You are on page 1of 73

A

1
How to
book
use this
Capral Aluminium Centres are a one stop
trade centre offering retail and wholesale
customers aluminium geometric extrusions,
machine rod, plate and aluminium sheet
products. The little Green Book has been
produced for the local tradesman who
can at a glace look up a particular product
within the product reference manual.
Its small enough to t in your tool box,
glove box or back pocket and handy to
have with you wherever you go. Products in
the Little Green Capral Book are either
stocked or available to order from Capral
Aluminium Centres for distribution to your
specic delivery point - delivery charges
may apply.
3
Capral at a Glance 5
Angles 10
Channels 16
Tee Sections 22
Flat Bars 24
Rectangular Hollows 30
Square Solid 36
Square Hollows 38
Tubes 44
Drawn Tube 50
Round Bar 52
Machine Rod 58
Miscellaneous Extrusion 60
Other Geometric Shapes 64
Moulds and Trims 66
Qubelok Extrusion 70
Qubelok Accessories 74
Seating Accessories 78
Scaffold Plank 84
Transport Sections 86
Marine Sections 94
Yacht Masts 97
Coolroom & Portable Buildings 98
Signs 104
Sheets Plates and Panels 110
Alupanel 113
I Beams - Geometric 113
Industrial Sys-Small 113
Sheet/Plate (except Gr. 5083) 114
Sheet/Plate Grade 5083/5383 (3-8mm) 115
Plate Grade 5083/5383 (>=10mm) 115
Treadplate (All) 115
Advantages of Aluminium 116
Conditions of Sale 126
Notes 134
Table of
contents
5
Capral
glance
at a
With a history spanning over 75 years, Capral is the
largest manufacturer and distributor of aluminium
products located in Australia. Caprals manufacturing
footprint includes the largest extrusion facility in the
Southern Hemisphere at its Bundamba operation in
Queensland. In addition, extrusion manufacturing
facilities are also located in Victoria, New South Wales,
South Australia and Western Australia, all supplying
world class products at short lead times.
Caprals extensive metropolitan and regional distribution
network services a wide range of industries including
residential and commercial construction, transport,
marine and general engineering. Regional distribution
centres support a network of conveniently located trade
centres called Capral Aluminium Centres operating
throughout metropolitan and regional Australia
supplying a wide range of geometric extrusions,
machine rod, plate and aluminium sheet products.
7
Capral Heritage
Capral is Australias largest manufacturer of aluminium products with
a history of investing in Australian industry for over 75 years. Capral
understands the Australian market and its environmental conditions and
this has made it Australias leading designer, manufacturer and distributor
of aluminium extrusions.
Special Extruded Products
Capral has the capability to design, produce and stock our customers own
sections. Our extrusion manufacturing facilities can provide technical
information along with in-house facilities to help design and produce extruded
proles specic to our customers needs.
Our extrusion manufacturing facilities produce proles to the highest quality
for use in numerous applications, such as architectural, automotive, marine,
electrical, general engineering, road and transport.
A typical route from conception to section:
Customer product requirement in the form of a rough drawing.
Design development utilising CAD/CAM technology.
Die print/drawing produced and then approved by customer.
Die produced and sample section extruded.
Bulk material is extruded once off-tool sample approved.
Accreditation and Certication
All extrusions manufactured by Capral are produced to the chemical
composition, mechanical property and dimensional tolerances in AS/NZS
1866:1997. Capral is also accredited to:
AS/NZS ISO 9001:2008 - Quality Management Systems.
AS/NZS ISO 14001:2004 - Environmental Management Systems.
ISO/IEC 17025 - NATA Accredited Mechanical Testing Laboratory.
All major international marine classifcation societies including DNV
(Det Norske Veritas) and Lloyds Register.
Aluminium The Super Metal
Innovation drives our world. New developments and technologies spur a
constant search for new and improved materials to satisfy the limits of our
imagination, yet few to date have surpassed the sheer versatility of aluminium.
Aluminium is corrosion resistant, strong, lightweight and long lasting.
It is a metal which may be cast, rolled, drawn or extruded and may be
nished by polishing, anodising or coating to achieve a myriad of visual
and functional effects.
9
Consider its abundance, affordability, corrosion resistance and adaptability
and you begin to appreciate how truly remarkable aluminium is compared
to other metals.
Most importantly, being readily recyclable and with one of the highest
recycling rates of any metal, aluminium is an environmentally sustainable
material.
Aluminium Uses
Aluminium is the material of choice for an array of applications from building
and construction materials, consumer products, electronics and aeronautics
just to name a few.
You will nd aluminium in safety components of your car, from the seat belt
assembly to the anti-lock braking system. You will nd it in other places too,
your kitchen appliances, your pots and pans, your mobile phone or even in
the next aeroplane you y in. The applications for aluminium span almost
every major industry.
Its strength to weight ratio allows products to be lighter, stronger and
more efcient.
Its corrosion resistant properties lend itself to harsh environments, providing
low maintenance solutions and ensuring extended product lifecycles.
The many forms aluminium alloys can take, allow it equally to being cast
into forms, drawn into tube or strand applications, extruded into intricate
proles or rolled into heavy plate or ultra-thin foils. In fact its hard to
imagine how different our lives would be without aluminium.
Drawings
Drawings shown in this product reference manual are generally not to scale
and are an indication of the general shape and/or major dimensions. If you
require full scale, full dimensioned drawings with tolerance details, please
contact your nearest Capral Aluminium Centre for assistance.
Abbreviations
T = Thickness/gauge
W = Width
L = Length
Kg = Kilogram
M = Metres
mm = Millimetres
Additional Information
Pickup: Free pick up during business hours only at Capral Aluminium Centres.
Packaging: Capral Aluminium Centres provide top quality cardboard
packing which is adequate for normal transport methods. If a particular
transport method is nominated by the Purchaser, this packaging must be
nominated on the purchasers order and will be charged to the purchaser.
Delivery: The method of packaging and shipment of the goods will be
designated by Capral. Charges to the purchasers account may be made
where other methods are requested by the purchaser. Unless stated
otherwise on specic product data, the following delivery terms will apply:
1. All orders from Capral Aluminium Centres will be at the purchasers option:
(a) Delivered to the purchasers address if within Caprals Aluminium Centres
normal metropolitan delivery area for the nominated delivery charge
per order
(b) Collected by the Customer or his authorised representative from the
Capral Aluminium Centre. Twenty four hour notice of intention to collect
may be required.
2. If it is necessary for Capral Aluminium Centre to split an order into more than
one delivery, only the nominated delivery charge will apply.
3. Request for delivery by a mode of transport, or to a destination, not covered
in 1. above, will be subject to special enquiry.
Prices subject to quotation: Written quotations for specic projects or
products not covered by the Capral standard price list will be held rm for
thirty (30) days from the quotation date.
Capral reserves the right to revise any quotation not accepted within the
(30) day period.
Orders from products subject to quotation will be delivered in accordance
with the Capral delivery schedule operating at the time the order is placed.
If the purchaser requests a deferment of delivery, then Capral will invoice
the purchaser for the goods at the time they are ready for delivery.
11
Angles
13
R1
A
B
T
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
913354 EK9102 12 12 1.6 3.7 100 100 Mill Finish 6060 T5 0.355
970249 EK9102 12 12 1.6 4.23 100 100 Mill Finish 6060 T5 0.406
813623 EK9102 12 12 1.6 6.5 100 100 Mill Finish 6060 T5 0.624
813626 EK9103 12 12 3 6.5 100 100 Mill Finish 6060 T5 1.111
813586 EB1118 16 16 1.6 6.5 100 100 Mill Finish 6060 T5 0.858
813627 EK9104 16 16 3 6.5 100 100 Mill Finish 6060 T5 1.527
813631 EK9105 20 12 1.6 6.5 100 100 Mill Finish 6060 T5 0.845
841398 EK9106 20 12 3 6.5 100 100 Mill Finish 6060 T5 1.527
813637 EK9107 20 20 1.6 6.5 100 100 Mill Finish 6060 T5 1.073
813640 EK9108 20 20 3 6.5 100 100 Mill Finish 6060 T5 1.95
913355 EK9109 25 12 1.6 3.7 100 100 Mill Finish 6060 T5 0.566
970281 EK9109 25 12 1.6 4.23 100 100 Mill Finish 6060 T5 0.647
813645 EK9109 25 12 1.6 6.5 100 100 Mill Finish 6060 T5 0.995
815393 EK9110 25 12 3 6.5 100 100 Mill Finish 6060 T5 1.788
813650 EK9111 25 20 1.6 6.5 100 100 Mill Finish 6060 T5 1.216
813653 EK9112 25 20 3 6.5 100 100 Mill Finish 6060 T5 2.21
913358 EK9216 25 25 1.6 3.7 100 100 Mill Finish 6060 T5 0.77
970283 EK9216 25 25 1.6 4.23 100 100 Mill Finish 6060 T5 0.88
813740 EK9216 25 25 1.6 6.5 100 100 Mill Finish 6060 T5 1.352
813745 EK9217 25 25 3 6 100 100 Mill Finish 6060 T5 2.286
813746 EK9217 25 25 3 6.5 100 100 Mill Finish 6060 T5 2.476
850349 EU2611 25 25 6 6.5 100 100 Mill Finish 6060 T5 4.628
810985 EG6459 25.4 25.4 1.57 4 106 106 Mill Finish 6060 T1 0.928
813657 EK9114 32 20 1.6 6.5 104 100 Mill Finish 6060 T5 1.417
813658 EK9116 32 20 3 6.5 103 103 Mill Finish 6060 T5 2.581
841418 EK9117 32 25 3 6.5 114 114 Mill Finish 6060 T5 2.841
810936 EB1126 32 32 1.6 6.5 128 128 Mill Finish 6060 T5 1.755
813662 EK9118 32 32 3 6.5 128 128 Mill Finish 6060 T5 3.211
841422 EK9119 32 32 4 6 128 128 Mill Finish 6060 T5 3.888
807782 E20434 40 12 1.6 6.5 104 104 Mill Finish 6060 T5 1.417
841428 EK9120 40 12 3 6.5 103 103 Mill Finish 6060 T5 2.581
813752 EL3257 40 20 1.6 6.5 119 119 Mill Finish 6060 T5 1.638
Angles
Capral Limited March 2011
15
Material
No.
Die No A
mm
B
mm
T mm R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
813663 EK9121 40 20 3 RAD 6.5 119 119 Mill Finish 6060 T5 3.003
813792 EL8124 40 25 1.6 6.5 129 129 Mill Finish 6060 T5 1.774
813665 EK9122 40 25 3 6.5 130 130 Mill Finish 6060 T5 3.263
813672 EK9123 40 40 1.6 6.5 160 160 Mill Finish 6060 T5 2.197
813676 EK9124 40 40 3 6.5 160 160 Mill Finish 6060 T5 4.056
813678 EK9125 40 40 4 6 160 160 Mill Finish 6060 T5 4.926
813679 EK9125 40 40 4 6.5 160 160 Mill Finish 6060 T5 5.336
813682 EK9126 40 40 6 6.5 160 160 Mill Finish 6060 T5 7.793
811106 EK9127 50 12 3 6.5 124 124 Mill Finish 6060 T5 3.107
810102 E34020 50 20 1.6 6.5 140 137 Mill Finish 6060 T5 1.911
841457 EK9128 50 20 3 6.5 140 140 Mill Finish 6060 T5 3.53
813684 EK9129 50 25 1.6 6.5 149 149 Mill Finish 6060 T5 2.06
813687 EK9130 50 25 3 6.5 150 150 Mill Finish 6060 T5 3.789
841461 EK9131 50 40 3 6.5 180 180 Mill Finish 6060 T5 4.582
807916 EL9417 50 50 1.6 6.5 199 199 Mill Finish 6060 T5 2.763
813690 EK9132 50 50 3 6.5 200 200 Mill Finish 6060 T5 5.109
813691 EK9133 50 50 4 6 200 200 Mill Finish 6060 T5 6.221
813692 EK9133 50 50 4 6.5 200 200 Mill Finish 6060 T5 6.74
813696 EK9134 50 50 6 6.5 200 200 Mill Finish 6060 T5 9.899
810977 EG6419 50.8 50.8 6.4 RAD 5.5 201 201 Mill Finish 6061 T6 9.102
840368 EB1155 60 25 3 6.5 169 169 Mill Finish 6060 T5 4.316
809503 E20560 60 40 4 6.5 198 198 Mill Finish 6060 T5 6.714
813699 EK9135 60 60 3 6.5 240 240 Mill Finish 6060 T5 6.162
841483 EK9136 60 60 6 6.5 240 240 Mill Finish 6060 T5 12.006
810100 E34019 70 20 1.6 6.5 180 177 Mill Finish 6060 T5 2.476
843047 EN5714 70 25 1.6 6.5 190 190 Mill Finish 6060 T5 2.613
815581 EN7492 70 40 1.6 6.5 220 220 Mill Finish 6060 T5 3.036
809505 E20561 76 25 1.6 6.5 200 200 Mill Finish 6060 T5 2.762
847757 EQ2029 76 55 5 RAD 6.5 260 260 Mill Finish 6060 T5 10.965
847761 EQ2029 76 55 5 RAD 6.5 260 260 Mill Finish 6106 T6 10.965
808398 E03237 76.2 25.4 3.2 6.5 203 203 Mill Finish 6060 T5 5.479
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
841100 EG6410 76.2 50.8 6.35 RAD 5.5 251 251 Mill Finish 6061 T6 11.523
808143 E06168 76.2 76.2 3.2 6.5 305 305 Mill Finish 6060 T5 8.313
841094 EG6408 76.2 76.2 6.35 RAD 5.5 301 301 Mill Finish 6061 T6 13.959
810975 EG6408 76.2 76.2 6.35 RAD 6 301 301 Mill Finish 6082 T6 15.228
