S e t A u d i o.
Fast
Prev.
1
ENTER
Show the S l i d e S p e e d or M u s i c A l b u m.
ENTER
Set Video.
Picture Mode Contrast Brightness Sharpness Color Tint Color Temperature Noise Reduction Picture Reset Prev. 100 50 70 70 0 0
R G
Vivid
Medium
USB
1
ENTER
Show the P i c t u r e M o d e.
2
ENTER
Set Audio
Sound Mode Auto Volume Clear Voice ll Balance 0
L
Prev.
1 2
ENTER
ENTER
65
USB
MUSIC LIST
You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different.
Supported music file: *.MP3 Bit rate range 32 kbps ~ 320 kbps Sampling rate MPEG1 layer 3: 32 KHz ~ 48 KHz
Total number of marked music title Corresponding buttons on the remote control
Music
S003
00:00/01:34
Navigation
Popup Menu
CH
Page Change
Q.MENU
66
USB
Screen Components
1
MENU
2
Select U S B.
ENTER ENTER
1 2
Music List
Page 2/3
No Marked
Duration
Option
MARK
Mark
Exit
Music List
Music
S003
Page 2/3
Up Folder 001. S001 003. S002 004. S003 03:33 04:45 01:30 02:37 01:58
E
00:00/01:34 Up Folder
Navigation
Popup Menu
CH
Page Change
Q.MENU
Option
MARK
Mark
Exit
Music List
Music
S003
Page 2/3
Play
03:33
00:00/01:34 Up Folder
02:37 01:58
P l a y (During stop) : Play the selected music titles. Once a music finishes playing, the next selected one will be played. When there are no selected music titles to play, the next one in the current folder will be played. G P l a y M a r k e d : Play the selected music titles. Once a music finishes playing, the next selected one will be played automatically. G S t o p P l a y (During playback) : Stop the playing music titles. G P l a y w i t h P h o t o : Start playing the selected music titles and then move to the Photo List. G M a r k A l l : Mark all music titles in the folder. G U n m a r k A l l : Deselect all marked music titles. G D e l e t e : Delete the selected music titles. G C l o s e : Close the pop-up menu.
G
USB
Navigation
Popup Menu
CH
Page Change
Q.MENU
Option
MARK
Mark
Exit
1 2 3 4
Use the C H
ENTER
ENTER
button to navigation in the music page. Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked music title will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.
ENTER
67
USB
Using the Music List function, play
Music List
Music
S003
Page 2/3
Set Audio
Sound Mode Cinema Off Off 0
L R
Up Folder 001. S001 003. S002 004. S003 03:33 04:45 01:30 02:37 01:58
E
00:00/01:34 Up Folder
Navigation
Popup Menu
CH
Page Change
Q.MENU
Option
MARK
Mark
Exit
Prev.
1
USB
Q.MENU
Show the S o u n d M o d e.
If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. The Screen Saver? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
! NOTE
When music is playing, is displayed in back of the music title. A damaged or corrupted music does not play but displays 00:00 in playtime. G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. If G you press O K, A buttons, screen saver is stopped. G This TV can not play music files less than 32 Kbytes. G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode. G You can use the GG button to select the next music and the FF button to select the previous music. G If you select Off for TV speaker, S e t A u d i o features in Choose Options will not work.
G G
68
MOVIE LIST
The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. Editing such as delete and add is not allowed. It is a movie list that displays folder information and Divx file. Supports up to four drives. MOVIE(*.avi/*.Divx) supporting file Video format : MPEG1 , MPEG2, MPEG4 (Doesnt support Microsoft MPEG4-V2, V3), DivX 3.xx , DivX 4.xx, DivX 5.xx , DivX VOD ( DRM ) , XviD, DivX 6.xx(Playback) Audio format : Mpeg, Mp3, PCM, Dolby Digital. Sampling frequency : 32k ~ 48kHz Bit rate : 32k ~ 320kbps Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System) Some user-created subtitles may not work properly. Time information in an external subtitle file should be arranged in ascending order to be played. The video file and the subtitle file must be located in the same folder. The name of the video file and the subtitle file must be the same to view the subtitles normally. If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. Playing a video via a USB connection that does not support high speed may not work properly. USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list. DivX may not be played depending on its types or recording methods. If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. Max bitrate of playable DivX is 4Mbps. Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or 30 FPS (720*480) depending on Resolution. Files of 25 FPS or 30 FPS of higher may not be played properly. Files encoded with GMC(Global Motion Compensation) may not be played. Certain video files created with an encoder may not be played. Some of subtitle files that are not ordered in sequence may not be display.
USB
Video Codec MPEG1, MPEG2 MPEG 4-SP, MPEG4-ASP, Divx 3.xx,Divx 4.xx, Divx 5.xx, Divx 6.xx(Playback), Xvid
Resolution
69
USB
Screen Components
1
MENU
2
Select U S B.
ENTER ENTER
1 2 3
Total number of marked movie title Corresponding buttons on the remote control
Movie List
Page 2/3
No Marked Title
Duration
640x480, 720KB
70
USB
Navigation
Popup Menu
CH
Page Change
MARK
Mark
Exit
! NOTE
G G G
A DivX movie file and its subtitle file must be located in the same folder. A video file name and its subtitle file name must be identical for it to be displayed. Use the left/right ( / ) keys to move to a specific frame forward or backward while playing a movie. (The left/right ( / ) keys may not work properly for some files while playing a movie.)
Movie
H003
H004 H005
E
Navigation
Popup Menu
CH
Page Change
Movie
H003
H004 H005
E
Navigation
Popup Menu
CH
Page Change
1 2
ENTER
3 4
ENTER
ENTER
Movie List
Page 2/3
No Marked
Movie List
Page 2/3
No Marked
Duration
MARK
Mark
Exit
Duration
P l a y : Play the selected movie titles. Divx Play is executed while screen changes. G P l a y M a r k e d : Play the selected movie titles. Once a movie finishes playing, the next selected one will be played automatically. G M a r k A l l : Mark all movie titles in the folder. G U n m a r k A l l : Deselect all marked movie titles. G D e l e t e : Delete the selected movie titles. G C l o s e : Close the pop-up menu.
G
USB
MARK
Mark
Exit
71
USB
Using the Movie List function, play
Choose Options
Set Video Play. Set Video. Set Audio. Prev.
Q. MENU Option
1 2
Q.MENU
ENTER
72
USB
. Language . Sync . Position
P i c t u r e S i z e : Selects your desired picture format during movie play. G A u d i o L a n g u a g e & S u b t i t l e L a n g u a g e : Changes the Language Group of the audio/subtitle during movie play. G S y n c : Adjusts the time synchronisation of the subtitle from -10 secs ~ +10 secs by steps of 0.5 secs during movie play. G P o s i t i o n : Changes the position of the subtitle either up or down during movie play.
G
Prev.
1
ENTER
Show the P i c t u r e S i z e, A u d i o L a n g u a g e, or S u b t i t l e L a n g u a g e.
2
ENTER
Subtitle Language Latin1 Latin2 Latin4 Latin5 Cyrillic Greek Hebrew Chinese Thai Arabic
Support Language French, Spanish, Catalan Basque, Portuguese, Italian, Albanian, Rhaeto-Romanic, Dutch, German, Danish, Swedish, Norwegian, Finnish, Faroese, Icelandic, Irish, Scottish, English Czech, Hungarian, Ploish, Romanian, Croatian, Slovak, Slovenian, Sorvian Estonian, the Baltic languages Latvian(Lettish) and Lithuanian, Greenlandic and Lappish English, Trukish Bulgarian, Byelorussian, Macedonian, Russian, Serbian and pre-1990 (no ghe with upturn) Ukrainian English, modern Greek English, modern Hebrew Chinese Thai English, Arabic
! NOTE
Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. G Subtitles in languages other than the supported languages are not available.
G G
USB
Picture Mode Contrast Brightness Sharpness Color Tint Color Temperature Noise Reduction Picture Reset 100 50 70 70 0 0
Vivid
! NOTE
G
Auto Power Save
Medium
Prev.
1
ENTER
Show the P i c t u r e M o d e.
ENTER
73
USB
Standard
Off Off
R
Prev.
1
ENTER
74
USB
2
ENTER
FF
/ GG
II
During playback, press the P a u s e( I I) button. Still screen is displayed. When using the or button during playback a cursor indicating the position can be viewed on the screen.
P L A Y ( G)
USB
Photo List Music List Movie List DivX DivX Reg. Reg. Code Code Deactivation
Move
ENTER
DivX(R) Video On Demand Your registration code is : xxx xxxxxxx To learn more visit www.divx.com/vod Close
1
MENU
USB
Select U S B.
2
ENTER
3
ENTER
Display D i v x R e g . C o d e.
Press the M E N U / E X I T button to return to normal TV viewing. Press the B A C K button to move to the previous menu screen.
75
USB
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
ABOUT DIVX VIDEO:DivX is a digital video format created by DivX,Inc.This is an official DivX Certified device that plays DivX video.Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND:This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD)content.To generate the registration code, locate the DivX VOD section in the device setup menu.Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. DivX Certified to play DivX video,including premium content Pat.7,295,673;7,460,688;7,519,274
76
USB
! NOTE
Supported movie file Resolution : under 720x480(720x576) WxH pixels. Frame rate : under 30 frames/sec Video Codec : MPEG1, MPEG2, MPEG4(Doesnt support Microsoft MPEG4-V2, V3), DivX3.xx, DivX4.xx, DivX5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback) G When loading, some buttons may not work. G If you use the DivX registration code of another device, the rented or purchased DivX file cannot be played. Therefore always use the DivX registration code assigned to this product.
G
DEACTIVATION
Delete the existing authentication information to receive a new DivX user authentication for TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Photo List Music List Movie List DivX Reg. Code Deactivation Deactivation
Move
OK
USB
Photo List Music List Movie List DivX Reg. Code Deactivation Deactivation
Move
OK
USB
1
MENU
Select U S B.
2
ENTER
Select Deactivation.
3
ENTER
Select Y e s or N o.
4
ENTER
Press the M E N U / E X I T button to return to normal TV viewing. Press the B A C K button to move to the previous menu screen.
77
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB input source use 4:3 or 16:9 aspect ratio.
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid Contrast Sharpness Color Tint
E
Move
Enter
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid Contrast Sharpness Color Tint
E
Move
Enter
100 70 70 0
R G
100 70 70 0
R
Brightness 50
Brightness 50
1
MENU
78
PICTURE CONTROL
Select P I C T U R E.
2
ENTER
Select A s p e c t R a t i o.
You can also adjust A s p e c t R a t i o in the Q . M E N U. Press the R A T I O button repeatedly to select the desired picture format.
3
ENTER
4
BACK
EXIT
Return to TV viewing.
16:9
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
Zoom
Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
Just Scan
Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. J u s t S c a n operates only in Component/HDMI/DVI(720p/1080i/1080p) input source.
Cinema Zoom1
Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the pictrue, the image may become distorted. or button: Adjust enlarge proportion of Cinema Zoom. The adjustment range is 1-16.
PICTURE CONTROL
4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.
79
PICTURE CONTROL
PRESET PICTURE SETTINGS (PICTURE MODE)
There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually.
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid Contrast Sharpness Color Tint
E
Move
Enter
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid Contrast Sharpness Color Tint
E
Move
Enter
100 70 70 0
R G
Brightness 50
1
MENU
Select P I C T U R E.
2
ENTER
Select P i c t u r e M o d e.
3
ENTER
Select V i v i d, S t a n d a r d, S p o r t, or G a m e.
, C i n e m a,
4
BACK
EXIT
Return to TV viewing.
V i v i d, S t a n d a r d, , C i n e m a, S p o r t, and G a m e Settings are preset for the optimum picture quality at the factory. You can also adjust P i c t u r e M o d e in the Q . M e n u. V i v i d: This is the mode to maximize the effect of the video in the retail store. Strengthen the contrast, brightness, sharpness and color for vivid picture. S t a n d a r d: This is the mode to realize optimum viewing condition for the general user. : This mode maximizes reducting the power consumption without hurting the picture quality. C i n e m a: This mode optimizes video for watching movies. S p o r t: This is the video mode to emphasize dynamic video and primary color (Ex, white, uniform, grass, sky blue etc.) by realizing the optimal screen for sports. G a m e: This is the mode to realize fast response speed in a fast gaming screen.
Auto Power Save Auto Power Save
80
PICTURE CONTROL
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid Contrast Sharpness Color Tint
E
Move
Enter
100 70 70 0
R G
Contrast
80
E
Brightness 50
Enter
1
MENU
Select P I C T U R E.
2
ENTER
Select P i c t u r e M o d e.
3
ENTER
4
ENTER
Select V i v i d, S t a n d a r d, S p o r t or G a m e.
, C i n e m a,
5
ENTER
6
BACK
EXIT
Return to TV viewing.
C o n t r a s t: Increase or decrease the gradient of the vidoe signal. You may use Contrast when the bright part of picture is saturated. B r i g h t n e s s: Increases or decreases the black level of video signal. You may use Brightness when the black level of the picture is not visible. S h a r p n e s s: Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. C o l o r: Adjusts intensity of all colors. T i n t: Adjusts the balance between red and green levels. C o l o r T e m p e r a t u r e: Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish.
E E
PICTURE CONTROL
81
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the P i c t u r e R e s e t function for each Picture Mode.
PICTURE
Brightness Sharpness Color Tint Color Temperature Advanced Control Picture Reset Screen
E
Move
Enter
PICTURE
Brightness Sharpness Color Tint
E
Move
Enter
50 70 70 0 0
W C
50 70
F W
70 Dynamic Contrast 0
Off
C Off
Dynamic Color0 Color Temperature Advanced Control Noise Reduction Picture Reset Gamma Screen Black Level Film Mode
82
PICTURE CONTROL
42/50PJ250R
1
MENU
Select P I C T U R E.
2
ENTER
Select A d v a n c e d C o n t r o l.
3
ENTER
4
Select your desired options.
5
BACK
EXIT
Return to TV viewing.
Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. Reduces screen noise without compromising video quality.
Gamma
Low : Make dark and middle gray level area of the picture brighter. Medium: Express original picture levels. High: Make dark and middle gray level area of the picture darker. You can adjust brightness of dark area and middle gray level area of the picture. Low: The reflection of the screen gets darker. High: The reflection of the screen gets brighter. Auto: Realizing the black level of the screen and set it to High or Low automatically. Set black level of the screen to proper level. This function enables to select 'Low' or 'High' in the following mode: TV, AV, HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
PICTURE CONTROL
Black Level
Film Mode
Makes video clips recorded in film look more natural. DVD and Blu-ray movies are filmed at 24 frames per second.
83
PICTURE CONTROL
ENERGY SAVING
It reduces the TVs power consumption. You can increase the brightness of your screen by adjusting the E n e r g y S a v i n g level or by setting the P i c t u r e M o d e.
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid Contrast Sharpness Color Tint
E
Move
Enter
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid
Move
Enter
Intelligent Sensor
100 70 70 0
R G
Brightness 50
Off 100 Minimum Brightness 50 Medium Sharpness 70 Maximum Color 70 Screen Off Tint 0R Contrast
E
1
MENU
Select P I C T U R E.
2
ENTER
Select
E n e r g y S a v i n g.
84
PICTURE CONTROL
3
ENTER
4
BACK
EXIT
Return to TV viewing.
Intelligent sensor? This function automatically adjusts the brightness of screen to the most suitable picture according to the surrounding conditions. You can also press the E N E R G Y S A V I N G botton on the remote control. When selecting S c r e e n o f f, TV turned off after 3 seconds.
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Brightness Sharpness Color Tint Color Temperature Advanced Control Picture Reset Screen
E
Move
Enter
PICTURE
Brightness Sharpness Color Tint
E
Move
Enter
50 70 70 0 0
W C
50 70 70 0 0
W C
1
MENU
Select P I C T U R E.
PICTURE CONTROL
2
ENTER
Select P i c t u r e R e s e t.
3
ENTER
4
EXIT
Return to TV viewing.
85
PICTURE CONTROL
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
: English : On : Off : Off :1 : Normal : Off Normal Orbiter Color Wash White Wash
1
MENU
86
PICTURE CONTROL
Select O P T I O N.
2
ENTER
Select I S M M e t h o d.
3
ENTER
4
BACK
EXIT
Return to TV viewing.
N o r m a l: If image sticking is never a problem, ISM is not necessary - set to Normal. O r b i t e r : Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a ghost image on the screen, the image will move every 2 minutes. C o l o r W a s h: The color block with the screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred while the temporary afterimage is removed and the color pattern is operating. W h i t e W a s h : White Wash removes ghost images from the screen. Use sparingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own.
! NOTE
G
An excessive ghosted image may be impossible to clear entirely with Color Wash and White Wash. To return to normal viewing, press any button.
DEMO MODE
Use it to see the difference between XD Demo on and XD Demo off. M o d e S e t t i n g - H o m e U s e. This feature is disabled in M
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
Off
On
PICTURE CONTROL
1
MENU
Select O P T I O N.
2
ENTER
Select D e m o M o d e.
3
ENTER
Select O n . D e m o M o d e starts.
4
EXIT
Return to TV viewing. If you want to stop the demo, press any button.
87
PICTURE CONTROL
INITIAL SETTING (FACTORY RESET)
Use to quickly reset all the menu options to their original factory preset values. All user settings and channel settings will be reset.
OPTION
SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode Mode Setting Initial Setting
E
Move
Enter
OPTION
SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode Mode Setting Initial Setting
! E
Move
Enter
: On : Off : Off All user settings and channel settings will be :1 reset. : Normal Still continue? : Off Yes : Home Use
No
1
PICTURE CONTROL
MENU
Select O P T I O N.
2
ENTER
Select I n i t i a l S e t t i n g.
3
ENTER
Select Y e s or N o.
4
BACK
EXIT
Return to TV viewing.
88
AUDIO
Auto Volume Clear Voice ll Balance Sound Mode : Standard : Off : Off Level
Move
Enter
AUDIO
Auto Volume Clear Voice ll : Off : Off Level Balance Sound Mode : Standard
Move
Enter
Off On 3 0
L + R
3 0
+ R
50 50
50 50
1
MENU
Select A U D I O.
2
ENTER
Select A u t o V o l u m e.
3
ENTER
Select O n or O f f.
4
BACK
Return to TV viewing.
EXIT
89
AUDIO
Auto Volume Clear Voice ll Balance Sound Mode : Standard : Off : Off Level
Move
Enter
AUDIO
Auto Volume Clear Voice ll : Off : Off Level Balance Sound Mode : Standard
Move
Enter
Off 3 0
L
3 0
+ R
On
+ R
50 50
50 50
1
MENU
Select A U D I O.
2
ENTER
Select C l e a r V o i c e I I.
3
ENTER
Select O n or O f f.
90
4
ENTER
Select L e v e l.
5
ENTER
6
BACK
EXIT
Return to TV viewing.
AUDIO
Auto Volume Clear Voice ll Balance Sound Mode : Standard : Off : Off Level
Move
Enter
AUDIO
Auto Volume Clear Voice ll : Off : Off Level Balance Sound Mode : Standard Treble
Move
Enter
3 0
+ R
+ R
0 L Standard
50 50
1
MENU
Select A U D I O.
2
ENTER
Select S o u n d M o d e.
3
ENTER
Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e.
4
BACK
Return to TV viewing.
EXIT
You can also adjust S o u n d M o d e in the Q . M E N U. S t a n d a r d: Offers standard-quality sound. M u s i c: Optimizes sound for listening to music. C i n e m a: Optimizes sound for watching movies. S p o r t: Optimizes sound for watching sports events. G a m e: Optimizes sound for playing games.
91
Move
Enter
AUDIO
Auto Volume Clear Voice ll : Off : Off Level Balance Sound Mode : Standard
Move
Enter
3 0
+ R
50
Close
1
MENU
Select A U D I O.
