Professional Documents
Culture Documents
October, 2008
IH-1000M
Tyco Fire Suppression & Building Products is ISO 9001 Certied with
products manufactured in our state-of-the-art ductile iron foundry and
manufacturing facilities. We are committed to maintaining our role in the
grooved piping industry through aggressive research and development.
The products that will improve our industry are being designed today. With
this level of investment and commitment, Tyco Fire Suppression & Building
Products is prepared to become the industry standard.
Tyco Fire Suppression & Building Products is a world leader in the
manufacture and distribution of piping products. Years of development,
engineering, pattern and tooling manufacturing, and the acquisition of the
necessary resources has provided the nest products available on the
market today. Grinnell Mechanical Products manufactured domestically
or world-wide are offered to scrutinizing quality standards as set forth by
independent testing laboratories.
Our Global Technology Center located in Cranston, RI, directs product
development from concept through design, testing and manufacturing,
then forwards all aspects of application engineering and quality assurance.
Owners, architects, consulting engineers, contractors, and tenants demand
the most dependable quality mechanical products for their piping systems
- the Global Technology Center ensures their demands are met each and
every time.
Throughout this handbook, nominal pipe sizes are referred to in ANSI
Inches and DN. ANSI Inches is a nominal pipe size designation derived
from the older IPS (inside pipe diameter) in inches. Sizes offered in ANSI
Inches directly correlate to nominal pipe sizes recognized in ANSI (American
National Standard Institute) pipe standards. DN refers to nominal pipe
sizes in diameter nominal and is a dimensionless designator for nominal
pipe sizes in metric. Certain DN sizes (e.g., DN65, DN125, and DN150) are
offered in multiple actual outside diameters. Consequently, when specifying
by DN pipe size, the O.D. (outside diameter) must be specied as well.
It is the Designers responsibility to select products suitable for the intended
service and to ensure that pressure ratings and performance data are not
exceeded. Always read and understand the installation instructions. Never
remove any piping component nor correct or modify any piping deciencies
without rst de-pressurizing and draining the system. Material and gasket
selection should be veried to be compatible for the specic application.
The products described herein must be installed and maintained in
compliance with this document, as well as with the applicable standards
of the Approval agency, in addition to the standards of any other authorities
having jurisdiction. Failure to do so may result in serious personal injury or
impair the performance of these devices.
The owner is responsible for maintaining their mechanical system and
devices in proper operating condition. The installing contractor or device
manufacturer should be contacted with any questions.
1. Read and understand all instructions before installing any Grinnell
Mechanical Products.
2. Be sure to wear appropriate safety equipment.
3. Verify that the system is de-pressurized and drained before starting any
installation, repair, or modication.
TABLE OF CONTENTS
CONTENTS
GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ISO 9001:2000 Certied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
General Code Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Government Agencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Housing / Fitting Material Specications . . . . . . . . . . . . . . . . . . . . . . . 9
Paint Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Coupling Nut / Bolt Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Gasket Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Groove Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Roll Grooving Machine Selection Chart. . . . . . . . . . . . . . . . . . . . . . . . 34
Roll Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Grooving Machine Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Figure 772, 770, 472 & 672 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . 40
Figure 705, 707 & 405 Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . . 42
Figure 772 & 707 Coupling (Large Diameter) . . . . . . . . . . . . . . . . . . . 44
Figure 716 Flexible Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 46
Figure 61 & 71 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Figure 71 Flange Adapter (Large Diameter) . . . . . . . . . . . . . . . . . . . . 50
