Professional Documents
Culture Documents
Storage Section
Active-Active cluster architecture File and block interface 2~24 nodes, up to 15PB capacity SPECsfs2008 3M+ OPS Rich features for data management
Open hardware and distributed file system architecture Posix/NFS/CIFS/JDBC/ODBC interface Multi-GE interconnect
HDP3500E
VTL6900
Dorado2100 G2
Dorado5100
VIS6600T
Data Protection
Integrate with NBU DB, file and OS data protection VM data protection
Disk Storage
Up to 400K IOPS of SPC-1 Access latency low to 500s Four-level data protection
Up to 600K IOPS of SPC-1 Access latency low to 500s Four-level data protection
S2200T
S2600T/S5500T/S5600T/S5800T
S6800T
HVS85T/HVS88T
Disk Storage
Dual controllers 4GB cache 204 disks Unified Storage, supports both block and file applications Up to 192GB cache Up to 1,440 disks
Storage Software
IOPS
Number of le engine
NA
OPS
Cache
drive type
SAS/NL SAS/ SATA SSD/SAS/NL SAS/SATA SSD/SAS/NL SAS/SATA SSD/FC/SAS/ NL SAS/SATA SSD/FC/SAS/ NL SAS/SATA SSD/FC/SAS/ NL SAS/SATA
Host port
8 Gbps FC or 1 Gbps iSCSI 8Gbps FC, 1Gbps iSCSI, 10Gbps Iscsi(TOE)
Backend port
6Gb SAS
S2200T
18,000
NA
2/4
S2600T
40,266 *
100,000 8/16
276
12/24
6Gb SAS
S5500T
60,242 *
2/4
200,000 8/16/32
528
12/24
6Gb SAS 4Gb FC/6Gb SAS 4Gb FC/6Gb SAS 4Gb FC/6Gb SAS
S5600T
102,471 *
2/4/6
300,000 24/48
1152
24
S5800T
130,000
2/4/6/8
400,000 96/192
1440
24
4/4~16
4/4~20
S6800T
250,388 *
NA
NA
192/384 1440
24
4/4~20
*: SPC-1 Result
EMC
VMAXe VNX 7500 XIV
IBM
NetApp
FAS6200 FAS3270 E7900 FAS3240 E7900 FAS3210 E5400 FAS2240 E2600 FAS2040
HP
Dell
Compellent
HDS
V7000U
Compellent AMS2500
100K~200K
S5600T
VNX 5700
DS5300
PS6010
50K~100K
S5500T
VNX 5500
DS5100
PS6000
AMS2300
25K~50K
S2600T
DS5020
P4000
PS4000
AMS2100
BAND2
5K~25K
S2200T
DS3500
P2000
MD3600 MD3200
300K~500K
N8500
S200 x400
N7900 SoNAS
FAS6280 FAS6080
BAND6
200K~300K
N8500
S200 x400
N6060 SoNAS
FAS6240 FAS6040
Dorado2100 G2
Dualcontroller
100
25
6Gb SAS
16
Dorado5100
Dualcontroller
600,052
8Gb FC : 40 10GE : 20
96
96
24
6Gb SAS
20
N8500
2~24 nodes
3,064,602*
4~16/node
16~192 GB/node
15PB
12/24
FC/SSD/SAS/ NL_SAS/SATA
10GE/GE
NA
Intended use
storage space is allocated based on the actual amount of written data , improve resource utilization Using SSD and hotspot identification technology, the hot data is copied from the HDD to the SSD to enhance the performance Based on the point-in-time data copy, provides data protection for local failure
S2200T
S2600T/5500T/ 5600T/5800T
HyperThin
S6800T
HyperThin
N8500
HyperThin
Dorado
HyperThin
SmartCache HyperImage(Block) Snapshot(File) HyperCopy HyperClone HyperMirror (Synchronous) HyperMirror (Synchronous) HyperMirror (Asynchronous) (Block) File Engine Replication(File) DiskGuard
SmartCache
SmartCache
Snapshot
HyperImage HyperCopy
HyperImage HyperCopy HyperClone HyperMirror (Synchronous) HyperMirror (Asynchronous) (Block) File Engine Replication(File)
HyperImage
The heterogeneous Data migration between heterogeneous devices volume data copy Volume cloning Synchronous remote replication provide multiple real-time copies of data volumes, can be used for the production, testing Provide data protection from power outages and disasters, to ensure zero data loss
HyperMirror (Synchronous)
Provide a long distance data protection from power outages and disasters; can accept some data loss
HyperMirror (Asynchronous)
HyperMirror (Asynchronous)
HyperMirror (Asynchronous)
Host Disk Protection data protection for application consistency Storage device management NAS protocols Multipath Storage Resource Management VMware VAAI
Protect the host disk partition, the operating system and files
DiskGuard
DiskGuard
Require the data consistency of application program UltraAPM Provide configuration, monitoring and management ISM of storage device Require standard protocol when hosts access NAS storage Provide path selection, path switching when hosts access SAN storage Provide the end-to-end management of the storage from the host / virtual machine, network to storage device Compatible with vSphere VAAI to enhance the storage efficiency of virtual machine Compatible with Vmware SRM interface, realize disaster recovery of virtual machine Compatible with SMI-S standard protocols, provides a standard interface for third-party management system UltraPath
UltraAPM
UltraAPM
ISM
ISM CIFS/NFS/FTP/Http
ISM
UltraPath
UltraPath
InfraControl
InfraControl
InfraControl
InfraControl
Support 5.1
NA
NA
Vmware SRM
SMI-S CTP
SMI-S 1.4
Product description
Product description
Power module
1+1 redundant Provides a conversion efficiency of 92%. (The conversion efficiency of golden power supplies is 88%.)