2
ENTER
Select S o u n d M o d e.
3
ENTER
Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e.
4
ENTER
Select T r e b l e or B a s s.
5
ENTER
6
BACK
EXIT
Return to TV viewing.
92
50
Off
E
INFINITE SOUND
Select this option to sound realistic.
Move
Enter
AUDIO
Auto Volume Clear Voice ll : Off : Off Level Balance Sound Mode : Standard
Move
Enter
3 0
+ R
50 50
Infinite Sound : Off Infinite Sound 50 Treble 50 Bass 50 Bass 50 E Treble Close
1
MENU
Off
Select A U D I O.
2
ENTER
Select I n f i n i t e S o u n d.
3
ENTER
Select O n or O f f.
4
BACK
If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments.
EXIT
Return to TV viewing.
93
AUDIO
Auto Volume Clear Voice ll Balance Sound Mode : Standard : Off : Off Level 3
Move
Enter
AUDIO
Auto Volume Clear Voice ll : Off : Off Level Balance Sound Mode : Standard 3
Move
Enter
+ R
+ R Balance
Close
50 50
50 50
1
MENU
Select A U D I O.
2
ENTER
Select B a l a n c e.
3
ENTER
4
BACK
EXIT
Return to TV viewing.
94
AUDIO
Balance Sound Mode 0 : Standard
E
Move
Enter
AUDIO
Balance Sound Mode : Standard
E
Move
Enter
1
MENU
Select A U D I O.
2
ENTER
Select T V S p e a k e r.
3
ENTER
Select O n or O f f.
4
BACK
EXIT
Return to TV viewing.
! NOTE
G
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the home theater speaker, but when the TV speaker is turned on, the sound outputs to the TV speaker.
95
AUDIO
Balance Sound Mode : Standard
E
Move
Enter
AUDIO
Balance Sound Mode : Standard
E
Move
Enter
Bass Reset : On
50
1
MENU
Select A U D I O.
2
ENTER
96
Select R e s e t.
3
ENTER
4
EXIT
Return to TV viewing.
Q.Menu
Aspect Ratio Picture Mode Sound Mode Caption SAP Sleep Timer
CH
Except 42/50PJ250R
1
Q.MENU
Select S A P.
2 3
EXIT
Select M O N O, S T E R E O, or S A P.
Return to TV viewing.
97
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
: English Menu Language English : Off : Off : Off :1 : Normal : Off Espaol Portugus
Confirm
1
MENU
Select O P T I O N.
98
2
ENTER
Select M e n u L a n g u a g e.
3
ENTER
Select your desired language. From this point on, the on-screen menus will be shown in the selected language.
4
BACK
Return to TV viewing.
EXIT
CLOSED CAPTIONS
Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance. Its possible to caption a live program by using a process called real-time captioning, which creates captions instantly. Real-time captioning is normally done by professional reporters using a machine shorthand system and computer for translation into English. FOLLOW ME Captioning is an effective system for the hearing-impaired, and it can also aid in teaching language skills. The picture at left shows a typical caption. Caption Tips Not all TV broadcasts include closed caption signals. Sometimes TV stations broadcast four different caption signals on the same channel. By selecting Mode1 to Mode2, you can choose which signal you view. Mode1 is usually the signal with the captions, while another mode might show demonstration or programming information. Your TV might not receive caption signals normally in the following situations.
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
: English
On Mode1
: Normal Mode
1
MENU
Select O P T I O N.
2
ENTER
Select C a p t i o n.
3
ENTER
Select O n or O f f.
4
2 or T e x t 1 -2 2. Select M o d e1 -2
5
BACK
EXIT
Return to TV viewing.
99
TIME SETTING
CLOCK SETTING
Clock Setup
You must set the time correctly before using on/off timer function.
TIME
Clock Off Time On Time Sleep Timer : Off : Off : Off
Move
Enter
TIME
Clock Off Time On Time Sleep Timer : Off : Off : Off
Move
Enter
F
Hour Minute
2AM -Close
1
MENU
Select T I M E.
2
ENTER
Select C l o c k.
3
ENTER
100
TIME SETTING
4
BACK
If this TV is unplugged once or turn off with the (power) button on the TV, reset the Clock function.
Return to TV viewing.
EXIT
TIME
Clock Off Time On Time Sleep Timer : Off : Off : Off
Move
Enter
TIME
Clock Off Time On Time Sleep Timer : Off
Move
Enter
2:10 AM
F
On 2 AM 10 TV 2 30
Close
1
MENU
Select T I M E.
2
ENTER
TIME SETTING
Select O f f t i m e or O n t i m e.
3
ENTER
4
ENTER
5
BACK
EXIT
Return to TV viewing.
101
TIME SETTING
SLEEP TIMER SETTING
The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
TIME
Clock Off Time On Time Sleep Timer : Off : Off : Off
Move
Enter
TIME
Clock Off Time On Time Sleep Timer : Off : Off : Off
Move
Enter
Off 10 min. 20 min. 30 min. 60 min. 90 min. 120 min. 180 min. 240 min.
1
MENU
Select T I M E.
2
ENTER
Select S l e e p T i m e r.
102
TIME SETTING
3
ENTER
4
BACK
You can also adjust S l e e p T i m e r in the Q . M E N U . Press the S L E E P button repeatedly to select the number of minutes. (Except 42/50PJ250R)
Return to TV viewing.
EXIT
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct polarity (+ to +, - to -). Ensure that the correct remote operating mode is set: TV, VCR etc. Install new batteries. *This feature is not available for all models. Is the sleep timer set? Check the power control settings. Power interrupted. TV will be automatically turned off, in case of no signal for 15 minutes.
The video does not work. Check whether the product is turned on. Try another channel. The problem may be with the broadcast. Is the power cord inserted into wall power outlet? Check your antenna direction and/or location. Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in.
This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option. Keep a sufficient distance between the product and a VCR. Try another channel. The problem may be with the broadcast. Are the video cables installed properly? Activate any function to restore the brightness of the picture.
APPENDIX
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures
Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. Check for sources of possible interference.
Check HDMI cable over version 1.3. The HDMI cables dont support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.
103
APPENDIX
The audio does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly?
No output from one of the speakers Unusual sound from inside the product
Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
Check HDMI cable over version 1.3. Check USB cable over version 2.0. Use normal MP3 file.
Adjust resolution, horizontal frequency, or vertical frequency. Check the input source.
Vertical bar or stripe on background & Horizontal Noise & Incorrect position Screen color is unstable or single color
Work the Auto configure or adjust size, phase, or H/V position. (Option)
104
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
CAUTION
G
If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges.
APPENDIX
105
APPENDIX
PRODUCT SPECIFICATIONS
MODELS Dimensions (Width x Height x Depth) With stand Without stand With stand Without stand MODELS Dimensions (Width x Height x Depth) With stand Without stand 42PJ250R (42PJ250R-MA)
988 x 688.5 x 260 mm 38.8 x 27 .1 x 10.2 inches 7 .8 x 55.3 mm 988 x 61 38.8 x 24.3 x 2.1inches 21.6 kg / 47 .6 lbs 20.0 kg / 44.0 lbs
50PJ250R (50PJ250R-MA)
1 1 71.4 x 781.8 x 309.7 mm 46.1 x 30.7 x 1 2.1inches 1 1 71.4 x 720.9 x 55.3 mm 46.1 x 28.3 x 2.1inches 30.0 kg / 66.1 lbs 27.6 kg / 60.8lbs
Weight
42PJ350R (42PJ350R-MA)
988 x 688.5 x 260 mm .1 x 1 0.2 inches 38.9 x 27 988 x 61 7 .8 x 55.3 mm 38.8 x 24.3 x 2.2inches 21.6 kg / 47 .6 lbs 20.0 kg / 44.0 lbs
50PJ350R (50PJ350R-MA)
1 1 71.4 x 781.8 x 309.7 mm 46.1 x 30.7 x 1 2.2inches 1 1 71.4 x 720.9 x 55.3 mm 46.1 x 28.4 x 2.2inches 30.0 kg / 66.1 lbs 27.6 kg / 60.8 lbs
Weight
Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity
AC100-240V ~ 50/60Hz NTSC, PAL-M/N VHF 2-13, UHF 14-69, CATV 1-125 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80% -4 ~ 140F (-20 ~ 60C) Less than 85%
Environment condition
106
APPENDIX
MODELS Dimensions (Width x Height x Depth) With stand Without stand With stand Without stand MODELS Dimensions (Width x Height x Depth) With stand Without stand
42PJ260R (42PJ260R-MA)
988 x 688.5 x 260 mm 38.8 x 27 .1 x 10.2 inches 7 .8 x 55.3 mm 988 x 61 38.8 x 24.3 x 2.1inches 21.6 kg / 47 .6 lbs 20.0 kg / 44.0 lbs
50PJ260R (50PJ260R-MA)
1 1 71.4 x 781.8 x 309.7 mm 46.1 x 30.7 x 1 2.1inches 1 1 71.4 x 720.9 x 55.3 mm 46.1 x 28.3 x 2.1inches 30.0 kg / 66.1 lbs 27.6 kg / 60.8lbs
Weight
50PK550R (50PK550R-MA)
1171.4 x 786.2 x 309.7 mm 46.1 x 30.9 x 12.1 inches 1171.4 x 724.4 x 55.3 mm 46.1 x 28.5 x 2.1 inches 31kg / 68.3 lbs 28.6 kg / 63.0 lbs
60PK550R (60PK550R-MA)
1392 x 915 x 367 mm 54.8 x 36 x 14.4 inches 1392 x 852 x 55.3 mm 54.8 x 33.5 x 2.1 inches 49.5 kg / 109.1 lbs 45.0 kg / 99.2 lbs
Weight
Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity
AC100-240V ~ 50/60Hz NTSC, PAL-M/N VHF 2-13, UHF 14-69, CATV 1-125 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80% -4 ~ 140F (-20 ~ 60C) Less than 85%
Environment condition
APPENDIX
The specifications shown above may be changed without prior notice for quality improvement.
107
APPENDIX
IR CODES
1. How to Connect
Connect your wired remote control to the Remote Control port on the TV.
Output waveform
Single pulse, modulated with 37 .917KHz signal at 455KHz
Tc
T1
Configuration of frame
1st frame
Lead code Low custom code High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
Tf
Lead code
9 ms 4.5 ms
108
APPENDIX
Repeat code
0.55 ms
9 ms
2.25 ms
Bit 1
0.56 ms 2.24 ms
Code (Hexa)
08 45 43 0B 10-19 09 02 03 00 01 1E 40 41 07 06 7C 44 28 7E 30 79 95 53 1A BA 72 63 61 71 8F 8E 5E B1 B0 0F 5B
Function
POWER Q.MENU MENU INPUT Number Key 0-9 MUTE VOL + VOL CH CH FAV
Note
Remote control Button (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button
X STUDIO ENTER BACK SIMPLINK AV MODE RATIO ENERGY SAVING LIST Q.VIEW FREEZE RED YELLOW(PLAY) BLUE (PAUSE) GREEN (STOP) Rew FF FF GG CLEAR VOICE ll Stop A Play G TV EXIT
Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button
Except 42/50PJ250R
APPENDIX
For 42/50PJ250R
109
APPENDIX
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. In USB and Bluetooth mode, it doesnt support RS-232C function.
RS-232C Setup
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
AV
L
2
HDMI IN
RGB (PC)
IN1
AUDIO
PR
ANTENNA IN
2
PC
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
Communication Parameters
Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable.
1 2 3 4 5 6 7 8 9
110
COMPONENT IN
PB
APPENDIX
RS-232C Configurations
Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) PC RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 D-Sub 9 TV 3 2 5 6 4 8 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations (Not standard) PC 2 3 5 4 6 7 8 D-Sub 9 TV 3 2 5 6 4 7 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS
Set ID
Use this function to specify a TV ID number. Refer to Real Data Mapping.
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
OPTION
Menu Language Input Label SIMPLINK Key Lock Caption Set ID ISM Method Demo Mode
E
Move
Enter
: Normal : Off
1
Close
APPENDIX
1
MENU
Select O P T I O N.
2
ENTER
* Real data mapping 1 00 : Step 0 A : Step 10 F : Step 15 10 : Step 16 64 : Step 100 6E : Step 1 10 73 : Step 1 15 74 : Step 1 16 C7 : Step 199 FE : Step 254 FF : Step 255
Select Set ID. Choose the desired TV ID number. The adjustment range of Set ID is 1~ 99. Return to the previous menu.
* Real data mapping 2 00: -30 01: -29 02: -28 1E: 0
3
ENTER
28: +10 3A : +28 3B : +29 3C : +30 4E: N/A 4F : N/A 50: N/A
4
BACK
EXIT
Return to TV viewing.
111
APPENDIX
Command Reference List
COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal)
01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07 . Brightness 08. Colour 09. Tint 10. Sharpness 1 1. OSD Select 12. Remote Control Lock /Key Lock Mode 13. Balance
k k k k k k k k k k k k k
a c d e f g h i j k l m t
14. Colour Temperature 15. Treble 16. Bass 17 . Abnormal Status 18. ISM Method 19. Auto Configure 20. Energy Saving 21. Tune Command 22. Channel Add/Del 23. Key 24. Input select (Main)
x k k k j j j m m m x
u r s z p u q a b c b
112
APPENDIX
0 1 . Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Data 01 : Power On
0 5 . Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to Real data mapping 1 . Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * If there is the time delay between command and ack message during power on sequence, It should be described like Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 02. Aspect Ratio (Command: k c) (Main picture size) To adjust the screen format. (Main picture format) You can adjust the screen format using the Aspect Ratio in the PICTURE menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01: Normal screen (4:3) Data 02: Wide screen (1 6:9) Data 04: Zoom Data 1 0~1F: Cinema Zoom1~ 1 6 Data 09: Just Scan
0 6 . Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to Real data mapping 1. Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 7 . Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to Real data mapping 1. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] * Using the RGB-PC, Component or HDMI input, you select either 16:9 or 4:3 screen aspect ratio. * In HDMI/Component (over 720p)mode, Just Scan is available. 0 3 . Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture/Panel on) Data 01 : Screen mute on (Panel off) Data 10 : Video mute on (Picture Off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] In case of Video-Out mute on only, TV will display On Screen Display(OSD) But, In case of Screen Mute On, TV will not display OSD. 04. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) Data 01 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
08. Color (Command: k i) To adjust the screen color. You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to Real data mapping 1. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
09. Tint (Command: k j) To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 ~ Green : 64 Refer to Real data mapping 1. Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]
113
APPENDIX
10. Sharpness (Command: k k) To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 Refer to Real data mapping 1. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 11. OSD Select (Command: k l) To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK][Data][x] 17. Abnormal State (Command: k z) 12. Remote Control Lock/Key Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. (If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.) Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Lock off Data 01: Lock on To recognize an abnormal state. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF: Read Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Data 00: Normal (Power on and signal exist) Data 01: No signal (Power on) Data 02: Turn the TV off by remote control Data 03: Turn the TV off by sleep time function Data 04: Turn the TV off by RS-232C function Data 05: 5V down Data 06: AC down Data 08: Turn the TV off by Off time function Data 09: Turn the TV off by Auto off function * This function is read only. 16. Bass (Command: k s) To adjust bass. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 Refer to Real data mapping 1. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 15. Treble (Command: k r) To adjust treble. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 Refer to Real data mapping 1. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 13. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu.
114
APPENDIX
Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 Refer to Real data mapping 1. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
14. Color Temperature (Command: x u) To adjust color temperature. You can also adjust Color Temperature in the PICTURE menu. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data W50 : 00 ~ C50 : 64 Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
18. ISM Method (Command: j p) To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr]
MSB 0 0 0 0 0 0 0
LSB 0
Data 02: Orbiter Data 04: White Wash Data 08: Normal Data 20: Color Wash
APPENDIX
28: +10
115
APPENDIX
21 . Channel Tuning (Command: m a) Tune Channel to following Physical/ major/ minor number. Transmission Data0 :[m ][a ][ ][Set ID ][][Data0] [ ] [Data1][ ][Data2 ][Cr ] Data0 :Physical Channel Number(Transmit by Hexadecimal code) NTSC air:02-45 NTSC cable:01,0e~7d Data1,Data2 :Major Channel(two part)or Channel Number(one part) Data1 :High byte Data2 :Low Byte Two part channel number: Major number-Minor number One part channel number: In case of using one part channel number, minor channel does not need. Data3,Data4 :Minor Channel Number Not needed for NTSC Data3 :High byte Data4 :Low Byte Data5 :Attribute 7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel Use No Use 4 Reserved X X 3 0 0 2 0 0 1 0 0 0 0 1
Example) 1. Analog channel:NTSC cable,channel number(35),main picture Command:ma oo 23 xx xx xx xx 01 attribute(0x01):main picture,two part(it's not mandatory), using physical channel, NTSC cable xx' data: don't care major and minor channel number in case analog channel tuning. Acknowledgement [a ][][Set ID ][][OK ][Data0][Data1] [Data2 ][Data3 ][Data4 ][Data5 ][x ][a] [ ][Set ID ][ ][NG ][Data0 ][x ] 22. Channel Add/Del(Command: m b)
116
APPENDIX
01 : Channel Add
23. K e y (Command: m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data: Key code - Refer to page 109. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
24. Input select (Command: x b) (Main Picture Input) To select input source for TV Transmission [x][b][ ][Set ID][ ][Data][Cr] Data: Structure MSB 0 0 0 0 0 0 0 LSB 0
0 0
1 1
0
1
0 0 0
1
0
1
Input Number 0 0 0 0 0 0 0 0 0 0
1 1
0
1
0
1
APPENDIX
117
The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service.
MODEL SERIAL
MANUAL DE USUARIO
TELEVISOR PLASMA
Lea atentamente este manual antes de poner en marcha su equipo y gurdelo para futuras consultas.
42PJ250R 50PJ250R 42PJ260R 50PJ260R 42PJ350R 50PJ350R 50PK550R 60PK550R
www.lg.com
ADVERTENCIA /PRECAUCIN
ADVERTENCIA PRECAUCION
RIESGO DE CHOQUE ELECTRICO NO ABRIR
PARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA NO RETIRE LA CUBIERTA NI LA PARTE POSTERIOR DE ESTE APARATO.
El smbolo de descarga dentro del triangulo equiltero, seala al usuario la presencia de voltaje peligroso sin aislamiento en el interior del aparato de tal intensidad que podra presentar riesgo de descarga elctrica.
El smbolo de admiracin dentro del triangulo equiltero, indica al usuario que el manual que acompaa a este aparato contiene instrucciones referentes a su funcionamiento y mantenimiento.
ADVERTENCIA/PRECAUCION
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA ELECTRICA, NO EXPONGA EL TELEVISOR A LA LLUVIA O HUMEDAD.
Proteja el cable de alimentacin para que no lo pisen ni aplasten, especialmente en las clavijas, las tomas y el punto de salida del aparato.
7 2
Lmpielo slo con un pao seco.
8 3
No bloquee las aberturas de ventilacin. Instale siguiendo las instrucciones del fabricante.
Utilcelo slo con el estante fijo o con ruedas, trpode, soporte o mesa especificados por el fabricante o con el accesorio suministrado con el aparato. Si utiliza un carrito, tenga cuidado al moverlo junto con el aparato para evitar lesiones en caso de que ste se caiga.
No lo coloque cerca de fuentes de calor, como radiadores, rejillas de aire caliente, estufas u otros aparatos (incluidos los amplificadores) que emitan calor.
Desenchufe este producto en caso de no utilizarlo durante un largo periodo de tiempo. Desenchufe este equipo durante tormentas con aparato elctrico o si no piensa usarlo durante largos perodos de tiempo.