841093 EG6407 76.2 76.2 9.52 RAD 5.5 302 302 Mill Finish 6061 T6 20.389
813700 EK9137 80 20 3 6.5 199 199 Mill Finish 6060 T5 5.109
840370 EB1160 80 40 6 6 240 240 Mill Finish 6106 T4 11.082
808489 E20559 80 50 2.5 6.5 260 260 Mill Finish 6060 T5 5.596
817737 EN5324 80 50 6 RAD 6 258 258 Mill Finish 6061 T6 12.108
809497 E20536 80 80 4 6.5 320 320 Mill Finish 6060 T5 10.952
841492 EK9138 80 80 6 6.5 320 320 Mill Finish 6060 T5 16.218
836350 E20707 80 80 6 RAD 6 318 318 Mill Finish 6060 T5 15.024
809521 E20709 80 80 10 RAD 6 317 317 Mill Finish 6061 T6 24.426
908410 EME30823 90 40 1.6 RAD 6.5 259 259 Mill Finish 6060 T5 3.601
808487 E20525 100 50 4 6.5 300 300 Mill Finish 6060 T5 10.25
847658 EQ1558 100 50 6 RAD 6 298 298 Mill Finish 6061 T6 14.052
809523 E20714 100 100 8 RAD 6 397 397 Mill Finish 6061 T6 25.008
810938 EB1153 101.6 50.8 3.2 6 305 305 Mill Finish 6060 T5 7.692
808344 EL4195 101.6 50.8 6.4 RAD 5.5 302 302 Mill Finish 6061 T6 13.954
910166 EXP0062 101.6 101.6 5.5 402 402 Mill Finish 6351 T6 18.827
808206 EK9139 125 50 3 6.5 350 350 Mill Finish 6060 T5 9.054
809517 E20700 125 50 6 RAD 6 348 348 Mill Finish 6061 T6 16.482
Capral Limited March 2011
Angles continued
17
Lores IMage
Channels
19
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
813710 EK9146 10 10 1.6 6.5 100 100 Mill Finish 6060 T5 0.754
813711 EK9147 12 10 1.6 RAD 6.5 100 100 Mill Finish 6060 T5 0.864
813716 EK9149 12 12 1.6 6.5 100 100 Mill Finish 6060 T5 0.917
815401 EK9151 12 20 2.5 6.5 100 100 Mill Finish 6060 T5 2.061
808161 E20770 16 12 1.6 6.5 100 100 Mill Finish 6060 T5 1.033
815408 EK9152 16 16 1.6 6.5 100 100 Mill Finish 6060 T5 1.261
809530 E20772 16 16 3 6.5 100 100 Mill Finish 6060 T5 2.21
807920 EN4620 19.16 20 1.2 RAD 6 114 114 Mill Finish 6060 T5 1.092
813719 EK9153 20 16 1.6 6.5 101 101 Mill Finish 6060 T5 1.372
811130 EL1812 20 20 1.6 6.5 116 116 Mill Finish 6060 T5 1.592
841525 EK9155 20 20 3 6.5 114 114 Mill Finish 6060 T5 2.841
807919 EN4619 22.32 20 1.2 RAD 6.7 120 120 Mill Finish 6060 T5 1.286
815410 EK9156 25 12 3 6.5 100 100 Mill Finish 6060 T5 2.262
813748 EL1813 25 20 1.6 6.5 127 127 Mill Finish 6060 T5 1.735
813721 EK9157 25 20 2.5 6.5 124 124 Mill Finish 6060 T5 2.632
813756 EL5249 25 25 1.6 6.5 147 100 Mill Finish 6060 T5 2.015
813724 EK9158 25 25 3 6.5 143 143 Mill Finish 6060 T5 3.627
815412 EK9159 25 40 3 6.5 203 105 Mill Finish 6060 T5 5.213
909512 EXP0051 28 25 1.6 4.3 150 150 Mill Finish 6060 T5 1.355
809544 E20784 32 16 1.6 6.5 125 125 Mill Finish 6060 T5 1.703
815413 EK9160 32 25 3 6.5 158 158 Mill Finish 6060 T5 4.004
809107 EH5368 38.1 25.4 1.3/1.5 5.5 174 174 Mill Finish 6060 T5 1.749
847649 EQ1556 40 20 2 6.5 156 156 Mill Finish 6060 T5 2.665
813727 EK9161 40 20 3 6.5 153 153 Mill Finish 6060 T5 3.893
813730 EK9162 40 25 3 6.5 174 174 Mill Finish 6060 T5 4.42
809552 E20790 40 40 3 6.5 232 232 Mill Finish 6060 T5 6
811004 EH5367 41.9 25.4 1.6 6.5 181 181 Mill Finish 6060 T5 2.502
881369 EP7234 44.3 41.5 6 4 241 241 Mill Finish 6106 T6 7.364
808197 EG1021 44.45 25.4 3.18 6.5 184 184 Mill Finish 6060 T5 4.959
841317 EK5215 44.45 44.45 6.35 RAD 4 252 252 Mill Finish 6060 T5 8.228
809134 EK9215 50 25 3 6.5 194 194 Mill Finish 6060 T5 4.947
813731 EK9163 50 50 3 6.5 294 294 Mill Finish 6060 T5 7.578
807835 E20830 53 25 1.5 6.5 203 103 Mill Finish 6060 T5 2.633
Channels
Capral Limited March 2011
R1
A
B
T
21
Channels continued
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
815484 EN3529 200 90 RAD 7 730 730 Mill Finish 6060 T5 60.536
889034 E25446 250 110 12 2.5 891 891 Mill Finish 6060 T5 35.208
874198 EU1691 254 115 12.5 RAD 2.71 919 919 Mill Finish 6082 T5 40.994
947141 EU1691 254 115 12.5 RAD 3.25 919 919 Mill Finish 6060 T4 49.163
850292 EU1691 254 115 12.5 RAD 6 919 919 Mill Finish 6061 T6 90.762
816838 E05721 381 152.4 12.7 RAD 2.7 1324 1324 Mill Finish 6106 T6 52.844
946461 E05721 381 152.4 12.7 RAD 3 1324 1324 Mill Finish 6060 T4 58.716
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
809560 E20825 53.4 25 1.2 6.5 203 203 Mill Finish 6060 T5 2.112
911946 E20821 54.2 20 1.6 4.8 185 185 Mill Finish 6060 T5 1.891
815071 E20821 54.2 20 1.6 6 185 185 Mill Finish 6060 T5 2.364
809558 E20821 54.2 20 1.6 6.5 185 185 Mill Finish 6060 T5 2.561
912295 EAL22945 57.15 31.75 3.96 RAD 5.8 228 228 Mill Finish 6005A T5 7.175
841550 EK9164 60 32 3 6.5 242 242 Mill Finish 6060 T5 6.214
808199 EG6435 76 38 6-Aug RAD 5.5 286 286 Mill Finish 6061 T6 15.032
968485 EG6435 76.2 38.1 RAD 6.2 286 286 Mill Finish 6061 T6 16.945
808571 E51877 78.2 38 1.6 6.5 304 155 Mill Finish 6060 T5 4.212
813733 EK9165 80 25 3 6.5 253 253 Mill Finish 6060 T5 6.526
813735 EK9166 80 40 4 6.5 312 312 Mill Finish 6060 T5 10.673
908447 EAL12324 92.3 25 1.8 6.5 276 145 Mill Finish 6060 T5 6.279
813736 EK9168 100 25 3 6.5 294 294 Mill Finish 6060 T5 7.578
912921 EAL22966 100 45 4.8 RAD 6.5 366 366 Mill Finish 6005A T5 15.249
815321 EB1208 100 50 3 6.5 394 394 Mill Finish 6060 T5 10.212
842521 EN3527 100 50 5 RAD 6 386 386 Mill Finish 6005A T5 15.558
841141 EG6434 101.6 50.8 RAD 5.5 385 385 Mill Finish 6082 T6 20.581
810376 E51852 103.2 38 1.6 RAD 6.5 354 181 Mill Finish 6060 T5 4.914
808577 E60158 117.5 25.4 3.2/1.5 6.5 328 171 Mill Finish 6060 T5 7.768
908449 EAL12335 118 25 1.8 6.5 328 168 Mill Finish 6060 T5 7.592
841125 EG6433 127 63.5 RAD 5.5 486 486 Mill Finish 6061 T6 28.875
862760 EG6433 127 63.5 RAD 6 486 486 Mill Finish 6061 T6 31.5
808174 E25804 145 80 6 RAD 5.5 585 585 Mill Finish 6060 T5 24.799
810981 EG6432 152 64 6-Aug RAD 5.5 536 536 Mill Finish 6061 T6 28.556
890157 EP0372 175 7 RAD 6 664 664 Mill Finish 6060 T5 36.972
893112 EP0372 175 7 RAD 6 664 664 Mill Finish 6060 T591 36.972
810979 EG6430 177.8 76.2 6.35 5.5 637 637 Mill Finish 6061 T6 40.738
952249 EG6430 177.8 76.2 6.35 6.5 637 637 Mill Finish 6061 T6 48.146
809563 E20935 180 80 6-Nov 6 662 662 Mill Finish 6061 T6 44.118
941609 EU6362 180 80 6 RAD 6 651 651 Mill Finish 6106 T4 31.116
891748 EN3529 200 90 RAD 6 730 730 Mill Finish 6060 T591 51.888
Capral Limited March 2011
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
811108 EK9140 20 20 1.6 4 100 100 Mill Finish 6060 T5 0.664
841498 EK9141 20 20 3 4 100 100 Mill Finish 6060 T5 1.2
813705 EK9142 25 25 1.6 6.5 100 100 Mill Finish 6060 T5 1.359
841506 EK9143 25 25 3 6.5 100 100 Mill Finish 6060 T5 2.477
807735 E05080 36 36 1.2 5.49 145 100 Mill Finish 6060 T5 1.35
807880 E71996 38 63 RAD 6 198 198 Mill Finish 6060 T5 9.978
810132 EL5287 40 40 1.6 6.5 160 100 Mill Finish 6060 T5 2.204
813708 EK9144 40 40 3 6.5 160 160 Mill Finish 6060 T5 4.056
808462 E20212 50 25 1.6 6.5 150 100 Mill Finish 6060 T5 2.054
814852 E20219 50 50 4 RAD 6 195 195 Mill Finish 6082 T6 6.318
815047 E20219 50 50 4 RAD 6 195 195 Mill Finish 6082 T6 6.318
815046 E20205 50 50 6 RAD 6 195 195 Mill Finish 6082 T6 9.312
Tee
Sections
B
T
A
23
25
Flat Bars
27
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
816250 EX4001 10 3 4 100 100 Mill Finish 6060 T5 0.32
852141 EX4095 12 1.6 4 100 100 Mill Finish 6060 T5 0.208
863700 EX4002 12 3 4 100 100 10UM Clear 6060 T5 0.388
813931 EX4002 12 3 4 100 100 Mill Finish 6060 T5 0.388
851813 EX4019 12 6 4 100 100 Mill Finish 6060 T5 0.776
852035 EX4028 12 10 4 100 100 Mill Finish 6060 T5 1.296
908070 EX4003 16 3 4 100 100 10UM Clear 6060 T5 0.52
851988 EX4003 16 3 4 100 100 Mill Finish 6060 T5 0.52
863698 EX4000 20 1.6 4 100 100 10UM Clear 6060 T5 0.344
816249 EX4000 20 1.6 4 100 100 Mill Finish 6060 T5 0.344
862397 EX4004 20 3 4 100 100 15UM Clear 6060 T5 0.648
813934 EX4004 20 3 4 100 100 Mill Finish 6060 T5 0.648
816259 EX4020 20 6 4 100 100 Mill Finish 6060 T5 1.3
808087 E20016 20 10 4 100 100 Mill Finish 6060 T5 2.16
852060 EX4036 20 12 4 100 100 Mill Finish 6060 T5 2.592
863165 EX4005 25 3 4 100 100 10UM Clear 6060 T5 0.812
862398 EX4005 25 3 4 100 100 15UM Clear 6060 T5 0.812
813938 EX4005 25 3 4 100 100 Mill Finish 6060 T5 0.812
813960 EX4021 25 6 4 100 100 Mill Finish 6060 T5 1.62
851817 EX4021 25 6 4 100 100 Mill Finish 6060 T1 1.62
813973 EX4029 25 10 4 100 100 Mill Finish 6060 T5 2.7
852061 EX4037 25 12 4 100 100 Mill Finish 6060 T5 3.24
852083 EX4045 25 20 4 100 100 Mill Finish 6060 T5 5.4
875893 EX1468 25.4 1.57 4 100 100 Mill Finish 6060 T5 0.432
863703 EX4006 32 3 4 100 100 10UM Clear 6060 T5 1.036
813943 EX4006 32 3 4 100 100 Mill Finish 6060 T5 1.036
816261 EX4022 32 6 4 100 100 Mill Finish 6060 T5 2.072
852036 EX4030 32 10 4 100 100 Mill Finish 6060 T5 3.456
852038 EX4030 32 10 6.5 100 100 Mill Finish 6061 T6 5.616
862400 EX4007 40 3 4 100 100 15UM Clear 6060 T5 1.292
813947 EX4007 40 3 4 100 100 Mill Finish 6060 T5 1.292
905855 EX4015 40 4 4 100 100 Mill Finish 6106 T6 1.728
B
A
Flat Bars
Capral Limited March 2011
29
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
807849 E22071 40 4 RAD 6 100 100 Mill Finish 6060 T5 2.532
813962 EX4023 40 6 4 100 100 Mill Finish 6060 T5 2.592
813974 EX4031 40 10 4 100 100 Mill Finish 6060 T5 4.316
876206 EX4031 40 10 6 100 100 Mill Finish 6060 T5 6.474
852062 EX4038 40 12 4 104 104 Mill Finish 6060 T5 5.184
907742 E20038 40 16 4 112 112 Mill Finish 6060 T5 6.912
812605 EX4047 40 25 4 130 130 Mill Finish 6060 T5 10.8
862401 EX4008 50 3 4 106 106 15UM Clear 6060 T5 1.62
813950 EX4008 50 3 4 106 106 Mill Finish 6060 T5 1.62
851805 EX4016 50 4 4 108 108 Mill Finish 6060 T5 2.16
807882 E73211 50 5 RAD 6 107 100 Mill Finish 6060 T5 3.419
813965 EX4024 50 6 RAD 4 110 110 Mill Finish 6060 T5 3.232
812590 EX4024 50 6 RAD 6 110 110 Mill Finish 6082 T6 4.848
813975 EX4032 50 10 4 120 120 Mill Finish 6060 T5 5.4
816287 EX4039 50 12 4 124 124 Mill Finish 6060 T5 6.48
812603 EX4046 50 20 4 140 140 Mill Finish 6060 T5 10.8
808800 EX4048 50 25 4 150 150 Mill Finish 6060 T5 13.5
852092 EX4048 50 25 4.3 150 150 Mill Finish 6060 T591 14.513
841275 EK1150 50.8 3.96 RAD 6 106 106 Mill Finish 6060 T591 3.21
841266 EH9873 50.8 6.35 RAD 4 109 109 Mill Finish 6106 T4 3.392
816253 EX4009 60 3 4 126 126 Mill Finish 6060 T5 1.944
940221 EP9811 60 5 RAD 6 126 126 Mill Finish 6060 T4 4.776
816300 EX4069 60 6 4 132 132 Mill Finish 6060 T5 3.888
852128 EX4070 60 10 4 140 140 Mill Finish 6060 T5 6.48
852069 EX4040 60 12 4 144 144 Mill Finish 6060 T5 7.776
904735 EX4059 65 5 4 139 139 Mill Finish 6060 T5 3.508
964943 EAL12291 80 1.6 3.6 163 163 15UM Clear 6060 T5 1.242
906845 EAL12291 80 1.6 3.6 163 163 Mill Finish 6060 T5 1.242
813952 EX4010 80 3 4 166 166 Mill Finish 6060 T5 2.592
851787 EX4010 80 3 4 166 166 Mill Finish 6106 T6 2.592
813969 EX4025 80 6 4 172 172 Mill Finish 6060 T5 5.184
852020 EX4025 80 6 4 172 172 Mill Finish 6063 T5 5.184
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
812592 EX4025 80 6 6 172 172 Mill Finish 6082 T6 7.776
807881 E73113 80 6 RAD 6 171 171 Mill Finish 6060 T5 8.328
840358 EB1092 80 6.3 RAD 4 167 167 Mill Finish 6060 T5 5.344
939408 EB1092 80 6.3 RAD 6 167 167 Mill Finish 6060 T4 8.016
813980 EX4033 80 10 4 180 180 Mill Finish 6060 T5 8.64
813981 EX4033 80 10 4 180 180 Mill Finish 6060 T595 8.64
809391 E20061 80 12 4 184 184 Mill Finish 6060 T5 10.368
852081 EX4044 80 16 4 192 192 Mill Finish 6060 T5 13.824
808089 EX4049 80 25 4 210 210 Mill Finish 6060 T5 21.6
852095 EX4049 80 25 4 210 210 Mill Finish 6061 T6 21.6
862655 E34113 100 1.5 3.75 202 202 15UM Clear 6060 T5 1.515
837582 E34113 100 1.5 3.75 202 202 Mill Finish 6060 T5 1.515
964942 EAL8994 100 1.6 3.6 203 203 15UM Clear 6060 T5 1.552
907328 EAL8994 100 1.6 3.6 203 203 Mill Finish 6060 T5 1.552
863706 EX4011 100 3 4 206 206 10UM Clear 6060 T5 3.24
813957 EX4011 100 3 4 206 206 Mill Finish 6060 T5 3.24
813971 EX4026 100 6 4 212 212 Mill Finish 6060 T5 6.48
816275 EX4026 100 6 6 212 212 Mill Finish 6082 T6 9.72
813982 EX4034 100 10 4 220 220 Mill Finish 6060 T5 10.8
813983 EX4034 100 10 4 220 220 Mill Finish 6060 T595 10.8
928153 EX4034 100 10 4 220 220 Mill Finish 6106 T6 10.8
812599 EX4034 100 10 6 220 220 Mill Finish 6082 T6 16.2
813984 EX4042 100 12 4 224 224 Mill Finish 6106 T6 12.96
813986 EX4042 100 12 4 224 224 Mill Finish 6060 T5 12.96
809401 E20071 100 20 4 239 239 Mill Finish 6060 T5 21.6
852097 EX4050 100 25 4 250 250 Mill Finish 6060 T5 27
910983 EXP0101 150 1.8 3.6 304 304 10UM Clear 6060 T5 2.635
969939 EP11453 150 8 4 314 314 Mill Finish 6060 T5 12.952
816276 EX4027 160 6 4 330 330 Mill Finish 6060 T5 10.36
816284 EX4035 160 10 4 340 340 Mill Finish 6060 T5 17.28
812601 EX4043 160 12 4 344 344 Mill Finish 6060 T5 20.736
852102 EX4051 160 25 4 370 370 Mill Finish 6060 T5 43.2
Capral Limited March 2011
Flat bars continued
31
Regular
Hollows
33
Material
No.