Figure 730 Mechanical Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 909 Plain End Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
PRESSURE PERFORMANCE DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Steel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Copper Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Stainless Steel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
DIMENSIONAL DATA: DUCTILE IRON / STEEL . . . . . . . . . . . . . . . 66
Figure 772 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Figure 770 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Figure 705 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Figure 707 Heavy Duty Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . 76
Figure 716 Flexible Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 80
Figure 71 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Figure 730 Threaded Mechanical Tees & Crosses . . . . . . . . . . . . . . 88
Figure 730 Grooved Mechanical Tees & Crosses . . . . . . . . . . . . . . . 96
Grinnell Grooved Fittings - Pressure Loss . . . . . . . . . . . . . . . . . . . . 102
Figure 260 & 360 - End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Figure 210, 210LR - 90 Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Figure 310 - 90 Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Figure 314 - 45 Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Figure 201 & 301 - 45 Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Figure 212 & 312- 22 Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Figure 211 & 311 - 11 Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
TABLE OF CONTENTS
TABLE OF CONTENTS
GENERAL INFORMATION
GENERAL INFORMATION
Government Agencies
Coast Guard - Approved each vessel individually
Corps of Engineers (COE) - GEGS 15000
Federal Aviation Administration (FAA) HVAC, Plumbing and Fire Protection
Federal Housing Administration (FHA)
General Services Administration (GSA) - 15000 Series
Military Specications (MIL) - MILP - 10388 Fittings;
MIL - C - 10387 Couplings;
MIL - P - 11087A (CE) Steel Pipe,
Grooved MIL - I - 45208 Inspection Procedure
National Aeronautics and Space Administration (NASA)
Naval Facilities Engineering Command (NAVFAC)NFGS 15000 Series
National Institute of Health (NIH) - Dept. of Health - 15000 Series
Veterans Affairs (VA) - 15000 Series
GENERAL INFORMATION
Cast Products
ASTM A-536
Standard Specication for Ductile Iron Castings
Grade 65-45-12, Tensile Strength, minimum psi: 65,000
Yield Strength, minimum psi: 45,000
Elongated in 2" or 50 mm, minimum 12%
Paint Specications
s /RANGE
NON LEAD STANDARD
s &IRE "RIGADE 2ED
NON LEAD OPTIONAL
s (OT $IPPED 'ALVANIZED CONFORMING TO !34- !
s #OPPER 3YSTEM #OUPLINGS
Copper acrylic enamel
10
GENERAL INFORMATION
1 of 4
Bolts and Nuts: Coupling bolts and nuts are heat treated carbon steel,
oval-neck track head bolts and heavy hex nuts, conforming to ASTM
A-183 minimum tensile strength of 110,000 psi. Bolts and nuts are Zinc
electroplated. Metric bolts are gold color coded.
Nominal Pipe Size
ANSI
Inches
DN
1-1/4
DN32
1-1/2
DN40
2
DN50
2-1/2
DN65
DN65
3
DN80
4
DN100
DN125
5
DN125
DN150
6
DN150
8
DN200
10
DN250
12
DN300
14*
DN350
16*
DN400
18*
DN450
20*
DN500
24*
DN600
O.D.
Inches
(mm)
1.660
(42,2)
1.900
(48,3)
2.375
(60,3)
2.875
(73,0)
3.000
(76,1)
3.500
(88,9)
4.500
(114,3)
5.500
(139,7)
5.563
(141,3)
6.500
(165,1)
6.625
(168,3)
8.625
(219,1)
10.750
(273,1)
12.750
(323,4)
14.000
(355,6)
16.000
(406,4)
18.000
(457,2)
20.000
(508,0)
24.000
(609,6)
Figure 772
Inches / (mm)
Bolt
Socket
Size
Size
3 /8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
3 /8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
3 /8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
3 /8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
Figure 770
Inches / (mm)
Bolt
Socket
Size
Size
-
5/8 x 2-3/4
M16 x 70
5/8 x 3-1/2
M16 x 89
1-1/16
(24 mm)
1-1/16
(24 mm)
M10 x 57
16 mm
3 /8 x 2-1/4
(M10 x 57)
3 /8 x 2-1/4
(M10 x 57)
11/16
(16 mm)
11/16
(16 mm)
5/8 x 3-1/2
M16 x 89
3/4 x 4-1/4
M20 x 108
1-1/16
(24 mm)
1-1/4
(30 mm)
M16 x 83
24 mm
5/8 x 3-1/4
(M16 x 83)
1-1/16
(24 mm)
M16 x 83
24 mm
5 /8 x 3-1/4
(M16 x 83)
3 /4 x 4-3/4
(M20 x 121)
1 x 6-1/2
(M24 x 165
1 x 6-1/2
(M24 x 165)
1-1/16
(24 mm)
1-1/4
(30 mm)
1-5/8
(41 mm)
1-5/8
(41 mm)
7/8 x 5-1/2
M22 x 140
1 x 5-1/2
M24 x 140
1 x 6-1/2
M24 x165
1 x 6-1/2
M24 x165
1-7/16
(36 mm)
1-5 /8
(41 mm)
1-5 /8
(41 mm)
1-5 /8
(41 mm)
1 x 5-1/2
1-5/8
1 x 5-1/2
1-5/8
1 x 5-1/2
1-5/8
1-1/8 x 5-3/4
1-13/16
1-1/8 x 5-3/4
1-13/16
11
GENERAL INFORMATION
DN65
3
DN80
DN100
4
DN100
DN125
DN125
5
DN125
DN150
DN150
6
DN150
8
DN200
10
DN250
12
DN300
14*
DN350
16*
DN400
18*
DN450
20*
DN500
24*
DN600
O.D.