No pase por alto el propsito de seguridad del enchufe polarizado o tipo toma tierra. Un enchufe polarizado tiene dos clavijas, una ms ancha que la otra. Un enchufe tipo toma a tierra tiene dos clavijas y un tercer diente de toma a tierra. La clavija ancha o el tercer diente se incorporan para su seguridad. Si el enchufe suministrado no encaja en la toma, pngase en contacto con un electricista para que sustituya la toma obsoleta.
10
Slo el personal calificado puede encargarse del servicio tcnico. La asistencia tcnica es necesaria si el aparato presenta algn dao, como por ejemplo, si el cable o la clavija de alimentacin estn daados, si se derrama lquido o se introducen objetos dentro del aparato, si el aparato ha estado expuesto a la lluvia o humedad, si no opera correctamente o si se ha cado.
15
ADVERTENCIA - A fin de reducir el riesgo de incendio o choque elctrico, no exponga este aparato a la lluvia, humedad u otros lquidos. No toque la TV con las manos mojadas. No instale este producto cerca de objetos inflamables como gasolina o velas, ni exponga la TV al flujo directo de aparatos de aire acondicionado.
13 14
16
No exponga este aparato a goteos o salpicaduras, ni coloque sobre l objetos que contengan lquidos, como floreros, tazas, etc. (por ejemplo en estantes sobre la unidad).
17
TOMA A TIERRA Asegrese de conectar el cable de toma a tierra para evitar posibles descargas elctricas. (es decir, que una TV con un enchufe de tres polos, debe conectarse a una toma de pared con tres polos). Si no es posible la puesta a tierra, contacte con un electricista calificado para que instale un interruptor automtico independiente. No intente conectar la unidad a tierra mediante cables telefnicos, pararrayos o tuberas de gas.
Power Supply Short-circuit Breaker
18
DESCONEXIN DE LA ALIMENTACIN Link-Loader recibe alimentacin si el cable de alimentacin est conectado. Desenchufe el cable de alimentacin del tomacorriente de CA para eliminar la alimentacin. Mientras esta unidad est conectada a un tomacorriente de CA, no se desconectar de dicha fuente aunque apague la unidad mediante el INTERRUPTOR DE PRENDIDO.
19
20
Limpieza Antes de iniciar labores de limpieza, desenchufe el cable de alimentacin y limpie cuidadosamente la unidad con un pao suave para evitar araazos superficiales. No roce directamente agua vaporizada u otros lquidos sobre la TV para evitar posibles choques elctricos. No limpie la unidad con productos qumicos como alcoholes, disolventes o benceno. Transporte Asegrese de que el producto est apagado, desenchufado y que todos los cables hayan sido desconectados. Harn falta dos o ms personas para transportar TVs de gran tamao. No someta el panel frontal de la TV a presiones o esfuerzos excesivos. Ventilacin Instale su TV en un lugar que disponga de ventilacin apropiada. No la instale en espacios cerrados como, por ejemplo, una estantera. No cubra el producto con paos u otros materiales, como plsticos, mientras est enchufada. No instale la unidad en lugares con exceso de polvo. Si percibe olor a quemado o de cualquier otro tipo, o detecta sonidos extraos procedentes de su TV, desenchufe el cable de alimentacin y contacte con el servicio tcnico autorizado. No presione en exceso el panel con sus manos u objetos afilados, como tornillos, lpices o bolgrafos, y evite rayarlo.
21
22
23
24
25
CONTENIDO
ADVERTENCIA /PRECAUCIN . . . . . . . . . . . . . 2 INSTRUCCIONES IMPORTANTES DE LA SEGURIDAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FUNCIONES DE ESTE TV . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREPARACIN
Accesorios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Informacin del panel frontal . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Informacin del panel posterior . . . . . . . . . . . . . . . . . . . . . . 12 Instrucciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Montaje para la pared VESA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Disposicin de cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Instalacin de un Pedestal de Escritorio . . . . . . . . . . . . 1 8 Soporte del eslabon giratorio . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 Fijacin de la TV a la pared para evitar que se caiga cuando est instalada sobre un soporte tipo pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Conexin de la Antena o cable . . . . . . . . . . . . . . . . . . . . . . . . . 20 Lista de entradas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Etiqueta de entrada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Lista de Canales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Configuracin de los canales favoritos . . . . . . . . . . . . . . 52 Lista de favoritos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Modo AV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Bloqueo de Teclas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
USB
Modos de Entrada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Lista de Fotos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Lista de Msica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Lista de Pelculas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Cdigo de registro del DivX . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Desactivacin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
CONTROL DE IMAGEN
Tamao de la Imagen (Control de Relacion de aspecto) 78 Ajustes de la Imagen Prestablecida (Modo imagen) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 Control Manual de Imagen (Modo usuario) . . . . . . 81 Tecnologa de Mejora de la Imagen . . . . . . . . . . . . . . . . .82 Ahorro de energa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Restablecimiento de la imagen . . . . . . . . . . . . . . . . . . . . . . . . 85 Minimizacin de imagen fantasma . . . . . . . . . . . . . . . . . . . 86 modo Demo. (Modo de demostracin) . . . . . . . . . . . . 87 Configuracin Inicial (Restablecer ajustes de fbrica) . . . . . . . . . . . . . . . . . . . . . . . 88
CONFIGURACIN HORARIA
Programacion del reloj - Ajuste del reloj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Ajustes de Encendido / Apagado del temporizador . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 Configuracin del temporizador de apagado automtico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
APNDICE
Lista de verificacin de problemas . . . . . . . . . . . . . . . . . 103 Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Especificaciones del producto . . . . . . . . . . . . . . . . . . . . . . .106 Cdigos de IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 Configuracin de dispositivo externo del control . . .1 10
FUNCIONES DE ESTE TV
DivX Certified to play DivX video, including premium content Pat. 7,295,673; 7,460,688;7,519,274
INFORMACIN IMPORTANTE PARA EVITAR EL EFECTO DEGRADACIN DE LA IMAGEN POR SOBRE EXPOSICIN / QUEMADO EN LA PANTALLA DE SU TELEVISOR
Al visualizar una imagen fija (Ej.: logotipos, mens de pantalla, videojuegos e imgenes procedentes de computadoras) en el televisor durante un perodo de tiempo prolongado, dicha imagen puede quedar impresa permanentemente sobre la pantalla. Este fenmeno se conoce como degradacin de la imagen por sobreexposicin o "quemado. Problema que no est cubierto por la garanta del fabricante. A fin de evitar la degradacin de la imagen por sobreexposicin, no permita la visualizacin de imgenes fijas en su pantalla durante un perodo de tiempo prolongado (2 horas o ms para una pantalla LCD, 1 hora o ms para pantallas de plasma). El efecto de degradacin de imagen por sobreexposicin tambin puede producirse en las zonas de bandas del formato letterbox (apaisado) de su televisor si usa el ajuste de formato de pantalla en 4:3 durante un perodo de tiempo prolongado.
PREPARACIN
ACCESORIOS
Asegurese de que los siguientes accesorios estn incluidos con su TV. Si algn accesorio no est incluido, favor de contactar al distribuidor del producto en el lugar donde realiz la compra. Los accesorios que se incluyen pueden ser diferentes a los de las imgenes a continuacin.
POW ER ENE RG SAV ING Y AV MO DE INP UT ENE POW ER
PREPARACIN
1 4 7
LI ST
2 5 3 6 9
Q.VIE W
TV
SAV ING
RG Y AV MO DE INP UT
8 0
1 4 7
LI ST
2 5 3 6 9
Q.VIE W
TV
VO
ME NU
L
MU TE
FA V RA TI O
8 0
CL VO EA IC R E ll
CH
E
A G
VO
ME NU
L
MU TE
Q.
ME
EN
NU
RA TI
FA V O
1.5V 1.5V
TE
CH
E
BA CK
Q.
EX IT
A G
EN
BA CK
ME
NU
TE R
FRE EZE
EX
IT
o Manual de Usuario
M4x28 M5x14
FRE EZE
Control Remoto
Cable de Alimentacin
x4
x3
(Esta caracterstica no se encuentra disponible para todos los modelos.) * Solo limpie las manchas exteriores con un pao. * No limpie con demasiada fuerza para intentar quitar las manchas. Tenga cuidado, ya que si limpia con demasiada fuerza podra rayar o decolorar la superficie.
Pao de limpieza
TV
Ncleo de ferrita
(Gris) (Este Accesorioesta disponible solo para modelos 42PJ***) Enchufe El ncleo de ferrita se puede utilizar para re-ducir las ondas electromagnticas en el cable de RF del ordenador. Entre mas cerca este localizado el ncleo de ferrita de la ANTENNA IN, sera mejor.
Sujetador de cables
Ncleo de ferrita
(Gris) (Esta caracterstica no se encuentra disponible para todos los modelos.)
El ncleo de ferrita se puede utilizar para reducir las ondas electromagnticas en el cable de audio del ordenador. Enrolle dos veces el cable de audio del ordenador al ncleo de ferrita y despus, conecte los cables a la TV como indica la imagen siguiente.
AUDIO IN (RGB/DVI)
El ncleo de ferrita puede usarse para reducir la onda electromagNcleo de ferrita ntica al conectar el cable de alimentacin. (Negro) Cuanto ms cerca est el ncleo (Esta caracterstica no se de ferrita del tomacorriente, encuentra disponible mejor ser el resultado. para todos los modelos.)
PREPARACIN
CONTROLES DEL PANEL FRONTAL
42/50PJ250R
10
PREPARACIN
ENTER
Sensor de Control Remoto Sensor inteligente Ajusta la imagen segn las condiciones del entorno. Indicador de Encendido/Stand by Se ilumina en rojo en el modo de espera. El LED est apagado mientras el televisor permanece prendido.
VOL
CH
ENTER
VOL
CH
ENTER
Botn POWER Botn INPUT Botn MENU Botn ENTER
VOL
Botones de VOLUMEN (-, +)
CH
Botones de CANAL (E,D)
Puede encender el televisor con slo pulsar el botn ligeramente con el dedo.
CUIDADO
G G
No pise en el soporte de vidrio o lo someta a algn tipo de impacto. Se puede romper, causando posibles lesiones a partir de fragmentos de vidrio, o el televisor puede caerse. No arrastrar la TV. El suelo o el producto puede daarse.
42/50PJ350R
PREPARACIN
Sensor inteligente Ajusta la imagen segn las condiciones del entorno. Indicador de Encendido/Stand by Se ilumina en rojo en el modo de espera. El LED est apagado mientras el televisor permanece prendido.
ENTER
VOL
CH
ENTER
Botn POWER Botn INPUT Botn MENU Botn ENTER
VOL
Botones de VOLUMEN (-, +)
CH
Botones de CANAL (E,D)
Puede encender el televisor con slo pulsar el botn ligeramente con el dedo.
CH
50/60PK550R
Sensor inteligente Ajusta la imagen segn las condiciones del entorno. Indicador de Encendido/Stand by Se ilumina en rojo en el modo de espera. El LED est apagado mientras el televisor permanece prendido.
ENTER
VOL
CH
ENTER
Botn POWER Botn INPUT Botn MENU Botn ENTER
VOL
Botones de VOLUMEN (-, +)
CH
Botones de CANAL (E,D)
Puede encender el televisor con slo pulsar el botn ligeramente con el dedo.
ENTER
VOL
11
IN1
- AUDIO - (Mono)
VIDEO
AV
IN1
AV
R AUDIO L(MONO) VARIABLE AUDIO OUT VIDEO
VIDEO
R
R AUDIO L(MONO) VARIABLE AUDIO OUT VIDEO
AUDIO
VIDEO
R
AUDIO VIDEO
R
1
PR
PB
R 2
PR
PB
COMPONENT IN
COMPONENT IN
AV IN 2
AV IN 2
R HDMI IN 3
HDMI IN 2
VIDEO
PREPARACIN
12
PREPARACIN
For 42/50PJ250R
HDMI IN
HDMI/DVI IN
HDMI IN 1
RGB IN(PC)
AUDIO IN (RGB/DVI)
RS-232C IN (CONTROL&SERVICE)
RS-232C IN
(CONTROL&SERVICE)
2 9 2 3 3 4 8 4 5 5 6
ANTENNA IN
ANTENNA IN
SERVICE ONLY
3 7
PREPARACIN
HDMI/DVI IN Conexin digital. Compatible con video HD y audio digital. Acepta video DVI con un adaptador o un cable de HDMI a DVI (no incluido) RS-232C IN (CONTROL & SERVICE) PORT Utilizado por otros fabricantes. AV (Audio/Video) IN Conexin anloga compuesta. Compatible solo con una definicin de video estndar (480entrelazado). VARIABLE AUDIO OUT Salida de audio analgico para su uso con amplificadores y sistemas de cine en casa. COMPONENT IN Conexin anloga. Compatible con SD/HD. Utiliza un cable rojo, verde y azul para video y uno rojo y blanco para audio. ANTENNA IN Conecte las seales de la transmisin a este puerto. Conecte los cables de seal a este conector. USB IN(Excepto 42/50PJ250R) Utilizado para la foto, la msica y la pelcula. USB IN SERVICE ONLY (Para 42/50PJ250R) Utilizado para la actualizacin de software. Socket del Cordn de Alimentacin Esta TV funciona con alimentacin de corriente alterna (ca) Cuidado: Nunca aplique voltaje de corriente continua (cc) a esta TV. RGB (PC) (Excepto 42/50PJ250R) Conexin anloga a la PC. Utilice un cable D-sub de 15 pins (cable VGA). AUDIO IN (RGB/DVI) (Excepto 42/50PJ250R) Enchufe de auriculares 1/8"(0,32 cm) para la entrada de audio anloga de la PC.
13
PREPARACIN
INSTRUCCIONES
Coloque con cuidado la pantalla de la TV sobre una superficie acolchada que la proteja de posibles daos.
Coloque las piezas del soporte sobre la base de apoyo del televisor.
Soporte de apoyo
Ajuste firmemente los 4 pernos en los huecos de la parte posterior de la TV. x4 M4x28
! N OTA
G G
Al instalar el soporte, asegrese de distinguir y montar correctamente las partes delanteras y traseras del mismo. Al realizar un montaje de sobremesa, compruebe que los pernos estn apretados correctamente. (De no ser as, el producto podra inclinarse hacia delante tras su instalacin). Si, por el contrario, apretara el perno en exceso, podra deformarse por abrasin en el rea de apriete del mismo. No sobreapriete los tornillos.
14
SEPARACIN
PREPARACIN
Coloque con cuidado la pantalla de la TV sobre una superficie acolchada que la proteja de posibles daos.
(60PK550R)
x4 M4x28
x4 M4x30
CUBIERTA DE PROTECCIN
(Fijar una gua para los exteriores.)
CUBIERTA DE PROTECCIN
Tras extraer el soporte, instale la C U B I E R T A D E P R O T E C C I N incluida sobre el hueco dejado por este. Inserte la C U B I E R T A D E P R O T E C C I N en el televisor hasta que escuche un sonido de chasquido.
15
PREPARACIN
MONTAJE PARA LA PARED VESA
Realice la instalacin mural sobre una pared slida, perpendicular al suelo. Al montar sobre otros materiales de construccin, por favor, consulte a su distribuidor ms cercano. En instalaciones del techo o sobre paredes inclinadas, la unidad puede caer y provocar graves daos personales. Le recomendamos que utilice un soporte de montaje de pared de la marca LG, cuando ud. ponga la TV en la pared. LG recomienda que el montaje de pared lo realice un instalador profesional calificado. VESA (A * B) Modelos
A B
16
PREPARACIN
Tornillo estndar
Cantidad
Soporte para instalacin en pared (de venta por separado) Wall Mounting bracket (sold separately)
400 * 400
M6
AW-50PG60MS
AW-50PG60M
60PK550R
600 * 400
M8
4 AW-60PG60MS
! N OTA
G
G G
La longitud de los tornillos necesarios vara en funcin de la pared en la que se realice el montaje. Para obtener ms informacin, consulte las instrucciones incluidas con el equipo de montaje. Las dimensiones estndar para el equipo de montaje mural se muestran en la tabla. Al adquirir nuestro equipo de montaje mural, le ser suministrado un manual de instrucciones detallado y todas las piezas necesarias para la instalacin. No utilice tornillos ms largos que los de dimensin estndar mostrados, ya que podra daar el interior de la TV. Para montajes murales que no cumplan con las especificaciones para tornillos del estndar VESA,
la longitud de estos puede diferir dependiendo de sus especificaciones. No utilice tornillos que no cumplan con las especificaciones relativas a los mismos del estndar VESA. No apriete los tornillos en exceso, ya que podra daar la TV o provocar que cayera provocando daos personales. LG no se hace responsable de este tipo de accidentes. LG no se hace responsable por los daos ocasionados en la TV o las lesiones personales producidas cuando no se utilice un equipo de montaje que cumpla con el estndar VESA o se monte sobre un muro que no haya sido especificado o si el cliente no sigue las instrucciones de instalacin de la TV.
CUIDADO
No instale el soporte de montaje en pared mientras el televisor est encendido. Eso podra provocar lesiones personales por choques elctricos.
DISPOSICIN DE CABLES
La imagen puede ser diferente a la de su televisor. Tras conectar los cables como resulte necesario, instale el S U J E T A C A B L E S y una los cables como se muestra. Para conectar un equipo adicional, vea la seccin de CONEXIONES DE EQUIPO EXTERNO.
PREPARACIN
SUJETACABLES
17
PREPARACIN
INSTALACIN DE UN PEDESTAL DE ESCRITORIO
La imagen puede ser diferente a la de su televisor. Para conseguir una ventilacin adecuada, deje un espacio de 10,1 cm de separacin entre la pared y los costados del televisor.
10,1 cm 10,1 cm 10,1 cm 10,1 cm
18
PREPARACIN
CUIDADO
G G
Asegure la ventilacin adecuada dejando el espacio recomendado. No instale la unidad prxima o sobre ninguna fuente de calor.
FIJACIN DE LA TV A LA PARED PARA EVITAR QUE SE CAIGA CUANDO EST INSTALADA SOBRE UN SOPORTE TIPO PEDESTAL
PREPARACIN
Debe adquirir los componentes necesarios para prevenir la cada de la TV de su soporte. La imagen puede ser diferente a la de su televisor. Instalelo cerca de la pared as el producto no se cae cuando est presionado hacia atrs. Las instrucciones mostradas a continuacin son ms seguras para instalar el producto en la pared as no se caer cuando el producto est presionado hacia enfrente. Esto proteger el producto y la gente de la caida hacia enfrente. Tambin prevendr el producto del dao causado por la caida. Cuidado:Favor de estar seguro de que los nios no se suban ni se cuelguen del producto.
Use los soportes y los pernos para fijar el producto en la pared como se muestra. * Si el producto tiene los pernos en el lugar de los pernos de ojo antes de insertar estos ltimos, afloje los pernos. Asegrese de los soportes con los pernos (De venta por separado) en la pared que estn ajustados firmemente. Para usar el producto seguramente asegrese de que la altura de los soportes montados en la pared sea la misma que la del producto. Asegrese de que los pernos de ojo o soportes estn apretados en forma segura.
Use un cordn fuerte (De venta por separado) para ajustar el producto. Es ms seguro usar un cordn, as se quedar horizontalmente entre la pared y el producto.
! N OTA
G G
Utilice una plataforma o armario suficientemente fuerte y grande para soportar el tamao y el peso de la TV. Para utilizar la TV con seguridad, asegrese que la altura los soportes estn a la misma altura en la pared y en el aparato de televisin.
19
PREPARACIN
Para prevenir daos, no conecte a la corriente hasta que estn instaladas todas las conexiones entre los dispositivos.
En reas de seal deficiente,puede obtener una mejor calidad en la imagen si instala un amplificador de seal. Si est siendo utilizando una antena para dos unidades, use un divisor de seal para conectarse. El cable y el convertidor de antena no son proporcionados con el producto.
