Huawei RAN One Tunnel Feature Parameter Description Issue 01 (2013-04-28) No part of this document may be reproduced or transmitted without prior written consent of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Information in this document is subject to change without notice.
Huawei RAN One Tunnel Feature Parameter Description Issue 01 (2013-04-28) No part of this document may be reproduced or transmitted without prior written consent of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Information in this document is subject to change without notice.
Huawei RAN One Tunnel Feature Parameter Description Issue 01 (2013-04-28) No part of this document may be reproduced or transmitted without prior written consent of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Information in this document is subject to change without notice.
Description Issue 01 Date 2013-04-28 HUAWEI TECHNOLOGIES CO., LTD.
Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. i Contents 1 Introduction....................................................................................................................................1 1.1 Scope..............................................................................................................................................................................1 1.2 Intended Audience..........................................................................................................................................................1 1.3 Change History...............................................................................................................................................................1 2 Overview.........................................................................................................................................3 3 Technical Description...................................................................................................................6 3.1 Working Principles.........................................................................................................................................................6 3.2 Impact on NEs and Interfaces.........................................................................................................................................7 3.2.1 Impact on the RNC......................................................................................................................................................8 3.2.2 Impact on the SGSN, GGSN, and S-GW....................................................................................................................8 3.2.3 Impact on Interfaces....................................................................................................................................................8 4 Related Features.............................................................................................................................9 5 Impact on the Network...............................................................................................................10 6 Engineering Guidelines.............................................................................................................11 6.1 When to Use One Tunnel.............................................................................................................................................12 6.2 Information to Be Collected.........................................................................................................................................12 6.3 Network Planning.........................................................................................................................................................12 6.4 Deployment..................................................................................................................................................................12 6.4.1 Deployment Requirements........................................................................................................................................12 6.4.2 Data Preparation........................................................................................................................................................13 6.4.3 Precautions.................................................................................................................................................................14 6.4.4 Feature Activation.....................................................................................................................................................14 6.4.5 Activation Observation..............................................................................................................................................15 6.4.6 Deactivation...............................................................................................................................................................17 6.4.7 Example.....................................................................................................................................................................17 6.5 Parameter Optimization................................................................................................................................................17 6.6 Troubleshooting............................................................................................................................................................17 6.6.1 Iu-PS in Non-pooled Mode........................................................................................................................................17 6.6.2 Iu-PS in Pooled Mode................................................................................................................................................17 7 Parameters.....................................................................................................................................19 WCDMA RAN One Tunnel Feature Parameter Description Contents Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. ii 8 Counters........................................................................................................................................33 9 Glossary.........................................................................................................................................34 10 Reference Documents...............................................................................................................35 WCDMA RAN One Tunnel Feature Parameter Description Contents Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. iii 1 Introduction 1.1 Scope This document describes WRFD-020111 One Tunnel, including its technical principles, related features, network impact, and engineering guidelines. 