You are on page 1of 24

4.

Troubleshooting

4. Troubleshooting
4-1. First Checklist for Troubleshooting
1. Check the various cable connections first. - Check to see if there is a burnt or damaged cable. - Check to see if there is a disconnected cable connection or a connection is too loose. - Check to see if the cables are connected according to the connection diagram. 2. Check the power input to the Main Board. 3. Check the following circuits. No raster appears: Function PBA, Main PBA, I/P PBA 55V develop but no screen: Main PBA 5V does not develop: I/P PBA 4. Check the voltage in and out between the IP Main Board, between the IP Panel, and between the Main LVDS Boards.

4-1

4. Troubleshooting

4-2. No Power
Symptom - Though the power swtich on, the LED power off and the screen is blank. - Check Power cable. Major checkpoints - Check whether the Lamp connector is connected correctly to the IP. - Check whether the power cable is connected correctly to the MAIN. - Check whether the Function cable is connected correctly to the MAIN.

CN1001

C1109

Main Board Front Diagnostics LAMP off, power indicator LED red color? Yes Does proper DC 13V appear at DC5V. Yes Does proper DC13V appear at C1004? Yes Does proper DC3.3V, 1.2v appear at C1109? Yes A power is supplied to set? No Check a other function.(No picture part) Replace a lcd panel. No Check IC1013, IC1005. Change a main PBA. No Change a Assy PCB Power. No Change a Assy PCB Power. No Check a connection a power cable.

Caution

Make sure to disconnect the power before working on the IP board.

4-2

4. Troubleshooting

4-2-1. Circuit diagrams when the power does not turn on


1/10W

1 R1301 2
0OHM

PWM_DIMMING_OUT

MGND1

CN1001
1 2 3 1 4 1 5 6 7 1 8 9 1 1 1 1 1

B5V

4.7KOHM
1 2

R1001_DE

1:PWM 2:13V/0.65A 3:GND 4:GND 5:GND 6:5.1V/3.0A 7:5.1V/3.0A 8:A-DIMMING 9:ON/OFF


MGND2

A13V

A5V
R1002 0OHM R1031 4.7KOHM

B5V
C1002

2
100UF

C1003

0OHM

R1004

FGND

1UF

R1032 4.7KOHM

FGND

CN_SMD_S_009

C1001_22

2 2

SW_INVERTER

FGND

FGND

L:INVERTER ON H:INVERTER OFF

B3.3V_DTV
B5V A5V
SI4435BDY-T1-E3
BEAD_CHIP

B3.3VD
2

BD1022 TP1002

HIGH:ON LOW:OFF
R1030 10KOHM 1/10W

C1107 1UF 10V

R1040 100KOHM 1/10W

IC1023
1 2 3 4

5A (MAX)
1
AP1084K33A
IN OUT GND

IC1013

8 7 6 5

C1120 100NF 25V

C1110 100UF 6.3V

C1109 100UF 6.3V FGND

C1112 100NF 25V

R1043 10KOHM 1/10W

FGND

FGND

FGND

FGND

TP1001 POWER_ON

C E

Q1006 2SC2412K-Q

FGND

BD1034

BEAD_CHIP

Q1005

KTC3875S-Y

C1004 100UF 6.3V

C1005 100NF 25V

25V

4-3

100NF 50V

4. Troubleshooting

4-3. No Video (Analog PC)


Symptom - Though the LED power turns on, the screen is blank when connecting the VGA cable. - Even though the LED power turns on, the screen is blank when connecting the VGA cable. Major checkpoints - Check the D-sub cable connections. - Check whether the LVDS cable is connected correctly to the panel. - Check whether the lamp connector of the panel is connected correctly to the IP board.

RA5008 RA5009 RA5010 RA5011 RA5012 R3020 R3021 R3022

IC5002

Main Board Front Diagnostics Power Indicator is off. Lamp on, no video. Yes Check a PC source and check the connection of DSUB cable? Yes Does the sigmal appear at R3020, R3021,R3022? Yes Does the digital data appear at the output of RA5008~RA5012? Yes Check a LVDS cable? Replace a lcd panel? Caution No Please, Call to Samsung Co. LTD. No Check IC5002. Change a main PBA. No PC cable. Change a PC cable. Change a main PCB assy. No Input a analog PC signal and connected cable(DPMS).

Make sure to disconnect the power before working on the IP board.