Die No A
mm
B
mm
T
mm
R1
m
L m AP PP Finish Alloy/
Temp
Nom
Mass
888882 EP7822 38 16 1.6 RAD 6.5 106 106 Mill Finish 6060 T5 2.841
868705 E22174 38 25 1.5 RAD 2.475 120 120 Mill Finish 6063 T6 1.163
868712 E22174 38 25 1.5 RAD 2.475 120 120 Mill Finish 6063 T6 1.163
869347 E22174 38 25 1.5 RAD 2.475 120 120 Mill Finish 6063 T6 1.163
869348 E22174 38 25 1.5 RAD 2.475 120 120 Mill Finish 6063 T6 1.163
887449 E22174 38 25 1.5 RAD 2.475 120 120 Mill Finish 6063 T6 1.163
887450 E22174 38 25 1.5 RAD 2.475 120 120 Mill Finish 6063 T6 1.163
809600 E22174 38 25 1.5 RAD 6 120 120 Mill Finish 6106 T6 2.82
817509 E22174 38 25 1.5 RAD 6 120 120 Mill Finish 6060 T5 2.82
836484 E22174 38 25 1.5 RAD 6.5 120 120 Mill Finish 6106 T6 3.055
890868 E22174 38 25 1.5 RAD 7.3 120 120 Mill Finish 6060 T5 3.431
906033 EN9524 38 25 2 RAD 6.5 121 121 Mill Finish 6106 T6 4.037
808742 EH2938 38.1 17.45 3.18 6.5 111 111 Mill Finish 6060 T5 5.492
848193 EQ4084 38.1 25.4 1.6 RAD 6 121 121 Mill Finish 6106 T6 3.03
809093 EG2205 38.1 25.4 2.54 6.5 127 127 Mill Finish 6060 T5 5.206
814552 EN6565 38.3 25.3 1.95 RAD 6 126 126 Mill Finish 6106 T6 3.756
815318 EB1014 40 25 2.5 6.5 130 130 Mill Finish 6060 T5 5.265
809585 E22122 40 25 3 RAD 6.5 125 125 Mill Finish 6060 T5 6.09
836450 E22167 50 25 1.5 RAD 6 148 148 Mill Finish 6060 T5 3.486
809596 E22167 50 25 1.5 RAD 6.5 148 148 Mill Finish 6060 T5 3.776
850730 EU7751 50 25 2.5 6.5 150 150 Mill Finish 6060 T5 6.143
813770 EL8012 50 25 3 6.5 150 150 Mill Finish 6060 T5 7.267
815444 EL8013 50 40 3 6.5 180 180 Mill Finish 6060 T5 8.846
847616 EQ1148 50.8 25.4 2.5 RAD 6 150 150 Mill Finish 6060 T5 5.742
809089 EE3956 50.8 38.1 3.18 RAD 6.5 178 178 Mill Finish 6060 T5 9.366
813772 EL8015 60 40 3 6.5 200 200 Mill Finish 6060 T5 9.899
841963 EL8016 60 50 3 6.5 220 220 Mill Finish 6060 T5 10.985
816414 EE3867 63.5 50.8 3.18 RAD 6.5 229 229 Mill Finish 6060 T5 12.376
850051 EQ6823 65 16 1.2 RAD 6.5 156 156 Mill Finish 6060 T5 3.224
855605 EQ6948 65 16 1.4 RAD 6.5 156 156 Mill Finish 6060 T5 3.744
807731 E03493 76.2 25.4 2.35 RAD 6.5 203 203 Mill Finish 6060 T5 8.001
B
A
T
Regular Hollows
Capral Limited March 2011
35
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
809142 EL4238 76.2 25.4 2.4 6.5 203 203 Mill Finish 6060 T5 8.157
841068 EG4433 76.2 38.1 3.18 RAD 6.5 229 229 Mill Finish 6060 T5 12.675
808139 E01864 76.2 50.5 3.2 6.5 253 253 Mill Finish 6060 T5 13.546
815907 EQ1915 76.2 50.8 1.6 6 254 254 Mill Finish 6060 T5 6.42
813774 EL8018 80 25 3 6.5 210 210 Mill Finish 6060 T5 10.426
813775 EL8019 80 40 3 6.5 240 240 Mill Finish 6060 T5 12.005
849873 EQ6383 80 40 3 RAD 6.5 229 229 Mill Finish 6061 T6 11.798
813778 EL8020 80 50 3 6.5 260 260 Mill Finish 6060 T5 13.058
841973 EL8020 80 50 3 6.5 260 260 Mill Finish 6005A T5 13.058
943022 EP9944 80 50 3 RAD 6.5 250 250 Mill Finish 6060 T5 12.851
854520 EH5716 82.55 28.58 2.29 6.5 222 222 Mill Finish 6060 T5 8.567
813781 EL8021 100 25 2.5 6.5 250 250 Mill Finish 6060 T5 10.53
841984 EL8023 100 40 3 6.5 280 280 Mill Finish 6060 T5 14.112
895481 EP8087 100 50 1.6 6.5 299 299 Mill Finish 6106 T6 8.249
815450 EL8024 100 50 1.6 RAD 6.5 299 299 Mill Finish 6060 T5 8.242
813788 EL8025 100 50 3 6.5 300 300 Mill Finish 6060 T5 15.164
969142 EP11377 100 50 3.2 RAD 6.5 294 294 Mill Finish 6060 T5 16.01
954507 EB1592 100 50 6 RAD 6.5 286 286 Mill Finish 6005A T5 28.158
841072 EG5074 101.6 76.2 2.29 RAD 6.1 346 346 Mill Finish 6060 T5 12.822
841075 EG5074 101.6 76.2 2.29 RAD 8 346 346 Mill Finish 6060 T5 16.816
842005 EL8028 125 40 3 6.5 330 330 Mill Finish 6060 T5 16.744
842006 EL8030 125 50 3 6.5 349 349 Mill Finish 6060 T5 17.791
815453 EL8033 150 50 3 6.5 400 400 Mill Finish 6060 T5 20.43
814487 E01795 152.4 38.1 3.2 6.5 381 381 Mill Finish 6060 T5 20.676
808140 E03267 152.4 76.2 6.35 RAD 6 454 454 Mill Finish 6060 T5 44.382
970382 EP11556 160 106 6 RAD 5.5 521 521 Mill Finish 6005A T5 44.743
815456 EL8035 200 50 3 6.5 500 500 Mill Finish 6060 T5 25.694
814521 EH3532 203.2 50.8 5-Aug 6.5 507 507 Mill Finish 6060 T5 45.35
836457 E22173 250 50 3 6.5 600 600 Mill Finish 6106 T6 30.953
B
R2
A
T
R1
Regular Hollows continued
Capral Limited March 2011
A
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
814123 EX6500 6 4 100 100 Mill Finish 6060 T5 0.388
856311 EX6501 10 4 100 100 Mill Finish 6060 T5 1.08
808810 EX6502 12 4 100 100 Mill Finish 6060 T5 1.556
856315 EX6503 16 4 100 100 Mill Finish 6060 T5 2.764
814126 EX6504 20 4 100 100 Mill Finish 6060 T5 4.32
856318 EX6505 25 4 100 100 Mill Finish 6060 T5 6.752
808812 EX6506 40 4 160 160 Mill Finish 6106 T6 17.024
808814 EX6507 50 4 200 200 Mill Finish 6106 T6 28.1
905676 EX6508 65 2 260 260 Mill Finish 6106 T6 22.816
809426 EX6508 65 4 260 260 Mill Finish 6106 T6 45.632
Square
Solid
Capral Limited March 2011
37
39
Square
Hollows
41
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
815380 EH2913 12.7 6.5 100 100 Mill Finish 6060 T5 1.229
810990 EG8354 19.02 15.88 1.57 RAD 6.5 100 100 Mill Finish 6060 T5 1.885
811019 EK1333 19.05 1.2 6.5 100 100 Mill Finish 6060 T5 1.502
807904 EG5799 19.05 1.83 RAD 6.5 100 100 Mill Finish 6060 T5 2.21
808166 E22101 20 1.6 6.5 100 100 Mill Finish 6060 T5 2.074
813750 EL2299 20 3 6.5 100 100 Mill Finish 6060 T5 3.581
810378 E51872 20 3 RAD 6.5 100 100 Mill Finish 6060 T5 3.438
838612 E51872 20 3 RAD 6.5 100 100 Mill Finish 6063 T6 3.439
808512 E22103 25 1.6 6.5 100 100 Mill Finish 6060 T5 2.632
842495 EN3238 25 2 RAD 6 100 100 Mill Finish 6060 T5 2.982
815441 EL8003 25 3 6.5 100 100 Mill Finish 6060 T5 4.634
807853 E22120 25 3 RAD 6.5 100 100 Mill Finish 6060 T5 4.491
810372 E50413 25.4 1.2 RAD 6.5 100 100 Mill Finish 6060 T5 1.93
813594 EG1842 25.4 3.25 RAD 6.5 100 100 Mill Finish 6060 T5 5.05
815894 EQ1557 32 2 6.5 128 128 Mill Finish 6060 T5 4.212
813763 EL8005 32 3 6.5 128 128 Mill Finish 6060 T5 6.11
943280 EP10014 32 3 RAD 6.5 123 123 Mill Finish 6060 T5 6.032
810374 E51264 37.35 2.5 RAD 6.5 141 141 Mill Finish 6060 T5 5.824
939032 EP9743 38 2 6.5 151 151 Mill Finish 6060 T5 5.051
843824 EN9549 38 2 RAD 6.5 147 147 Mill Finish 6060 T5 4.946
841064 EG2803 38.1 2.92 RAD 6.5 152 152 Mill Finish 6060 T5 7.365
815436 EL7938 40 1.6 6.5 159 159 Mill Finish 6060 T5 4.316
877663 EP7163 40 1.6 RAD 7 154 154 Mill Finish 6060 T5 4.536
809876 EQ4000 40 2 6.5 160 160 Mill Finish 6060 T5 5.336
867229 EU7743 40 2.5 6.5 160 160 Mill Finish 6060 T5 6.578
807851 E22108 40 3 6.5 160 160 Mill Finish 6060 T5 7.793
808823 E73599 40 3 RAD 6.5 155 155 Mill Finish 6060 T5 7.702
938469 E73599 40 3 RAD 6.5 155 155 Mill Finish 6005A T5 7.703
877665 EP7164 40 3 RAD 7 154 154 Mill Finish 6060 T5 8.225
808513 E22109 45 2.5 6.5 180 180 Mill Finish 6060 T5 7.461
815917 EQ2259 50 1.6 5.5 200 200 Mill Finish 6060 T5 4.598
Square Hollows
A
T
Capral Limited March 2011
43
Square Hollows continued
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
812096 EQ2259 50 1.6 6.5 200 200 Mill Finish 6060 T5 5.434
938627 EQ6446 50 1.6 RAD 6.5 189 189 Mill Finish 6060 T5 5.174
855759 EB1003 50 2 6.5 200 200 Mill Finish 6060 T5 6.74
813768 EL8008 50 2.5 6.5 200 200 Mill Finish 6060 T5 8.333
840340 EB1004 50 3 6.5 200 200 Mill Finish 6060 T5 9.9
964226 EP10392 50 5 RAD 6.5 195 195 Mill Finish 6060 T5 15.672
905207 EL4998 50.8 1.83 RAD 6.1 192 192 Mill Finish 6060 T5 5.624
907998 EL4998 50.8 1.83 RAD 7.32 192 192 Mill Finish 6060 T5 6.749
813616 EK1537 50.8 2.03 RAD 6.5 192 192 Mill Finish 6060 T5 6.623
813618 EK1537 50.8 2.03 RAD 7.3 192 192 Mill Finish 6060 T5 7.438
807750 E11901 50.8 3.2 RAD 6.5 195 195 Mill Finish 6060 T5 10.387
808420 E11901 50.8 3.2 RAD 6.5 195 195 Mill Finish 6106 T6 10.387
835910 E11901 50.8 3.2 RAD 6.5 195 195 Mill Finish 6005A T5 10.387
884682 EP7619 50.8 4 RAD 6.8 194 194 Mill Finish 6082 T5 13.294
849871 EQ6382 65 2.5 6.5 259 259 Mill Finish 6060 T5 10.965
812251 EU2011 65 3 RAD 6.5 251 251 Mill Finish 6060 T5 13.058
813412 EU9613 75 2.25 RAD 6.5 291 291 Mill Finish 6106 T6 11.225
912600 EXP0149 75 3 6.5 300 300 Mill Finish 6060 T5 15.217
849548 EQ6032 75 3 RAD 6.5 290 290 Mill Finish 6060 T5 14.755
812177 EQ4171 76 6.35 RAD 6 277 277 Mill Finish 6060 T5 26.387
848221 EQ4171 76 6.35 RAD 6 277 277 Mill Finish 6082 T6 26.388
836420 E22119 100 3 RAD 6.5 398 398 Mill Finish 6060 T5 20.397
815375 EG7152 101.6 6.35 RAD 6.5 385 385 Mill Finish 6082 T5 40.632
A
R
R
2
1
T
Capral Limited March 2011
45
Tubes
47
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
816304 EX5001 10 1.2 6.5 100 100 Mill Finish 6060 T5 0.578
865941 EX5098 10 1.6 6.5 100 100 Mill Finish 6060 T5 0.735
813994 EX5004 12 1.6 6.5 100 100 Mill Finish 6060 T5 0.916
907662 EALH12576 14 1.5 4 100 100 Mill Finish 6060 T5 0.636