1.2 Intended Audience This document is intended for personnel who: l Need to understand the features described herein l Work with Huawei products 1.3 Change History This section provides information about the changes in different document versions. There are two types of changes, which are defined as follows: l Feature change Changes in features of a specific product version l Editorial change Changes in wording or addition of information that was not described in the earlier version 01 (2013-04-28) This issue does not include any changes. Draft A (2013-01-30) Compared with Issue 02 (2012-07-20) of RAN14.0, Draft A (2013-01-30) of RAN15.0 includes the following changes. WCDMA RAN One Tunnel Feature Parameter Description 1 Introduction Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1 Change Type Change Description Parameter Change Feature change None None Editorial change Optimized the description of One Tunnel between the RNC and GGSN. For details, see 2 Overview. None WCDMA RAN One Tunnel Feature Parameter Description 1 Introduction Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 2 2 Overview Since packet-switched (PS) services in Wideband Code Division Multiple Access (WCDMA) networks are booming and the High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) techniques are now widely applied, network operators are more and more interested in finding more efficient ways to process PS user-plane data and reduce the user-plane delay. One Tunnel, available since 7.2 Tunnel Management Messages in 3GPP TS29.274 V10.5.0, is ideal for addressing this issue. The One Tunnel feature allows user-plane data to be transmitted between the RNC and GGSN through a single tunnel. As a result, the user-plane data does not need to go through two tunnels, which are between the RNC and the Serving GPRS Support Node (SGSN) and between the SGSN and GGSN, separately. With One Tunnel, user-plane data does not pass through the SGSN although control-plane data still passes through the SGSN. Figure 2-1 shows how One Tunnel works for data transmission between the RNC and GGSN. Figure 2-1 Data transmission between the RNC and GGSN when One Tunnel is applied WCDMA RAN One Tunnel Feature Parameter Description 2 Overview Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 3 NOTE In the figure, the solid blue line indicates the tunnel for user-plane data and the dotted blue lines indicate the tunnels for control-plane data. In UMTS and LTE (UL) interoperability scenarios, the S-GW serves as the anchor point for PS user-plane data. By using the S12 interface introduced in 7.2 Tunnel Management Messages in 3GPP TS29.274 V10.5.0, a direct tunnel for transmitting PS user-plane data can be established between the RNC and S-GW. This tunnel is referred to as S12 One Tunnel. With S12 One Tunnel, user-plane data does not pass through the SGSN although control-plane data still passes through the SGSN. Figure 2-2 shows how S12 One Tunnel works for data transmission between the RNC and S-GW. Figure 2-2 Data transmission between the RNC and S-GW when S12 One Tunnel is applied NOTE In the figure, the solid blue lines indicate the tunnels for user-plane data and the dotted blue lines indicate the tunnels for control-plane data. The SGSN determines whether the One Tunnel feature is used. In addition, the SGSN checks whether the interface is the Gn/Gp interface or the S4 interface to determine whether the data should be sent to the S-GW or the GGSN. The GGSN sends the IP address and tunnel endpoint identifier (TEID) of the GGSN or S-GW to the RNC using the RAB Assignment Request message. The RNC only needs to send the data about this service connection to the IP address and TEID specified in the RAB Assignment Request message. One Tunnel applies to IP over Iu-PS networking and provides the following benefits: l Reduced capital expenditure and operating expense. One Tunnel enables operators to reduce the expenses related to SGSN user-plane resources. WCDMA RAN One Tunnel Feature Parameter Description 2 Overview Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 4 l Easier capacity expansion. Operators only need to expand the user-plane capacity of the RNC and GGSN or S-GW to process more PS traffic. In comparison with the SGSN, these devices are easier to upgrade and expand. WCDMA RAN One Tunnel Feature Parameter Description 2 Overview Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 5 3 Technical Description 3.1 Working Principles In WCDMA networks, the PS user-plane data normally needs to pass through the SGSN, which is connected to the GGSN and RNC through two separate tunnels. As the PS traffic volume grows, the user-plane capacity of the SGSN can easily become a bottleneck for service processing. One Tunnel solves this problem by establishing a direct tunnel between the RNC and GGSN so that PS user-plane data no longer passes through the SGSN. Figure 3-1 shows One Tunnel between the RNC and GGSN. Figure 3-1 One Tunnel between the RNC and GGSN NOTE In the figure, the solid red lines indicate the tunnels for user-plane data and the dotted red