2. Cable
ANTENNA IN
20
PREPARACIN
Cable Coaxial RF (75 ohm) Casa privada (Conectar a un enchufe de pared de la antena exterior)
2
HDMI IN
Conecte las salidas de video (Y, PB, PR) del DVD a los puertos de C O M P O N E N T I N V I D E O 1* en la unidad. Haga coincidir los colores de los conectores (Y = Verde, PB = Azul, PR = Rojo). Conecte la salida de audio del decodificador digital a los puertos de C O M P O N E N T I N A U D I O 1* en la unidad.
COMPONENT IN
PB
AV
VIDEO
RGB (PC)
IN1
AUDIO
PR
1
HDMI/DVI IN
ANTEN IN
2
RS-232C IN
(CONTROL&SERVICE)
PB
PR
2. Cmo usar
Encienda el decodificador digital. (Refirase al manual de usuario del decodificador digital.) Seleccione la entrada de la fuente C o m p o n e n t 1 usando el botn I N P U T del control remoto. Si est conectado al C O M P O N E N T I N 2, seleccione la entrada de la fuente C o m p o n e n t e 2.
Y, CB/PB, CR/PR Resolucin 720x480 entrelazado 720x480 progresivo Frecuencia Horizontal(kHz) 15.73 15.75 31.47 31.50 15.625 31.25 44.96 45.00 37 .50 33.72 33.75 28.125 56.25 67 .432 67 .50 Frecuencia Vertical(Hz) 59.94 60.00 59.94 60.00 50.00 50.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00
Resoluciones compatibles Seal 480entrelazado 480progresivo 576entrelazado 576progresivo 720progresivo 1 080entrelazado 1 080progresivo Componente S S S S S S S HDMI No S No S S S S
21
HDMI IN
RGB (PC)
IN1
1
HDMI/DVI IN
AUDIO
1 2
Conecte la salida de HDMI IN del Set-top box digital al puerto de H D M I I N 1*, H D M I / D V I I N 1*, H D M I I N 2* o H D M I I N 3* en la unidad. No se necesita conexin de audio por separado. HDMI admite audio y video.
1. Cmo conectar
CONEXIONES DE EQUIPO EXTERNO
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
Conexin HDMI
AV
RS-232C IN
(CONTROL&SERVICE)
2. Cmo usar
HDMI OUTPUT
Encienda el decodificador digital. (Refirase al manual de usuario del decodificador digital.) Seleccione la entrada de la fuente HDMI1*, H D M I2* o HDMI3* usando el botn I N P U T del control remoto. HDMI-DTV Resolucin 720x480 entrelazado Frecuencia Horizontal(kHz) 15.73 15.75 31.47 31.50 15.625 31.25 44.96 45.00 37 .50 33.72 33.75 28.125 56.25 67 .432 67 .50 27 .00 33.75 Frecuencia Vertical(Hz) 59.94 60.00 59.94 60.00 50.00 50.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00 24.00 30.00
! N OTA
G
720x480 progresivo
720x576 entrelazado 720x576 progresivoa
Verifique que el cable HDMI admita la versin 1,3. Los cables HDMI que no admiten la versin 1,3 de HDMI, provocan parpadeos o no muestran la imagen en pantalla. Si este es el caso, utilice cables recientes que soporten la versin 1,3 de HDMI. El modo HDMI soporta solamente el formato de audio PCM. Si el audio esta ajustada a Dolby/ DTS/ Bitstream en algunos DVDP/ STB, asegrese de cambiar la configuracin a PCM.
1920x1080 progresivo
22
VIDEO
AUDIO IN (RGB/DVI)
AV
IN1
2. Cmo usar
1
HDMI IN
RGB (PC)
AUDIO
Encienda el decodificador digital. (Refirase al manual de usuario del decodificador digital.) Seleccione la entrada de la fuente de H D M I 1 usando el botn de I N P U T del control remoto.
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
! N OTA
G
Un cable o adaptador DVI para HDMI es requerido para esta conexin. DVI no soporta audio, es necesaria una conexin de audio separada.
DVI-DTV OUTPUT
PR
23
VIDEO
HDMI IN
RGB (PC)
IN1
AUDIO
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
PB
PR
2. Cmo usar
Encienda el reproductor de DVD, inserte un DVD. Seleccione la entrada de la fuente C o m p o n e n t 1* usando el botn I N P U T del control remoto. Si est conectado al C O M P O N E N T I N 2, seleccione la entrada de la fuente C o m p o n e n t e 2. Refirase al manual de usuario del reproductor de DVD para seguir las instrucciones.
PB B-Y Cb Pb
PR R-Y Cr Pr
Y Y Y
24
R AUDIO L(MONO)
VIDEO
Conecte las salidas de video (Y, PB, PR) del DVD a los puertos de C O M P O N E N T I N V I D E O 1* en la unidad. Haga coincidir los colores de los conectores (Y = Verde, PB = Azul, PR = Rojo).
AUDIO IN (RGB/DVI)
VIDEO
AV
PR
PB
2
HDMI IN
RGB (PC)
IN1
1
HDMI/DVI IN
AUDIO
V I D E O entre la TV y Conecte las salidas de A U D I O/V el VCR.Coincida los colores de salidas (Video = amarillo, Audio izquierdo = blanco, Audio derecho = rojo)
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
1. Cmo conectar
R AUDIO L(MONO)
VIDEO
AV
RS-232C IN
(CONTROL&SERVICE)
2. Cmo usar
Encienda el reproductor de DVD, inserte un DVD. Seleccione la entrada de la fuente A V1 o A V 2 usando el botn I N P U T del control remoto. Refirase al manual de usuario del reproductor de DVD para seguir las instrucciones.
VIDEO
AUDIO
Conexin HDMI
1. Cmo conectar
VIDEO
VID
(RGB/DVI)
2
HDMI IN
1 2
RGB (PC)
IN1
AUDIO
Conecte la salida de HDMI del DVD al puerto de H D M I I N 1*, H D M I / D V I I N 1*, H D M I I N 2* o H D M I I N 3* en la unidad. No se necesita conexin de audio por separado. HDMI admite audio y video.
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
2. Cmo usar
Seleccione la entrada de la fuente HDMI1*, H D M I2* o HDMI3* usando el botn I N P U T del control remoto. Refirase al manual de usuario del reproductor de DVD para seguir las instrucciones.
HDMI OUTPUT
PR
25
PR
1
ANTENNA IN
2
R AUDIO L(
2
HDMI IN
RGB (PC)
IN1
2. Cmo usar
Inserte una cinta de video en el VCR y presione el botn PLAY del VCR.(Vea el manual de usuario del VCR). Seleccione la entrada de la fuente A V1 o A V 2 usando el botn I N P U T del control remoto. Si est conectado a la entrada A V I N 2 seleccione la fuente de entrada del A V 2 en el televisor.
1
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
ANT IN
S-VIDEO
VIDEO
! N OTA
G
26
VIDEO
ANT OUT
S-VIDEO
VIDEO
ANT IN
OUTPUT SWITCH
2. Cmo usar
2
Wall Jack
Ponga el interruptor de salida del VCR en 3 4 y luego sintonice el televisor en el mismo nmero de canal. Inserte una cinta de video en el VCR y presione el botn AUDIO PLAY del VCR. (Vea el manual de usuario del VCR).
Antenna
AV
Grabadora de video
1. Cmo conectar
1
VIDEO Conecte los puertos de AUDIO/V entre la TV y un equipo externo. Coincida los colores de puertos (Video = amarillo, Audio izquierdo = blanco, Audio derecho = rojo)
SERVICE ONLY
VIDEO
Seleccione la fuente de entrada del A V 2 en el televisor con el botn de I N P U T en el control remoto. Si est conectado a la entrada A V I N 1* seleccione la fuente de entrada del A V 1* en el televisor Opere el equipo externo correspondiente. Refirase a la gua de la operacin de equipo externo.
HDMI IN 2
2. Cmo usar
AV IN 2
27
i.e)
2. Cmo usar
USB. (G p . 58)
AV IN 2
28
HDMI IN
AV
VIDEO
HDMI IN
RGB (PC)
IN1
AUDIO
1. Cmo conectar
1 2
Conecte la salida de VGA de la PC al puerto de R G B ( P C) en la unidad. Conecte las salidas de audio de la PC al puerto de A U D I O I N ( R G B / D V I) en la unidad.
PR
R 1
RS-232C IN
(CONTROL&SERVICE)
2. Cmo usar
Encienda la unidad y la PC. Seleccione la fuente de entrada del R G B en el televisor con el botn de I N P U T en el control remoto.
RGB OUTPUT
AUDIO
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
AV
L
1. Cmo conectar
IN1
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
2. Cmo usar
Encienda la PC y la unidad. Seleccione la fuente de entrada del HDMI1 en el televisor con el botn de I N P U T en el control remoto.
DVI OUTPUT
AUDIO
HDMI IN
RGB (PC)
AUDIO
PR
PB
29
Evite mantener una imagen fija en pantalla durante largos periodos de tiempo. La imagen fija podra grabarse permanentemente en pantalla. Las formas de la entrada de sincronizacin para la frecuencia horizontal y vertical estn separadas. Segn la tarjeta de grficos que posea, algunas resoluciones podran no posicionarse adecuadamente en la pantalla.
30
Dependiendo de la tarjeta grfica, el modo DOS puede no funcionar si utiliza un cable HDMI a DVI. En el modo PC, podra verse ruido asociado con la resolucin, un diseo vertical, contraste o brillo. Si observa ruidos, cambie la salida de la PC a otra resolucin, cambie la tasa de actualizacin a otra tasa o ajuste el brillo y el contraste en el men de IMAGEN hasta que la imagen se vea clara.
IMAGEN
Brillo Nitidez Color Tinte Color Temperature Control Avanzado
E
Pantalla
Mover Ingresar
Mover
Prev.
Resolucin 50 70 70 0 0
W C
1
MENU
Seleccione I M A G E N.
2
ENTER
Seleccione P a n t a l l a.
3ENTER 4
ENTER
Seleccione R e s o l u c i n.
5 ENTER
31
Auto configuracin
Ajusta automticamente la posicin de la imagen y minimiza la inestabilidad de la imagen. Luego del ajuste, si la imagen an no es adecuada, intente usar los ajustes manuales o una resolucin diferente o actualice la tasa de la PC.
1 2
MENU
Seleccione I M A G E N. Si la posicin de la imagen an no est correcta, intente otra vez el ajuste automtico. Si la imagen debe ajustarse nuevamente luego del auto ajuste en RGB, puede ajustar la P o s i c i n, el T a m a o, o la F a s e.
ENTER
Seleccione P a n t a l l a.
3
ENTER
Seleccione A u t o c o n f i g ..
4
ENTER
Seleccione S .
5
ENTER
32
IMAGEN
Pantalla
Mover Ingresar
Mover
Prev.
Resolucin 50 70 70 0 0
W C
IMAGEN
Brillo Nitidez Color Tinte Color Temperature Control Avanzado
E
Mover
Ingresar
Pantalla
Resolucin Auto config. Posicin
G
Mover
Prev.
50 70 70 0 0
W C F
Tamao
E
Fase Restablecer
1
MENU
Seleccione I M A G E N.
2
ENTER
Seleccione P a n t a l l a.
3
ENTER
Seleccione P o s i c i n, T a m a o o F a s e.
4
ENTER
P o s i c i n: Esta funcin es para ajustar la imagen a la izquierda/derecha y arriba/ abajo a su preferencia. Tamao: Esta funcin es para minimizar cualquier barra vertical o rayas visibles en el fondo de pantalla. Y tambin cambiar el tamao de pantalla. F a s e : Esta funcin le deja remover cualquier ruido horizontal y hace clara o nitida la imagen de caracteres.
5
ENTER
33
1 2
MENU
Seleccione I M A G E N.
ENTER
Seleccione P a n t a l l a.
3
ENTER
Seleccione R e s t a b l e c e r.
4
ENTER
Seleccione S .
5
ENTER
34
Pantalla
IMAGEN
Mover Ingresar
Mover
Prev.
50 70 70 0 0
W C
Para ajustar
Si
No
1. Cmo conectar
VIDEO
DIO IN B/DVI)
AV
L
1 2
Conecte la Salida de Audio a los conectores VARIABLE AUDIO OUT del televisor.
PC)
IN1
PR
AUDIO
ANTENNA IN
2
Ajuste sus altoparlantes a travs su amplificador analgico estreo, segn las instrucciones incluidas con el amplificador.
C IN
RVICE)
! N OTA
G
Cuando conecte equipos de audio externos, como amplificadores o bocinas, puede apagar los altoparlantes del televisor desde el men. (G p . 9 5)
AUDIO
35
POWER Prende el televisor desde el modo de espera o lo apaga ponindolo en dicho modo. ENERGY SAVING Ajusta la funcin Ahorro de energa. AV MODE Conmuta entre modos preestablecidos de video y audio. p.54 INPUT Alterna entre las entradas. Tambin prende el televisor desde el modo de espera. TV Selecciona los modos de operacin remoto: TV
G
POWER
36
ENERGY
AV MODE
INPUT
TV
SAVING
1
G p.49
2 5 8 0
FAV RATIO MUTE
3 6 9
Q.VIEW
4 7
LIST
Botones NUMRICOS 0-9 Seleccione un canal. Selecciona elementos numerados en un men. LIST Muestra la lista de canales. Q.VIEW Regresa al ltimo canal visto.
VOL
CH
P A G E
MENU
Q.MENU
Controla los dispositivos compatibles con la funcin SIMPLINK. Congela el fotograma actualmente en pantalla.
BACK EXIT
FREEZE
VOLUMEN Ajusta el volumen. SUBIR/BAJAR FAV Se desplaza a travs de los canales programados favoritos. RATIO Cambia la relacin de aspecto del video. MUTE Enciende y apaga el sonido. p.41 G CANAL ARRIBA/ABAJO Cambia el canal. PAGINA ARRIBA/ABAJO Se mueve de un conjunto de informacin en pantalla al siguiente. THUMBSTICK (Botones de flechas) Navega por los mens en pantalla y ajusta la configuracin del sistema a su gusto.
(Arriba/Abajo/Iz quierda/Derecha /ENTER)
G
p.52
MENU
Muestra el men principal o cierra todas las visualizaciones en pantalla y regresa al visionado del televisor.
X STUDIO Selecciona la lista de fotografas/Msica/Pelculas. .MENU Abre la lista de opciones del men rpido. BACK Permite al usuario desplazarse un paso hacia atrs en una aplicacin interactiva o en otras funciones interactivas. EXIT Borra todas las pantallas mostradas y vuelve a la visualizacin de TV desde cualquier men. SIMPLINK Consulte una lista de dispositivos AV conectados al televisor. Al alternar este botn, aparece el men SimpLink en la pantalla.
Abra la tapa del compartimiento de las bateras en la parte posterior e instale las bateras con la polaridad correcta. Instale dos bateras de 1,5 V tipo AAA. No mezcle las bateras nuevas con las usadas. Cierre la tapa.
37
42/50PJ250R
POWER Prende el televisor desde el modo de espera o lo apaga ponindolo en dicho modo.
POWER
38
ENERGY SAVING Ajusta la funcin Ahorro de energa. AV MODE Conmuta entre modos preestablecidos de video y audio. p.54
G
ENERGY
AV MODE
INPUT
TV
SAVING
INPUT Alterna entre las entradas. Tambin prende el televisor desde el modo de espera. G p.49 TV Selecciona los modos de operacin remoto: TV Botones Seleccione un canal. NUMRICOS 0-9 Selecciona elementos numerados en un men. LIST Muestra la lista de canales. Q.VIEW Regresa al ltimo canal visto.
1 4 7
LIST
2 5 8 0
FAV RATIO MUTE
3 6 9
Q.VIEW
VOL
CH
P A G E
MENU
ENTER
Controla los dispositivos compatibles con la funcin SIMPLINK. FREEZE Congela el fotograma actualmente en pantalla.
BACK
EXIT
FREEZE
VOLUMEN Ajusta el volumen. SUBIR/BAJAR FAV Se desplaza a travs de los canales programados favoritos. G p.52 RATIO Cambia la relacin de aspecto del video.
MUTE Enciende y apaga el sonido. G p.41 CANAL Cambia el canal. ARRIBA/ABAJO PAGINA Se mueve de un conjunto de informacin en pantalla al siguiente. ARRIBA/ABAJO THUMBSTICK Le permite navegar a travs de los mens en la pantalla y ajustar el sistema de acuerdo a sus (Botones de flechas) preferencias. (Arriba/Abajo/Iz
quierda/Derecha /ENTER)
MENU Muestra el men principal o cierra todas las visualizaciones en pantalla y regresa al visionado del televisor. CLEAR VOICE ll Permite al usuario escuchar mejor los dilogos. Q.MENU Abre la lista de opciones del men rpido. BACK Permite al usuario desplazarse un paso hacia atrs en una aplicacin interactiva o en otras funciones interactivas. EXIT Borra todas las pantallas mostradas y vuelve a la visualizacin de TV desde cualquier men. SIMPLINK Consulte una lista de dispositivos AV conectados al televisor. Al alternar este botn, aparece el men SimpLink en la pantalla.
Abra la tapa del compartimiento de las bateras en la parte posterior e instale las bateras con la polaridad correcta. Instale dos bateras de 1,5 V tipo AAA. No mezcle las bateras nuevas con las usadas. Cierre la tapa.
39
o D ) en el TV o
Seleccione la fuente de visualizacin utilizando el botn I N P U T en el control remoto. Esta TV est programada para recordar qu estado de energa se configur por ltima vez, incluso si el cable de alimentacin se desconecta.
40
! N OTA
1 2 3
Presione el botn V O L ( + o - ) para ajustar el volumen. Si ud. quiere apagar el sonido, presione el botn M U T E. Ud. puede cancelar esta funcin presionando el botn MUTE, V O L ( + o - ) o AV MODE.
41
42
Paso1. BIENVENIDO
BIENVENIDO !
Gracias por elegir LG Demo de Tienda
Usar en Casa
Seleccione [Usar en Casa] para usar este TV en casa. Para usar esta TV en la tienda, seleccion
[Demo de Tienda].
Siguiente Previo Siguiente
1
ENTER
1 2
ENTER
Seleccione Modo U s a r e n C a s a.
Previo
Siguiente
Previo
Siguiente
1
ENTER
Iniciar la S i n t o n i z a c i n a u t o m t i c a.
1 2
ENTER
Seleccione L e n g u a j e.
Para 42/50PJ250R
Mover
Ingresara
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresara
AUDIO
Volumen automtico : Apagado Voz Clara II Balance Modo de audio : Estndar : Apagado Nivel
Mover
Ingresara
Sintonizacin automtica
Modo imagen
3 0
100 50 70 70 0
R G
50 50
CANAL
IMAGEN
AUDIO
HORA
OPCIN
ENTRADAS
HORA
Reloj Hora de Apagado Hora de Encendido
Mover
Ingresara
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresara
ENTRADAS
TV AV1 AV2 Componente 1 Componente 2 HDMI1 HDMI2
Mover
Ingresara
: Apagado : Apagado
1
MENU
2
ENTER
3
ENTER
4
EXIT
43
CANAL
Sintonizacin manual Edicin de Canales
Mover
Ingresar
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
AUDIO
Volumen automtico : Apagado Voz Clara II Balance Modo de audio : Estndar : Apagado Nivel
Mover
Ingresar
Sintonizacin automtica
Modo imagen
3 0
+ R
100 50 70 70 0
R G
44
50 50
CANAL
IMAGEN
AUDIO
HORA
OPCIN
USB
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresar
USB
Lista de fotos Lista de msica Lista de pelculas Reg. DivX Cdigo Desactivacin
Mover
Ingresar
1
MENU
2
ENTER
3
ENTER
4
EXIT
MEN RPIDO
Los mens de visualizacin en pantalla de su TV pueden diferir ligeramente de las ilustraciones mostradas en este manual. El men rpido (Men rpido) es un men destinado a las funciones que el usuario utiliza con ms frecuencia.