Inches
(mm)
1.315
(33,4)
1.660
(42,4)
1.900
(48,3)
2.375
(60,3)
2.875
(73,0)
3.000
(76,1)
3.500
(88,9)
4.250
(108,0)
4.500
(114,3)
5.250
(133,0)
5.500
(139,7)
5.563
(141,3)
6.250
(159,0)
6.500
(165,1)
6.625
(168,3)
8.625
(219,1)
10.750
(273,1)
12.750
(323,4)
14.000
(355,6)
16.000
(406,4)
18.000
(457,2)
20.000
(508,0)
24.000
(609,6)
Figure 705
2 of 4
Figure 707
Inches / (mm)
Bolt
Socket
Size
Size
Inches / (mm)
Bolt
Socket
Size
Size
1/2 x 3
7/8
(M12 x 76)
(18 mm)
3/8 x 2-1/4
M10 x 57
3/8 x 2-1/4
M10 x 57
3/8 x 2-1/4
M10 x 57
3/8 x 2-1/4
M10 x 57
11/16
(16 mm)
11/16
(16 mm)
11/16
(16 mm)
11/16
(16 mm)
1/2 x 3
(M12 x 76)
1/2 x 3
(M12 x 76)
1/2 x 3
(M12 x 76)
7/8
(18 mm)
7/8
(18 mm)
7/8
(18 mm)
M12 x 76
18 mm
M12 x 76
18 mm
1/2 x 3
M12 x 76
7 8
(18 mm)
1/2 x 3
(M12 x 76)
7 8
(18 mm)
M12 x 76
18 mm
1/2 x 3
M12 x 76
7 8
(18 mm)
5/8 x 3-1/4
(M16 x 83)
1-1/16
(24 mm)
M16 x 83
30 mm
M16 x 83
30 mm
5/8 x 3-1/4
M16 x 83
1-1/4
(30 mm)
3/4 x 4-3/4
(M20 x 121)
1-1/4
(30 mm)
M16 x 83
30 mm
M16 x 83
30 mm
M20 x 121
30 mm
5/8 x 3-1/4
M16 x 83
3/4 x 4-3/4
M20 x 121
1 x 6-1/2
M24 x 165
1 x 6-1/2
M24 x 165
1-1/4
(30 mm)
1-1/4
(30 mm)
1-5 /8
(41 mm)
1-5 /8
(41 mm)
3/4 x 4-3/4
(M20 x 121)
7/8 x 6-1/2
(M22 x 165)
1 x 6-1/2
(M24 x 165)
1 x 6-1/2
(M24 x 165)
1-1/4
(30 mm)
1-7/16
(36 mm)
1-5 /8
(41 mm)
1-5 /8
(41 mm)
1 x 5-1/2
1-5 /8
1 x 5-1/2
1-5 /8
1 x 5-1/2
1-5 /8
1-1/8 x 5-3/4
1-13/16
1-1/8 x 5-3/4
1-13/16
12
GENERAL INFORMATION
O.D.
Inches
(mm)
2
DN50
2-1/2
DN65
3
DN80
4
DN100
5
DN125
6
DN150
8
DN200
2.125
(54,0)
2.625
(66,7)
3.125
(79,4)
4.125
(104,8)
5.125
(130,7)
6.125
(155,6)
8.125
(206,4)
O.D.
