Pulsation damper Siphons Connector MIP10 Pressure gauge class 1. Alternative measurement system - covers several measurement media in practical operations. Long life and high reliability through specially treated spring material and robust mechanism of stainless steel.
Pulsation damper Siphons Connector MIP10 Pressure gauge class 1. Alternative measurement system - covers several measurement media in practical operations. Long life and high reliability through specially treated spring material and robust mechanism of stainless steel.
Pulsation damper Siphons Connector MIP10 Pressure gauge class 1. Alternative measurement system - covers several measurement media in practical operations. Long life and high reliability through specially treated spring material and robust mechanism of stainless steel.
Alternative measurement system covers several measu-
rement media in practical operations.
Long life and high reliability through specially treated
spring material and robust mechanism of stainless steel. Accessories Pressure transducer Gauge pulsation damper Siphons Connector MIP10 Pressure gauge class 1.0 100% Measurement system Pressure limits Installation* Connection Designation Material standard Tubular spring: C type bronze Overpressure: lowest 060 kPa 2 R 3/8 4112-3 Spring mounting: brass max. 06 MPa 2 R 1/2 4112-4 Joint: soldered Underpressure: 1000 kPa 5 R 3/8 4115-3 Over- and min. -10060 kPa 5 R 1/2 4115-4 underpressure: max 10001500 kPa 7 R 3/8 4117-3 7 R 1/2 4117-4 Tubular spring: C type/Screw Overpressure: min. 0-100 kPa 2 R 3/8 4312-3 ss SS 2343 max. 0160 MPa 2 R 1/2 4312-4 Spring mounting: ss SS 2343 Underpressure: 1000 kPa 5 R 3/8 4315-3 Joint: welded ss Over- and min. -100060 kPa 5 R 1/2 4315-4 underpressure: max 10001500 kPa 7 R 3/8 4317-3 7 R 1/2 4317-4 Overpressure > 10 MPa = Screw type * Installation 2 = free-standing, stud downwards. 5 = surface mounted, flange at rear edge, stud downwards. 7 = recessed flange at front edge, stud backwards, with bracket. Technical specification Size 100 mm, see figure below. Measurement C type bourdon tube, bronze or system/ stainless steel AIS 316. See table Material page 1. Pressure limits For respective measurement systems, see table page 1. Mechanism Stainless steel. Scale Centric scale on white background, black graduation and text, 270 deflection of pointer and scale length 180 mm. Graduation The gauge is supplied as standard graduated in Pascal with the second- ary scale in bar on a yellow back- ground (Yellow points). Single gradua- tion in Pascal or bar is available. The standard scale range can be found on data sheet 493-1040-01 (min. and max. for respective measurement systems, see table on page 1). Inaccuracy Max. deviation 1% of the scale range. Load capacity Permitted load 100% at stable working pressure, 88% at variable working pressure. Overload 130% of the scale range. Housing Blue zinc-plated sheet steel housing. Front ring Black zinc/plated sheet steel front- ring, bayonet fitting. Glass Lexan 121R, Polycarbonate. Installation See below. Connection Standard R 3/8 and R 1/2, fitted with restrictor from 06 MPa and higher. Working Max. +100C (with soldered temperature measurement system max. +50C). Weight Approx. 0.5 kg. Order example MIP10-4112-3 Size: 100 mm Scale range: 01 MPa/010 bar Connection: R 3/8 Specifications subject to change without notice. Printed in Sweden. 2000 ABB Automation Products AB. 493-1003-11 0011 v.2.2 ABB Instrumentation a unit within ABB Automation Products AB SE-147 80 Tumba, Sweden. Tel: +46 8 530 661 00 Fax: +46 8 530 666 89 www.abb.com/se Panel cut-out 102+2 5 2 7 Installation method and connection standard. R 1 /2 3 20 88 6.0 R 3 /8 3 16 84 5.5 d f g h j 33 65R 3/8 69R 1/2 53 110 33 13 110 19.5 N17 j d f g h 134 118 6.0 46 5.5