A s p e c t o d e p a n t a l l a: Selecciona el formato de imagen que desee. M o d o i m a g e n: Selecciona modos de imagen predeterminadas de fbrica en funcin de las condiciones de observacin. M o d o d e a u d i o: Selecciona modos de sonido predeterminados de fbrica para los diferentes tipos de programa. S u b t t u l o: Seleccione encendido o apagado.
S A P: Selecciona el sonido MTS. T e m p o r i z a d o r d e A p a g a d o: Seleccione el plazo de tiempo antes de que su TV se apague automticamente. B o r r / A g r / F a v: Seleccione el canal que desee agregar o eliminar, o agregue el canal a la lista de favoritos. U S B E x p u l s a r: Seleccione Expulsar para expulsar el dispositivo USB.
Men rpido
Aspecto de pantalla Modo imagen Modo de audio Subttulo SAP Temporizador de Apagado
CH
Excepto 42/50PJ250R
1
Q.MENU
2 3
EXIT
45
CANAL
Sintonizacin manual Edicin de Canales
Mover
Ingresar
CANAL
Sintonizacin manual Edicin de Canales
Mover
Ingresar
46
Sintonizacin automtica
Sintonizacin automtica
Inicio Cerrar
1
MENU
Seleccione C A N A L.
2
ENTER
Seleccione S i n t o n i z a c i n a u t o m t i c a.
3
ENTER
Seleccione I n i c i o.
4
ENTER
Ejecutar la S i n t o n i z a c i n a u t o m t i c a.
5
BACK
EXIT
CANAL
Sintonizacin manual Edicin de Canales
Mover
Ingresar
CANAL
Sintonizacin manual Edicin de Canales
Mover
Ingresar
Sintonizacin automtica
Sintonizacin automtica
F
TV
Agregar Cerrar
1
MENU
Seleccione C A N A L.
2
ENTER
Seleccione S i n t o n i z a c i n m a n u a l.
3
ENTER
4 5
Seleccione A g r e g a r o B o r r a r.
6
BACK
EXIT
47
Edicin de canal
Los canales en la lista de cliente se aparecen en el color negro, y los canales eliminados en la lista de cliente se aparecen en el color azul. Al omitir un nmero de canal,no podr escogerlo mediante el botn CH o durante la visualizacin del televisor. Si desea escoger el programa omitido,introduzca directamente su nmero mediante los botones NUMRICOS o escjalo en el men Edicin de canales.
48
CANAL
Sintonizacin manual Edicin de Canales
Mover
Ingresar
S11 0
TV
CATV
1 ARD 5 S 46 4 S 11 13 17 21 25 29 2 BBC1 6 C 05 4 C 52 14 18 22 26 30 4 ARD 7 C 06 11 15 19 23 27 31
Sintonizacin automtica
4 C 01 8 C 10 12 16 20 24 28
Cambio de Canal
Mover
CH
Cambio de pgina
Previo
Agregar/Borrar
1
MENU
Seleccione C A N A L.
2
ENTER
Seleccione E d i c i n d e C a n a l e s.
3
ENTER
Seleccione un canal.
4
Seleccione el canal que desee agregar o borrar.
5
BACK
EXIT
LISTA DE ENTRADAS
TV
AV1
AV2
Componente1
Componente2
INPUT
ENTER
42/50PJ250R
TV
AV1
AV2
Componente1
HDMI1
Componente2
TV
AV1
AV2
AV3
Componente
HDMI3
HDMI2
HDMI1
RGB
T V: Seleccinela para mirar estaciones de aire y cable. A V: Seleccinelo para mirar una video casetera u otro equipo externo. C o m p o n e n t e: Seleccinelos para mirar un DVD o un decodificador digital. R G B: Seleccinelo para ver la PC. H D M I: Seleccinelo para ver en dispositivos de alta definicin.
49
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo
Mover
Ingresar
OPCIN
Mover
Ingresar
Idioma del men(Language) : Espaol AV1 Etiqueta de entrada AV2 SIMPLINK : Apagado Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
50
Close
HDMI3
42/50PJ250R
Close
50/60PK550R
Seleccione O P C I N.
INPUT
2
ENTER
Seleccione la etiqueta.
3
ENTER
4
Seleccione la etiqueta.
EXIT
5
BACK
EXIT
LISTA DE CANALES
Podr examinar los programas almacenados en la memoria visualizando la lista de canales.
Lista de canales
Salir
Visualizacin de la L i s t a d e c a n a l e s.
1 2
ENTER
1
CH
2
EXIT
51
Men rpido
Aspecto de pantalla Modo imagen Modo de audio Subttulo SAP Temporizador de Apagado
CH
52
Excepto 42/50PJ250R
1
CH
P A G E
1 4 7
2 5 8 0
3 6 9
2 3 4
Q.MENU
Seleccione B o r / A g r / F a v.
Seleccione F a v o r i t o.
EXIT
LISTA DE FAVORITOS
Salir
FAV
1 2
ENTER
1
CH
2
EXIT
53
Apagado
Cine
Juego
Deporte
54
1AV MODE
C i n e en modo AV, el C i n e Si selecciona C se seleccionar para el men IMAGEN Modo imagen y para el men AUDIO Modo de audio respectivamente. A p a g a d o en modo AV, el Si selecciona A M o d o i m a g e n y el M M o d o d e a u d i o M volvern a tener el valor seleccionado anteriormente. A p a g a d o: Desactiva el MODO AV. C i n e: Optimiza video y audio para disfrutar pelculas. D e p o r t e: Optimiza video y audio para disfrutar de eventos deportivos. J u e g o: Optimiza video y audio para jugar videojuegos.
BLOQUEO DE TECLAS
El televisor se puede configurar de modo tal que se pueda usar slo con el control remoto. El objetivo de esta funcin es evitar que sea utilizado por personas no autorizadas, bloqueando los controles del panel frontal. Este televisor est programado para recordar la ltima opcin definida, incluso si apaga el televisor.
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresar
OPCIN
Etiqueta de entrada
Mover
Ingresar
Idioma del men(Language): Espaol SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
1
MENU
Seleccione O P C I N.
2
ENTER
3
ENTER
Seleccione A p a g a d o o E n c e n d i d o.
4
BACK
EXIT
En B l o q u e a d o E n c e n d i d o , si la unidad est apagada, para encender el TV, presione el botn INPUT, CH D E de la unidad o los botones de POWER, INPUT, CH o nmeros del control remoto. Con Bloqueo de Teclas Encendido se aparecer X B l o q u e o d e T e c l a s en la pantalla si cualquier botn del panel frontal ha presionado cuando mira la unidad (Excepto botn de (Encendido) ).
55
La funcin SIMPLINK le permite controlar y leer dispositivos AV conectados mediante cable HDMI sin ningn otro cable ni ajuste adicional.Este televisor podra funcionar con dispositivos compatibles con HDMI-CEC, pero slo sern completamente compatibles con dispositivos distinguidos con el logotipo . SIMPLINK puede activarse y desactivarse desde los mens de usuario.
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresara
OPCIN
Etiqueta de entrada
56
Mover
Ingresara
Idioma del men(Language): Espaol SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
1
MENU
Seleccione O P C I N.
2
ENTER
Seleccione S I M P L I N K.
3
ENTER
Seleccione A p a g a d o o E n c e n d i d o.
4
BACK
EXIT
! N OTA
Conecte la terminal HDMI/DVI IN o HDMI IN del televisor a la terminal posterior (salida HDMI) del dispositivo Simplink con el cable HDMI. G Al encender la fuente de Entrada con el botn INPUT en el control remoto, se desactivar el dispositivo SIMPLINK. G Al escoger un dispositivo que disponga de la funcin de cine en casa,la salida de sonido cambiar automticamente a los altoparlantes del sistema de cine en casa,desactivndose los del televisor. G Cuando la unidad est conectada a un sistema de cine en casa SIMPLINK, ajuste la toma Salida Variable y apague los altoparlantes del televisor para poner en funcionamiento los altoparlantes del sistema de cine en casa. En este momento, el volumen mximo de los altoparlantes del sistema de cine en casa est ajustado al volumen del televisor.
G
Funciones de SIMPLINK
R e p r o d u c c i n d i r e c t a : Luego de conectar los dispositivos AV al televisor, puede controlar directamente los dispositivos y medios de reproduccin sin ninguna configuracin adicional. S e l e c c i o n e d i s p o s i t i v o A V : Le permite seleccionar uno de los dispositivos conectados al televisor y reproducirlo. R e p r o d u c c i n d e l d i s c o : Controle los dispositivos AV conectados presionando los botones , ENTER, G, A, l l, FF y GG. A p a g u e t o d o s l o s d i s p o s i t i v o s : Para que est funcin aplique, todos los dispositivos conectados al televisor deben de estar detenidos. D e s c o n e c t e e l a u d i o : Ofrece una forma fcil de desactivar el audio. S y n c P o w e r o n : Cuando reproduzca el dispositivo AV conectado, el televisor se encender automticamente. (Un dispositivo, el cual se conecta al televisor a travs del cable HDMI pero no es compatible con Simplink, no proporciona esta funcin) Nota: Para activar el enlace simple, debe emplear el cable HDMI con el dispositivo *CEC. (*CEC: Consumer Electronics Control).
1
Visualizar el men SIMPLINK.
2
ENTER
3
ENTER
Men Simplink
1
V i s u a l i z a c i n d e l t e l e v i s o r: Cambie al canal del televisor anterior, sin importar el modo actual. Reproduccin de DISC (Disco): Seleccione y reproduzca los discos. Cuando existan varios discos disponibles, los ttulos de los discos aparecern en la parte inferior de la pantalla. R e p r o d u c c i n d e V C R: Reproduzca y controle el VCR conectado. R e p r o d u c c i n d e g r a b a c i o n e s H D D: Reproduzca y controle las grabaciones almacenadas en HDD. Salida de audio a bocina HT/ Salida d e a u d i o a t e l e v i s o r: Seleccione parlante HT o parlante TV para salida de audio.
1 2
G
3
4 5
G G
Cuando no hay un dispositivo conectado (aparece en gris) Dispositivo seleccionado Cuando hay un dispositivo conectado (aparece en color brillante)
57
MODOS DE ENTRADA
Esta pantalla aparecer automticamente cuando conecte un dispositivo USB. POP UP MENU no se mostrar mientras est activado el OSD incluyendo el men. En el dispositivo USB, no puede agregar una nueva carpeta ni borrar la carpeta existente. El conjunto que aqu se muestra puede tener algunas diferencias con su TV.
USB IN
IN
Seleccione F O T O S, M S I C A o P E L C U L A S.
58
USB
PHOTO LIST MUSIC LIST MOVIE LIST
1
Q.MENU
Seleccione U S B E x p u l s a r.
2
ENTER
3
ENTER
! NOTA
G
Con el fn de evitar la perdida de la memoria USB, use el sujetador (Se vende por separado) para fjar la memoria USB al sujetador de conexin USB de la TV.
Sujetador de conexin USB
Entrada de USB Conexin USB (Se vende por separado) - Fije un extremo de la conexin del USB en la memoria USB y el otro extremo en el sujetador del USB.
USB
59
USB
LISTA DE FOTOS
Puede visualizar archivos .JPG de dispositivos de almacenaje USB. La visualizacin en la pantalla de su modelo puede variar levemente.
Archivo de foto compatible: *.JPG Lnea de fondo: Mx. 4800 x sin lmite
Slo puede ejecutar archivos JPG. Slo se admite la exploracin en base de JPG. (Slo SOF0, SOF1) Los archivos no compatibles se muestran en forma de imgenes.
60
USB
Componentes de la pantalla
1
MENU
2
Seleccione U S B.
ENTER ENTER
Seleccione L i s t a d e f o t o s.
3
Se desplaza a la carpeta del nivel superior. Pgina actual/Total de pginas. Nmero total de fotos en miniatura marcadas. Botones correspondientes en el control remoto.
1
2 3
LISTA DE FOTOS
Drive1 JMJ001
Pgina 1/1
Mover
Optin
CH
Cambio de pgina
MARK
Marcar
Salir
Carpeta arriba KR101 KR102 JMJ001 JMJ002 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
E
JMJ003 JMJ004
Mover
Optin
CH
Cambio de pgina
Drive1
JMJ001
Carpeta arriba KR101 KR102 JMJ001 JMJ002 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
E
1366x768, 125KB
JMJ003
Carpeta arriba
JMJ004
Mover
Optin
CH
Cambio de pgina
1 2 3 4
ENTER
ENTER
ENTER
LISTA DE FOTOS
MARK
Marcar
Salir
USB
JMJ005 Ver
Cerrar
09/10/2008
MARK
Marcar
Salir
Cuando selecciona un archivo (no una carpeta), se visualiza el men emergente. G V e r: Muestra el elemento seleccionado. G M a r c a r t o d o: Marca todas las fotos de la pantalla. G D e s m a r c a r t o d o: Cancele la seleccin de las fotos marcadas. G B o r r a r: Borra la foto seleccionada. G C e r r a r: Cierra el men emergente.
Utilice el botn C H para navegar en la pgina de fotos. Use el botn M A R K para marcar o desmarcar una foto. Cuando se marca una o ms fotos, se pueden ver las fotos en forma individual o una presentacin de las fotos marcadas. Si no se marca ninguna foto, se pueden ver todas las fotos en forma individual o todas las fotos en la carpeta, como presentacin.
61
USB
LISTA DE FOTOS
Drive1
JMJ001
Pgina 1/1
No marcado
KR103 KR104 KR105 JMJ005 JMJ006 JMJ007 JMJ008
E
Carpeta arriba KR101 KR102 JMJ001 JMJ002 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
1366x768, 125KB
JMJ003
Carpeta arriba
JMJ004
Mover
Optin
CH
Cambio de pgina
MARK
Marcar
Salir
62
USB
LISTA DE FOTOS
Drive1
JMJ001
1366x768, 125KB
JMJ003
1/17
Q.MENU
Carpeta arriba
JMJ004
Optin
Esaconder
Presentacin
MARK
BGM
Borrar
Mover
Optin
CH
Cambio de pgina
Marcar
Salir
La relacin de aspecto de una foto puede cambiar el tamao de la foto exhibida en pantalla completa.
1 2 3 4 5
ENTER
ENTER
ENTER
Seleccione V e r.
6
ENTER
Seleccione P r e s e n t a c i n, B G M, ( Girar) , B o r r a r o E s c o n d e r .
1/17
Q.MENU
Optin
Esaconder
Presentacin
BGM
Borrar
Use el botn para seleccionar la foto anterior o siguiente. Use el botn para seleccionar y controlar el men en la pantalla completa.
P r e s e n t a c i n: Las fotos seleccionadas se visualizan durante la presentacin de diapositivas. Si no se selecciona ninguna foto, todas las fotos en la carpeta actual se visualizan durante la presentacin de diapositivas. Defina el intervalo de tiempo de la presentacin en O p c i n.
USB
B G M: Escuche msica mientras ve las fotos en tamao completo. Defina el dispositivo BGM y lbum en O p c i n. ( G i r a r ): Girar fotos. G Gira la foto 90, 180, 270, 360 en el sentido de las agujas del reloj. G B o r r a r: Borre las fotos.
G G
E s c o n d e r: Oculte el men en la pantalla de tamao completo. Para ver nuevamente el men en pantalla completa, presione el botn E N T E R.
63
USB
Seleccionar opciones.
1/17
Q.MENU
Opcin
Esaconder
Presentacin
BGM
Borrar
Previo
64
USB
! N OTA
G
Si selecciona "off" para el altavoz del televisor, ajustar las caractersticas de audio en elegir las opciones no funcionan.
1 2
Q.MENU
ENTER
Veloc. de presentacin
Rpido
Carpeta de msica
Previo
1
ENTER
ENTER
Establecer vdeo.
Modo imagen Contraste Brillo Nitidez Color Matiz Temperatura de color Reduccin de ruido Restablecer Previo 100 50 70 70 0 0
R G
Vivo
Medio
USB
1
ENTER
2
ENTER
Establecer audio.
Modo de audio Volumen automtico Voz clara II Balance 0 Cine Apagado Apagado
L R
Previo
1 2
ENTER
ENTER
65
USB
LISTA DE MSICA
Puede utilizar el men de listado de msica para reproducir archivos MP3 de un dispositivo USB de almacenaje. Este televisor no puede reproducir archivos protegidos contra copia. La visualizacin en la pantalla de su modelo puede variar levemente.
Archivos de msica compatibles: *.MP3 Frecuencia de tasa binaria 32 kbps - 320 kbps Frecuencia de muestreo MPEG1 capa 3: 32 kHz - 48 kHz
2 3
Pgina actual/Total de pginas. Nmero total de msica en miniatura marcadas. Botones correspondientes en el control remoto.
1
Music
S003
Mover
Men emergente
CH
Cambio de pgina
Q.MENU
66
USB
Componentes de la pantalla
1
MENU
2
Seleccione U S B.
ENTER ENTER
Seleccione L i s t a D e M s i c a.
3
LISTA DE MSICA
Pgina 1/1
No marcado
Duracin
Optin
MARK
Marcar
Salir
LISTA DE MSICA
Music
S003
Pgina 1/1
No marcado
Ttulo Duracin
Carpeta arriba
G
Salir
Mover
Men emergente
CH
Cambio de pgina
Q.MENU
Optin
MARK
Marcar
LISTA DE MSICA
Music
S003
Pgina 1/1
No marcado
Ttulo Duracin
Carpeta arriba
03:33 Reproducir 04:45 Repr. con fotos Marcar todo 01:30 Borrar 02:37 Cerrar 01:58
1366x768 125KB
G
Optin
MARK
Mover
Men emergente
CH
Cambio de pgina
Q.MENU
Marcar
Salir
R e p r o d u c i r (Durante el modo parada): Reproduzca la msica seleccionada. Durante la reproduccin, puede seleccionar un archivo diferente para reproducir y el archivo comenzar en forma automtica. Una vez que finalice la reproduccin de msica, comenzar a reproducirse la siguiente seleccionada. Cuando ya no haya msica seleccionada para reproduccin, se reproducir la siguiente en la carpeta actual. R e p r o d u c i r M a r c a d o : Reproduzca la msica seleccionada. Cuando una cancin termina de reproducirse, la siguiente cancin seleccionada se reproducir automticamente. D e t e n e r r e p r o d . (Durante la lectura): Comience a reproducir la msica seleccionada y luego muvase a la lista de fotos. R e p r . c o n f o t o s : Comience reproduciendo la msica seleccionada y luego muvase a la lista de fotos. M a r c a r t o d o : Marque toda la msica del flder. D e s m a r c a r t o d o : Cancele la seleccin de todas las canciones. B o r r a r : Borrar la msica seleccionada. C e r r a r : Cierre el pop- up men.
USB
1 2 3 4
ENTER
ENTER
ENTER
Use el botn C H para navegar en la pgina de ttulos de msica. Use el botn M A R K para marcar o desmarcar una msica. Si no se marca ninguna msica, toda la msica en la carpeta se reproducir en secuencia. Cuando uno o ms archivos de msica estn marcados, la msica marcada se reproducir en secuencia. Si desea escuchar slo una msica repetidamente, simplemente marque esa msica y reprodzcala.
67
USB
Uso de la opcin Lista de msica
LISTA DE MSICA
Msica
S003
Establecer audio.