lines indicate the tunnels for control-plane data. One Tunnel between the RNC and S-GW over the S12 interface applies to UL interoperability scenarios. With this feature, PS user-plane data is transmitted between the RNC and S-GW WCDMA RAN One Tunnel Feature Parameter Description 3 Technical Description Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 6 without passing through the SGSN. As a result, the increased PS traffic volume does not impose any burden on the SGSN. One Tunnel complies with the GPRS Tunneling Protocol for User Plane (GTP-U). Figure 3-2 and Figure 3-3 show the user-plane protocol stack for two-tunnel cases and One Tunnel, respectively. Figure 3-2 User-plane protocol stack for two-tunnel cases Figure 3-3 User-plane protocol stack for One Tunnel The control-plane protocol stack is the same for both two-tunnel cases and One Tunnel. Control- plane data still passes through the SGSN. With or without One Tunnel, the SGSN is responsible for mobility management. For example, when a UE roams to an area served by another RNC, the SGSN changes the user-plane tunnel between the RNC and GGSN or S-GW. For BSC6900, the SGSNFLG parameter specifies whether to use One Tunnel. Value NO indicates One Tunnel is used and value YES indicates One Tunnel is not used. 3.2 Impact on NEs and Interfaces WCDMA RAN One Tunnel Feature Parameter Description 3 Technical Description Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 7 3.2.1 Impact on the RNC In RAN14.0, a new feature Transmission Resource Pool in RNC/BSC is available. With this feature, the Iu-PS interface works in either pooled mode or non-pooled mode. One Tunnel has different requirements for each of these modes: l When Iu-PS works in non-pooled mode, an IP path between the RNC and GGSN or S-GW must be configured, and the Ping detection function needs to be enabled on this IP path. l When Iu-PS works in pooled mode, One Tunnel has no impact on the RNC. When Iu-PS works in pooled mode, the Iu-PS interface boards form a pool and peer network elements (NEs) can be connected to any of the boards in the pool. This scenario does not require IP paths between the RNC and connected peer NEs. For more details, see the Transmission Resource Pool in RNC Feature Parameter Description. 3.2.2 Impact on the SGSN, GGSN, and S-GW Impact on the SGSN l The SGSN configurations must support One Tunnel between the RNC and GGSN or S- GW. l The RAB ASSIGNMENT REQUEST messages from the SGSN must carry the IP address of the GGSN or S-GW. Impact on the GGSN The GGSN must support One Tunnel. Impact on the S-GW The S-GW must support the S12 interface. 3.2.3 Impact on Interfaces One Tunnel affects the Iu-PS interface as follows: l The IP address of the SGSN for user-plane data transmission in the RAB ASSIGNMENT REQUEST messages must be replaced with the IP address of the GGSN or S-GW for user- plane data transmission. l The number of Iu-PS signaling points remains unchanged. WCDMA RAN One Tunnel Feature Parameter Description 3 Technical Description Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 8 4 Related Features Required Features WRFD-050409 IP Transmission Introduction on Iu Interface Mutually Exclusive Features None Impacted Features None WCDMA RAN One Tunnel Feature Parameter Description 4 Related Features Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 9 5 Impact on the Network System Capacity No impact. Network Performance No impact. WCDMA RAN One Tunnel Feature Parameter Description 5 Impact on the Network Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 10 6 Engineering Guidelines Note that the engineering guidelines for Iu-PS in pooled mode are different from those for Iu- PS in non-pooled mode. WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 11 6.1 When to Use One Tunnel Note that the engineering guidelines for Iu-PS in pooled mode are different from those for Iu- PS in non-pooled mode. 6.2 Information to Be Collected For Iu-PS in non-pooled mode, the IP address of the GGSN or S-GW must be obtained. For Iu-PS in pooled mode, no information needs to be collected. 6.3 Network Planning Network Topology The Iu-PS interface must use IP transmission, and the RNC, SGSN, and GGSN (or S-GW) must be connected. Hardware Planning No hardware planning is required. 6.4 Deployment 6.4.1 Deployment Requirements l Dependencies on Other Features WRFD-050409 IP Transmission Introduction on Iu Interface l License The license " One Tunnel " on the RNC side has been activated. For details about how to activate the license, see License Management Feature Parameter Description. Feature ID Feature Name License Control Item NE Sales Unit WRFD- 020111 One Tunnel One Tunnel RNC Mbps
l The peer devices must meet the following requirements: To support One Tunnel between the RNC and GGSN, the GGSN and SGSN must support One Tunnel. To support One Tunnel between the RNC and S-GW, the S-GW must support the S12 interface. WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 12 l Others The Iu-PS control-plane data must be configured. 6.4.2 Data Preparation For Iu-PS in pooled mode, no data preparation is required. For Iu-PS in non-pooled mode, data related to the Iu-PS adjacent node and IP path needs to be prepared.Table 6-1 and Table 6-2 list the related parameters. The GGSN is the adjacent node for One Tunnel between the RNC and GGSN, and the S-GW is the adjacent node for S12 One Tunnel. In the following tables, "-" indicates that there are no special requirements for data configuration and users can configure the data as needed. Table 6-1 Parameters related to the adjacent node (in the ADD ADJNODE command) Parameter Name Parameter ID Description Data Source Adjacent Node ID ANI (BSC6900,BSC6910 ) - Internal plan Adjacent Node Name NAME (BSC6900,BSC6910 ) - Adjacent Node Type NODET (BSC6900,BSC6910 ) Set this parameter to IUPS. SGSN FLAG SGSNFLG Set this parameter to NO. Transport Type TRANST (BSC6900,BSC6910 ) Set this parameter to IP.