4-4

4. Troubleshooting

4-3-1. Circuit diagrams and waveforms (Analog) when no screen is displayed on the monitor
DSUB_INPUT
BAV99

BD3100 1 BD3101 1 BD3102


BEAD_CHIP

2 2 2

PC_BLUE PC_GREEN PC_RED


AT24C02N-10SC 75OHM 1/10W R3021 75OHM 1/10W R3022 75OHM 1/10W
DDC_VCC

BEAD_CHIP

BEAD_CHIP

BAV99

DDC_VCC

BAV99

2R3020 1

1 C3001 2

2 C3002 1

1 D3014

1 D3015

1 D3016

10UF 10V

10KOHM 1/10W R3024

105-15202L88901-LF

2 R3023 1

100V

100V

100V

MGND2

DDC_WP
IC3002
2
47OHM

2.7KOHM

R3031

4.7KOHM

10KOHM 1/10W C3104

100PF 50V

50V

MGND1

C3105

100PF

5.6V

D3022

CN3000

VLZ5V6B VLZ5V6B VLZ5V6B VLZ5V6B VLZ5V6B

B5V_VCCA

R3103

22OHM

Q3003 2N7002

BZX84C5V6

FGND FGND FGND

100OHM 1/10W R3064

R3065

R3060_DE

R3061_DE 100OHM FGND

1 1

2 100OHM 2

100OHM

1/10W

Q3004

4.7KOHM

R3036

R3030 1

C3106 50V 22PF

6 1 11 7 2 12 8 3 13 9 4 14 10 5 15 1 1 1 1 1

10KOHM

R3027 1 22OHM

1
47OHM R3028 1

2
1/10W

FGND

R3025 2 R3026

1 1

8 1 7 6 5

VCC

E0 E1 MODE,/WC SCL E2 SDA VSS

1 2 3 4

FGND

A3.3V

1/10W

100OHM

IDENT_PC

1KOHM

1 R3029 2

PC_V_SYNC

2
G

2 R3063 1

PC_5V

1/10W R3062

PC_H_SYNC
G

100NF 25V

1/10W

A3.3V

PC_BLUE PC_GREEN PC_RED SC_B SC_G SC_R SC_ID SC_FB DTV_COMP_PB1 DTV_COMP_Y1 DTV_COMP_PR1

0OHM 1/10W 0OHM 1/10W 0OHM 1/10W

2 2 2 1 1 2 2 2 2

1R5044 47NF 25V1 1R5045 47NF 25V 1 1R5047 47NF 25V 1 2 R5049 2 R5050
R5051 R5085 R5054 R5055 47NF 25V1 1NF 50V 2 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1 47NF 25V1

FGND

100OHM 1/10W1 470OHM 1/10W1 100OHM 1/10W 1 100OHM 1/10W 1

FGND

100OHM 100OHM 100OHM 470OHM 100OHM 100OHM

1/10W 1/10W

1/10W 1/10W 1/10W

1 1 1 1

SC_CVBS_OUT1

0OHM 1/10W 2 0OHM 1/10W 2


10031HR-30
CN_SMD_S_030

CN5002

1 R5066_DE 1 R5062
PANEL_VCC

MGND2

MGND1

SPDIF_OUT DTV_RX DTV_TX SW_INVERTER TV_DTV_SEL

UART_SEL2

MSTAR_H_OUT AMP_RESET EEPROM_WP

30 29 28 27 26 25 24 1 23 1 22 1 21 1 20 1 19 1 18 17 1 16 1 15 14 1 13 1 12 1 11 1 10 1 9 1 8 7 1 6 5 4 3 10NF 2 50V 1 2 1

FGND

C5201

100UF 16V C5202

1 1 1 1 1 1

FGND

1/16W 100OHM

1/10W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

2 100OHM 4 6 8

R5010

R5011

2 4 6 8

2 4 6 8 2 4 6 8

2 4 6 8

RA5014

RA5015

RA5008

RA5010 RA5011

RA5009

2 4 6 8 2 4 6 8

1 3 5 7

1 3 5 7

1 3 5 7 1 3 5 7

1 3 5 7

1 3 5 7 1 3 5 7

RA5012

1/16W

FGND

100OHM

100OHM

47OHM

47OHM

47OHM

A3.3V_VDDP

A3.3V

47OHM

47OHM

10KOHM

VDDC

1 R5003_DE 10KOHM 1 R5004

R5506 2.2KOHM

232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193

DI[1] DI[0] IVSYNC IHSYNC IDE ICLK GPIOE[0] GPIOE[1] GPIOE[2] GPIOE[3] GND VDDP LVB0M LVB0P LVB1M LVB1P LVB2M LVB2P LVBCKM LVBCKP LVB3M LVB3P NC NC GND VDDP LVA0M LVA0P LVA1M LVA1P LVA2M LVA2P LVACKM LVACKP LVA3M LVA3P NC NC VDDP VDDC

FGND

R5006

2 2

A3.3V_ADC

DTV_CVBS SC_CVBS_IN VCOM1 TUNER_CVBS VCOM0

R5060_DE 2 100OHM 1/10W 1 100OHM R5086 1 2 0OHM 1/10W 1 R5057

2 C5113 1 C5055 2 C5056 2 C5057 2 C5058_DE C5114_DE 2 C5060_DE 2 C5061_DE 2 2 C5062 2 C5063 2 C5064 2 C5065 2 C5066 2 C5067

A3.3V_ADC

5.6V D3017

5.6V D3018

5.6V D3019

5.6V D3020

D3021

5.6V

SDA_TXD SCL_RXD

D2_HOT_PLUG D2_DDC_SDA D2_DDC_SCL PC_H_SYNC PC_V_SYNC

47OHM 1/10W 2 47OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 100NF 25V 1 100NF 25V 1 100NF 25V 1 2 R5040 2 R5041_DE 2 R5042 2 R5043