Fan/BBU
Intelligent fan speed control BBUs are built in the system to provide power failure protection
Product description
Product description
Business Impact
Structured and unstructured data coexist Integration reduces the total cost of ownership Large capacity to meet the rapid data growth
To achieve the best level of service High performance access Always available (best state) Data is protected Improve the performance of reading data Easy to manage Automation efficiency
Management costs
Cost-effective Efficient storage utilization Reduce management costs Cost-effective warranty options
Product description
Interface module File Engine S2600T/ S5500T One Intel Xeon E5504 2.0 GHz 16GB S5600T/ S5800T One Intel Xeon E5645 2.4 GHz 24GB
Each node has six I/O module slots. Each node has a GE card for heartbeat communication. Each node has an 8 Gbit/s Fiber Channel adapter for array connection. Each node has a maximum of four GE or 10GE adapters for NAS host interfaces.
CPU
Memory
Product description
Power module
Achieves 1+1 redundancy Provides a conversion efficiency of 92%. (The conversion efficiency of golden power supplies is 88%.)
Controller module
Provides management network ports and serial ports Carries two onboard 4x6 Gbit/s SAS ports Supports one expansion I/O module Carries four onboard GE ports
Fan/BBU
Fan speed is intelligently controlled BBUs are built in the system to provide power failure protection
Product description
Controller module
Provides management network ports and serial ports Carries two onboard 4x6 Gbit/s SAS ports Supports one expansion I/O module Carries four onboard 8 Gbit/s Fiber Channel ports
Fan/BBU
Fans are in 3+1 redundancy. (The system can tolerate the failure of one fan.) Fan speed is intelligently controlled BBUs are built in the system to provide power failure protection
Power module
Achieves 1+1 redundancy Provides a conversion efficiency of 92%. (The conversion efficiency of golden power supplies is 88%.)
Product description
BBU
2+2 redundancy DC/AC power failure protection
Interface module
12 I/O module slots Up to 1440 hard disks Hot-swappable I/O modules Diversified interface types: 8 Gbit/s Fiber Channel, 4 Gbit/s Fiber Channel, 4x6 Gbit/s SAS, GE/10GE
Fan
5+1 redundancy (the failure of one fan is tolerable.) Intelligent fan speed control
Product description
SAN S6800T
Product description
BBU module
2+2 redundancy. Supports DC/AC power failure protection
Interface module
Provides 12 I/O modules slots Supports up to 1,440 hard disks Supports hot-swappable interface cards Supports various types of interfaces cards: 8 Gbit/s FC, 4 Gbit/s FC, 4 x 6 Gbit/s SAS, and GE/10GE
Fan module
5+1 redundancy of fans (Faults on one fan do not affect the normal running of the system.) Intelligent fan speed adjustment
Product description
N8500
OceanStor N8500 cluster NAS storage system is an industry-leading, unified storage platform for high-end applications, with high performance, high scalability, high reliability, high efficient data management features.
N8500
Product description
Rack GE switch unit (optional) FC switch unit (optional) Engine unit Storage unit
1Clustered NAS File Engine 2Fabric Cable 3FC Switch unit 4Storage unit controller 5Storage unit disk enclosure
10
Product description
N8500 Engine
Storage unit
Product description
FC switches
Storage unit
11
Product description
Fan module
Fan 5+1 redundancy Low power consumption for heat dissipation Granular fan speed control
Interface module
By default, each node provides four GE service interfaces, four 8 Gbit/s FC back-end storage interfaces, and two GE heartbeat interfaces Each node provides three PCE2.0 8x interface card slots for the expansion of GE/10GE service interface card or 8 Gbit/s FC back-end storage interface card All the interface cards support hot swapping
Power module
2+2 redundancy 92% power conversion efficiency
Product description
Power module
1+1 redundancy 92% power conversion efficiency
12
Product description
BBU module
2+2 redundancy DC/AC power failure protection
Interface module
12 interface card slots A maximum of 1440 hard disks All the interface cards support hot swapping Various interface types, such as 8 Gbit/s FC, 4 Gbit/s FC, 6 Gbit/s SAS, GE, and 10GE
Fan module
Fan 5+1 redundancy Low power consumption for heat dissipation. Granular fan speed control
Management module
2+2 redundancy Hot swap Embedded reliable SSD as the system coffer
Power module
2+2 redundancy 92% power conversion efficiency
Product description
Dorado2100 G2
Dorado5100
13
Product description
Dorado2100 G2
Key selling points:
600K IOPS, Microsecond-level access latency, providing ultra high efficiency. Fully redundant architecture, Active/Active mode, enabling services to always remain online.
Superior performance
Dorado2100 G2 provides up to 600K IOPS, equivalent in performance to the traditional array with 750 pcs 15K rpm SAS hard drives. Access time: access latency is as low as 500 s, only 5% of the traditional array delay.
Green energy-saving
Low power consumption: Typical power consumption of the system is less than 110W, compared to traditional arrays with the same performance, energy saves up to 90%.
Product description
Dorado 5100
Key selling points:
1M IOPS, Microsecond-level access latency, providing ultra high efficiency. Fully redundant architecture, Active/Active mode, enabling services to always remain online. Superior performance
SPC-1 IOPS: Dorado5100 provides up to 600,052 SPC-1 IOPS , equivalent in performance to the traditional array with 2000 15K rpm SAS hard drives. Access time: access latency is as low as 500 s, only 5% of the traditional array delay.
Green energy-saving
Low power consumption: Typical power consumption of the system is less than 110W, compared to traditional arrays with the same performance, energy saves up to 90%.
14
Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Version No.: M3-035262-20130316-C-4.0 www.huawei.com