Table 6-2 Parameters related to the IP path (in the ADD IPPATH command) Parameter Name Parameter ID Description Data Source Adjacent Node ID ANI - Internal plan IP path ID PATHID - Interface Type ITFT Set this parameter to IUPS. IP path type PATHT - Network plan Local IP address IPADDR - WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 13 Parameter Name Parameter ID Description Data Source Peer IP address PEERIPADDR - Forward Bandwidth TXBW - Backward Bandwidth RXBW -
6.4.3 Precautions None. 6.4.4 Feature Activation Note that the feature activation/initial configuration for Iu-PS in pooled mode is different from that for Iu-PS in non-pooled mode. NOTE This feature cannot be configured using the CME. Iu-PS in Non-pooled Mode Perform the following steps to activate or initially configure One Tunnel between the RNC and GGSN: Step 1 Run the ADD ADJNODE command to add the GGSN as the adjacent node. In this step, set parameters as follows: l Set Adjacent Node Type to IUPS so that the node type is set to Iu PS. l Set Transport Type to IP so that the transport type is IP. l Set SGSN FLAG to NO. Depending on the configured adjacent node, set the parameter to GGSN or S-GW. Step 2 Run the ADD IPPATH command to add a user-plane IP path. In this step, set the PEERIPADDR parameter to the IP address of the GGSN or S-GW. Step 3 Optional: If layer 3 networking is deployed between the RNC and the peer node, run the MML command ADD IPRT to add an IP route. ----End NOTE On the SGSN, GGSN, or S-GW side, you can run associated commands to check whether the feature One Tunnel is supported. The feature activation procedure for One Tunnel between the RNC and S-GW is the same as that for One Tunnel between the RNC and GGSN for Iu-PS in non-pooled mode. The first step can be skipped if the license has been activated for One Tunnel between the RNC and GGSN. This is because One Tunnel between the RNC and S-GW uses the same license as One Tunnel between the RNC and GGSN. WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 14 Iu-PS in Pooled Mode The feature does not need to be activated. 6.4.5 Activation Observation Iu-PS in Non-pooled Mode Perform the following steps to check whether One Tunnel has been activated: Step 1 On the LMT, start signaling tracing over the Iu interface. For details, see Tracing Messages on the Iu Interface. Figure 6-1 Setting Iu interface tracing Step 2 Use a UE to start a PS service. Step 3 In the Iu interface tracing data, check the information element transportLayerAddress in the RANAP_RAB_ASSIGNMENT_REQ message. Figure 6-2 Iu interface tracing Step 4 If the value of the information element transportLayerAddress is the IP address configured for the GGSN or S-GW during transmission resources configuration, this feature has been activated. WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 15 Figure 6-3 IP address configured for the GGSN or S-GW ----End Alternatively, you can analyze the counters related to traffic flow and packet loss conditions on the IP path to check the running status of One Tunnel. Table 6-3 lists the related counters. Table 6-3 Counters related to traffic flow and packet loss conditions on the IP path Counter Name Description VS.IPPATH.IPLAYER.TXPACKETS Number of Packets Transmitted at the IP Layer of an IP Path VS.IPPATH.IPLAYER.TXBYTES Number of Bytes Transmitted at the IP Layer of an IP Path VS.IPPATH.IPLAYER.TXDROPPACK- ETS Number of Packets Discarded in Transmission at the IP Layer of an IP Path VS.IPPATH.IPLAYER.TXDROPBYTES Number of