1R5033 1R5035 1R5036 1R5037 2 C5036 2 C5035 2 C5037 1 2 1 1

390OHM

R5034

C5038 C5039 C5040 C5041 100NF 25V1 2 C5043 100NF 25V1 2 C5045

2 1 2 2

4.7NF 50V 4.7NF 4.7NF

2 C5044

C5042

50V 1NF 50V 50V

2 C5046

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

REXT DDCDA_DA DDCDA_CK HSYNC1 VSYNC1 VCLAMP REFP REFM BIN1P SOGIN1 GIN1P RIN1P VCOM3 BIN0P VCOM2 GIN0P SOGIN0 RIN0P AVDD_ADC GND HSYNC0 VSYNC0 VSYNC2 BIN2P SOGIN2 GIN2P RIN2P C1 Y1 C0 Y0 CVBS3 CVBS2 CVBS1 VCOM1 CVBS0 VCOM0 AVDD_ADC CVBSOUT1 CVBSOUT0

PWM3 PWM2 NC NC GPIOB[6]

192 191 190 189 188 187

0OHM

1 2 100OHM 2 100OHM

R5999

4-5

1 1

4. Troubleshooting

4-3-2. Waveforms when no screen is displayed (Analog PC)


R,G,B Output Signal of IC5002

4-6

4. Troubleshooting

4-4. No Video (Digital-HDMI)


Symptom - The LED power turns on but the screen is blank when the DVI cable or HDMI cable is connected. - Even though the LED power turns on, the screen is blank when connecting the DVI cable or HDMI cable. - Check the DVI cable or HDMI cable connections. - Check whether the LVDS cable is connected correctly to the panel. - Check whether the lamp connector of the panel is connected correctly to the IP board.

Major checkpoints

IC5002 IC3250 D3006~D3013

D3204~D3211

Main Board Front Power Indicator is off. Lamp on, no video. Diagnostics Yes Check the connection of HDMI cable? Yes Does the digital data appear at D3006~D3013 ( HDMI1) or D3204~D3211 ( HDMI2)? Yes Does the digital data appear at output of IC3250 (PIN43,42,40,39, 37,36,34,33)? Yes Does the digital data appear at output of IC5002? Yes Check a LVDS cable? Replace lcd panel? Caution No Please, Call to Samsung Co. LTD. No Check the IC5002. Change a main PBA. No Check the IC3250. Change a main PBA. No Check HDMI cable. Change the cable. No Input a HDMI cable.

Make sure to disconnect the power before working on the IP board.

4-7

4. Troubleshooting

4-4-1. Circuit diagrams and waveforms (Digital-HDMI) when no screen is displayed on the monitor

HDMI_INPUT1
DDC_VCC

10KOHM 1/10W R3019

10KOHM 1/10W

1 R3018 2

2 C3019 1

10UF 10V

100NF 25V

2 C3020 1

DDC_WP
AT24C02N-10SC

HDMI1_5V

0OHM 1/10W

R3010

2
8.2V RLZ8.2 VLZ6V2B
S

IC3001
2 47OHM 2 47OHM
1/10W 1/10W

D3002

10KOHM 1/10W

R3057

MGND5 MGND2

MGND3
3701-001367

1 MGND1 MGND4

19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 20 21

1KOHM

2R3009 1

10OHM 1/10W R3012

1/10W

2
R3014 1 R3015 1 R3013

4.7KOHM 1/10W

R3001 1 R3002 1 R3003 1 R3004 1 R3005 1 R3006 1 R3007 1 R3008 1

2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 3 3 3 3 3 3 3 3

2 BAV99 1 D3008

2 BAV99 1 D3007

100V 2 BAV99

2 BAV99

1 D3010 100V

1 D3011 100V

2 1 D3012

1 D3006

1 D3009

BAV99

BAV99

100NF16V C3021_DE

100NF 16V C3022_DE

100NF 16V C3023_DE

100NF 16V C3025_DE

100NF 16V C3024_DE

100NF16V C3026_DE

FGND VLZ6V2B 6.2V C3030_DE 2 100NF 16V VLZ6V2B 6.2V C3029_DE 2 16V 100NF D3044_DE 2 D3043_DE 2

100NF 16V C3027_DE

100NF 16V C3028_DE

CN3001

2 BAV99 1 D3013

100V 2 BAV99

100V

100V

100V

100V

SIDE_HDMI_INPUT2
FGND

VLZ5V6B 5.6V

D3005

10KOHM 1/10W R3201

10KOHM 1/10W

10UF 10V

2 C3200 1

100NF 25V

C3201

R3200

HDMI2_5V

0OHM 1/10W

VLZ6V2B 6.2V

D3201

2N7002 Q3200

R3202

2
8.2V RLZ8.2

1 1 1 1

R3220

10KOHM 1/10W

MGND4 MGND2 18 19 17 16 15 14 12 13 11 10 9 8 6 7 5 4 3 2 MGND11 MGND5 MGND3

10OHM 1/10W 1KOHM

2
R3206

1/10W

R3207

2
R3208 1 R3209 1 R3210

1 R3205 2

4.7KOHM 1/10W

R3211 R3212 R3213 R3215 R3214 R3216 R3217 R3218

1 1 1 1 1 1 1 1

2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 2 0OHM 1/10W 3 3 3 3 3 3 3 3