816213 EX2026 15.88 1.22 6 100 100 Mill Finish 6106 T6 0.912
851600 EX2028 15.88 1.63 6 100 100 Mill Finish 6060 T5 1.182
890673 EX5006 16 1.6 6.1 100 100 Mill Finish 6060 T5 1.19
814000 EX5006 16 1.6 6.5 100 100 Mill Finish 6106 T6 1.268
814011 EX5006 16 1.6 6.5 100 100 Mill Finish 6060 T5 1.268
890866 EX5006 16 1.6 7.3 100 100 Mill Finish 6060 T5 1.424
808547 E40149 19 1.2 6 100 100 Mill Finish 6060 T5 1.086
808548 E40149 19 1.2 6.5 100 100 Mill Finish 6060 T5 1.176
810632 E40149 19 1.2 7.3 100 100 Mill Finish 6060 T52 1.321
905702 E40149 19 1.2 7.3 100 100 Mill Finish 6060 T5 1.321
810652 E40201 19 3.2 6.5 100 100 Mill Finish 6060 T5 2.762
954542 EALH9075 19.05 1.6 7.3 100 100 Mill Finish 6060 T5 1.73
813927 EX2195 19.05 1.65 6.1 100 100 Mill Finish 6060 T5 1.482
814025 EX5008 20 1.6 6.5 100 100 Mill Finish 6060 T5 1.625
851607 EX2040 22.23 5.99 6 100 100 Mill Finish 6061 T6 4.95
814039 EX5010 25 1.6 6.5 100 100 Mill Finish 6060 T5 2.067
907408 E40519 25 2 6.5 100 100 Mill Finish 6005A T5 2.535
814046 EX5011 25 3 6.5 100 100 Mill Finish 6060 T5 3.633
814048 EX5011 25 3 7.5 100 100 Mill Finish 6060 T5 4.192
814057 EX5013 32 1.6 6.5 100 100 Mill Finish 6060 T5 2.684
905831 EX5110 32 2 6.5 100 100 Mill Finish 6005A T5 3.309
814060 EX5014 32 3 6.5 101 101 Mill Finish 6060 T5 4.797
951180 EX5014 32 3 6.5 101 101 Mill Finish 6060 T52 4.797
951174 EX2078 38.09 3.25 6.5 119 119 Mill Finish 6060 T52 6.24
808541 E40015 38.1 2 6.5 120 120 Mill Finish 6060 T5 3.985
810269 E40016 38.1 3.25 6.5 120 120 Mill Finish 6060 T5 6.246
A
T
Tubes
Capral Limited March 2011
49
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
856010 EX5022 60 3 6.5 188 188 Mill Finish 6060 T591 9.425
856150 EX5071 60 5 6 188 188 Mill Finish 6060 T591 13.998
946415 EX5071 60 5 6 188 188 Mill Finish 6060 T4 13.998
856149 EX5071 60 5 6.5 188 188 Mill Finish 6060 T5 15.165
814098 EX5074 60 6 6.5 188 188 Mill Finish 6060 T1 17.862
949554 EX2132 60.33 3.91 4.5 190 190 Mill Finish 6060 T1 8.447
940834 EX2132 60.33 3.91 6 190 190 Mill Finish 6060 T4 11.262
838353 E40098 63.5 3.96 6 199 199 Mill Finish 6060 T4 11.97
911427 EX2138 63.5 6.35 3.5 199 199 Mill Finish 6061 T6 10.773
946417 EX2138 63.5 6.35 6.4 199 199 Mill Finish 6060 T1 19.699
851889 EX2241 69.85 2.67 6 219 219 Mill Finish 6060 T5 9.15
808568 E40703 76 4.25 4.94 237 237 Mill Finish 6060 T1 11.974
912868 EX2152 76.19 3.25 6.5 239 239 Mill Finish 6060 T5 13.072
929686 EX2207 76.19 4.75 6.4 239 239 Mill Finish 6060 T1 18.406
859316 EX2153 76.19 6.35 6.5 239 239 Mill Finish 6060 T1 24.453
871062 EX2153 76.19 6.35 6.5 239 239 Mill Finish 6061 T6 24.453
930997 EP8552 76.2 3.8 6.5 239 239 Mill Finish 6060 T5 15.171
939406 EP8552 76.2 3.8 6.5 239 239 Mill Finish 6060 T4 15.171
812632 EX5023 80 2 6.5 251 251 Mill Finish 6060 T5 8.6
856027 EX5024 80 3 6.5 251 251 Mill Finish 6060 T5 12.74
808133 EX2161 88.9 5.33 6 279 279 Mill Finish 6082 T6 22.662
851712 EX2161 88.9 5.33 6 279 279 Mill Finish 6060 T5 22.662
816331 EX5026 100 3 6.5 314 314 Mill Finish 6060 T5 16.042
816239 EX2214 101.6 1.6 6.5 319 319 Mill Finish 6060 T5 8.827
947797 EX2170 101.6 6.35 4.8 319 319 Mill Finish 6060 T1 24.624
812578 EX2170 101.6 6.35 6 319 319 Mill Finish 6082 T6 30.78
851723 EX2170 101.6 6.35 6.5 319 319 Mill Finish 6061 T6 33.345
810364 E40682 127 2.8 6.5 399 399 Mill Finish 6060 T5 19.181
908543 E40664 150 3 6 471 471 Mill Finish 6060 T5 22.446
812541 EX2007 152.4 3.25 6 479 479 Mill Finish 6060 T5 24.672
851917 EX2277 168.28 4.75 3 529 529 Mill Finish 6106 T6 19.767
838483 E40634 203.2 3 4.8 638 638 Mill Finish 6060 T5 24.451
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
855977 EX5015 40 1.6 6.5 125 125 Mill Finish 6060 T5 3.387
855980 EX5016 40 2 6 125 125 Mill Finish 6060 T591 3.87
814070 EX5017 40 3 6.5 126 126 Mill Finish 6060 T5 6.123
939404 EX5017 40 3 6.5 126 126 Mill Finish 6060 T4 6.123
903904 EX2096 43.18 4.39 6 136 136 Mill Finish 6060 T5 8.67
951178 EX2101 44.45 3.25 3.5 139 139 Mill Finish 6060 T52 3.976
951182 EX2101 44.45 3.25 4 139 139 Mill Finish 6060 T52 4.544
813915 EX2101 44.45 3.25 5.5 139 139 Mill Finish 6060 T52 6.247
969202 EALH0417 44.5 3.2 6.5 140 140 Mill Finish 6060 T591 7.287
924637 EXP0190 47.63 1.42 6 145 145 Mill Finish 6060 T5 3.36
807877 E40718 48.3 3.25 5.5 152 152 Mill Finish 6060 T5 6.831
812582 EX2202 48.41 4.47 6 152 152 Mill Finish 6061 T6 9.996
872738 EX2202 48.41 4.47 6 152 152 Mill Finish 6060 T5 9.996
851832 EX2202 48.41 4.47 6.1 152 152 Mill Finish 6005A T5 10.163
851840 EX2202 48.41 4.47 6.1 152 152 Mill Finish 6061 T6 10.163
813578 EX2202 48.41 4.47 6.5 152 152 Mill Finish 6060 T591 10.829
855991 EX5018 50 1.6 6.5 157 157 Mill Finish 6060 T5 4.271
856085 EX5041 50 3 6 157 157 Mill Finish 6005A T5 7.176
814095 EX5041 50 3 6.5 157 157 Mill Finish 6060 T591 7.774
856086 EX5041 50 3 6.5 157 157 Mill Finish 6005A T5 7.774
951172 EX5041 50 3 6.5 157 157 Mill Finish 6060 T52 7.774
814111 EX5081 50 4 5.5 157 157 Mill Finish 6060 T52 8.585
810128 EX5081 50 4 6 157 157 Mill Finish 6060 T5 9.366
881116 EX5081 50 4 6 157 157 Mill Finish 6060 T4 9.366
814115 EX5081 50 4 6.5 157 157 Mill Finish 6060 T5 10.146
869008 EX5081 50 4 6.5 157 157 Mill Finish 6005A T5 10.147
946413 EP7790 50 5 6 157 157 Mill Finish 6060 T4 11.454
815218 E40545 50 6 6 157 157 Mill Finish 6060 T5 13.428
814604 EX2127 57.15 5.38 6 180 180 Mill Finish 6106 T6 14.178
810138 EX5021 60 2 6.5 188 188 Mill Finish 6060 T5 6.396
814086 EX5022 60 3 6.5 188 188 Mill Finish 6060 T5 9.425
856010 EX5022 60 3 6.5 188 188 Mill Finish 6060 T591 9.425
Tubes continued
Capral Limited March 2011
Drawn
Tube
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
600942 EXP0106 10 1 6 100 100 Mill Finish 6060 H81 0.456
600994 E-1214 12.7 1.42 5.5 Mill Finish 6060 T81 0.748
600853 EP8510 15.88 1.42 5.5 100 100 Mill Finish 6060 T81 0.957
600856 EP8511 19.05 1.42 5.5 111 100 Mill Finish 6060 T81 1.166
600324 E-2214 22.23 1.42 5.5 Mill Finish 6060 T81 1.381
600255 E-2514 25.4 1.42 5.5 Mill Finish 6060 T81 1.59
600256 E-2814 28.58 1.42 5.5 Mill Finish 6060 T81 1.799
600054 E-3216 32 1.6 6 Mill Finish 6060 T81 2.478
A
T
Capral Limited March 2011
51
53
Round
Bar
55
Material
No.
Die No A
mm
B
mm
T
m
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
910880 EXP0091 4 100 100 Mill Finish 6060 T5 0.344
814954 EX6000 10 4 100 100 Mill Finish 6060 T5 0.844
816362 EX6001 12 4 100 100 Mill Finish 6060 T5 1.22
808384 EX6002 16 4 100 100 Mill Finish 6060 T5 2.172
812662 EX6002 16 4 100 100 Mill Finish 6061 T6 2.172
962474 EX6002 16 4.3 100 100 Mill Finish 6060 T5 2.335
856255 EX6002 16 6 100 100 Mill Finish 6005A T5 3.258
808385 EX6003 20 4 100 100 Mill Finish 6060 T5 3.392
808794 EX3000 25.4 4 100 100 Mill Finish 6060 T5 5.468
851947 EX3000 25.4 4 100 100 Mill Finish 6061 T6 5.468
601076 EXP0294 26 3.66 100 100 Mill Finish 6262 T91 5.237
809459 E20306 30 4 100 100 Mill Finish 6061 T6 7.636
816367 EX6005 33 4 104 104 Mill Finish 6061 T6 9.236
908395 EX6006 39 3.6 123 123 Mill Finish 2011 T6 12.085
808802 EX6006 39 4 123 123 Mill Finish 6106 T6 13.428
911013 EX6007 42 3.6 132 132 Mill Finish 2011 T6 14.634
909446 EX6008 45 3.6 141 141 Mill Finish 2011 T6 15.455
908397 EX6010 50 3.6 157 157 Mill Finish 2011 T6 19.084
812675 EX6010 50 4 157 157 Mill Finish 6061 T6 21.204
908000 EX6011 55 1.8 173 173 Mill Finish 2011 T6 11.547
908399 E20315 60 1.8 188 188 Mill Finish 2011 T6 13.741
809463 E20315 60 4 188 188 Mill Finish 6061 T6 30.536
881422 E20315 60 4.2 188 188 Mill Finish 6061 T6 32.063
905812 EX3058 60.33 4 190 190 Mill Finish 6061 T6 30.872
908012 EX6012 65 1.8 204 204 Mill Finish 2011 T6 16.126
808808 EX6012 65 3 204 204 Mill Finish 6061 T6 26.877
909448 EX6013 70 1.8 220 220 Mill Finish 2011 T6 18.704
861930 EX6013 70 4 220 220 Mill Finish 6061 T6 41.564
906198 EX6014 75 1.8 236 236 Mill Finish 2011 T6 22.345
808796 EX3066 76.19 2 239 239 Mill Finish 6061 T6 25.622
893428 EX6015 80 1.5 251 251 Mill Finish 2011 T6 21.127
A
Round Bar
Capral Limited March 2011
57
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
893430 EX6016 90 1.5 283 283 Mill Finish 2011 T6 26.786
893432 EX6017 100 1.5 314 314 Mill Finish 2011 T6 31.809
907980 EX3099 101.6 2 319 319 Mill Finish 6061 T6 43.78
893434 EX6018 110 1.5 346 346 Mill Finish 2011 T6 40.541
910098 EXP0076 120 1.5 100 100 Mill Finish 2011 T6 48.387
893166 EX6019 130 1.5 408 408 Mill Finish 2011 T6 55.556
893168 EX6020 140 1.5 440 440 Mill Finish 2011 T6 65.217
893170 EX6085 150 1.5 471 471 Mill Finish 2011 T6 75
893442 EX6021 160 1.5 503 503 Mill Finish 2011 T6 83.333
910198 EX6022 210 1.5 660 660 Mill Finish 2011 T6 146.54
Round Bar Continued
A
Capral Limited March 2011
Machine
Rod
Material
No.