Bytes Discarded in Transmission at the IP Layer of an IP Path VS.IPPATH.IPLAYER.RXPACKETS Number of Packets Received at the IP Layer of an IP Path VS.IPPATH.IPLAYER.RXBYTES Number of Bytes Received at the IP Layer of an IP Path VS.IPPATH.IPLAYER.RXDROPPACK- ETS Number of Packets Discarded in Reception at the IP Layer of an IP Path VS.IPPATH.IPLAYER.RXDROPBYTES Number of Bytes Discarded in Reception at the IP Layer of an IP Path VS.IPPATH.IPLAYER.PEAK.TXRATE Maximum Transmit Rate of an IP Path at the IP Layer VS.IPPATH.IPLAYER.MEAN.TX Mean Transmit Rate of an IP Path at the IP Layer VS.IPPATH.IPLAYER.PEAK.RXRATE Maximum Receive Rate of an IP Path at the IP Layer VS.IPPATH.IPLAYER.MEAN.RX Mean Receive Rate of an IP Path at the IP Layer WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 16
Iu-PS in Pooled Mode Perform the following step to check whether One Tunnel has been activated: Step 1 Run the DSP ADJNODE command and enter the adjacent node ID of the SGSN. The expected result is that Operation state is Available. ----End 6.4.6 Deactivation For Iu-PS in non-pooled mode, you can also run the RMV ADJNODE command with ANI (BSC6900,BSC6910) set to the adjacent node ID of the GGSN or S-GW to deactivate One Tunnel.Example 6.4.7 Example //Activation procedure: //Adding an adjacent node ADD ADJNODE: ANI=0, NAME="S-GW NAME", NODET=IUPS, TRANST=IP, ISIPPOOL=NO, SGSNFLG=NO; /Adding an IP path for the adjacent node ADD IPPATH: ANI=0, PATHID=1, ITFT=IUPS, PATHT=BE, IPADDR="80.1.1.1", PEERIPADDR="10.161.0.1", PEERMASK="255.255.255.0", TXBW=1000, RXBW=1000; //Adding a layer 3 route to this adjacent node ADD IPRT: SRN=0, SN=14, DSTIP="10.161.0.1", DSTMASK="255.255.255.0", NEXTHOP="80.1.1.10", PRIORITY=HIGH, REMARK="TO S-GW ROUTE";
//Deactivation procedure: RMV ADJNODE: ANI=0; 6.5 Parameter Optimization None. 6.6 Troubleshooting 6.6.1 Iu-PS in Non-pooled Mode For Iu-PS in non-pooled mode, the RNC provides the Ping detection function to check the connectivity of the IP path between the RNC and GGSN or S-GW. The ALM-21392 Adjacent Node IP Address Ping Failure is reported if the Iu-PS interface is faulty. To enable the Ping detection function, run the ADD ADJNODE command with CHECKT set to ENABLED. 6.6.2 Iu-PS in Pooled Mode For Iu-PS in pooled mode, the RNC provides the Ping detection function to check the connectivity between the RNC and GGSN or S-GW. If the transmission between the RNC and WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 17 GGSN or S-GW is faulty, the ALM-21393 Adjacent Node IP Path Ping Failure or ALM-21392 Adjacent Node IP Address Ping Failure is reported. For details about the Ping detection function in pooled mode, see the Transmission Resource Pool in RNC Feature Parameter Description. WCDMA RAN One Tunnel Feature Parameter Description 6 Engineering Guidelines Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 18 7 Parameters Table 7-1 Parameter description Parameter ID NE MML Command Feature ID Feature Name Description SGSNFLG BSC6900 ADD ADJNODE WRFD-020111 One Tunnel Meaning:This parameter specifies whether the RNC is connected to an SGSN, a GGSN, or an S-GW. This parameter is valid when the node type is set to IUPS. A parameter value YES indicates that the RNC is connected to a SGSN. A parameter value NO indicates that the RNC is connected to a GGSN or an S- GW. GUI Value Range:NO (GGSN or S- GW), YES (SGSN) Unit:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 19 Parameter ID NE MML Command Feature ID Feature Name Description Actual Value Range:NO, YES