1 D3204

1 D3206 100V 2 BAV99

D3208 1 100V

D3209 1 100V

1 D3205

1 D3210

100NF 16V C3202_DE

100NF16V C3204_DE

FGND

VLZ6V2B 6.2V C3211_DE 2 100NF 16V

D3212_DE 2 VLZ6V2B 6.2V C3210_DE 2 100NF 16V D3213_DE 2

100NF 16V C3207_DE

100NF 16V C3208_DE

100NF 16V C3209_DE

100NF 16V C3203_DE

100NF 16V C3205_DE

100NF 16V C3206_DE

100V 2 BAV99

1 D3207

1 D3211

BAV99

100V 2 BAV99

100V 2 BAV99

100V 2 BAV99

100V 2 BAV99

BAV99

FGND

D2_HOT_PLUG D2_DDC_SDA D2_DDC_SCL

D2_RXCLK-

B3.3V_H

HDMI1_HOT_PLUG

VLZ5V6B 5.6V

D3214

BD3250

1/10W 1.8KOHM

R3250_DE

BEAD_CHIP

10UF 10V C3251

100NF 25V

C3250

56 55 54 53 52 51 50 49 48 47 46 45 44 43

HDMI1_DDC_SDA HDMI1_DDC_SCL HDMI1_RXCLKHDMI1_RXCLK+

C3253

1NF 50V

CLK+A

CLK-A

HPD_SINK

SDA_SINK

HDMI1_RX0HDMI1_RX0+ HDMI1_RX1HDMI1_RX1+ HDMI1_RX2HDMI1_RX2+ HDMI2_RXCLKHDMI2_RXCLK+ HDMI2_RX0-

1 2 3 4 5 6 7 8 9 10 11 12 13 14

SCL_SINK

VDD D0-A D0+A GND D1-A D1+A VDD D2-A D2+A GND CLK-B CLK+B VDD D0-B

CLK+ VDD D0D0+ GND D1D1+ VDD D2D2+ GND OC_S0 OC_S1 OC_S2

MGND1

IC3250
FGND

PI3HDMI201ZFE

42 41 40 39 38 37 36 35 34 33 32 31 30 29

D2_RXCLK+ D2_RX0D2_RX0+ D2_RX1D2_RX1+ D2_RX2D2_RX2+

OPTION
B3.3V_H

SEL2_HDMI

3 1

FGND

4.7KOHM

R3254

FGND

GND

OE#

VDD

SCLA

SDAA

HPDA

SEL1

GND

CLK-

0OHM R3256_DE

0OHM R3257_DE

0OHM R3258_DE

EQ_S1

D1-B

D1+B

SCLB

SEL2

GND

GND

EQ_S0

D0+B

D2-B

D2+B

HPDB

SDAB

VDD

0OHM R3259

15 16 17 18 19 20 21 22 23 24 25 26 27 28

FGND
B3.3V_H

FGND

FGND

HDMI2_RX0+

HDMI2_RX1HDMI2_RX1+

HDMI2_RX2HDMI2_RX2+

HDMI2_HOT_PLUG HDMI2_DDC_SDA HDMI2_DDC_SCL

R3265_DE

0OHM

R3264 0OHM

FGND

0OHM R3260

OC_S2 OC_S1 OC_S0 0 0 0

0OHM R3261

0OHM

R3267_DE 0OHM

2 1

FGND

FGND

4-8

R3268

2 1

FGND

CN3004

FGND

1 R3203 2 47OHM 1 2 47OHM


R3204

1/10W 1/10W

SDA

VSS

100OHM 1/10W

2 22OHM 1/10W 2 22OHM 1/10W 2

IDENT_HDMI2

FGND

HDMI2_DDC_SDA HDMI2_DDC_SCL HDMI2_HOT_PLUG HDMI2_RXCLK-

HDMI2_RXCLK+ HDMI2_RX0HDMI2_RX1HDMI2_RX0+ HDMI2_RX2+

HDMI2_RX1+ HDMI2_RX2-

A3.3V

1 R3219 2
0OHM 1/10W

1/10W

B3.3V_H

1/10W 1.5KOHM

R3251
B3.3V_H

SEL1_HDMI

Q3201

C E

2 2 R3253 1
1/10W 10KOHM KTC3875S-Y

FGND

OE SEL1 SEL2 0 1 X 0 0 1 0 0 0

HPD_SINK

HPDA L L

L HPD_SINK

HPDB L

V_SWING 500

DE_EMPHASIS 0

Q3001 2N7002

1 R3011 2

FGND

D3001

FGND

R3016 1 R3017 1

8 7 6 5

VCC

E0 E1 MODE,/WC SCL E2 SDA VSS

1 2 3 4

1 1 1 1

IDENT_HDMI1
1 2 22OHM 1/10W 2 22OHM 1/10W 2

FGND

100OHM 1/10W

HDMI1_RXCLK+ HDMI1_RX0HDMI1_RX0+ HDMI1_RX1HDMI1_RX1+ HDMI1_RX2HDMI1_RX2+

HDMI1_RXCLK-

HDMI1_DDC_SDA HDMI1_DDC_SCL HDMI1_HOT_PLUG

A3.3V

1 R3066 2
0OHM

DDC_VCC

DDC_WP
AT24C02N-10SC

IC3003
8 7 6 5
VCC E0 E1 MODE,/WC SCL E2

1 2 3 4

BAV99 100V

D3004

D3003

BAV99 100V

D3200

D3202

BAV99 100V

BAV99 100V

D3203

3701-001388

SP06-14555-02

4. Troubleshooting

4-4-2. Waveforms when a blank screen is displayed (Digital-HDMI)


Digital Output Data of IC3250 Signal of HDMI(Data)

4-9

4. Troubleshooting

4-5. No Picture (Tuner_CVBS)