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom
Mass
600904 EXP0074 6 3.6 100 100 Mill Finish 2011 T3 0.288
600892 EAL4066 8 3.6 100 100 Mill Finish 2011 T3 0.504
600708 EX6000 10 3.6 100 100 Mill Finish 2011 T3 0.767
600712 EX6001 12 3.6 100 100 Mill Finish 2011 T3 1.16
600710 EX6002 16 3.6 100 100 Mill Finish 2011 T3 1.962
600907 EAL4072 18 3.6 100 100 Mill Finish 2011 T3 2.592
600722 EX6003 20 3.6 100 100 Mill Finish 2011 T3 3.064
600724 E20303 22 3.6 100 100 Mill Finish 2011 T3 3.708
600862 E20304 24 3.6 100 100 Mill Finish 2011 T3 4.396
600726 EX3000 25.4 3.6 100 100 Mill Finish 2011 T3 5.2
600728 EX6004 27 3.6 100 100 Mill Finish 2011 T3 5.835
600730 E20306 30 3.6 100 100 Mill Finish 2011 T3 7.19
600732 EX6005 33 3.6 104 104 Mill Finish 2011 T3 8.675
600734 EX6036 36 3.6 113 113 Mill Finish 2011 T3 10.42
924915 EXP0201 165 1.5 520 520 Mill Finish 2011 T6 88.236
866656 EX3096 190.5 1.5 598 598 Mill Finish 2011 T6 120.87
Capral Limited March 2011
A
59
61
Miscellaneous
Extrusion
63
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
314792 Cornerstake
43mm Suit
EK1537
Cornerstake
43mm Suit
EK1537
0.043
809630 E25493 6063
T6 6.05m
Mill Finish
Domestic Stair
Tread 250x38
E25493 6.05 1014 350 Mill
Finish
906878 EME31156 6060
T5 2.4m
Mill Finish
Slat Wall
28x13.5
EME31156 2.4 136 100 Mill
Finish
954069 EAL23923 6060
T5 6.5m Mill Finish
Louvre Blade
79x15
EAL23923 6.5 161 161 Mill
Finish
809571 E22084 6060
T5 6.5m Mill Finish
Zed
22x19x19x3.0
E22084 6.5 114 114 Mill
Finish
838822 E53450 6060
T5 4m Mill Finish
Bus Stair Tread
51x35
E53450 4 178 100 Mill
Finish
934619 EAL12212 6060
T5 3.3m Mill Finish
Spray Booth
X316
EAL12212 3.3 349 145 Mill
Finish
808734 EE2611 6060
T5 4.0m Mill Finish
Bull Nose
Stair Tread
46.02x15.06
EE2611 4 123 123 Mill
Finish
927950 EME30371 6060
T5 3.6m Mill Finish
Shutter Rail
28.7x22.73
EME30371 3.6 107 107 Mill
Finish
934590 EME8341 6060
T5 3.3m Mill Finish
Shower Screen
Top Rail
EME8341 3.3 156 156 Mill
Finish
860754 EP6658 6060
T5 6.5m Mill Finish
Gate Frame L
40x40x2
EP6658 6.5 159 159 Mill
Finish
849677 EQ6210 6060
T5 6m Mill Finish
Gate Track
60x18
EQ6210 6 147 100 Mill
Finish
850203 ET2436 6060
T5 3.657m
Mill Finish
Ticket Strip
31.75
ET2436 3.657 100 100 Mill
Finish
931040 EXP0273 6060
T5 6.5m Mill Finish
38mm F
Section
EXP0273 6.5 224 224 Mill
Finish
931063 EXP0279 6060
T5 5.11m
Mill Finish
Rope Track EXP0279 5.11 108 108 Mill
Finish
Miscellaneous Extrusions
Capral Limited March 2011
Diagram Material
No.
Material
Description
Market
Description
Die No Length AP PP Finish
952686 EP10720 6060
T5 6.5m
Mill Finish
Square hollow
50x2.00x20
LEG RAD
EP10720 6.5 268 268 Mill
Finish
952712 EP10719 6060
T5 6.5m Mill
Finish
Square hollow
50x2.00x20
LEG RAD
EP10719 6.5 347 347 Mill
Finish
952714 EP10721 6060 T5
6.5m Mill Finish
Square hollow
50x2.00x20
LEG RAD
EP10721 6.5 347 347 Mill
Finish
305830 Slim Line SPAR
94 40 MF 6351
T6 6.5m
EJ2033MF
355650
808386 E00161 6060
T1 4.0m Mill Finish
Fluted bar
38.1x4
E00161 4 100 100 Mill
Finish
808387 E00161 6060
T5 4.0m Mill Finish
Fluted bar
38.1x4
E00161 4 100 100 Mill
Finish
838737 E53064 6060
T5 6.5m Mill Finish
Gate track E53064 6.5 277 277 Mill
Finish
811534 EN8354 6060
T5 2.4m Mill Finish
Display panel
trim 28x13.7
EN8354 2.4 128 100 Mill
Finish
884711 ET6847 6060
T1 5 Mill Finish
Moulding
31.75 16.25
ET6847 5 108 100 Mill
Finish
Other
Geometric
Shapes
65
67
Moulds
and Trims
69
Diagram Material
No.
Material
Description
Market
Description
Die no Length Ap Pp Finish
813599 EG6449
(E00144) 6060
T1 4.0m
Mill Finish
Crescent mould
25.4x4.75
RAD
EG6449 4 100 100 Mill
Finish
808736 EE3388 6060
T1 4.0m
Mill Finish
Table edge
27.7x12.7
RAD
EE3388 4 100 100 Mill
Finish
841153 EG6444 6060
T1 4m
Mill Finish
Crescent mould
15.88x4.75
RAD
EG6444 4 100 100 Mill
Finish
810983 EG6448 6060
T1 4.0m
Mill Finish
Crescent mould
31.75x4.75
RAD
EG6448 4 100 100 Mill
Finish
808372 EG6454 6060
T1 4.0m
Mill Finish
J-Trim
23.8x12.7
EG6454 4 100 100 Mill
Finish
812157 EG6454 6060
T5 4.0m
Mill Finish
J-Trim
23.8x12.7
EG6454 4 100 100 Mill
Finish
808373 EH1600 6060
T1 5.0m
Mill Finish
Moulding
Windscreen U FIN
19.06x10.88
EH1600 5 100 100 Mill
Finish
810996 EH2351 6060
T1 4.0m
Mill Finish
Table Edge
20.62x6.73
RAD
EH2351 4 100 100 Mill
Finish
810998 EH2919 6060
T5 5.01m
Mill Finish
Wallboard edge
21.29x8 5.5
GAP
EH2919 5.01 100 100 Mill
Finish
808744 EH2989 6060
T1 4.0m
Mill Finish
Crescent Mould
38.1x4.75
RAD
EH2989 4 100 100 Mill
Finish
935020 EH2989 6060
T1 5m
Mill Finish
Crescent Mould
38.1x4.75
RAD
EH2989 5 100 100 Mill
Finish
929357 Eme31137 6060
T5 3.66m
Mill Finish
Tilers angle EME31137 3.66 100 100 Mill
Finish
808326 ET2894 6060
T5 4.0m
Mill Finish
H- Trim
381x12.7 Gap
ET2894 4 140 140 Mill
Finish
Moulds and Trims
Capral Limited March 2011
71
Qubelok
Extrusion
73
Diagram Material
No.
Material
Description
Market
Description
Die No Length AP PP Finish
807906 EH4487
(E37863) 6060
T5 6.5m
Mill Finish
Qubelok
25.4x25.4x1.2
RAD
EH4487 6.5 100 100 Mill
Finish
811556 EN9673 6060
T5 6.0m
Mill Finish
Qubelok
25.425.4
7.5mm receptor
EN9673 6 143 114 Mill
Finish
808021 ET7200 6060
T5 6.5m
Mill Finish
Qubelok
25.4x25.4
One leg
ET7200 6.5 114 114 Mill
Finish
Qubelok Extrusion
Capral Limited March 2011
75
Diagram Material
No.
Material
Description
Market
Description
302401 Adjustable foot [F]
302303 Adjustable foot [M] Inserts into MNTC006 (pk=100)
302198 Endcap 50 square nylon bk Endcap 50 sq nylon (pk=100)
308807 Insert round suits 25x1.0-3.0 Insert round suits 25x1.0-3.0
308811 Insert square suits
50.8x50.8x2.0-3.2
Insert square suits
50.8x50.8x2.0-3.2
300333 Qubelok 2 leg p20
Connector bk
Qubelok 2 leg p20
Connector bk
300334 Qubelok 3 leg p30
Connector bk
Qubelok 3 leg p30
Connector bk
300335 Qubelok 3 leg p31
Connector bk
Qubelok 3 leg p31
Connector bk
300336 Qubelok 4 leg p40
Connector bk
Qubelok 4 leg p40
Connector bk
300337 Qubelok 4 leg p41
Connector bk
Qubelok 4 leg p41
Connector bk
300338 Qubelok 5 leg p50
Connector bk
Qubelok 5 leg p50
Connector bk
300339 Qubelok 6 leg p60
Connector bk
Qubelok 6 leg p60
Connector bk
Qubelok Accessories
Capral Limited March 2011
77
Diagram Material
No.
Material
Description
Market
Description
300341 Qubelok castor p13 colour bk Qubelok castor p13 colour bk
300342 Qubelok castor socket p15 bk Qubelok castor socket p15 bk
300340 Qubelok endcap 25 sq plas bk Qubelok endcap 25 sq plas bk
301504 Rect ins 100x50x2-4mm Black plastic
301553 Square ins 25x103mm Black plastic
Qubelok Accessories continued
Capral Limited March 2011
79
Seating
Accessories
81
Diagram Material
No.
Material Description Market Description
300324 Seat Backrest Endcap MF Seat Backrest Endcap Nonh MF
300325 Seat Park Table Set 1800 Green Seat Park Table Set 1800
Green
302297 Seat Park Table Set 1800 Mill
306537 Seat Park Table Set 1800 Space
Blue
Seat Park Table Set 1800 Space
Blue
300322 Seat Plank Cast Endcap MF Seat Plank Cast Endcap MF
300326 Seat Supp Type 2A MF
400mm (Nobackrest)
Seat Supp Type 2A MF
400mm (Nobackrest)
307831 Seat Supp Type 2D MF 500mm
(No Backrest)
Seat Supp Type 2D MF 500mm
(No Backrest)
300327 Seat Supp Type 4A 400mm Inc
Seat Std (Nb)
Mill Finish
301621 Seat Supp Type 4B 350mm Inc
Seat Primary
Mill Finish
301734 Seat Supp Type 4C 300mm Inc
Seat Infant
Mill Finish
307832 Seat Supp Type 4D MF 500mm
(No Backrest)
Seat Supp Type 4D MF 500mm
Inc Seat (No Backrest)
Seating Accessories
Capral Limited March 2011
83
Seating Accessories continued
Diagram Material
No.