Modo de audio Cine Apagado Apagado 0
L R
00:00/01:34
Carpeta arriba
S004 S005
Mover
Men emergente
CH
Mover pgina
Q.MENU
Opcin
MARK
Marcar
Salir
Previo
1
USB
Q.MENU
Si no pulsa ningn botn por un tiempo, flotar una caja con informacin de la reproduccin (como se muestra a continuacin) como salvapantallas. El salvapantallas? El salvapantallas previene el dao a los pxeles de la pantalla por mantener una imagen fija en pantalla por un largo perodo de tiempo.
! NOTA
Cuando se reproduce una cancin, se visualiza frente al tiempo de reproduccin. Un archivo de msica daado o alterado muestra 00:00 como el tiempo de reproduccin. G Los archivos de msica protegidos contra copia no se reproducirn. G Pulsar el botn E N T E R, A, R E T U R N, M E N , M e n r p i d o , A T R S , S A L I R o A H O R R O D E E N E R G A para detener el protector de pantalla. G Este televisor no puede reproducir archivos de msica de menos de 32 kbytes. G Los botones P L A Y ( G) , P a u s e ( I I ) , A, GG, FF en el control remoto tambin estn disponibles en este modo. G Puede utilizar el botn GG para seleccionar la msica siguiente y el botn FF para seleccionar la msica anterior. G Si selecciona Off para TV speaker, las opciones de Set Audio en Choose Options no funcionarn.
G G
68
LISTA DE PELCULAS
La lista de videos se activar una vez detectado el USB. Se utiliza al reproducir archivos de pelculas en la TV. Muestra las pelculas en la carpeta USB y admite la reproduccin. Permite la reproduccin de todas las pelculas de la carpeta y los archivos deseados por el usuario. No est permitido editar, eliminar ni aadir. Se trata de una lista de videos que muestra informacin de la carpeta y del archivo Divx. Admite hasta cuatro unidades. Archivos de PELCULA admitidos (*.avi/*.Divx) Formato de video : MPEG1 , MPEG2, MPEG4 (No admiten Microsoft MPEG4 V2, V3), DivX 3.xx , DivX4.xx, DivX 5.xx , DivX 6.xx (Playback), DivX VOD ( DRM ) , XviD Formato de audio : Mpeg, Mp3, PCM, Dolby D Frecuencia de muestreo : entre 32 kHz - 48 kHz(MP3) Velocidad en bits : entre 32 kbps - 320 kbps(MP3) Formato de subttulos : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System) Algunos subttulos creados por usuario podran no funcionar correctamente. La informacin relativa al tiempo en un archivo de subttulos externo, debe organizarse en orden ascendente para su lectura. El archivo de vdeo y el archivo de subttulos deben estar situados en la misma carpeta. El nombre del archivo de vdeo y el archivo de subttulos debe ser el mismo para ver los subttulos n o r malmente. Si la estructura de vdeo y audio del archivo grabado no est intercalada, se emitir vdeo o audio. Al leer un video a travs de una conexin USB no compatible con transmisin de datos de alta velocidad, podra no funcionar correctamente. Los dispositivos de almacenamiento USB de versin inferior a USB 2,0 tambin son compatibles. Pero podran no funcionar correctamente en la lista de pelculas. El DivX podra no poder leerse dependiendo del tipo que sea o de los mtodos de grabacin. Si la estructura de video y audio del archivo grabado no est interpolada, se emitir o video o audio. La velocidad binaria para que un archivo de pelcula pueda ser ledo es de 4 Mb/s. Slo es posible alcanzar el FPS (fotogramas por segundo) mximo en el nivel SD. FPS es 25 FPS (720*576) 30 FPS (720*480) dependiendo de la resolucin. Los archivos de 25 FPS 30 FPS, o ms, pueden no leerse correctamente. Los archivos codificados con GMC (Global Motion Compensation) pueden no reproducirse. Algunos archivos de vdeo creados con un codificador pueden no reproducirse. El nombre del archivo de vdeo y el archivo de subttulos debe ser el mismo para ver los subttulos n o r malmente.
USB
Nombre de extensin
mpg, mpeg, mpe, vob, dat
Codec de vdeo
MPEG1, MPEG2 MPEG 4-SP, MPEG4-ASP, Divx 3.xx,Divx 4.xx, Divx 5.xx, Divx 6.xx(Playback), Xvid
Codec de audio
AC3,MPEG,MP3,PCM
Resolucin
720x576@ 25progresivo
AC3,MPEG,MP3,PCM
720x480@ 30progresivo
69
USB
Componentes de la pantalla
1
MENU
2
Seleccione U S B.
ENTER ENTER
Seleccione L i s t a d e p e l c u l a s.
Se desplaza a la carpeta del nivel superior. Nmero total de pelcula marcados Botones correspondientes en el control remoto
1
Movie
H003
H005
E
Mover
Men emergente
CH
Cambio de pgina
! NOTA
Un archivo de pelcula DivX y su archivo de subttulos deben estar ubicados en la misma carpeta. G El nombre del archivo de vdeo y el de su archivo de subttulos deben ser idnticos para poder mostrarse. / ) para desplazarse a un fotograma especfico hacia adelante o hacia atrs, mientras G Use los botones ( se lee una pelcula. (Los botones ( / ) podran no funcionar correctamente con algunos archivos mientras se lee una pelcula.)
G
70
No marcado
Duracin
USB
MARK
Marcar
Salir
LISTA DE PELCULAS
Movie
H003 Ttulo
640x480, 720KB
Carpeta arriba
Mover
Men emergente
CH
Cambio de pgina
LISTA DE PELCULAS
Movie
H003 Ttulo
E
Pgina 1/1
No marcado
Up Folder H001 H002 00:03:33 1366x768, 125KB 00:04:45 Reproducir Marcar todo 00:01:30 Borrar 00:03:13 Cerrar
E
640x480, 720KB
Carpeta arriba
Mover
Men emergente
CH
Cambio de pgina
1 2
ENTER
3 4
ENTER
ENTER
Pgina 1/1
No marcado
Duracin
G
Salir
MARK
Marcar
Duracin
00:02:51
MARK
Marcar
Salir
P l a y : Reproduce los ttulos de pelculas seleccionados. Se reproduce el DivX mientras cambia la pantalla. G R e p r . m a r c a d o s: Leer los ttulos de pelcula escogidos. Una vez finaliza la lectura de una pelcula, se iniciar automticamente la lectura de la siguiente escogida. G D e t e n e r r e p r o d . (Durante la lectura): Detener la lectura de pelculas. G M a r c a r t o d o: Marcar todos los ttulos de la carpeta. G D e s m a r c a r t o d o: Cancele la seleccin de todas las canciones. G B o r r a r: Borrar la pelcula seleccionada. G C e r r a r: Cierre el pop- up men.
USB
71
USB
Uso de la opcin Lista de pelculas
Seleccionar opciones.
Establecer reproduccin de vdeo. Establecer vdeo. Establecer audio.
Previo
Q. MENU Option
1 2
Q.MENU
ENTER
72
USB
. Lenguaje . Sinc . Ubicacin
Prev.
d e i m a g e n: Escoja el tamao original o a completo. S u b t t u l o: Los subttulos pueden activarse o desactivarse. Ante dos o ms opciones de subttulos, podr escoger uno de ellos. L G e n g u a j e d e A u d i o: Escoja el idioma deseado. Pero, no puede escogerse el archivo que slo contenga un canal de audio. S i n c: Cuando el video no est sincronizado con los subttulos, stos pueden ajustarse por unidades de 0,5 segundos. U b i c a c i n: Desplace el emplazamiento de los subttulos.
G Idioma
1
ENTER
Mostrar T a m a o d e i m a g e n, L e n g u a j e d e A u d i o, o I d i o m a s u b t i t u l o.
2
ENTER
Soporte de idioma
Francs, Espaol, Cataln Vasco, Portugus, Italiano, Albano, Reto-Romance, Holands, Alemn, Dans, Sueco, Noruego, Finlands, Feros, Islands, Irlands, Escocs, Ingls
Latino1 Latino2 Latino4 Latino5 Cirlico Griego Hebreo Chino Thai rabe
Checo, Hngaro, Polaco, Rumano, Croata, Eslovaco, Esloveno, Serbio Estonio, Idiomas Blticos Letn (Latvio) y Lituano, Groenlands y Lapn Ingls, Turco Blgaro, Bielorruso, Macedonio, Ruso, Serbio y pre-1990 (no ghe con recuperacin) Ucraniano Ingls, Griego moderno Ingls, Hebreo moderno Chino Tailands Ingls, rabe
! NOTA
Ciertos caracteres especiales no son compatibles con los subttulos. Las etiquetas HTML no son compatibles con los subttulos. G Los subttulos en idiomas diferentes a los idiomas admitidos no estn disponibles.
G G
USB
Modo imagen Contraste Brillo Nitidez Color Matiz Temperatura de color Reduccin de ruido Restablecer 100 50 70 70 0 0
Vivo
! NOTA
Medio
Previo
1
ENTER
ENTER
73
USB
Previo
1
ENTER
74
USB
2
ENTER
FF
/ GG
II
Durante la lectura, pulse el botn P a u s e ( I I ) . Se mostrar una pantalla fija. Al usar el botn indicando la posicin. durante la lectura el cursor podr visualizarse en pantalla
P L A Y ( G)
USB
Lista de fotos Lista de msica Lista de pelculas Reg. DivX DivXDivX Reg. Reg. Cdigo Code Code Desactivacin
Mover
Ingresar
Video a pedido DivX(R) Su cdigo de registro es: XXXXXXXXXX Para obtener ms informacin, visite www.divx.com/vod
Cerrar
1
MENU
USB
Seleccione U S B.
2
ENTER
Seleccione R e g . D i v X C d i g o.
3
ENTER
Visualizar el R e g . D i v X Cdigo
Pulse el botn MENU/EXIT para volver a un visionado normal del TV. Pulse el botn B A C K para volver a la pantalla de men anterior.
75
USB
! NOTA
Archivo de pelcula compatible Resolucin: inferior a 720x480 (720x576) pxeles An. x Al. Velocidad de cuadros: inferior a 30 cuadros/segundo
G
Cdec de vdeo: MPEG1, MPEG2, MPEG4 (No soporta Microsoft MPEG4-V2, V3), DivX3.xx, DivX4.xx, DivX5.xx, DivX VOD(DRM), XviD, DivX 6.xx (Reproduccin) Cuando esta cargando, algunos botones no pueden funcionar.. Si usa el cdigo de registro DivX de otro dispositivo, el archivo DivX alquilado o adquirido no podr leerse. Por lo tanto, use siempre el cdigo de registro DivX asignado a este producto.
76
USB
DESACTIVACIN
Elimine la informacin de autentificacin actual para recibir una autentificacin de usuario nueva de DivX para el televisor. Una vez ejecutada esta funcin, se requerir de nuevo una autentificacin de usuario DivX para ver archivos DRM DivX.
USB
Lista de fotos Lista de msica Lista de pelculas Reg. DivX Cdigo Deactivation Desactivacin
Mover
Ingresar
USB
Lista de fotos Lista de msica Lista de pelculas Reg. DivX Cdigo Deactivation Desactivacin
Mover
Ingresar
USB
1
MENU
Seleccione U S B.
2
ENTER
Seleccione Desactivacin.
3
ENTER
Seleccione S o N o.
4
ENTER
Pulse el botn MENU/EXIT para volver a un visionado normal del TV. Pulse el botn B A C K para volver a la pantalla de men anterior.
77
CONTROL DE IMAGEN
TAMAO DE LA IMAGEN (CONTROL DE RELACION DE ASPECTO)
Esta funcin le permite elegir de una imagen analoga una relacin de aspecto 4:3 mostrada en la TV. RGB fuente de entrada de relacin de aspecto 4:3 16:9.
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
Modo imagen
100 50 70 70 0
R
1
MENU
78
CONTROL DE IMAGEN
Seleccione I M A G E N.
2
ENTER
Seleccione A s p e c t o d e p a n t a l l a.
3
ENTER
Tambin ud. puede ajustar el A s p e c t o d e p a n t a l l a con el men M e n r p i d o. Presione el botn R A T I O repetidamente para seleccionar el formato de la imagen deseado.
4
BACK
EXIT
16:9
Seleccione cuando desea ajustar la imagen horizontalmente, en una proporcin lineal para llenar la pantalla completa.
Zoom
Seleccione cuando desea ver la imagen sin ninguna alteracin. Sin embargo, las porciones superior e inferior de la imagen sern cortadas.
Slo bsqueda
Normalmente los bordes de las seales de video quedan recortadas un 1-2%. El modo Slo bsqueda desactiva este recorte y muestra el video completo. Notas: Si hubiera ruido en los bordes de la seal original, sern visibles cuando el modo Slo bsqueda est activado. Esta funcin slo se opera en los modos de Componente/HDMI/DVI(720progresivo/1 080entrelazado/1 080progresivo) fuente de entrada.
Zoom cine 1
Seleccione Cine Zoom cuando desee ampliar la imagen en la proporcin correcta. Nota: La imagen puede verse distorsionada al ampliarla o reducirla. Botn o : Ajuste la proporcin ampliada del Zoom para cine. El rango de ajuste es de 1-16.
CONTROL DE IMAGEN
4:3
La seleccin siguiente le dejar ver una imagen con la proporcin original de aspecto 4:3.
79
CONTROL DE IMAGEN
AJUSTES DE LA IMAGEN PRESTABLECIDA (MODO IMAGEN)
Hay configuraciones predeterminadas de fbrica disponibles en los mens del usuario. Puede usar una configuracin predeterminada, cambiar cada configuracin manualmente.
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
Modo imagen
Vivid 100 50 70
Auto Power Save
Estndar
1
MENU
Seleccione I M A G E N.
2
ENTER
Seleccione M o d o i m a g e n.
3
ENTER
Seleccione V i v o, E s t n d a r, D e p o r t e o J u e g o.
, C i n e,
4
BACK
EXIT
Los ajustes V i v o, E s t n d a r, , Cine, D e p o r t e y J u e g o son preestablecidos en fbrica para lograr la mejor calidad de imagen. Tambin ud. puede ajustar el M o d o i m a g e n con el men M e n r p i d o. V i v o: Este es el modo para maximizar el efecto del video en el expositor de la tienda. Intensifica el contraste,brillo, la nitidez y color para ofrecer imgenes vivas. E s t n d a r: Este es el modo con el que se obtienen condiciones ptimas de visualizacin para el usuario general. : Este modo maximiza o reduce el consumo de energa sin afectar a la calidad de la imagen. C i n e: Este modo optimiza el video para disfrutar pelculas. D e p o r t e s: Este es el modo de video para enfatizar el video dinmico y los colores primarios(ej.:blanco,uniforme, csped,azul del cielo,etc.)obteniendo el ajuste ptimo de la pantalla para disfrutar los deportes. J u e g o: Este es el modo para obtener velocidad de respuesta rpida en una pantalla rpida de videojuego.
Auto Power Save Auto Power Save
80
CONTROL DE IMAGEN
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
Modo imagen
Contraste
80
E
50 70 70 0
R G
Ingresar
1
MENU
Seleccione I M A G E N.
2
ENTER
Seleccione M o d o i m a g e n.
3
ENTER
4
ENTER
Seleccione V i v o, E s t n d a r, D e p o r t e o J u e g o.
, C i n e,
5
ENTER
6
BACK
EXIT
C o n t r a s t e: Aumenta o disminuye el gradiente de la seal de video. (Podra usar el mando de contraste cuando las partes brillantes de la imagen queden saturadas). B r i l l o: Aumenta o disminuye el nivel de negro de la seal de video. Deber usar la funcin Brillo cuando el nivel de negro de la imagen no sea visible. N i t i d e z: Ajusta el nivel de nitidez de los bordes entre las zonas de imagen iluminadas y oscuras. Cuanto ms bajo sea el nivel, ms suave la imagen. C o l o r: Ajusta la intensidad de todos los colores. T i n t e: Ajusta el balance entre niveles de rojo y verde. T e m p e r a t u r a d e C o l o r: Ajuste en clido para mejorar los colores de gama ms clida como el rojo o en fro para dar a la imagen un tono ms azulado.
E E
CONTROL DE IMAGEN
81
CONTROL DE IMAGEN
TECNOLOGA DE MEJORA DE LA IMAGEN
Puede calibrar la pantalla para cada Modo de imagen o ajustar el valor del video de acuerdo con la pantalla especial de video. Puede ajustar un valor de video diferente para cada entrada. Para reiniciar a los ajustes preestablecidos de fbrica tras realizar ajustes para cada fuente de entrada, ejecute el R e s t a b l e c e r i m a g e n para cada Modo de imagen.
IMAGEN
Contraste Brillo Nitidez Color Tinte
E
Move
Ingresar
IMAGEN
Contraste Brillo Nitidez Color Tinte
E
Move
Ingresar
100 50 70 70 0
W C
100 50
F W
Apagado
C Apagado
Control Reduccin Avanzado de ruido Restablecer imagen Gamma Nivel Negro Modo pelcula Cerrar
82
CONTROL DE IMAGEN
42/50PJ250R
1
MENU
Seleccione I M A G E N.
2
ENTER
Seleccione C o n t r o l A v a n z a d o.
3
ENTER
4
Seleccione sus opciones deseadas.
5
BACK
EXIT
Ajuste en clido para mejorar los colores de gama ms clida como el rojo o en fro para dar a la imagen un tono ms azulado. Ajusta el contraste para mantenerlo en el nivel ptimo dependiendo del brillo de la pantalla. Mejora la imagen haciendo las partes brillantes ms brillantes y las partes obscuras ms obscuras. Ajusta los colores en pantalla para que aparezcan vivos, ricos y limpios. Esta funcin mejora el tono, saturacin e iluminacin de forma que rojos, azules, verdes y blancos parezcan ms vivos Reduce el ruido en pantalla sin afectar la calidad de video.
Gamma
Bajo : ilumina la zona de nivel oscuro y gris de la imagen. Media: graduacin rpida de la imagen original. Alto: oscurece la zona de nivel oscuro y gris de la imagen. Puede ajustar el brillo de la zona oscura y la zona del nivel de gris de la imagen.
Bajo: La reflexin de pantalla se pone ms obscura.
CONTROL DE IMAGEN
Nivel Negro
Automtico: Cuando advierta el nivel negro en la pantalla, se establecer en alto o bajo automticamente.
Ajuste el nivel de negro de la pantalla al nivel adecuado. Esta funcin permite escoger Bajo o Alto en el siguiente modo: TV, AV, HDMI o por
Hace que los videoclips grabados se vean de forma ms natural. Las pelculas en DVD y Blu-ray estn filmadas a 24 fotogramas por segundo.
83
CONTROL DE IMAGEN
AHORRO DE ENERGA
Este reduce el consumo elctrico del televisor. Puede incrementar el brillo de su pantalla ajustando el nivel A h o r r o d e E n e r g a o M o d o i m a g e n.
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
IMAGEN
Aspecto de pantalla: 16:9
Mover
Ingresar
Sensor inteligente Ahorro de energa : Sensor inteligente Modo imagen : Vivo Contraste Brillo Nitidez Color Apagado Mnimo 100 Media 50 Mximo 70 70 Desconexin de pantalla 0R
G
Modo imagen
100 50 70 70 0
R G
Tinte
E
1
MENU
Seleccione I M A G E N.
2
ENTER
Seleccione
A h o r r o d e e n e r g a.
84
CONTROL DE IMAGEN
3
ENTER
4
BACK
EXIT
S e n s o r I n t e l i g e n t e? Si esta funcin est activa, la imagen se ajusta automticamente para adecuarse lo ms posible a las condiciones del entorno. Tambin ud. puede presionar el botn de A h o r r o d e e n e r g a en el control remoto. Desconexin de Si se selecciona D p a n t a l l a, el TV se apaga luego de 3 segundos.
RESTABLECIMIENTO DE LA IMAGEN
Las configuraciones de los modos de pantalla seleccionados vuelven a las configuraciones predeterminadas de fbrica.