Symptom - The LED power turns on but the screen is blank when the RF cable is connected. - Even though the LED power turns on, the screen is blank when connecting the RF cable. Major checkpoints - Check the RF cable connections. - Check whether the LVDS cable is connected correctly to the panel. - Check whether the lamp connector of the panel is connected correctly to the IP board.

TU6001

Main Board Front Diagnostics Power Indicator is off. Lamp on, no picure. Yes Does the signal appear at L6001? Yes Does the signal appear at #9 of TU6001? Yes Does the digital data appear at output of RA5008 ~RA5012? Yes Check a LVDS cable? Replacea lcd panel? Caution No Please, Call to Samsung Co. LTD. No Check a IC5002. Change a main PCB assy. No Change a main PCB assy. No Check the Tuner Vcc 5V. Change a main PBA. No Connect the RF cable and check RF signal.

Make sure to disconnect the power before working on the IP board.

4-10

4. Troubleshooting

4-5-1. Circuit diagrams and waveforms (Tuner_CVBS) when no screen is displayed on the monitor

4-11

4. Troubleshooting

4-5-2. Waveforms when a blank screen is displayed (Tuner_CVBS)


CVBS Output Signal Tuner_CVBS Output Signal

4-12

4. Troubleshooting

4-6. No Picture (Tuner_DTV)


Symptom - The LED power turns on but the screen is blank when the Antenna Cable is connected. - Even though the LED power turns on, the screen is blank when connecting the Antenna Cable. Major checkpoints - Check the Antenna Cable connections. - Check whether the LVDS cable is connected correctly to the panel. - Check whether the lamp connector of the panel is connected correctly to the IP board.

Diagnostics Power Indicator is off. Lamp on, No signal image. Yes Does the signal appear at #16~25of TU6001? Yes Does the digital data appear at #1,3,5 of IC4001? Yes Check a LVDS cable? Replace lcd panel? Caution

Main Board Front No check antenna cable

No

check antenna cable Change a main PBA

No

Change a main PBA

No

Please, Call to Samsung Co. LTD.

Make sure to disconnect the power before working on the IP board.

4-13

4. Troubleshooting

4-6-1. Circuit diagrams and waveforms (Tuner_DTV) when no screen is displayed on the monitor

4-14

4. Troubleshooting

4-6-2. Waveforms when a blank screen is displayed (Tuner_DTV)


CVBS Output Signal

4-15

4. Troubleshooting

4-7. No Sound
Symptom - The LED power turns on but the screen is blank when the DVI cable is connected. - Even though the LED power turns on, the screen is blank when connecting the DVI cable. Major checkpoints - Check the DVI cable connections. - Check whether the LVDS cable is connected correctly to the panel. - Check whether the lamp connector of the panel is connected correctly to the IP board.

IC5002

IC2005

Main Board Front Diagnostics Picture is display, no sound. Yes Does the signal appear at Pin #71,72,73,74,76,77,78,79 of IC5002? Yes Check the 3.3V of #25 IC2005. Yes check output signal of #36,37,31,30,54,53,48,47 of IC2005 Yes Replace the speaker assy? No check IC2005. No check IC2003. Change a main PBA. No Check a connection harness. No Connect a sound cable. control a volume.

Caution

Make sure to disconnect the power before working on the IP board.