Material Description Market Description
307834 Seat Supp Type 6D 500mm
Inc seat (Backrest)
Seat Supp Type 6A 500mm Inc
Seat MF (Backrest)
300328 Seat Support Type 5A MF
400mm (Backrest)
Seat Support Type 5A MF
400mm (Backrest)
300329 Seat Support Type 6A MF
400mm (Backrest)
Seat Support Type 6A MF
400mm (Backrest)
300330 Seat Support Type 7A 400 MF
(No Backrest)
Seat Support Type 7A 400 MF
(No Backrest)
306541 Seat Park Table Set 1800
Black Gloss
Seat Park Table Set 1800
Black Gloss
Capral Limited March 2011
Scaffold
Plank
Diagram Material
No
Material
Description
Market
Description
Die No Length Ap Pp Finish
300331 Scaffold Plank 6m
MF 6106 T6
Scaffold Plank
6m MF
300683 Scaffold Plank 5m
MF 6106 T6
Scaffold Plank
5m MF
301224 Scaffold Plank 4m
MF 6106 T6
Scaffold Plank
4m MF
301299 Scaffold Plank 3m
MF 6106 T6
Scaffold Plank
3m MF
300332 Scaffold Plank End
Std Finish Capral
Scaffold Plank
End Std Finish
945001 EP9108 6106 T6
6.1m Mill Finish
Trestle Section
56.3x36.3
EP9108 6.1 177 177 Mill
FinIsh
Capral Limited March 2011
85
87
Transport
Sections
89
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
701282 EP8105 6106
T6 13.1m
MF Knurled
Transport Air
Flow Flooring
255x43
EP8105 13.1 1113 1113 Mill
Finish
711792 EN1595 6106
T6 0.06m
Mill Finish
Rope Rail
Bracket
EN1595 0.06 392 392 Mill
Finish
808177 E26946 6060
T5 6.5m
Mill Finish
Bullbar
148x100x6.0
RAD
E26946 6.5 675 343 Mill
Finish
849504 EQ5926 6060
T5 3.6m
Mill Finish
Tld Bus
Window Sill
57.8x34.2
EQ5926 3.6 272 105 Mill
Finish
891692 E26946 6060
T5 2.76m
Mill Finish
Bullbar
148x100x6.0
RAD
E26946 2.76 675 343 Mill
Finish
892684 E31781 6106
T6 1.835m
Mill Finish
Flooring
Section
184x32.5
E31781 1.835 536 150 Mill
Finish
938765 E35781 6060
T5 4.65m
Mill Finish
Bullbar
128x75x6.0
RAD
E35781 4.65 527 268 Mill
Finish
947377 EN9602 6082
T6 6m
Mill Finish
Stock Crate
Siding 170x11
EN9602 6 437 437 Mill
Finish
947379 EN9602 6082
T6 8m
Mill Finish
Stock Crate
Siding 170x11
EN9602 8 437 437 Mill
Finish
948287 EP10447 6060
T4 2.71m
Mill Finish
Channel
304.8x101
6x8.90
RAD (Bullbar)
EP10447 2.71 973 973 Mill
Finish
911979 EAL10711 6063
T6 4.58m
Mill Finish
Headboard
225x25
EAL10711 4.58 624 624 Mill
Finish
Transport Sections
Capral Limited March 2011
91
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
912267 EAL22938 6063
T6 6.7m Mill
Finish
Sideboard
Cap Extension
100.1X25
EAL22938 6.7 368 145 Mill
Finish
911914 EAL22939 6106
T6 4.88m Mill
Finish
Coaming
Side 4 Tonne
101X31.25
EAL22939 4.88 327 123 Mill
Finish
910947 EAL22940 6005a
T5 1.842m
Mill Finish
Flooring Plank
176.34x41
EAL22940 1.842 578 164 Mill
Finish
912133 EAL22940 6005a
T5 4.255m
Mill Finish
Flooring Plank
176.34x41
EAL22940 4.255 578 164 Mill
Finish
912913 EAL22940 6005a
T5 4.572m
Mill Finish
Flooring Plank
176.34x41
EAL22940 4.572 578 164 Mill
Finish
912269 EAL22941 6005a
T5 8.62m
Mill Finish
Coaming Side
16 Tonne
138.6x37
EAL22941 8.62 415 155 Mill
Finish
912281 EAL22942 6005a
T5 2.46m
Mill Finish
Flooring Plank
168.41x73
EAL22942 2.46 751 160 Mill
Finish
912285 EAL22943 6063
T6 4.572m
Mill Finish
Flush Rear
Coaming
EAL22943 4.572 273 100 Mill
Finish
912291 EAL22944 6005a
T5 1.842m
Mill Finish
Flooring 4 Tonne
Front Plank
154.5x70.8
EAL22944 1.842 604 193 Mill
Finish
912293 EAL22944 6005a
T5 4.572m
Mill Finish
Flooring 4 Tonne
Front Plank
154.5x70.8
EAL22944 4.572 604 193 Mill
Finish
912137 EAL22949 6005a
T5 1.816m
Mill Finish
Flooring Plank
186.8x25.4
EAL22949 1.816 456 167 Mill
Finish
952702 EAL22949 6005a
T5 1.83m
Mill Finish
Flooring Plank
186.8x25.4
EAL22949 1.83 456 167 Mill
Finish
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
912897 EAL10712 6106
T6 4m
Mill Finish
Heavy Duty 2
Tonne Floor
EAL10712 4 550 550 Mill
Finish
952157 EAL10712 6106
T6 1.83m
Mill Finish
Heavy Duty 2
Tonne Floor
EAL10712 1.83 550 550 Mill
Finish
911611 EAL22931 6005a
T5 3.935m
Mill Finish
Flooring 1-2
Tonne Plank
188x25.5
EAL22931 3.935 498 160 Mill
Finish
912129 EAL22931 6005a
T5 1.842m
Mill Finish
Flooring 1-2
Tonne Plank
188x25.5
EAL22931 1.842 498 160 Mill
Finish
952704 EAL22931 6005a
T5 1.83m
Mill Finish
Flooring 1-2
Tonne Plank
188x25.5
EAL22931 1.83 498 160 Mill
Finish
912257 EAL22932 6063
T6 6.5m
Mill Finish
Drop Side
250x30
EAL22932 6.5 768 384 Mill
Finish
912259 EAL22932 6063
T6 6.7m
Mill Finish
Drop Side
250x30
EAL22932 6.7 768 384 Mill
Finish
912261 EAL22933
6005A T5 2.46m
Mill Finish
Flooring plank
192.85X40
EAL22933 2.46 632 166 Mill
Finish
910876 EAL22934 6005a
T5 3.935m
Mill Finish
Flooring 1-2
Tonne Front
Plank 151x51
EAL22934 3.935 514 185 Mill
Finish
910878 EAL22935 6063
T6 3.935m
Mill Finish
Coaming Rear
1-2 Tonne
80x40
EAL22935 3.935 291 100 Mill
Finish
912263 EAL22936 6063
T6 4.58m
Mill Finish
Coaming Side
80x32
EAL22936 4.58 291 100 Mill
Finish
912911 EAL22936 6063
T6 4.88m
Mill Finish
Coaming Side
80x32
EAL22936 4.88 291 100 Mill
Finish
Transport Sections continued
Capral Limited March 2011
93
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
841892 EL7582 6082
T5 3.66m
Mill Finish
Flooring Truck
189.32x25.4
EL7582 3.66 551 551 Mill
Finish
711794 EL7667 6106
T6 0.04m
Mill Finish
Rope Rail
Bracket
75x34.5
EL7667 0.04 272 272 Mill
Finish
842877 EN4826 6061
T6 2.5m
Mill Finish
Truckbody
Aon Plate
EN4826 2.5 503 503 Mill
Finish
939402 EQ1364 6060
T4 6m
Mill Finish
Channel
128x75x6 RAD
(Bullbar)
EQ1364 6 533 282 Mill
Finish
849288 EQ5709 6060
T5 5m
Mill Finish
Floor Trap
Mould
45x19.83
EQ5709 5 168 100 Mill
Finish
812238 ET2633 6106
T6 4.88m
Mill Finish
Rubrail Single
74.59x23
79x1.57
ET2633 4.88 214 214 Mill
Finish
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
912917 EAL22951 6063
T6 4.6m
Mill Finish
Lgt Duty Flush
& Coaming
1tonne
117.15x53.8
EAL22951 4.6 441 100 Mill
Finish
912303 EAL22952 6063
T6 6.7m
Mill Finish
Drop Side
223.43x25
EAL22952 6.7 617 445 Mill
Finish
910084 EAL22953 6060
T5 7m
Mill Finish
Rub Rail
101.6x13
EAL22953 7 227 119 Mill
Finish
908457 EAL22954 6060
T5 7m
Mill Finish
Rub Rail
76.2x12.7
EAL22954 7 179 100 Mill
Finish
909300 EAL2361 6060
T5 6.5m
Mill Finish
Transport
Rub Rail
74.6x23.8
EAL2361 6.5 215 215 Mill
Finish
951176 E40699 6060
T52 5.5m
Mill Finish
Tube 48.4x4.5 E40699 5.5 152 152 Mill
Finish
808371 EE4099 6060
T5 6.5m
Mill Finish
Rubrail Double
109.5x19.05
EE4099 6.5 318 318 Mill
Finish
855824 EE4099 6061
T6 4.88m
Mill Finish
Rubrail Double
109.5x19.05
EE4099 4.88 318 318 Mill
Finish
841048 EG1431 6060
F 5m
Mill Finish
Transport
Drip Mould
30.15x25.58
EG1431 5 120 120 Mill
Finish
904366 EG2739
(ME4949) 6060
T5 5.7m
Mill Finish
Headboard
228.6x22.23
EG2739 5.7 678 342 Mill
Finish
904444 EG2739
(ME4949) 6063
T6 6.5m
Mill Finish
Headboard
228.6x22.23
EG2739 6.5 678 342 Mill
Finish
Transport Sections continued
Capral Limited March 2011
95
Marine
Sections
97
Diagram Material
No.
Material
Description
Market
Description
Die no Length Ap Pp Finish
837969 E36378 6106
T6 9m Mill Finish
Pontoon Handrail
75x65x2.5 RAD
E36378 9 275 217 Mill
Finish
880447 E40038 6106 T5
6m Mill Finish
Tube 82.55x5.7 E40038 6 259 259 Mill
Finish
838761 E53192 6060 T5
6.5m Mill Finish
Gunwale 50x25 E53192 6.5 220 109 Mill
Finish
841040 Ee4200 6061 t6
4m Mill Finish
Marine Sailtrack
31.75x11.89x3.18
Ee4200 4 119 100 Mill
Finish
808117 El6940 6082 T6
6.0m Mill Finish
DNV
Bulb Flat
98.7x19.05
El6940 6 227 227 Mill
Finish
842212 El9436 6060 T5
6m Mill Finish
Marine Oyster Punt
228x50
El9436 6 555 555 Mill
Finish
885226 El9436 6060 T5
8m Mill Finish
Marine Oyster Punt
228x50
El9436 8 555 555 Mill
Finish

847680 Eq1633 6060
T591 5m Mill
Finish
Top Hat
63.5x31.75 RAD
Eq1633 5 238 122 Mill
Finish
847866 Eq3279 6060 T5
7m Mill Finish
Gunwale 47x32 Eq3279 7 205 107 Mill
Finish
814927 Eq3462 6060
t591 6.0m Mill
Finish
Internal Boat
Coaming
Eq3462 6 260 114 Mill
Finish
813425 Eu9824 6060 T5
6.5m Mill Finish
Marine Gunwale
39x25
Eu9824 6.5 144 100 Mill
Finish
849932 Eq6427 6060 T5
8m Mill Finish
Marine Pontoon
Stringer
101x100x2.3
Eq6427 8 441 441 Mill
Finish
Diagram Material
No.
Material
Description
Market
Description
Die no Length Ap Pp Finish



947250 E40263 6063 T6
6.5m Mill Finish
Tube 152.4x2.4 E40263 6.5 479 479 Mill
Finish
Yacht masts
Marine Sections
Capral Limited March 2011
99
Coolroom
& Portable
Buildings
101
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
889369 EP7868 6060 T5
6.5m
Mill Finish
Cool Room Suite
78X25X1.5
EP7868 6.5 252 128 Mill
Finish
909280 EAL12220
6060 T5 6.5m
Mill Finish
Coolroom
Coving 50mm
Eal12220 6.5 183 100 Mill
Finish
909284 EAL12290 6060
T5 6.5m
Mill Finish
Coolroom Door-
jamb 54x31
Eal12290 6.5 204 117 Mill
Finish
908451 EAL12443 6060
T5 6.5m
Mill Finish
Coolroom Track
90x56
Eal12443 6.5 303 303 Mill
Finish
909278 EAL12509
6060 T5 6.5m
Mill Finish
Coolroom
Corner Prole
Eal12509 6.5 468 133 Mill
Finish
813605 EH7644
(E00229) 6060
T5 6.5m
Mill Finish
Rope Track
28.17x12.53
Eh7644 6.5 100 100 Mill
Finish

809104 E14698 6060
T5 6.5m
Mill Finish
Wallboard H
Section 34.5x9
E14698 6.5 138 100 Mill
Finish
809252 E18699 6060
T5 6.5m
Mill Finish
Coolroom
Coving 50x50
E18699 6.5 204 102 Mill
Finish
809875 E30278 6060
T5 6.0M
Mill Finish
Rope Track
2 Throat
27.5x12.2
E30278 6 129 100 Mill
Finish
837228 E32045
(AL11870) 6060
T5 6.5m MF
Channel 81x38
(Coolroom)
E32045 6.5 311 311 Mill
Finish
837902 E36063 6060
T5 6.5m
Mill Finish
Coolroom Top
Track 148x40
E36063 6.5 469 469 Mill
Finish
813754 EL3317
(E50927) 6060
T5 6.5m
Mill Finish
Rope Track
Flange 43.4x10
El3317 6.5 129 100 Mill
Finish
Coolroom & Portable Buildings
Capral Limited March 2011
103
Coolroom & Portable Buildings continued
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
808694 ET4834
(Al7357) 6060
T5 6.5m MF
Coolroom
Channel
117.47x25.4xrad
ET4834 6.5 328 172 Mill
Finish
809882 ET4837
(Al3261) 6060
T5 6.5m MF
Channel
92.07x25.4
ET4837 6.5 277 277 Mill
Finish
808775 ET7490 6060
T5 6.5m
Mill FinIsh
Coolroom
Arrowhead Trim
50.6x25.4
ET7490 6.5 143 100 Mill
Finish
812286 EU6648 6060
T5 6.5m
Mill Finish
Coolroom
Coving
75x75
EU6648 6.5 271 133 Mill
Finish
910976 EXP0099 6060
T5 6.5m
Mill Finish
Cover Adaptor
Coolroom
EXP0099 6.5 169 169 Mill
Finish
931084 EXP0284 6060
T5 6.5m
Mill Finish
Coolroom Door
Frame
EXP0284 6.5 100 100 Mill
Finish
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
808570 E51261 6060
T5 6.5m
Mill Finish
I Beam 54x48x1.5 E51261 6.5 297 102 Mill
Finish
808578 E61129 6060
T5 6.5m
Mill Finish
I Beam
54x50.8x1.6
E61129 6.5 305 305 Mill
Finish
912321 ED7672 6060
T5 6.5m
Mill Finish
ChaNnel 92x25
(Coolroom)
Ed7672 6.5 278 145 Mill
Finish
808753 El8340 6060
T5 6.5m
Mill Finish
Coolroom Coving
50x50
El8340 6.5 181 100 Mill
Finish
810134 El8529
(E38057) 6060
T5 6.5m Mill
Finish
Coolroom -Chan-
nel 55.8x30x1.5
El8529 6.5 229 121 Mill
Finish
808374 El8530
(E37925) 6060
T5 6.5m
Mill Finish
Coolroom
Coving 35x35
El8530 6.5 119 119 Mill
Finish
811538 EN8888 6060
T5 6.5m
Mill Finish
Coolroom Door
Frame Channel
54x30.7
En8888 6.5 203 113 Mill
Finish
815799 EP5139 6060
T5 6.5m
Mill Finish
CoolrooM Chan-
nel 156x38.5
Ep5139 6.5 463 463 Mill
Finish
807999 EQ3077 6060
T5 6.5m
Mill Finish
Coolroom Chan-
nel 105x38x1.5
Eq3077 6.5 360 100 Mill
Finish
815937 EQ4034 6060
T5 6.5m
Mill Finish
Coolroom Corner
Mould 35x35
Eq4034 6.5 121 100 Mill
Finish
848422 EQ4712 6106
T6 6.5m
Mill Finish
Coolroom Door
Track 71.5x30
Eq4712 6.5 285 285 Mill
Finish
850221 ET4833
(Al3260) 6060
T5 6.5m MF
Channel
168.27x25.4 RAD
Et4833 6.5 429 429 Mill
Finish
Capral Limited March 2011
105
Signs
107
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
807751 E16052 6060
T5 6.5m
Mill Finish
Sign Brace
28.5x25.5
Ret Leg
E16052 6.5 183 183 Mill
Finish
808436 E16052 6060
T5 5.1m
Mill Finish
Sign Brace
28.5x25.5
Ret Leg
E16052 5.1 183 183 Mill
Finish
809730 E26860 6060
T5 5.5m
Mill Finish
Sign 210mm
Street Sign
E26860 5.5 543 233 Mill
Finish
896973 EME6379 6060
T5 3.66m
Mill Finished
Sign
149.45mm
Street Sign
EME6379 3.66 348 100 Mill
Finish
896974 EME6505 6060
T5 3.66m
Mill Finished
Sign
199.45mm
Street Sign
EME6505 3.66 448 448 Mill
Finish
944395 EP10260 6060
T5 6.5m
Mill Finish
Sign Stiffener
44x40
EP10260 6.5 294 104 Mill
Finish
947410 EME8261 6060
T5 2.7m
Mill Finish
Railway Sign EME8261 2.7 492 492 Mill
Finish
953334 EAL12417 6060
T5 6.5m Mill
Finish
Sign Box EAL12417 6.5 612 249 Mill
Finish
810003 E32175 6060
T5 6.5m
Mill Finish
Sign 200mm
Sign Box
E32175 6.5 655 249 Mill
Finish
808182 E32391 6060
T5 6.5m
Mill Finish
Sign 150mm
Sign Box
E32391 6.5 528 191 Mill
Finish
810079 E33394 6060
T5 6.0m
Mill Finish
Sign 150mm
Street Sign
E33394 6 357 203 Mill
Finish
810081 E33395 6060
T5 6.0m
Mill Finish
Sign 199mm
Street Sign
E33395 6 454 254 Mill
Finish
Signs
Capral Limited March 2011
109
Diagram Material
No.