Default Value:None ANI BSC6900 ADD ADJNODE MOD ADJNODE RMV ADJNODE WRFD-050301 04 WRFD-050403 WRFD-050404 WRFD-021305 01 WRFD-140207 WRFD-140208 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Dedicated Iub Transmission Control Iu/Iur Transmission Resource Pool in RNC Iub Transmission Resource Pool in RNC Meaning:Uniqu ely identifies an adjacent node. Adjacent nodes are uniquely but not necessarily consecutively numbered within a RNC. GUI Value Range:0~65534 Unit:None Actual Value Range:0~65534 Default Value:None ANI BSC6910 ADD ADJNODE MOD ADJNODE RMV ADJNODE WRFD-050301 04 WRFD-150243 WRFD-150244 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Iub IP Transmission Based on Dynamic Load Balance Iu/Iur IP Transmission Based on Dynamic Load Balance Meaning:Uniqu ely identifies an adjacent node. Adjacent nodes are uniquely but not necessarily consecutively numbered within a RNC. GUI Value Range:0~65534 Unit:None Actual Value Range:0~65534 Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 20 Parameter ID NE MML Command Feature ID Feature Name Description NAME BSC6900 ADD ADJNODE MOD ADJNODE WRFD-050301 04 WRFD-050403 WRFD-050404 WRFD-021305 01 WRFD-140207 WRFD-140208 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Dedicated Iub Transmission Control Iu/Iur Transmission Resource Pool in RNC Iub Transmission Resource Pool in RNC Meaning:Name of the adjacent node. GUI Value Range:1~64 characters Unit:None Actual Value Range:1~64 characters Default Value:None NAME BSC6910 ADD ADJNODE MOD ADJNODE WRFD-050301 04 WRFD-150243 WRFD-150244 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Iub IP Transmission Based on Dynamic Load Balance Iu/Iur IP Transmission Based on Dynamic Load Balance Meaning:Name of the adjacent node. GUI Value Range:1~64 characters Unit:None Actual Value Range:1~64 characters Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 21 Parameter ID NE MML Command Feature ID Feature Name Description NODET BSC6900 ADD ADJNODE MOD ADJNODE WRFD-050301 04 WRFD-050403 WRFD-050404 WRFD-021305 01 WRFD-140207 WRFD-140208 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Dedicated Iub Transmission Control Iu/Iur Transmission Resource Pool in RNC Iub Transmission Resource Pool in RNC Meaning:Type of the adjacent node. GUI Value Range:IUB(Iub Interface), IUR (Iur Interface), IUCS(Iu-CS Interface), IUPS (Iu-PS Interface), UNI_AAL2SW ITCH(the adjacent node of the ATM switch on the Iub interface), NNI_AAL2SW ITCH(the adjacent node of ATM switch on Iur or Iu-CS interface) Unit:None Actual Value Range:IUB, IUR, IUCS, IUPS, UNI_AAL2SW ITCH, NNI_AAL2SW ITCH Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 22 Parameter ID NE MML Command Feature ID Feature Name Description NODET BSC6910 ADD ADJNODE MOD ADJNODE WRFD-050301 04 WRFD-150243 WRFD-150244 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Iub IP Transmission Based on Dynamic Load Balance Iu/Iur IP Transmission Based on Dynamic Load Balance Meaning:Type of the adjacent node. GUI Value Range:IUB(Iub Interface), IUR (Iur Interface), IUCS(Iu-CS Interface), IUPS (Iu-PS Interface), UNI_AAL2SW ITCH(the adjacent node of the ATM switch on the Iub interface), NNI_AAL2SW ITCH(the adjacent node of ATM switch on Iur or Iu-CS interface) Unit:None Actual Value Range:IUB, IUR, IUCS, IUPS, UNI_AAL2SW ITCH, NNI_AAL2SW ITCH Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 23 Parameter ID NE MML Command Feature ID Feature Name Description TRANST BSC6900 ADD ADJNODE MOD ADJNODE WRFD-050301 04 WRFD-050403 WRFD-050404 