4-16

5.6V VLZ5V6B
A3.3V

2
R2074 D2022 D2023
100NF 25V
A3.3V_SIF A3.3V_ADC

S_AMP_MUTE
1
A13V
1 1 57 58 59 60 61 62 63 64

R2021

AMP_RESET
2 1
C5088 1UF 10V

1KOHM 1/10W VLZ5V6B 5.6V


C5087 4.7UF 10V

VCOM0 AVDD_ADC CVBSOUT1 CVBSOUT0 GND SIF0P AVDD_SIF SIF1P

FGND

1
1
C5086

AUSD AUWS AUSCK SDA1 SCL1

2 C2015 1

CLOSE TO IC
2
FGND FGND

2
1 1 1 1 1 1 1 1
FGND R5065 1 C50771 C50781 C50791 C50801 C50811 C50821 C50831 C50841 C50851
RA5028

/RESET,RESET 3 VDD GND

B1.8V_AMP

1 C2042 2

10UF 10V

10KOHM 1/10W

R2028

10UF 10V

RT9818C-42PV

IC2003

C2018

1 R2017 2 1UF 1

100OHM 1/10W C2012 100PF 50V

1NF 50V 3.3KOHM 1/10W C2019

A3.3V

FGND

B3.3VD

LL4148 75V
B12VS

1
B E C
HP_OUT_L1 HP_OUT_R1

3
4.7KOHM 1/10W
IDENT_SIDE_SVHS

R5067 R5068 R5015_DE R5014_DE R5013_DE

BD2001

BEAD_CHIP

1 C2008 2

22NF 50V

/RESET

DVDDPLL

AVDDPLL

AGNDPLL

DGNDPLL

B1.8V_AMP

RA5029

DVSS

PGND1A

C2003 220UF 35V

2 C2082 1 2 2 1

R2073_DE

Q2004 KTC3875S-Y

1 R2027 2

10KOHM 1/10W

0OHM 1/10W

LL4148 75V

CLOSE TO IC

AMP_MUTE

L2002
1NF50V 1NF 50V

4 1 1
BD2002
BEAD_CHIP BEAD_CHIP

R2024 R2025

22KOHM 1/10W

C2026

Q2003 22KOHM 1/10W KTC3875S-Y

POP NOISE SOLUTION

4-7-1. Circuit diagrams and waveforms (No Sound) when no screen is displayed on the monitor

CLOSE TO IC

CLOSE TO IC

1NF 50V

DDA-0808 C2033

4.7OHM 1/10W

1 C2034 2 1 R2007 2

R2011

4.7OHM 1/10W

2 C2032 1 2 C2031 1

470NF 50V

100NF 50V

SPK_L

100NF 50V

C2029

100NF 50V

12

C2030

SPK_L SPK_L_

2 R2010 1 2 R2009 1

100NF 50V

C2027

4.7KOHM 1/10W

2 1

4.7KOHM 1/10W

C2028

CHASSIS GND

1NF 50V

1NF 50V

FGND

DVDD

PGND1A

100OHM 100OHM
A3.3V_VDDP
RA5032 RA5030

100NF 25V

SDATA

OUT1A

WCK

OUT1A

C2004

C2083 33PF 50V

BCK

PVDD1A

SDA

PVDD1A

NTP-3000

1 1

2 2

FGND

SCL

PVDD1B

100NF 25V

MGND1

AUX_PWM3B

PVDD1B

1 C2005

IDENT_COMP IDENT_DVI IDENT_PC SEL1_HDMI IDENT_HDMI2 IDENT_HDMI1 IDENT_HP SW_POWER 7 5 3 1 7 5 3 1


RA5033_DE

R5009
VDDC

1 1 1 1 1 8 6 4 2 8 6 4 2 1

IC2005

C2081 33PF 50V

1 C2023 2

AUX_PWM3A

OUT1B

1UF 10V

PWM_MASK_2

OUT1B

100NF 25V

SOFT_RESET_2

PGND1B

DQS1 MDATA(0:15)
15 MDATA<15> 14 MDATA<14>

22NF 50V

C2006

VDR2B

PGND1B

BST2B

BST1B

15 16 17 18 19 20 21 22 23 24 25 26 27 28 1

CLOSE TO IC

8 6 4 1/16W 2 10KOHM 8 6 4 1/16W 2

10KOHM

C2001

1NF 50V

D2009

1NF 50V

MDATA(0:15)

1 C2007 2

CLOSE TO IC

1 C2043 2
R2002 4.7OHM 1/10W

LL4148 75V

PGND2B

VDR1B

56 55 54 53 52 51 50 49 48 47 46 45 44 43 2 1

1UF 10V

LL4148 75V

13 MDATA<13> 12 MDATA<12>
A3.3V

1 C2002 2 1 R2003 2

4.7OHM 1/10W

FGND

100NF 25V

D2007

22NF 50V C2024

2 2

C2009

D2008

1UF

10V

11 MDATA<11> 10 MDATA<10> 9 MDATA<9> 8 MDATA<8>

1 4 1
1NF 50V

C2010

22NF 50V

L2001
1 C2079 2 2
DDA-0808

7 6 5 4

MDATA<7> MDATA<6> MDATA<5> MDATA<4>

65 66 67 68 69 70 2 4.7UF 10V 71 2 4.7UF 10V 72 2 4.7UF 10V 73 2 4.7UF 10V 74 2 100NF 25V 75 2 4.7UF 10V 76 2 4.7UF 10V 77 2 4.7UF 10V 78 2 4.7UF 10V 79 80 81 82 83 84 2 100OHM 85 2 100OHM 86 87 2 100OHM 88 2 100OHM 89 2 100OHM 90 7 91 5 92 3 93 1 94 7 95 5 96 3 97 1 98 2 100OHM 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119
C5100 R5081 C5101 R5078 C5091 R5074 C5094 R5076
A3.3V_AU