Material
Description
Market
Description
Die No Length Ap Pp Finish
837412 E33479 6060
T5 6m
Mill Finish
Sign Post
Bracket
177.8x19
E33479 6 246 443 Mill
Finish
808185 E34852 6060
T5 6.1m
Mill Finish
Sign 200mm
Sign Box
E34852 6.1 672 150 Mill
Finish
808576 E53084 6060
T5 6.1m
Mill Finish
Sign Frame
Strengthener
E53084 6.1 264 105 Mill
Finish
808680 E53086 6060
T5 6.1m
Mill Finish
Sign 200mm
Surround
E53086 6.1 162 100 Mill
Finish
810383 E53091 6060
T5 6.1m
Mill Finish
Sign 140mm
Sign Box
E53091 6.1 591 142 Mill
Finish
838741 E53092 6060
T5 6.1m
Mill Finish
Sign 150mm
Surround
E53092 6.1 109 100 Mill
Finish
807883 E73601 6060
T5 6.0m
Mill Finish
H/Duty
Unistrut
42x40
E73601 6 201 201 Mill
Finish
809128 EK8891 6060
T5 6.0m
Mill Finish
Roadsign
C-Channel
28.50x25.5
EK8891 6 186 100 Mill
Finish
Signs
Capral Limited March 2011
111
Sheets
Plates and
Panels
113
Material No Material Description Market Description Sap Colour Code
315628 Alupanel Lite G/M White
2440x1220x3/0.21
Alupanel Lite Gloss/Matt White
2440x1220x3/0.21
Alupanel
Material
No
Die No A
mm
B
mm
T
mm
R1
mm
L m AP PP Finish Alloy/
Temp
Nom/
Mass
909282 EAL12321 54 51 1.5 6.5 308 107 Mill Finish 6060 T5 4.024
841161 EG6460 101.6 76.2 RAD 6 482 482 Mill Finish 6061 T6 23.748
969144 EG6460 101.6 76.2 RAD 7.6 482 482 Mill Finish 6082 T6 30.081
881123 E05679 152.4 101.6 8 686 686 Mill Finish 6082 T6 64.8
I Beams - Geometric
Diagram Material No Material Market Die No Length Ap Pp Finish
937481 Eal20188
6005a T5 7.5m
Mill Finish
Curtain
Track
Eal20188 7.5 435 435 Mill
Finish
937483 Eal20188
6005a T5 9m
Mill Finish
Curtain
Track
Eal20188 9 435 435 Mill
Finish
Industrial Sys-Small
Sheets Plates and Panels
Capral Limited March 2011
115
Sheets Plates and Panels continued
Sheet/Plate (except Gr.5083)
Material No Material Description Market Description Sap Colour
Code
100037 0.60 1200 2400 MF 5005 H34 Mill Finish NON
100341 0.80 1200 2400 MF 5005 H34 Mill Finish NON
102492 1.00 1200 2400 5005 H34 (11p) Anodised Clear 10um 1 Side PVC 11P
100755 1.00 1200 2400 MF 5005 H34 Mill Finish NON
100058 1.00 1200 2400 MF 5005 H34 (Mpc) Mill Finish PVC Coated MPC
100059 1.20 1200 2400 MF 5005 H34 Mill Finish NON
100060 1.20 1200 2400 MF 5005 H34 (Mpc) Mill Finish PVC Coated MPC
103431 1.60 1200 2400 14a 5005 H34 25uM Clear Anodise / 1 Side 14A
100083 1.60 1200 2400 MF 5005 H34 Mill Finish NON
100085 1.60 1200 2400 MF 5005 H34 (Mpc) Mill Finish PVC Coated MPC
100084 1.60 1200 2400 MF 5251 H34/5052 H32 Mill Finish NON
100818 1.60 1200 3600 MF 5005 H34 Mill Finish NON
104961 1.60 1200 3600 MF 5005 H34 (11p) 10 Um Clear + PVC 1 Side 5005 H34 11P
100115 2.00 1200 2400 MF 5005 H34 Mill Finish NON
100117 2.00 1200 2400 MF 5005 H34 (Mpc) Mill Finish PVC Coated MPC
100116 2.00 1200 2400 MF 5251 H34/5052 H32 Mill Finish NON
100293 2.00 1200 3000 MF 5005 H34 Mill Finish NON
100831 2.00 1500 3600 MF 5005 H34 Mill Finish NON
100121 2.50 1200 2400 MF 5005 H34 Mill Finish NON
100122 2.50 1200 2400 MF 5005 H34 (Mpc) Mill Finish PVC Coated MPC
100836 2.50 1200 2400 MF 5251 H34/5052 H32 Mill Finish NON
100125 2.50 1500 3000 MF 5251 H34/5052 H32 Mill Finish NON
100129 3.00 1200 2400 MF 5005 H34 Mill Finish NON
100131 3.00 1200 2400 MF 5005 H34 (Mpc) Mill Finish PVC Coated MPC
100130 3.00 1200 2400 MF 5251 H34/5052 H32 Mill Finish NON
100853 3.00 1200 3000 MF 5005 H34 Mill Finish NON
100854 3.00 1200 3600 MF 5005 H34 Mill Finish NON
100134 3.00 1200 6000 MF 5251 H34/5052 H32 Mill Finish NON
102631 3.00 1500 3000 MF 5005 H34 Mill Finish NON
100288 3.00 1500 3600 MF 5005 H34 Mill Finish NON
100346 4.00 1200 2400 MF 5005 H34 Mill Finish NON
100159 5.00 1200 2400 MF 5005 H34 Mill Finish NON
100176 6.00 1200 2400 MF 5005 H34 Mill Finish NON
Sheet/Plate 5083/5383 (3-8mm)
Material No Material Description Market Description Sap Colour
Code
100128 3.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certied NON
100146 4.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certied NON
100158 5.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certied NON
100175 6.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certied NON
100188 8.00 1200 1200 MF 5083 H116 DNV Mill Finish DNV Certied
100189 8.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certied NON
Sheet/Plate 5083/5383 (>=10mm)
Material No Material Description Market Description Sap Colour
Code
100198 10.0 1200 2400 MF 5083 H116/321 DNV Mill Finish DNV Certied NON
100946 100.0 1200 1200 MF 5083 H112 Mill Finish NON
100205 12.0 1200 2400 MF 5083 H116/321 DNV Mill Finish DNV Certied NON
104061 16.0 1200 2400 MF 5083 H112 Mill Finish NON
100223 20.0 1200 2400 MF 5083 H112 Mill Finish NON
100904 25.0 1200 2400 MF 5083 H112 Mill Finish NON
100909 32.0 1200 2400 MF 5083 H112 Mill Finish NON
101875 40.0 1200 2400 MF 5083 H112 Mill Finish NON
101094 50.0 1200 2400 MF 5083 H112 Plate 5083 H112 NON
100932 65.0 1200 1200 MF 5083 H112 Mill Finish NON
100942 80.0 1200 1200 MF 5083 H112 Mill Finish NON
Treadplate (All)
Material No Material Description Market Description Sap Colour
Code
100086 1.60 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
100096 1.60 1219 2438 TPL 3003 H22 (PP1) Bright Finish Propellor Pattern PP1
100828 2.00 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
100123 2.50 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
100132 3.00 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
100138 3.00 1219 2438 TPL 3003 H22 (PP1) Bright Finish Propellor Pattern PP1
100864 4.00 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
104187 4.76 1219 2438 TPL 3003 H22 (PP1) Bright Finish Propellor Pattern PP1
100160 5.00 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
100177 6.00 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
117
Advantages
of
Aluminium
119
A unique combination of properties makes aluminium and its alloys one of the
most versatile engineering and construction materials available today.
Lightweight
Aluminium is one of the lightest available commercial metals with a
density approximately one third that of steel or copper. Its high strength
to weight ratio makes it particularly important to transportation
industries allowing increased payloads and fuel savings. Catamaran
ferries, petroleum tankers and aircraft are good examples of aluminiums
use in transport. In other fabrications, aluminiums lightweight can
reduce the need for special handling or lifting equipment.
Excellent corrosion resistance
Aluminium has excellent resistance to corrosion due to the thin layer
of aluminium oxide that forms on the surface of aluminium when it is
exposed to air. In many applications, aluminium can be left in the mill
nished condition. Should additional protection or decorative nishes
be required, then aluminium can be either anodised or painted.
Strong
Although tensile strength of pure aluminium is not high, mechanical
properties can be markedly increased by the addition of alloying
elements and tempering. You can choose the alloy with the most
suitable characteristics for your application. Typical alloying elements
are silicon, manganese, copper and magnesium.
Strong at low temperatures
Where as steel becomes brittle at low temperatures, aluminium
increases in tensile strength and retains excellent toughness.
Easy to work
Aluminium can be easily fabricated into various forms such as foil,
sheets, geometric shapes, rod, tube and wire. It also displays excellent
machinability and plasticity ideal for bending, cutting, spinning, roll
forming, hammering, forging and drawing. Aluminium can be turned,
milled or bored readily, using the correct toolage. In fact, most
aluminium alloys can be machined speedily and easily. An important
factor contributing to the low cost of nished aluminium parts.
Aluminium is a popular choice of material for complex-sectioned
Advantages of Aluminium
121
hollow extrusions. Almost any method of joining is applicable - riveting,
welding, brazing or soldering. A wide variety of mechanical aluminum
fasteners simplies the assembly of many products. Adhesive bonding
of aluminium parts is successfully employed in many applications
including aircraft components, car bodies and some building
applications.
Good heat conductor
Aluminium is about three times as thermally-conductive as steel.
This characteristic is important in heat-exchange applications (whether
heating or cooling). Aluminium is used extensively in cooking utensils,
air conditioning, industrial heat exchangers and automotive parts.
High reectivity
Aluminium is an excellent reector of radiant energy through the
entire range of wave lengths. From ultra-violet through the visible
spectrum to infra-red and heat waves, as well as electromagnetic
waves such as radio and radar. Aluminium has a light reectivity of
over 80% which has led to its wide use in lighting xtures. These
reectivity characteristics also lead to its use as an insulating material.
For example, aluminium roong reects a high percentage of the
suns heat, promoting a cool interior atmosphere in summer, yet
insulating against heat loss in winter.
Good electrical conductor
Aluminium is one of the two common metals having electrical
conductivity high enough for use as an electrical conductor. The
conductivity of electrical-conductor grade (alloy 1350) is about 62%
that of the International Annealed Copper Standard. However,
aluminium is only a third the weight of copper, which means it
conducts about twice as much electricity as copper of the same weight.
Aluminium is widely utilised in power-transmission cables, transformers,
busbars and bases of electrical bulbs.
Easy surface treatment
For many applications, aluminium requires no protective or
decorative coating; the surface supplied is entirely adequate without
further nishing. Mechanical nishes such as polishing, embossing,
sand blasting, or wire brushing meet a variety of needs. Where the
Advantages of Aluminium continued
plain aluminium surface does not sufce, a wide variety of surface
nishes are available to suit. Chemical, electrochemical and paint
nishes are all used. Above all, anodising treatment can provide
excellent corrosion resistance and a wide range of colour variations.
Such nishes are widely used for both interior and exterior applications.
Non-magnetic
Aluminium has non-magnetic properties which make it useful for
electrical shielding such as busbar or magnetic compass housings.
Other applications include computer disks and parabolic antennas.
Non-toxic
The fact that aluminium is essentially non-toxic was discovered in the
early days of the industry. It is this characteristic which enables the
metal to be used in cooking utensils without any harmful effect on the
body. Aluminium with its smooth surface is easily cleaned, promoting
a hygienic environment for food processing. Aluminium foil wrapping
and containers are used extensively and safely in direct contact with
food products.
Others
Easy to recycle
Due to a low melting temperature, it is economically recyclable,
requiring only about 5% the energy required for smelting. It is an ideal
material in this age of energy and resource saving.
Sound absorbing
Used for ceilings
Shock absorbing
Due to its low modulus of elasticity, aluminium is used for automobile
bumpers and the like.
Non-Sparking
Aluminium is void of sparking properties against itself and other
non-ferrous metals.
123
Manufacturing and Value Add techniques
Focused on the requirements of our customers, a signicant investment has been
made in processing and fabrication facilities, including nine extrusion presses and
Australias largest extrusion press; 4400MT SMS Extrusion Press (yr2003), with
interchangeable 9/12 container.
Fabrication facilities include:
Automatic ne tolerance cut to length saw
4 AXIS CNC machining product centre up to h=170mm, w=400mm, l=14000mm
3 AXIS CNC machining product centre h=180mm, w=200mm, l=7000mm
CNC extrusion and plate router h=200mm, w=2500mm, l=12,500mm,
maximum cut depth = 30mm
Drawn products: Precision ovality, work hardened tubing, outer diameter
40mm to 130mm, wall thickness 1.8mm - 10mm
Knurling: Application of non-slip surface to extrusions
Product edge de-burring.
These fabrication capabilities allow us to supply material closer to a nal form,
providing the option of variable sizes and nishes previously unavailable and
creating a real opportunity for a one-stop-shop.
Finishing Capabilities
A range of nishing options ensures your extrusions can be easily matched to your
project. Powder coatings, supplied by Interpon Powder Coatings, are available in
an extensive range of colours, gloss levels, textures and metallic shades for
complete colour freedom. Interpons entire architectural range qualies for several
Green Star credits ensuring a sustainable nish for your project, with durability
for up to 7, 10 and 15 years on colour and lm integrity. For details and to view
the full colour range options, visit www.interpon.com.au
Anodising treatment can provide excellent corrosion resistance and a wide range
of colour options up to 25um. Such nishes are widely used for both interior
and exterior applications including the architects choice SatinEtch technology
which produces a matt nish with reduced die lines.
Production Process
Aluminium is a silver-white metal obtained from bauxite, a rock composed of
more than 50% aluminium hydroxides formed by weathering in tropical regions.
Aluminium is the earths third most abundant element (after oxygen and silicon)
and the most abundant metal in the earths crust (8% by mass).
Aluminium bearing compounds have been used by man from the earliest times.
Pottery was made from clays rich in hydrated silicate of aluminium and at one point
in history aluminium was so valuable that rulers and the wealthy preferred cutlery
made by aluminium instead of gold. Today more aluminium is produced each year
than all other nonferrous metals combined.The production of aluminium goes
via two different routes: primary aluminium production from ore and recycling
aluminium from process scrap and used aluminium products.
Advantages of Aluminium continued
Sheet
Ingot Casting Continuous Casting
Bauxite
Crusher
Decanter
Precipitator
Digester Filter
Press
Wire ingot
Extrusion
ingot
Cathode
Electrolytic cell
Holding furnace
Alloying
elements
Siphon
Anode
Alumina
Calciner
Molten electrolyte
Molten aluminium
Rod
Sheet Rod
Extrusions
Remelt /
Foundry ingot
Aluminium Extruder/Manufacturer
Potroom
Sheet ingot
Aluminium Mining and Production
125
Advantages of Aluminium continued
Aluminium - The Sustainable Metal
Aluminium boasts one of the highest recycling rates of any metal. At the end of
their long life, Capral extrusions can be readily recycled. Recycled aluminium
generally falls into two broad categories. New scrap resulting from a manufacturing
process such as extrusion is often not contaminated and of known quality. This
scrap is remelted and reprocessed with very little further treatment. Due to its high
value, such scrap enjoys an almost 100% recycle rate.