WRFD-021305 01 WRFD-140207 WRFD-140208 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Dedicated Iub Transmission Control Iu/Iur Transmission Resource Pool in RNC Iub Transmission Resource Pool in RNC Meaning:Trans- port type. GUI Value Range:ATM (ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP (HYBRID IP) Unit:None Actual Value Range:ATM, IP, ATM_IP, HYBRID_IP Default Value:None TRANST BSC6910 ADD ADJNODE MOD ADJNODE WRFD-050301 04 WRFD-050404 WRFD-021305 01 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface ATM/IP Dual Stack Node B Dedicated Iub Transmission Control Meaning:Trans- port type. GUI Value Range:ATM (ATM), IP(IP), ATM_IP(ATM and IP) Unit:None Actual Value Range:ATM, IP, ATM_IP Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 24 Parameter ID NE MML Command Feature ID Feature Name Description ANI BSC6900 ADD IPPATH MOD IPPATH RMV IPPATH WRFD-050301 04 WRFD-050403 WRFD-050404 WRFD-021305 01 WRFD-140207 WRFD-140208 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Dedicated Iub Transmission Control Iu/Iur Transmission Resource Pool in RNC Iub Transmission Resource Pool in RNC Meaning:Uniqu ely identifies an adjacent node. Adjacent nodes are uniquely but not necessarily consecutively numbered within a RNC. GUI Value Range:0~65534 Unit:None Actual Value Range:0~65534 Default Value:None PATHID BSC6900 ADD IPPATH MOD IPPATH RMV IPPATH WRFD-050402 IP Transmission Introduction on Iub Interface Meaning:Uniqu ely identifies an IP path. GUI Value Range:0~65535 Unit:None Actual Value Range:0~65535 Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 25 Parameter ID NE MML Command Feature ID Feature Name Description ITFT BSC6900 ADD IPPATH MOD IPPATH WRFD-050403 WRFD-050404 WRFD-050408 WRFD-050424 WRFD-021305 01 Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Overbooking on IP Transmission Traffic Priority Mapping onto Transmission Resources Dedicated Iub Transmission Control Meaning:Type of the adjacent node. GUI Value Range:IUB(Iub Interface), IUR (Iur Interface), IUCS(Iu-CS Interface), IUPS (Iu-PS Interface) Unit:None Actual Value Range:IUB, IUR, IUCS, IUPS Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 26 Parameter ID NE MML Command Feature ID Feature Name Description PATHT BSC6900 ADD IPPATH WRFD-050402 WRFD-050403 WRFD-050404 IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Meaning:This parameter specifies the type of an IP path. It indicates the priority of the user plane data that is carried on the IP path. The mapping between the priority of the user plane data and IP path is configured through the "ADD TRMMAP" command. An IP path is of either the QoS type or the non-QoS type. For example, the IP paths used to carry BE data, AF data, and EF data are all of the non-QoS type. Different data can share the bandwidth of a QoS-type IP path. The bandwidth of a non-QoS type IP path, however, cannot be shared. IP path in hybrid IP transmission can be further categorized into high-priority IP path and low- priority IP path (identified as WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 27 Parameter ID NE MML Command Feature ID Feature Name Description LQ_xx). When the bearing type of the physical port is PPP or MP, the IP path is recommended to be configured as a high- priority path. When the physical port is an Ethernet port, the IP path is recommended to be configured as a low-priority path. For the non-QoS type IP path, the priority of EF data is higher than that of AF data, which in turn is higher than that of BE data. The