100NF 25V C2016

2 C2080 1 1
470NF 50V

1 C2039 2 1 R2006 2

1NF 50V 4.7OHM 1/10W

FGND

4.7OHM 1/10W

C2025

FGND

A3.3V

CLOSE TO IC

1 C2035 2 1 R2008 2

1NF 50V

2 2

2 C2076 1 2 C2075 1

R2070

1
B E C

3
4.7KOHM 1/10W

100NF 50V 100NF 50V C2078 C2077

C2038 220UF 35V

12

100NF 50V R2005

4.7OHM 1/10W

R2012

12

100NF 50V R2004

AMP_MUTE

4.7OHM 1/10W

CHASSIS GND

1 C2041 2 1 C2040 2

4.7KOHM 1/10W

4.7KOHM 1/10W

1
B E

3
C

Q2001 KTC3875S-Y

1 1 1 1

FGND

3
B E C

1 3 5 7

2 4 6 8

DVDD_PLL

AVDD_PLL

2 C2014 1

100NF 25V

2 2.2NF 50V 2 22KOHM 1/10W 2 2.2NF 1/10W 2 22KOHM 50V

2 2.2NF 50V 2 22KOHM 1/10W 2 2.2NF 50V 2 22KOHM 1/10W

100PF 50V

1 C2013 2

2 C2011 1

2 1/10W 2

2 C2017 1

10UF10V

D2006

D2004_DE

1 2

560OHM 1/10W

11

LL4148 75V

2
300OHM
2
C5089 10UF 10V

R2020 1

22
2

AUMCKO

DVDD_PLL

TP2001

BEAD_CHIP

BD2006

BD2005

BEAD_CHIP

FGND

AVDD_PLL

100OHM 1

PC_SL_IN PC_SR_IN COMP_SL_IN COMP_SR_IN 2 0OHM1/10W DTV_AUDIO_L DTV_AUDIO_R SC_SL_IN SC_SR_IN


100OHM

R2014

2 1

21

1KOHM 1/10W R2015

100NF

R2069

SC_SL_OUT2 SC_SR_OUT2

R2016

25V

10V

2 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14

AD

LFM

VDD_

VSS_

CLK_

CLK_

TEST0

VDR1A

BST1A

PVDD2B

PVDD2B

PVDD2A

PVDD2A

PGND2A

PGND2A

OUT2B PGND2B

OUT2B

OUT2A

OUT2A

BST2A

VDR2A

NC

42 41 40 39 38 37 36 35 34 33 32 31 30 29

FGND

SIFM GND AUVREADN AUVRADP AUVREF AVDD_AU AUL0 AUR0 AUL1 AUR1 AUCOM AUL2 AUR2 AUL3 AUR3 AUMONO AUOUTL3 AUOUTR3 AUOUTL2 AUOUTR2 AUOUTL1 AUOUTR1 AUOUTL0 AUOUTR0 GPIOF[0] GPIOF[1] GPIOF[2] GPIOF[3] GPIOF[4] GPIOF[5] GPIOF[6] GPIOF[7] GPIOF[8] GPIOF[9] VDDP GND VDDC DQS[1] MDATA[15] MDATA[14] GND MDATA[13] MDATA[12] VDDM MDATA[11] MDATA[10] MDATA[9] MDATA[8] GND VDDM MDATA[7] MDATA[6] MDATA[5] MDATA[4] VDDM

R2013

0OHM 1/10W

R2001

FGND

1NF 50V

1 C2036 2

100NF 25V 2 1

100NF 25V C2037

FGND

FGND

BEAD_CHIP

BD2004

B12VS

FGND BD2003

1NF 50V

2 2 2

FGND

FGND

SPK_R SPK_R_ SPK_L SPK_L_

1
SPK_R+ SPK_RSPK_L+ SPK_L-

BEAD_CHIP

BD2008

BD2007

BEAD_CHIP

SPK_OUT

FGND

2 1 2 3 4
CN_S_004

SPK_R

4. Troubleshooting

Q2002 KTC3875S-Y

CN2001

SPK_R_

SPK_R

SC_SR_OUT SC_SL_OUT

4-17

4. Troubleshooting

4-7-1. Waveforms when a blank screen is displayed (No Sound)


The Signal are Inputed to IC5002 DC 3.3V

4-18

4. Troubleshooting

4-8. Faults and Corrective Actions


Fault Photo Symptoms and Corrective Actions Symptoms: DVI signals are not recognized. Remarks * Refer to the Training Manual for information on inputting the DVI DDC.