IMAGEN
Brillo Nitidez Color Tinte
E
Mover
Ingresar
IMAGEN
Brillo Nitidez Color Tinte
E
Mover
Ingresar
50 70 70 0 0
W C
50 70 70 0 0
W C
1
MENU
Seleccione I M A G E N.
CONTROL DE IMAGEN
2
ENTER
Seleccione R e s t a b l e c e r i m a g e n.
3
ENTER
4
EXIT
85
CONTROL DE IMAGEN
MINIMIZACIN DE IMAGEN FANTASMA
Una imagen congelada para que aparezca en pantalla durante un perodo prolongado, resultar en una imagen fantasma que permanecer incluso al cambiar de imagen. Puede utilizar Orbiter para evitar la adherencia de la imagen. Las otras dos funciones son para eliminar las imgenes fantasma.
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresar
OPCIN
Etiqueta de entrada
Mover
Ingresar
SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
: Encendido : Apagado : Apagado Normal :1 Orbiter : Normal Lavado de Color : Apagado Blanquear
1
MENU
86
CONTROL DE IMAGEN
Seleccione O P C I N.
2
ENTER
Seleccione M t o d o d e I S M.
3
ENTER
4
BACK
EXIT
N o r m a l: Si la imagen fantasma no es un problema, ISM no es necesario - Seleccione Normal. O r b i t e r: Esta funcin puede ayudar a prevenir imagenes fantasma. Sin embargo, es mejor no permitir imagenes fijas en pantalla. Para evitar que haya una imagen fija en la pantalla, la imagen se mover cada 2 minutos. L a v a d o d e C o l o r: Se muestran alternativamente el bloque de color con la pantalla desplazada ligeramente y el patrn blanco. Es difcil detectar la imagen superpuesta temporal generada durante su eliminacin y el funcionamiento del patrn de color. B l a n q u e a r: Es la funcin que remueve las imgenes permanentes de la pantalla. Use moderadamente. Mire el televisor normalmente durante un momento antes de utilizar esta funcin para ver si desaparece la imagen fantasma por s sola.
! NOTA
G
Es imposible limpiar perfectamente una imagen que ha permanecido expuesta por mucho tiempo con la funcin de L a v a d o d e C o l o r y B l a n q u e a r . Para regresar a la pantalla,presione cualquier botn.
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresar
OPCIN
Etiqueta de entrada
Mover
Ingresar
Idioma del men(Language) : Espaol SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
ENCENDIDO
APAGADO
CONTROL DE IMAGEN
1
MENU
Seleccione O P C I N.
2
ENTER
Seleccione M o d o D e m o .
3
ENTER
Seleccione E n c e n d i d o . Comenzar el M o d o D e m o.
4
EXIT
Regresar a la pantalla del televisor. Si desea detener la demostracin, pulse cualquier botn.
87
CONTROL DE IMAGEN
CONFIGURACIN INICIAL (RESTABLECER AJUSTES DE FBRICA)
Utilizar para restablecer rpidamente todas las opciones del men a sus valores de fbrica originales. Todas las caracteristicas de usuarion y de canal seran reiniciadas.
OPCIN
SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresar
OPCIN
SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
! E
Mover
Ingresar
: Encendido : Apagado : Apagado Todas las caracteristicas de usuarion y de canal :1 seran reiniciadas, desea continuar? : Normal No
1
CONTROL DE IMAGEN
MENU
Seleccione O P C I N.
2
ENTER
Seleccione C o n f i g u r a c i n I n i c i a l.
3
ENTER
Seleccione S o N o.
4
BACK
EXIT
88
AUDIO
Volumen automtico : Apagado Voz Clara II Balance Modo de audio : Estndar : Apagado Nivel
Mover
Ingresar
AUDIO
Volumen automtico : Apagado Voz Clara II : Apagado Nivel Balance Modo de audio : Estndar
Mover
Ingresar
Apagado Encendido 3 0
L + R
3 0
+ R
50 50
50 50
1
MENU
Seleccione A U D I O.
2
ENTER
Seleccione V o l u m e n a u t o m t i c o.
3
ENTER
Seleccione E n c e n d i d o o A p a g a d o.
4
BACK
89
AUDIO
Volumen automtico : Apagado Voz Clara II Balance Modo de audio : Estndar : Apagado Nivel
Move
Enter
AUDIO
Volumen automtico : Apagado Voz Clara II : Apagado Nivel Balance Modo de audio : Estndar
Move
Enter
Apagado 3 0
L + Encendido R
3 0
+ R
50 50
50 50
1
MENU
Seleccione A U D I O.
2
ENTER
Seleccione V o z C l a r a I I.
3
ENTER
Seleccione E n c e n d i d o o A p a g a d o.
90
4
ENTER
Seleccione N i v e l.
5
ENTER
6
BACK
EXIT
AUDIO
Volumen automtico : Apagado Voz Clara II Balance Modo de audio : Estndar : Apagado Nivel
Mover
Ingresar
AUDIO
Volumen automtico : Apagado Voz Clara II : Apagado Nivel Balance Modo de audio : Estndar Agudos
Mover
Ingresar
3 0
+ R
+ R
0 L Estndar
50 50
1
MENU
Seleccione A U D I O.
2
ENTER
Seleccione M o d o d e a u d i o.
3
ENTER
Seleccione E s t n d a r, M s i c a, C i n e, D e p o r t e o J u e g o.
4
BACK
Tambin ud. puede ajustar el M o d o d e a u d i o con el men M e n r p i d o. E s t n d a r: ofrece sonido de calidad estndar. M s i c a: optimiza el sonido para escuchar msica. C i n e: optimiza el sonido para disfrutar pelculas.. D e p o r t e: optimiza el sonido para disfrutar eventos deportivos. J u e g o: optimiza el sonido para jugar con videojuegos.
91
Mover
Ingresar
AUDIO
Volumen automtico : Apagado Voz Clara II : Apagado Nivel Balance Modo de audio : Estndar
Mover
Ingresar
: Apagado Nivel 3 0
L + R
3 0
+ R
50
Cerrar
1
MENU
Seleccione A U D I O.
2
ENTER
Seleccione M o d o d e a u d i o.
3
ENTER
Seleccione E s t n d a r, M s i c a, C i n e, D e p o r t e o J u e g o.
4
ENTER
Seleccione A g u d o s o G r a v e s.
5
ENTER
6
BACK
EXIT
92
50
Apagado
E
INFINITE SOUND
Escoja esta opcin para obtener un sonido realista.
Move
Enter
AUDIO
Volumen automtico : Apagado Voz Clara II : Apagado Nivel Balance Modo de audio : Estndar
Move
Enter
: Apagado Nivel 3 0
L + R
3 0
+ R
50 50
1
MENU
Off
Seleccione A U D I O.
2
ENTER
Seleccione S o n i d o i n f i n i t o.
3
ENTER
Seleccione E n c e n d i d o o A p a g a d o.
4
BACK
Si la calidad de sonido o el volumen no estn en el nivel deseado, se recomienda utilizar un sistema independiente de cine en casa o un amplificador para hacer frente a diferentes entornos de usuario.
EXIT
93
AUDIO
Volumen automtico : Apagado Voz Clara II Balance Modo de audio : Estndar : Apagado Nivel
Mover
Ingresar
AUDIO
Volumen automtico : Apagado Voz Clara II : Apagado Nivel Balance Modo de audio : Estndar
Mover
Ingresar
+ R
Cerrar
50 50
50 50
1
MENU
Seleccione A U D I O.
2
ENTER
Seleccione B a l a n c e.
3
ENTER
4
BACK
EXIT
94
0L
R 0 L Balance
DISPOSICIN DE BOCINAS DE TV
Apague los altavoces si est utilizando un equipo de audio externo. En A V, C o m p o n e n t e, R G B y H D M I con HDMI al cable DVI, el altoparlante del televisor puede estar operativo incluso sin seal de video.
AUDIO
Balance Modo de audio : Estndar
E
Move
Enter
AUDIO
Balance Modo de audio : Estndar
E
Move
Enter
1
MENU
Seleccione A U D I O.
2
ENTER
Seleccione P a r l a n t e s d e T V.
3
ENTER
Seleccione E n c e n d i d o o A p a g a d o.
4
BACK
EXIT
! NOTA
G
Al apagar el altoparlante del televisor mientras el sistema de cine en casa Simplink est operativo, la salida de sonido pasar automticamente al altoparlante del sistema de cine en casa, pero cuando el altoparlante del televisor est prendido, el sonido se emitir por este.
95
AUDIO
Balance Modo de audio : Estndar
E
Mover
Ingresar
AUDIO
Balance Modo de audio : Estndar
E
Mover
Ingresar
50
1
MENU
Seleccione A U D I O.
2
ENTER
96
Seleccione R e s t a b l e c e r.
3
ENTER
4
EXIT
Men rpido
Aspecto de pantalla
F
Excepto 42/50PJ250R
1
Q.MENU
Seleccione S A P.
2 3
EXIT
Seleccione M O N O, S T E R E O o S A P.
97
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresar
OPCIN
Etiqueta de entrada
Mover
Ingresar
SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Espaol
Portugus
Confirmar
1
MENU
Seleccione O P C I N.
98
2
ENTER
Seleccione I d i o m a d e l m e n ( L a n g u a g e ).
3
ENTER
Seleccione su idioma deseado. De aqu en adelante la exhibicin en la pantalla aparecer en el idioma seleccionado.
4
BACK
SUBTITULAJE
El subtitulaje es un proceso que convierte la porcin de audio de un programa de televisin en palabras escritas, las cuales aparecen en la pantalla del televisor en una forma similar a los subtitulos. El subtitulaje permite al televidente leer el dilogo y narracin de los programas de televisin. Usando el subtitulaje Las leyendas son los subttulos del dilogo y narracin de los programas de televisin. Para programas pregrabados, el dilogo del programa puede prepararse anticipadamente con subttulos. Es posible subtitular un programa en vivo usando un proceso llamado "subtitulaje de tiempo real", el cual crea subtitulajes instantneamente. El subtitulaje de tiempo real es normalmente efectuado por reporteros profesionales que usan un sistema de taquigrafa a mquina y una computadora para traducir al ingls. El subtitulaje es un sistema efectivo para personas con incapacidad auditiva, y tamFOLLOW ME bin puede ayudar en la enseanza de idiomas. La imagen de arriba muestra un subtitulaje tpico. Consejos para el Subtitulaje No todas las transmisiones de TV incluyen seales de subtitulaje. Algunas veces las estaciones de Televisin transmiten cuatro seales de subtitulaje diferentes en el mismo canal. Seleccionando Modo 1 o el Modo 2, usted puede escoger cul seal visualizar. Modo 1 es la seal usual con subttulos, mientras que otro modo puede desplegar demostraciones o informacin sobre la programacin actual. El televisor puede no recibir seales de subtitulaje en las siguientes situaciones.
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
Mover
Ingresar
OPCIN
Etiqueta de entrada
Mover
Ingresar
SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
1
MENU
Seleccione O P C I N.
2
ENTER
Seleccione S u b t t u l o.
3
ENTER
Seleccione E n c e n d i d o o A p a g a d o.
4
2 , T e x t o 1-2 2. Seleccione M o d o 1-2
5
BACK
EXIT
99
CONFIGURACIN HORARIA
PROGRAMACION DEL RELOJ
Configuracin del reloj.
Deber realizar correctamente la configuracin horaria antes de utilizar la funcin de encendido/apagado de tiempo.
HORA
Reloj Hora de Apagado Hora de Encendido
Mover
Ingresar
HORA
Reloj Hora de Apagado Hora de Encendido
Mover
Ingresar
: Apagado : Apagado
2AM -Cerrar
1
MENU
Seleccione H O R A.
2
ENTER
Seleccione R e l o j.
3
ENTER
100
CONFIGURACIN HORARIA
Seleccione y ajustar H o r a o M i n u t o.
4
BACK
Si este televisor se desenchufa o se apaga mediante el principal de prendido, la funcin R e l o j quedar reiniciada.
HORA
Reloj Hora de Apagado Hora de Encendido
Mover
Ingresar
HORA
Reloj Hora de Apagado Hora de Encendido
Mover
Ingresar
: Apagado : Apagado
2:10 AM : Apagado
F
Encendido 2 AM 10 TV 2 30
1
MENU
Seleccione H O R A.
2
ENTER
CONFIGURACIN HORARIA
3
ENTER
4
ENTER
Escoja y ajuste el C a n a l o el V o l u m e n.
5
BACK
EXIT
101
CONFIGURACIN HORARIA
CONFIGURACIN DEL TEMPORIZADOR DE APAGADO AUTOMTICO
El Apagador para Dormir apaga el TV despus de un tiempo prefijado. Si apaga el TV despus de haber programado la Apagador para dormir, el ajuste se borrar.
HORA
Reloj Hora de Apagado Hora de Encendido
Mover
Ingresar
HORA
Reloj Hora de Apagado Hora de Encendido
Mover
Ingresar
: Apagado : Apagado
: Apagado
: Apagado Apagado Temporizador de Apagado : Apagado 10 min. 20 min. 30 min. 60 min. 90 min. 120 min. 180 min. 240 min.
1
MENU
Seleccione H O R A.
2
ENTER
Seleccione T e m p o r i z a d o r d e A p a g a d o.
102
CONFIGURACIN HORARIA
3
ENTER
4
BACK
Tambin ud. puede hacer el T e m p o r i z a d o r d e A p a g a d o con el men M e n r p i d o. Presione el botn S L E E P repetidamente para seleccionar el nmero de minutos.
APNDICE
LISTA DE VERIFICACIN DE PROBLEMAS
No se trabaja normalmente.
Verifique para ver si hay algn objeto entre el producto y el control remoto causando la obstruccin. Asegrese de apuntar el control remoto directamente al televisor. Estn puestas las bateras con la polaridad correcta (+con + y -con -)? Est correcta la configuracin del modo remoto de la operacin: TV, VCR etc.? Ponga nuevas bateras. * Esta caracterstica no se encuentra disponible para todos los modelos.
De repente la TV se apaga
Est configurado el tiempo para dormir? Verifique las configuraciones de control de la potencia. La potencia interrumpida. El Televisor se apagar automticamente en 15 minutos en caso de que no haya seal.
No sirve la funcin de video. Verifique si el producto est encendido. Intente otro canal. El problema puede ser con la transmisin. Est metido el cordn de alimentacin dentro del tomacorriente de la pared? Verifique la direccin y/o la ubicacin de su antena. Pruebe el tomacorriente, enchufe un cordn de alimentacin de otro producto en el tomacorriente donde estaba enchufado el cordn de alimentacin del producto.
No imagen No sonido
Es normal, la imagen es muda durante el proceso de inicio del producto. Favor de contactar a su centro de servicio, si la imagen no aparece cinco minutos despus.
Ajuste Color en la opcin del men. Mantenga una distancia suficiente entre el producto y el VCR. Color o imagen deficiente, o Intente otro canal. El problema puede ser con la transmisin. No color Estn instalados apropiadamente los cables de video? Active cualquier funcin para restablecer el brillo de la imagen.
APNDICE
Estacin o cable con problemas experimentales, sintonice a otra estacin. Si la seal de estacin es dbil, reubique la antena para recibir estacin ms debil. Verifique las fuentes de la interferencia posible.
Lineas o rayas en las imagenes No hay recepcin de imagen al conectar la toma HDMI
Verifique la antena (Cambie la direccin de la antena). Verifique que el cable HDMI admita la versin 1,3. Los cables HDMI que no admiten la versin 1,3 de HDMI, provocan parpadeos o no muestran la imagen en pantalla. Si este es el caso, utilice cables recientes que soporten la versin 1,3 de HDMI.
103
APNDICE
No sirve la funcin de audio. Presione el botn VOL o Volumen. Sonido mudo? Presione el botn MUTE. Intente otro canal. El problema puede ser con la transmisin. Estn instalados apropiadamente los cables de audio?
No salida de una de las bocinas Sonido raro desde interior del producto
Ajuste el Balance en la opcin del men. Un cambio en la ambiente de humedad o temperatura puede causar un sonido raro cuando enciende o apaga el producto y esto no significa la falla del producto.
Verifique que el cable HDMI admite la versin 1,3. Verifique que el cable USB admite la versin 2,0. Lea archivos MP3 normales.
Hay un problema en el modo PC. (Slo se aplica en el modo PC) La seal est fuera del rango (Formato no vlido) Barra o raya vertical en el fondo, Ruido horizontal y posicion incorrecta
104
APNDICE
MANTENIMIENTO
Las malfunciones anticipadas pueden ser prevenidas. La limpieza regular y cuidadosa puede extender la suma de tiempo que ud. va a tener su nueva TV. Asegurese apagar la TV y desenchufar el cordn de alimentacin antes de empezar cualquier tipo de limpieza.
Limpiando la pantalla
1 2
Aqui hay una buena manera para mantener su pantalla limpia por un tiempo. Moje una tela suave en una mezcla de agua tibia con un poco de suavizante de ropa, o detergente de platos. Escurra la tela hasta que est casi seca, luego limpie la pantalla con ella. Asegurese que no haya exceso de agua por la pantalla, luego dejela secar por el aire antes de encender su TV.
Limpiando el gabinete
Para remover la suciedad o polvo, limpie el gabinete con una tela suave, seca y sin pelusa. Favor de asegurarse no usar una tela mojada.
Ausencia Extendida
CUIDADO
G
Si ud. espera dejar su TV por un tiempo largo (como las vacaciones), ser buena idea desenchufar el cordn de alimentacin para proteger la TV contra el dao posible por alguna descarga electrica.
APNDICE
105
APNDICE
ESPECIFICACIONES DEL PRODUCTO
MODELOS Dimensiones (Ancho x Altura x Profundidad) incluyendo la base excluyendo la base incluyendo la base excluyendo la base MODELOS Dimensiones (Ancho x Altura x Profundidad) incluyendo la base excluyendo la base incluyendo la base excluyendo la base 42PJ250R (42PJ250R-MA)
988 x 688.5 x 260 mm (38.8 x 27 .1 x 1 0.2 pulgadas) 988 x 61 7 .8 x 55.3 mm (38.8 x 24.3 x 2.1 pulgadas) 21.6 kg (47 .6 libras) 20.0 kg (44.0 libras)
50PJ250R (50PJ250R-MA)
1 1 71.4 x 781.8 x 309.7 mm (46.1 x 30.7 x 1 2.pulgadas) 1 1 71.4 x 720.9 x 55.3 mm (46.1 x 28.3 x 2.1pulgadas) 30.0 kg (66.1 libras) 27.6 kg (60.8 libras)
Peso
42PJ350R (42PJ350R-MA)
988 x 688.5 x 260 mm .1 x 10.2 pulgadas) (38.9 x 27 988 x 61 7 .8 x 55.3 mm (38.8 x 24.3 x 2.2 pulgadas) 21.6 kg (47 .6 libras) 20.0 kg (44.0 libras)
50PJ350R (50PJ350R-MA)
1 1 71.4 x 781.8 x 309.7 mm (46.1 x 30.7 x 1 2.2 pulgadas) 1 1 71.4 x 720.9 x 55.3 mm (46.1 x 28.4 x 2.2 pulgadas) 30.0 kg (66.1 libras) 27.6 kg (60.8 libras)
Peso
Potencia requerida Sistema de la TV Cobertura de programas Impedancia de Antena Externa Temp.de operacin Humedad de operacin Temp.para almacenar Humedad para almacenar
AC100-240V ~ 50/60Hz NTSC, PAL-M/N VHF 2-13, UHF 14-69, CATV 1-125 75 ohm 32 ~ 104F (0 ~ 40C) Menos de 80% -4 ~ 140F (-20 ~ 60C) Menos de 85%
Condicin de ambiente
106
APNDICE
MODELOS Dimensiones (Ancho x Altura x Profundidad) incluyendo la base excluyendo la base incluyendo la base excluyendo la base MODELOS Dimensiones (Ancho x Altura x Profundidad) incluyendo la base excluyendo la base
42PJ260R (42PJ260R-MB)
988 x 688.5 x 260 mm (38.8 x 27 .1 x 1 0.2 pulgadas) 988 x 61 7 .8 x 55.3 mm (38.8 x 24.3 x 2.1pulgadas) 21.6 kg (47 .6 libras) 20.0 kg (44.0 libras)
50PJ260R (50PJ260R-MB)
1 1 71.4 x 781.8 x 309.7 mm (46.1 x 30.7 x 1 2.1pulgadas) 1 1 71.4 x 720.9 x 55.3 mm (46.1 x 28.3 x 2.1pulgadas) 30.0 kg (66.1 libras) 27.6 kg (60.8libras)
Peso
50PK550R (50PK550R-MA)
1171.4 x 786.2 x 309.7 mm (46.1 x 30.9 x 12.1 pulgadas) 1171.4 x 724.4 x 55.3 mm (46.1 x 28.5 x 2.1 pulgadas) 31 kg (68.3 libras) 28.6 kg (63.0 libras)
60PK550R (60PK550R-MA)
1392 x 915 x 367 mm (54.8 x 36 x 14.4 pulgadas) 1392 x 852 x 55.3 mm (54.8 x 33.5 x 2.1 pulgadas) 49.5 kg (109.1 libras) 45.0 kg (99.2 libras)
Peso
Potencia requerida Sistema de la TV Cobertura de programas Impedancia de Antena Externa Temp.de operacin Humedad de operacin Temp.para almacenar Humedad para almacenar
AC100-240V ~ 50/60Hz NTSC, PAL-M/N VHF 2-13, UHF 14-69, CATV 1-125 75 ohm 32 ~ 104F (0 ~ 40C) Menos de 80% -4 ~ 140F (-20 ~ 60C) Menos de 85%
Condicin de ambiente
APNDICE
Las especificaciones mostradas arriba se pueden cambiar sin previo aviso para la mejora de calidad.