actual priority of user plane data, however, is set through the "SET PHBMAP" command. GUI Value Range:QoS (QoS), BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), AF43(AF43), WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 28 Parameter ID NE MML Command Feature ID Feature Name Description EF(EF), LQ_QOS (LQ_QOS), LQ_BE (LQ_BE), LQ_AF11 (LQ_AF11), LQ_AF12 (LQ_AF12), LQ_AF13 (LQ_AF13), LQ_AF21 (LQ_AF21), LQ_AF22 (LQ_AF22), LQ_AF23 (LQ_AF23), LQ_AF31 (LQ_AF31), LQ_AF32 (LQ_AF32), LQ_AF33 (LQ_AF33), LQ_AF41 (LQ_AF41), LQ_AF42 (LQ_AF42), LQ_AF43 (LQ_AF43), LQ_EF (LQ_EF) Unit:None Actual Value Range:QoS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQ_QOS, LQ_BE, LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 29 Parameter ID NE MML Command Feature ID Feature Name Description LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF Default Value:None IPADDR BSC6900 ADD IPPATH WRFD-050402 WRFD-050403 WRFD-050404 MRFD-211501 MRFD-211502 MRFD-211504 IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B IP-Based Multi- mode Co- Transmission on BS side(GBTS) IP-Based BSC and RNC Co- Transmission on MBSC Side TDM-Based Multi-mode Co- Transmission via Backplane on BS side (GBTS) Meaning:Local IP address of an IP path. The local IP address must be the configured IP address (including the IP address and port address of the interface board). GUI Value Range:Valid IP Address Unit:None Actual Value Range:Valid IP Address Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 30 Parameter ID NE MML Command Feature ID Feature Name Description PEERIPADDR BSC6900 ADD IPPATH WRFD-050402 WRFD-050403 WRFD-050404 IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Meaning:The peer IP address should not be the same as the local address. GUI Value Range:Valid IP Address Unit:None Actual Value Range:Valid IP Address Default Value:None TXBW BSC6900 ADD IPPATH MOD IPPATH WRFD-050402 WRFD-050403 WRFD-050404 IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Meaning:Trans mit bandwidth. GUI Value Range: 1~3000000 Unit:kbit/s Actual Value Range: 1~3000000 Default Value:None RXBW BSC6900 ADD IPPATH MOD IPPATH WRFD-050402 WRFD-050403 WRFD-050404 IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Meaning:Receiv e bandwidth. GUI Value Range: 1~3000000 Unit:kbit/s Actual Value Range: 1~3000000 Default Value:None WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 31 Parameter ID NE MML Command Feature ID Feature Name Description CHECKT BSC6900 ADD IPPATH MOD IPPATH WRFD-050402 WRFD-050409 WRFD-050410 IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Meaning:This parameter is used to set IP path check type. GUI Value Range:UDP (UDP), ICMP (ICMP) Unit:None Actual Value Range:UDP, ICMP Default Value:ICMP (ICMP) WCDMA RAN One Tunnel Feature Parameter Description 7 Parameters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 32 8 Counters There are no specific counters associated with this feature. WCDMA RAN One Tunnel Feature Parameter Description 8 Counters Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 33 9 Glossary For the acronyms, abbreviations, terms, and definitions, see the Glossary. WCDMA RAN One Tunnel Feature Parameter Description 9 Glossary Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 34 10 Reference Documents 1. Transmission Resource Pool in RNC Feature Parameter Description 2. License Management Feature Parameter Description WCDMA RAN One Tunnel Feature Parameter Description 10 Reference Documents Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 35