Causes: This fault occurs when the PC does not recognize the mode information because the DVI DDC has not been input to the monitor. Corrective Actions: Input the DVI DDC to the monitor. Symptoms:  When the monitor is turned on, only a full white pattern is displayed continually regardless of the signals. Causes: This fault occurs when only the lamp power is supplied and no video signals are input to the panel due to a fault or incorrect connections of the LVDS cable. Corrective Actions: R  eplace or reconnect the LVDS cable correctly so that video signals can be supplied to the panel. Symptoms:  When connecting the DVD, noise occurs on the screen. Causes: The HDCP key is not inserted. Corrective Actions:  Enter the HDCP key. (See page 4-17.)

* A full white pattern is a feature of the TN panel and is displayed when no video signals are supplied.

4-19

4. Troubleshooting

4-9. Adjustment
4-9-1. Service Instruction
1.  Usually, a color TV-VCR needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. 2. Use the specified test equipment or its equivalent. 3. Correct impedance matching is essential. 4.  Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV. When inserting signal markers, do not allow the marker generator to distort test result. 5. Connect the TV only to an AC power source with voltage and frequency as specified on the backcover nameplate. 6.  Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure that the power cord is disconnected before replacing any parts. 7. To protect aganist shock hazard, use an isolation transform.

4-10. How to Access Service Mode 4-10-1. Entering Factory Mode


2.  To enter Service Mode Press the remote -control keys in this sequence : - If you do not have Factory remote - control Power OFF PICTURE ON INFO INFO MENU FACTORY MUTE Power ON

- If you have Factory remote - control

- The buttons are active in the service mode. 1. Remote - Control Key : Power, Arrow Up, Arrow Down, Arrow Left Arrow Right, Menu, Enter, Number Key(0~9) 2. Function - Control Key : Power, CH +, CH -, VOL +, VOL -, Menu, TV/VIDEO(Enter)

4-20

4. Troubleshooting

4-11. Service Adjustment


4-11-1. White Balance - Calibration
If picture color is wrong, do calibration first. Equipment : CA210, Patten : chess pattern Execute calibration in Factory Mode Source AV : PAL composite, Component : 1280*720/60Hz PC : 1024*768/60Hz

(Gray patten)

4-11-2. White Balance - Adjustment


If picture color is wrong, check White Balance condition. Equipment : CA210, Patten : Toshiba Adjust W/B in Factory Mode Sub brightness and R/G/B Offset controls low light region Sub contrast and R/G/B Gain controls high light region Source AV :  PAL composite, Component : 1280*720/60Hz HDMI[DVI] : 1280*720/60Hz [ Test Pattern : MSPG-945 Series Pattern #16 ] *Color temperature 1500K +/-500, -6 ~-20 MPCD *Color coordinate H/L : 267/263 +/- 2 35.0 Ft +/- 2.0Ft L/L : 270/260 +/- 3 1.5 Ft +/- 0.2Ft Toshiba Patten

4-11-3. Conditions for Measurement


1.  On the basis of toshiba ABL pattern : High Light level (57 IRE) - INPUT SIGNAL GENERATOR : MSPG-925LTH * Mode  NO 2 : 744X484@60 Hz NO 6 : 1280X720@60 Hz NO 21 : 1024X768@60 Hz * Pattern NO 36 : 16 Color Pattern NO 16 : Toshiba ABL Pattern 2. Optical measuring device : CA210 (FL) Please use the MSPG-925 LTH generator for model LE26M51B/LE32M51B/LE40M51B/LE46M51B.

4-21

4. Troubleshooting

4-11-4. Method of Adjustment


1.  Adjust the white balance of AV, Component and DVI Modes. (AVComponent) a)  Set the input to the mode in which the adjustment will be made. (RFDTVPCDVI). * Input signal  - VIDEO Mode : Model #2 (744*484 Mode), Pattern #16 - DTV,DVI Mode : Model #6 (1280*720 Mode), Pattern #16 - HDMI Mode: Model #6(1280*720 Mode), Pattern #16 b) Enter factory color control, confirm the data. c)  Adjust the low light. (Refer to table 1, 2 in adjustment position by mode) - Adjust sub - Brightness to set the Y value. - Adjust red offset (x) and blue offset (y) to the color coordinates.

Low light Measurement point Picture 4-2 Toshiba ABL Pattern * Do not adjust green offset data. d)  Adjust the high light. (Refer to table 1, 2 in adjustment position by mode) - Adjust red gain (x) and blue gain (y) to the color coordinates. * Do not adjust the green gain and sub-contrast (Y) data. d)  Adjust the high light. (Refer to table 1, 2 in adjustment position by mode) - Adjust red gain (x) and blue gain (y) to the color coordinates. * Do not adjust the green gain and sub-contrast (Y) data. Low light Measurement point

Picture 4-3 Toshiba ABL Pattern

4-22

4. Troubleshooting

4-12. Software Upgrade 4-12-1. How to Update Flash ROM


1.  Install the Flash Downloader Connector Set(D-SUB) and D-SUB cable to execute Program Update.

2.  Flash Downloader program update - Turn on the TV Set - Click Connect icon on the MSTAR tool. - Click Read, and Choose a new S/W. - Click Auto, and Run

4-23

4. Troubleshooting

Memo

4-24

You might also like