107
APNDICE
CDIGOS DE IR
1. Cmo conectar
T1
Configuracin de cuadro
1r cuadro
Lead code
Cdigo de comando
Cdigo de datos
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Cuadro repetido
Tf
Cdigo de lder
9 ms 4,5 ms
108
APNDICE
Cdigo de repeticin
0,55 ms
9 ms
2,25 ms
Bit 1
0,56 ms 2,24 ms
Intervalo de cuadros: Tf La forma de onda es transmitida mientras una tecla est presionado.
Tf Tf Tf=108ms @455KHz
Nota
Botn control Remoto (Encendido/apagado) Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto Botn control Remoto
Excepto 42/50PJ250R
APNDICE
Para 42/50PJ250R
109
APNDICE
CONFIGURACIN DE DISPOSITIVO EXTERNO DEL CONTROL
El puerto RS-232 permite conectar el conector de entrada RS-232C a un dispositivo de control externo (como una computadora o un sistema de control de A/V) para controlar en forma externa las funciones del televisor. Nota: El RS-232 de esta unidad est diseado para ser utilizado con hardware y software de control de RS232 de terceros. Las instrucciones que aparecen a continuacin se entregan para servir de ayuda con el software de programacin o para probar la funcionalidad del uso de software telenet. En modo USB y Bluetooth, no es compatible con funcin RS-232C.
Instalacin de RS-232C
VIDEO
AUDIO IN (RGB/DVI)
VIDEO
AV
L
2
HDMI IN
RGB (PC)
IN1
AUDIO
PR
ANTENNA IN
2
PC
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
110
COMPONENT IN
PB
APNDICE
Configuraciones de RS-232C
Se puede utilizar cualquiera de los cables a continuacin. Configuracin de 7-Cables (Cable de mdem NULL hembra-hembra serial ) PC RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 D-Sub 9 TV 3 2 5 6 4 8 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS Configuracin de 3-Cables (No estndar) PC 2 3 5 4 6 7 8 D-Sub 9 TV 3 2 5 6 4 7 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS
Configuracin de ID
Use esta funcin para especificar un nmero de ID de la unidad. Refirase a Mapeo de datos reales.
OPCIN
Etiqueta de entrada SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
Mover
Ingresar
OPCIN
Etiqueta de entrada
Mover
Ingresar
SIMPLINK Bloqueo de Teclas Subttulo ID del Televisor Mtodo de ISM Modo Demo.
E
: Normal
APNDICE
: Apagado Cerrar
1
MENU
Seleccione O P C I N.
2
ENTER
* Mapeo de datos reales 1 00 : Paso 0 A : Paso 10 F : Paso 15 10 : Paso 16 64 : Paso 100 6E : Paso 1 10
* Mapeo de datos reales 2 00: -30 01: -29 02: -28 1E: 0
Seleccione ID del Televisor. Seleccione el nmero deseado de ID del monitor. Rango de ajuste de ID del Televisor 1 - 99. Regresar al men anterior.
3
ENTER
28: +10 3A : +28 3B : +29 3C : +30 4E: N/A 4F : N/A 50: N/A
4
BACK
EXIT
111
APNDICE
Lista de Referencia de los Comandos
COMANDO 1 COMANDO 2 DATO (Hexadecimal) COMANDO 1 COMANDO 2 DATO (Hexadecimal)
01. Alimentacin 02. Relacin de Aspecto 03. Modo Pantalla 04. Silenciador de volumen 05. Control de volumen 06. Contraste 07 . Brillo 08. Color 09. Tinte 10. Nitidez 1 1. Seleccin de OSD 12. Modo bloqueado de control remoto 13. Balance
k k k k k k k k k k k k k
a c d e f g h i j k l m t
14. Temperatura de color x 15. Agudos 16. Graves 17 . Estado anormal 18. Mtodo de ISM 19. Auto-configuracin 20. Bajo consumo (Ahorro de energa) 21. Seleccin de canal 22. Agr./Eli. de canal 23. Botones 24. Seleccin de entrada k k k j j j m m m x
u r s z p u q a b c b
112
APNDICE
Reconocimiento de NG [Command2][ ][Set ID][ ][NG][Data][x] La TV transmite ACK (reconocimiento)basando en este formato cuando recibe un dato anormal de funciones no-viable o errores de comunicacin. [Comando 2] : Use como comando. [ID del Televisor] : Use el carcter pequeo, si la ID definida es 10, enviar 0,a [DATO] : Use el carcter pequeo, si los datos son 0xab, enviar a, b. [NG] : Use el carcter grande
0 1 . A l i m e n t a c i n ( C o m a n d o: k a ) Para controlar la potencia Encendida/Apagada de la TV. Transmisin [k][a][ ][ID del Televisor][ ][Dato][Cr] Dato 00 : Apagado Dato 01 : Encendido
0 5 . Control de volumen (Comando: k f) Para ajustar el volumen. Ud. tambin puede ajustar el volmen con los botones de volumen del control remoto. Transmisin [k][f][ ][ID del Televisor][ ][Dato][Cr] Dato Min : 00 - Mx : 64 Refirase a Mapeo de datos reales1 . Reconocimiento [f][ ][ID del Televisor][ ][OK/NG][Dato][x]
Reconocimiento [a][ ][ID del Televisor][ ][OK/NG][Dato][x] Para mostrar la potencia Encendida/Apagada. Transmisin [k][a][ ][ID del Televisor][ ][FF][Cr] Reconocimiento [a][ ][ID del Televisor][ ][OK/NG][Dato][x] * Si existe un perodo de retraso entre el comando y el mensaje de confirmacin durante la secuencia de encendido, este debera ser descrito como "Nota: en este modelo, la TV enviar la confirmacin tras completarse el proceso de encendido. Podra existir un perodo de retraso entre el comando y la confirmacin. 02. Proporcin de aspecto (Comando: k c) Para ajustar el formato de pantalla. (Formato de la imagen principal) Ud. Puede hacer la Relacin de Aspecto con el men Imagen. Transmisin [k][c][ ][ID del Televisor][ ][Dato][Cr] Dato 01: 4:3 02: 16:9 09: Slo bsqueda 04: Zoom 10: Zoom cine1
06. Contraste (Comando: k g) Para ajustar el contraste de la pantalla. Tambin puede ajustar el contraste en el men Imagen. Transmisin [k][g][ ][ID del Televisor][ ][Dato][Cr] Dato Min : 00 - Mx : 64 Refirase a Mapeo de datos reales1. Reconocimiento [g][ ][ID del Televisor][ ][OK][Dato][x]
07. Brillo (Comando: k h) Para ajustar el brillo de la pantalla. Tambin puede ajustar el brillo en el men Imagen. Transmisin [k][h][ ][ID del Televisor][ ][Dato][Cr] Dato Min : 00 - Mx : 64 Refirase a Mapeo de datos reales1. Reconocimiento [h][ ][ID del Televisor][ ][OK/NG][Dato][x]
1F: Zoom cine16 Reconocimiento [c][ ][ID del Televisor][ ][OK/NG][Dato][x] * Al utilizar la entrada RGB, debe seleccionar entre el formato de imagen en pantalla 16:9 o 4:3. * Esta funcin slo se opera en los modos de Componente/HDMI(720progresivo/1 080entrelazado/1 080progresivo) input source. 0 3 . Modo de pantalla (Comando: k d) Para seleccionar mudo de pantalla encendido/apagado. Transmisin [k][d][ ][ID del Televisor][ ][Dato][Cr] Dato 00 : Mudo encendido de pantalla(Imagen apagada) Dato 01 : Mudo apagado de pantalla(Imagen encendida) Dato 00 : Silencio de video off (desc.) Dato 10 : Silencio de video on (act.) Reconocimiento [d][ ][ID del Televisor][ ][OK/NG][Dato][x]
* Slo en el caso de que la funcin Silencio de video est activada,el televisor mostrar la visualizacin en pantalla (OSD)Pero en el caso de que la funcin Silencio de video est desactivada,el televisor no mostrar la visualizacin en pantalla (OSD).
08. C o l o r ( C o ma n do : k i )
APNDICE
Para ajustar el color de pantalla. Tambin puede ajustar el brillo en el men Imagen. Transmisin [k][i][ ][ID del Televisor][ ][Dato][Cr] Dato Min : 00 - Mx : 64 Refirase a Mapeo de datos reales1. Reconocimiento [i][ ][ID del Televisor][ ][OK/NG][Dato][x]
09. Tinte (Comando: k j) Para ajustar el tinte de la pantalla. Ud. puede ajustar el tinte en el men Imagen. Transmisin [k][j][ ][ID del Televisor][ ][Dato][Cr] Dato Rojo : 00 - Verde : 64 Refirase a Mapeo de datos reales1. Reconocimiento [j][ ][ID del Televisor][ ][OK/NG][Dato][x]
04. S i l e n c i a d o r d e v o l u m e n (Comando: k e) Para controlar el encendido/apagado del silenciador de volumen, Tambin puede ajustar el silenciador utilizando el botn MUTE en el control remoto. Transmisin [k][e][ ][ID del Televisor][ ][Dato][Cr] Dato 00: Encendido del silenciador de volumen (Sin volumen) Dato 01: Apagado del silenciador de volumen (Con volumen) Reconocimiento [e][ ][ID del Televisor][ ][OK/NG][Dato][x]
113
APNDICE
10. Nitidez (Comando: k k) Para ajustar la nitidez de la pantalla. Tambin puede ajustar la nitidez en el men Imagen. Transmisin [k][k][ ][ID del Televisor][ ][Dato][Cr] Dato Min: 00 - Mx: 64 Refirase a Mapeo de datos reales1. Reconocimiento [k][ ][ID del Televisor][ ][OK/NG][Dato][x] 11. Seleccin de OSD (Comando: k l) Para seleccionar OSD (On Screen Display) encendido/apagado controlando remotamente. Transmisin [k][l][ ][ID del Televisor][ ][Dato][Cr] Dato 00: OSD apagado Dato 01: OSD encendido Reconocimiento [l][ ][ID del Televisor][ ][OK][Dato][x] 17. Estado anormal (Comando: k z) 12. Modo bloqueado de control remoto (Comando: k m)
Para bloquear el control remoto y los controles del panel frontal en la unidad. (Si ud. no est usando el control remoto y tampoco los controles del panel frontal en la unidad, use este modo. Cuando la potencia principal enciende y apaga, el bloqueo de control remoto ser liberado.)
15. Agudos (Comando: k r) Para ajustar los agudos. Tambin puede ajustar los agudos en el men audio. Transmisin [k][r][ ][ID del Televisor][ ][Dato][Cr] Dato Min: 00 - Mx: 64 Refirase a Mapeo de datos reales1. Reconocimiento [r][ ][ID del Televisor][ ][OK/NG][Dato][x]
16. Graves (Comando: k s) Para ajustar los graves. Tambin puede ajustar los graves en el men audio. Transmisin [k][s][ ][ID del Televisor][ ][Dato][Cr] Dato Min: 00 - Mx: 64 Refirase a Mapeo de datos reales1. Reconocimiento [s][ ][ID del Televisor][ ][OK/NG][Dato][x]
Para reconocer un estado anormal. Transmisin [k][z][ ][ID del Televisor][ ][FF][ ][Cr] Dato FF: Leer Reconocimiento [z][ ][ID del Televisor][ ][OK/NG][Dato][x] Dato 00: Normal (Encendido y existe la seal) Dato 01: No seal (Encendido) Dato 02: Apague la TV con el control remoto Dato 03: Apague la TV con la funcin de temporizador para dormir Dato 04: Apague la TV con la funcin RS-232C Dato 05: 5V bajo Dato 06: AC bajo Dato 07: Apague la TV con la funcin de alarma de abanico (opcin) Dato 08: Apague la TV con la funcin de tiempo apagado Dato 09: Apague la TV con la funcin de auto-dormido Dato a: Apague la TV para detectar el AV. * Esta funcin es para leer slo.
Transmisin [k][m][ ][ID del Televisor][ ][Dato][Cr] Dato 00: Bloquear Apagado Dato 01: Bloquear Encendido Reconocimiento [m][ ][ID del Televisor][ ][OK/NG][Dato][x] 13. Balance (Comando: k t) Para ajustar el balance.
114
APNDICE
Tambin puede ajustarse el balance en el men audio. Transmisin [k][t][ ][ID del Televisor][ ][Dato][Cr] Dato Min: 00 - Mx: 64 Refirase a Mapeo de datos reales1. Reconocimiento [t][ ][ID del Televisor][ ][OK/NG][Dato][x]
14. Temperatura de color (Comando: x u) Para ajustar la temperatura de color. Tambin puede ajustar la temperatura de color en el Men Imagen. Transmisin [x][u][ ][ID del Televisor][ ][Dato][Cr] Dato W50 : 00 ~ C50 : 64 Reconocimiento [u][ ][ID del Televisor][ ][OK/NG][Dato][x]
1 8 . Mtodo de ISM (Comando: j p) Para evitar tener una imagen fija permanente en pantalla. Transmisin [j][p][ ][ID del Televisor][ ][Dato][Cr]
MSB 0 0 0 0 0 0 0
LSB 0 Orbiter
Blanquear
Normal
Lavado de Color
Dato 02: Orbiter Dato 04: Blanquear Dato 08: Normal Dato 20: Lavado de Color * No pueden ajustarse ms de dos tipos de funciones al mismo tiempo. Reconocimiento [p][ ][ID del Televisor][ ][OK/NG][Dato][x] 1 9 . A u t o - c o n f i g u r a c i n ( C o m a n d o : j u ) -Except 42/50PJ250R Para ajustar la posicin de imagen y minimizar el temblor de imagen automticamente. Slo se trabaja en el modo RGB. Transmisin [j][u][ ][ID del Televisor][ ][Dato][Cr] Dato 01: Para ajustar Reconocimiento [u][ ][ID del Televisor][ ][OK/NG][Dato][x] 2 0 . Ahorro de Energa ( C o m a n d o : j q ) * Mapeo de datos reales 1 00 : Paso 0 A : Paso 10 Para reducir el consumo de potencia del monitor. Transmisin [j][q][ ][ID del Televisor][ ][Dato][ ][Cr] Dato 00: Ahorro de energia Apagado 01: Ahorro de energia: Mnimo 02: Ahorro de energia: Medio 03: Ahorro de energia: Mximo 05: Desconexin de pantalla 10: Sensor Inteligente Reconocimiento [q][ ][ID del Televisor][ ][OK/NG][Dato][x] 6E : Paso 1 10 73 : Paso 1 15 74 : Paso 1 16 C7 : Paso 199 FE : Paso 254 FF : Paso 255 3A : +28 3B : +29 3C : +30 4E: N/A 4F : N/A 50: N/A F : Paso 15 10 : Paso 16 64 : Paso 100 * Mapeo de datos reales 2 00: -30 01: -29 02: -28 1E: 0
APNDICE
28: +10
115
APNDICE
21 . S e l e c c i n d e c a n a l (Comando: m a) Sintoniza canales en los nmeros fsicos siguientes. Transmisin [m][a][ ][ID del Televisor][ ][Dato0][ ][Dato1] [ ][Dato2][ ][Dato3][ ][Dato4][ ][Dato5][Cr] Dato0: Nmero de canal fsico(*transmitir por cdigo hexadecimal) NTSC air: 02-45 NTSC cable: 01, 0e-7d Dato1, Dato2: Mayor nmero de canal Dato1: Bytes altos Dato2: Bytes bajos Nmero de canal en dos partes: Nmero mayor - Nmero menor Nmero de canal en una parte: En caso de utilizar un nmero de canal en una parte, el canal menor no ser necesario. Dato3 & 4: Nmero de canal menor No se necesita para NTSC. Dato3: Bytes altos Dato4: Bytes bajos Dato5: Atributo 7 0 1
Imagen principal/secundaria
6 0 1
5 0 1
Reservado
3 0 0
2 0 0
1 0 0
0 0 1
Principal Secundaria
Dos Uno
X X
Ejemplo) 1. Comando: ma 00 23 xx xx xx xx 01 atributo (0x01): datos de imagen principal, dos partes (no es obligatorio), uso de canal fsico, cable NTSC xx: en caso de sintonizacin de canal analgico el nmero de canal mayor o menor no importar
116
APNDICE
Reconocimiento[a][ ][ID del Televisor][ ][OK][Dato0][Dato1] [Dato2][Dato3][Dato4][Dato5][x][a][ ][ID del Televisor] [ ][NG][Dato0][x] 2 2 . Agr./Eli. de canal (Comando: m b) Para agregar y eliminar canales. Transmisin [m][b][ ][ID del Televisor][ ][Dato][Cr]
01 : Memorizar programa
23. Botones (Comando: m c) Para mandar el cdigo de botn remot IR. Transmisin [m][c][ ][ID del Televisor][ ][Dato][Cr] Dato: Cdigo de botones - Refirase a la pgina 103. Reconocimiento [c][ ][ID del Televisor][ ][OK/NG][Dato][x]
24. Seleccin de entrada (Comando: x b) (Entrada de la imagen principal) Para seleccionar la fuente de entrada para la TV. Transmisin [x][b][ ][ID del Televisor][ ][Dato][Cr] Dato: Estructura MSB 0 0 0 0 0 0 0 LSB 0
Entrada externa
Entrada externa 0 0 0 0
1
0 0
1 1
0
1
0 0 0
1
0
1
Nmero de entrada 0 0 0 0 0 0 0 0 0 0
1 1
0
1
0
1
APNDICE
117
El nmero de modelo y serie del televisor se encuentra en la parte posterior y en un lateral del televisor respectivamente. Antelo a continuacin para tenerlo disponible en caso de necesitar asistencia.
Modelo Serie