Capacitance Change 20 of initial value Dissipation Factor 200 of initial specified value Leakage current initial specified value Shelf Life Reference Standard Item Characteristic I: Leakage Current (a) Max ripple current : mA (rms) (R.C.) : 85 120Hz o C For general purposes series with 7mm height.
Capacitance Change 20 of initial value Dissipation Factor 200 of initial specified value Leakage current initial specified value Shelf Life Reference Standard Item Characteristic I: Leakage Current (a) Max ripple current : mA (rms) (R.C.) : 85 120Hz o C For general purposes series with 7mm height.
Capacitance Change 20 of initial value Dissipation Factor 200 of initial specified value Leakage current initial specified value Shelf Life Reference Standard Item Characteristic I: Leakage Current (a) Max ripple current : mA (rms) (R.C.) : 85 120Hz o C For general purposes series with 7mm height.
Capacitance Tolerance Leakage Current Whichever is greater after 2 minutes Surge Voltage Dissipation Factor (tan ) Impedance ratio at 120Hz Low Temperature Stability o After 1000 hours application of WV at +85C, th e capacitor shall meet the following limits. Capacitance Change 20 of initial value Dissipation Factor 200 of initial specified value Leakage current initial specified value Shelf Life Reference Standard Item Characteristic I: Leakage Current ( A) C: Rated Capacitance( F) V : Working Voltage ( V ) Load Life JIS C 5102 I 0.01 CV or 3 ( A) 20 (M) MINIATURE SIZE SPECIFICATION CASE SIZE & MAX RIPPLE CURRENT Case size : DxL (mm) Max ripple current : mA (rms) (R.C.) : 85 120Hz o C SS Series W.V. 4 6.3 10 16 25 35 50 63 S.V. 5 8 13 20 32 44 63 79 W.V. 4 6.3 10 16 25 35 50 50~63 tan 0.35 0.24 0.20 0.16 0.14 0.12 0.10 0.10 4 6.3 10 16 25 35 50~63 6 4 3 2 2 2 2 12 8 6 4 4 3 3 Rated Voltage (V) o o -25 C/+25 C o o -40 C/+25 C 7mmL 85 , Standard o C For general purposes series with 7mm height . o At +85 C no voltage application after 1000 hours and then through the aging treatment ( reference JIS C 5102 4.4 ) , the capacitor shall meet the limits for load life characteristics .
All blank voltage on sleeve marking is the same voltage as " " point to. 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 4x7
(0G) (0J) (1A) (1C) (1E) (1V) (1H) (1J) o (120Hz 25 C) o (120Hz 25 C) o (25 C) o (25 C) o -40 +85 C 4 63VDC DIMENSIONS (mm) 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 D F d 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 8 3.5 0.50