Old scrap, such as that from beverage cans, building and transport is gathered
and recycled via an efcient network of scrap metal merchants which sort and
separate it from other metals such as iron and steel. This scrap is most usually
remelted by secondary reners into silicon based alloys used predominantly for
aluminium castings.
In Europe, recycling rates of aluminium cans can reach up to 63% whilst rates
from buildings and transport are higher again and 85% & 95% respectively.
As recycling of aluminium requires only 5% of the initial energy consumed to
create it, recycling one tonne of aluminium saves 5 tonnes of bauxite and 15,000
kilowatt hours of electricity, making excellent environmental and nancial sense.
National Manufacturing Footprint
Caprals national manufacturing footprint means that our extrusions, where
practicable are produced close to where they are required. This helps minimise
the impact of sea and road freight, reducing carbon dioxide emissions.
Australian Supply Chain
As a local manufacturer, Capral is required to meet Australian environmental
regulations and standards in its manufacturing and nishing operations.
Understanding the full life cycle impact of products requires manufacturing
processes and materials to be traced back to their source.
Extensive Distribution Network
Caprals products are transported in bulk loads to regional distribution centres
that are within close proximity of our fabricators. The consolidation of fabricator
deliveries where practicable also helps minimise the impact of road freight, further
reducing carbon dioxide emissions.
Coatings and Finishes
Capral uses and recommends Interpon powder coatings which contain no organic
solvents or heavy metal pigments such as lead. With 7, 10, or 15 year global
warranty options for colour and lm integrity, Interpon nishes offer high
performance and reduced maintenance.
In addition to traditional anodised nishes Capral also offers a new Satin Etch
technology that provides an aesthetically pleasing nish whilst using less energy
and signicantly reducing waste by-products.
127
Conditions of Sale
Conditions
of Sale
1. General
(a) Any order for the purchase of goods placed by a purchaser (order) will
incorporate these Conditions of Sale (Conditions) and any conditions contained
in a purchasers order are excluded, unless expressly agreed to in writing by
Capral Limited (Company).
(b) The Company reserves the right to vary these Conditions at any time.
(c) In these Conditions, contract means a purchasers order when accepted by the
Company, these Conditions, any other part of this document and any other
terms and conditions agreed in writing by the Company and purchaser;
goods means the goods that the Company proposes to sell or has sold to a
purchaser, being (where relevant) the goods described on the other part of
this document, and a reference to goods includes services; GST means goods
and services tax; purchaser means the person buying goods from the Company;
and toolage means any dies, tools and other equipment which the Company
manufactures or obtains in order to produce the goods and includes all
intellectual property in or relating to the goods.
(d) The contract constitutes the entire agreement between the parties as to its
subject matter and may only be amended in writing signed by both parties.
(e) If there is any inconsistency between any of the terms of a contract, the order
of priority for the purpose of construction is:
(i) any other terms and conditions agreed in writing by the Company;
(ii) these Conditions;
(iii) any other part of this document;
(iv) the purchasers order.
2. Prices and Quotations
Unless the Company otherwise agrees in writing:
(a) Prices quoted are based on the Companys estimated cost of production,
manufacture or supply at the time of quotation and may be altered without
notice to the purchaser if there is any increase in the Companys costs between
the date of quotation and the date of order.
(b) All goods will be charged at the prices ruling at the date of order plus any
applicable GST which must be paid to the Company by the purchaser when
payment for the goods is due.
(c) Prices will be rounded to the nearest whole cent in the Companys invoices.
(d) In the case of orders for goods on the basis of the number of pieces, the
Company may apply a nominal weight (kg) to those goods to determine the
price of the goods. On request by the purchaser, the Company will disclose
such nominal weight. The weight shown on packaging is for shipping
purposes only and should not be taken as the weight of those goods.
(e) In the case of orders by the purchaser made on the basis of weight (kg), the
129
Conditions of Sale continued
Company may:
(i) calculate the number of pieces of the goods to be supplied by reference
to the nominal weight of the goods; and
(ii) calculate the price by reference to the nominal weight of the goods to
be supplied; and
(iii) supply and invoice the goods by reference to the nominal weight, rather
than the actual weight, of the goods.
3. Payment
(a) Payment must be made without deduction by the last working day of the
month after the month of invoice, unless otherwise noted on the other part
of this document or agreed in writing by the Company.
(b) The Company reserves the right to vary the terms of payment and to require
payment in full prior to delivery if, at any time, the credit worthiness of the
purchaser is, in the Companys opinion, unsatisfactory. If the purchaser has
not paid the Company in full by the due date, the Company may, at its option,
rescind the contract and resell or dispose of the goods without prejudice to
any claims for damages against the purchaser.
4. Delivery
(a) Unless otherwise agreed in writing by the Company, all costs of delivery will
be for the purchasers account.
(b) Any date for delivery of the goods or completion of the services shown on
the other part of this document or otherwise indicated by the Company
whether before or after or at the same time as the contract is made, is an
estimated date for delivery only. The Company will not be liable for any loss
or damage, however it arises, if the goods are not delivered or the services
are not completed by that date.
(c) Without limiting clause 4(b), the Company is not liable for any delay in delivery
for any reason including, without limitation:
(i) act of God, lightning, re, ood, explosion;
(ii) strike, lock-out or other labour difculty;
(iii) breakage, accident or other damage to or failure of machinery or
equipment;
(iv) unavailability or shortage of raw materials, labour, power supplies or
transport facilities; or
(v) failure or inability to obtain licences or the effect of any applicable laws,
orders, rules or regulations of any government or competent authority.
(d) If the Company determines that it is or maybe unable to deliver within a
reasonable time or at all the contract may be cancelled by the Company. If the
contract is cancelled, the purchaser will have no claim against the Company
for any damage, loss, cost or expense.
5. Instalments
The Company reserves the right to deliver the goods by instalments and each
instalment will be taken to be sold under a separate contract. Failure of the
Company to deliver any instalment will not entitle the purchaser to cancel the
balance of the order. If the purchaser defaults in payment for any instalment,
the Company may elect to treat the default as a breach of contract relating
to each other instalment.
6. Claims for wrongful delivery
Any claim by the purchaser for short or wrongful delivery of the goods must
be notied to the Company in writing within 14 days of delivery of the goods.
Any claim which the purchaser does not notify within that time (time being
of the essence) will be taken to have been absolutely waived.
7. Risk and Property
(a) Unless otherwise agreed in writing by the Company, the risk of loss of, or
damage to, the goods will pass to the purchaser on delivery to the purchaser.
If the purchaser collects the goods or arranges for their collection from the
Company then delivery will be deemed to occur on collection of the goods
from the Company.
(b) Property in, and ownership of, the goods will not pass from the Company to
the purchaser until payment in full of the purchase price of the goods and all
other amounts owing to the Company.
(c) Until property passes to the purchaser:
(i) the purchaser will hold the goods as duciary and bailee for the Company;
(ii) the goods must be stored separately and in a manner to enable them to
be identied and cross- referenced to particular invoices;
(iii) the Company, its employees or agents, are entitled to enter the
purchasers premises between 9.00am and 5.00pm on any business day
to inspect the goods;
(iv) unless otherwise notied in writing by the Company, the purchaser is
authorised to sell the goods in the ordinary course of the purchasers
business; and
(v) the proceeds of goods sold by the purchaser are to be held in trust for
the Company.
(d) If the purchaser fails to pay all or any part of the purchasers total indebtedness
to the Company under a contract, the Company may without notice and
without prejudice to any of its other rights and remedies recover and/or re-sell
the goods or any of them and may enter upon the purchasers premises for
that purpose.
131
Conditions of Sale continued
8. Description
Any description of the goods is given by way of identication only and the
use of that description does not constitute a sale by description.
9. Specications
(a) Unless otherwise stated on the other part of this document or agreed in
writing by the Company, the specication of the goods is in respect of
tolerances, weight, quantity, size, dimension, nishes, chemical composition
and physical properties as stated in the Companys most recent published
product data and/or in any recent applicable drawings issued by the Company,
or, if not so specied, subject to tolerances normally regarded as being
commercially acceptable.
(b) All illustrations, drawings and specications remain the property of the
Company and must be treated as condential by the purchaser (who may not
copy, sell, lend or otherwise dispose of or use them without the prior written
consent of the Company).
10. Toolage
(a) If the goods are manufactured from dies, tools or other equipment supplied
by the purchaser (purchaser equipment), the Company accepts no responsibility
for the shape, measure, capacity, tness or otherwise, of the purchaser
equipment or the suitability of the purchaser equipment for manufacturing the
goods and the Company is not liable for any loss or damage, however caused
(including negligence of the Company), to the purchaser equipment.
(b) All toolage remains the property of the Company and the Company is not
required to deliver such toolage to the purchaser or part with possession of it.
This applies even where the purchaser has contributed to the cost of development
and manufacture of the toolage.
(c) Where the Company has agreed that particular items of toolage will be used
exclusively for the manufacture of goods for the purchaser, the Company will
not use that toolage to manufacture goods for third parties or sell to third
parties products manufactured from that toolage, unless:
(i) the purchaser has authorised such use or sale; or
(ii) the purchaser has not, for a period of 36 consecutive months, purchased
from the Company any goods manufactured from that toolage; or
(iii) the purchaser is in default under a contract.
(d) Where sub-clauses 10(c)(ii) or (c)(iii) apply, the Company may without reference
to the purchaser dispose of such toolage or release such toolage for general use.
(e) Nothing in this clause 10 prevents the Company from supplying any third party
with shapes that are identical or similar to those produced from toolage
maintained for the purchaser.
11. Intellectual Property
(a) The purchaser warrants that anything furnished to the Company will not cause
the Company to infringe any intellectual property rights in the execution of the
purchasers order. The purchaser indemnies the Company against any claim,
loss, liability, cost and expense that may be incurred by the Company as a
result of any infringement or unauthorised use of intellectual property rights
arising out of the manufacture or use of the goods.
(b) The sale and purchase of the goods does not confer on the purchaser any
licence or rights under any intellectual property right which is the property of
the Company.
12. Implied terms
All conditions and warranties expressed or implied by statute, the common
law, equity, trade, custom or usage or otherwise are expressly excluded to
the maximum extent permitted by law.
13. Warranty
The Company will repair or replace (at the Companys option) all goods and
their components manufactured by it which the Company, in its discretion,
determines are defective in materials or workmanship under normal use and
service, as soon as reasonably practicable after the date of delivery. The liability
of the Company under this
Condition is limited to the repair or replacement of defective goods and
components. All other costs, including cartage and installation, must be paid
by the purchaser. While the goods are in the custody of the Company for
investigation or repair they will be at the risk of the purchaser and the Company
will not be liable for any damage to the goods. The Company will use its
reasonable endeavours to obtain for the purchaser the benet of any applicable
manufacturers warranty in respect of goods not manufactured by the Company.
14. Liability
To the maximum extent permitted by law, the liability of the Company,
howsoever arising under a contract, is limited, at the Companys option, to:
(a) the replacement or repair of the goods;
(b) the supply of equivalent goods; or
(c) the cost of replacing or repairing the goods or of acquiring equivalent goods.
The purchaser agrees to release, hold harmless and indemnify the Company
from and against any liability whatsoever and howsoever arising (including,
without limitation, from negligence or wilful misconduct on the part of the
Company or others) in connection with the sale of goods by the Company.
133
Conditions of Sale continued
15. Indirect loss
To the maximum extent permitted by law, the Company is not liable in any
way for any indirect or consequential loss including loss of prot, revenue,
reputation or opportunity, in contract, tort (including negligence) or otherwise
arising in connection with a contract.
16. No limitation on statutory rights
Nothing in clauses 12, 13, 14 or 15 purports to have or has the effect of
excluding, limiting or modifying any rights, entitlements or remedies that may
be conferred on a purchaser under the Trade Practices Act 1974 (Cth) or the
Sale of Goods Act 1923 (NSW) to the extent that those rights, entitlements
or remedies cannot be excluded or modied by agreement.
17. Cancellation
If the purchaser cancels any order or refuses to accept all or any of the goods
in an order other than in circumstances permitted in a contract, the purchaser
will be liable for any resulting damage or loss suffered by the Company. If the
goods have been or are in the process of being manufactured or produced
specically for the purchaser, the purchaser will pay to the Company as liquidated
damages the full contract price of the goods and any costs incurred by the
Company (including any GST) less the scrap value of the goods as determined
by the Company.
18. Interest
Without prejudice to any other rights or remedies of the Company, if any
payment is not made by the due date, the purchaser will pay on demand,
without limiting any other rights of the Company, interest at the rate of 2%
per year above the standard overdraft rate (for overdrafts under $100,000)
applied by the Companys primary bank at the time, on the outstanding amount,
calculated from the due date for payment until payment is made in full.
19. Waiver
Failure by the Company to insist on strict performance of any term, warranty
or condition of the contract will not be taken as a waiver of it or any rights the
Company may have and no waiver will be taken as a waiver of any subsequent
breach of any term, warranty or condition.
20. Subcontracting
The Company reserves the right to sub-contract the production, manufacture
or supply of the whole or any part of the goods or any materials or services
to be supplied.
21. Notice of Defects
The purchaser must notify the Company immediately of any defect in the goods
of which it becomes aware after delivery and will take all reasonable steps to
mitigate loss (if any) arising as a consequence of the defect. If the purchaser
transforms the goods and sells the transformed goods, the purchaser undertakes
to the Company that it will impose on the acquirer of the transformed goods
an obligation to notify immediately the purchaser and the Company of any
defect in the transformed goods of which it becomes aware after delivery and
to take all reasonable steps to mitigate loss (if any) arising as a consequence
of the defect. The Company will not be required to incur additional expense
in repairing goods caused by the transformation of goods or the integration
of goods with other goods.
22. Notices
Any notice to be given under a contract must be sent by facsimile or prepaid
mail to the other partys number or address (as notied by that party from
time to time).
23. Governing law and jurisdiction
Contracts are governed by and will be construed in accordance with the
laws of New South Wales and the purchaser submits to the non-exclusive
jurisdiction of the courts of that State.
24. International Supply Contract
The United Nations Convention on Contract for the International Sale of Goods
will not apply to any contract.
25. Condentiality
The purchaser must keep any contract condential.
135
Notes
137
Notes
139
Notes
141
Tel. 1300 361 877 Fax. 1300 133 974 www.capral.com.au
Capral Limited. Volume 1. March 2011

You might also like