Inches
(mm)
2
DN50
2-1/2
DN65
DN65
3
DN80
DN100
4
DN100
DN125
5
DN125
DN150
6
DN150
DN200
8
DN200
2.375
(60,3)
2.875
(73,0)
3.000
(76,1)
3.500
(88,9)
4.500
(114,3)
4.500
(114,3)
5.500
(139,7)
5.563
(141,3)
6.500
(165,1)
6.625
(168,3)
8.515
(216,3)
8.625
(219,1)
3 of 4
Figure 672
Figure 61 **
Inches / (mm)
Bolt
Socket
Size
Size
3/8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
3/8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
1/2 x 3
7/8
(M12 x 76)
(18 mm)
1/2 x 3
7/8
(M12 x 76)
(18 mm)
5/8 x 3-1/4
1-1/16
(M16 x 83)
(24 mm)
5/8 x 3-1/4
1-1/16
(M16 x 83)
(24 mm)
3/4 x 4-3/4
1-1/4
(M20 x 121)
(30 mm)
Inches / (mm)
Bolt
Socket
Size
Size
5 /8 x 3
1-1/16
(M16 x 76)
(24 mm)
5 /8 x 3
1-1/16
(M16 x 76)
(24 mm)
5 /8 x 3
1-1/16
(M16 x 76)
(24 mm)
5 /8 x 3
1-1/16
(M16 x 76)
(24 mm)
3 /4 x 3-1/2
1-1/4
(M20 x 89)
(30 mm)
3 /4 x 3-1/2
1-1/4
(M20 x 89)
(30 mm)
Figure 716
Figure 730
Inches / (mm)
Bolt
Socket
Size
Size
3/8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
3/8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
Inches / (mm)
Bolt
Socket
Size
Size
3 /8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
3 /8 x 2-1/4
11/16
(M10 x 57)
(16 mm)
M12 x 76
18 mm
M10 x 57
16 mm
1/2 x 3
(M12 x 76)
7/8
(18 mm)
1/2 x 3
(M12 x 76)
7/8
(18 mm)
M16 x 83
24 mm
M12 x 76
18 mm
5/8 x 3-1/4
(M16 x 83)
1-1/16
(24 mm)
1/2 x 3
(M12 x 76)
7/8
(18 mm)
M20 x 121
30 mm
M16 x 121
24 mm
3/4 x 4-3/4
(M20 x 121)
1-1/4
(30 mm)
5/8 x 4-3/4
(M16 x 121)
1-1/16
(24 mm)
M20 x 121
30 mm
M16 x 121
24 mm
3/4 x 4-3/4
(M20 x 121)
1-1/4
(30 mm)
5/8 x 4-3/4
(M16 x 121)
1-1/16
(24 mm)
M20 x 121
30 mm
7/8 x 6-1/2
(M22 x 165)
1-7/16
(36 mm)
3/4 x 4-3/4
(M20 x 121)
1-5 /8
(41 mm)
GENERAL INFORMATION
O.D.
Inches
(mm)
2
DN50
4
DN100
2.375
(60,3)
2.875
(73,0)
3.500
(88,9)
4.500
(114,3)
5
DN125
6
DN150
Figure 71**
Inches / (mm)
Flange
Socket
Bolt Size
Size
5 /8 x 3
1-1/16
(M16 x 76)
(24 mm)
5 /8 x 3
(M16 x 76)
1-1/16
(24 mm)
5 /8 x 3
(M16 x 76)
1-1/16
(24 mm)
5 /8 x 3
(M16 x 76)
1-1/16
(24 mm)
5.563
(141,3)
3 /4 x 3-1/2
(M20 x 89)
1-1/4
(30 mm)
3 /4 x 3-1/2
(M20 x 89)
1-1/4
(30 mm)
3 /4 x 3-1/2
(M20 x 89)
1-1/4
(30 mm)
7/8 x 4
(M22 x 102)
1-7/16
(36 mm)
7/8 x 4
(M22 x 102)
1-7/16
(36 mm)
14*
DN350
6.625
(168,3)
8.625
(219,1)
10.750
(273,1)
12.750
(323,4)
14.000
(355,6)
1" x 4-1/4"
1-5/8
16*
DN400
16.000
(406,4)
1" x 4-1/4"
1-5/8
18*
DN450
18.000
(457,2)
1-1/8" x 4-3/4"
1-13/16
20*
DN500
20.000
(508,0)
1-1/8" x 4-3/4"
1-13/16
24*
DN600
24.000
(609,6)
1-1/4" x 5-1/2"
2-1/2
DN65
3
DN80
8
DN200
10
DN250
12
DN300
** ANSI Class 125/150 Flange Bolts and Nuts are not supplied.
13
4 of 4
14
GENERAL INFORMATION
Gasket Specications
Grade
Temp.
Range
-30F (-34C)
to
+230F (+110C)
1 of 6
Compound &
Color Code
General Service
Application
EPDM
Green
EPDM
Green
E
Tri- Seal
-30F (-34C)
to
+230F (+110C)
-20F (-29C)
to
+180F (+82C)
Nitrile
Orange
Petroleum products,
vegetable oils, and air with
oils. Not Recommended for
Hot Water Systems. Not
Recommended for Hot Dry
Air Systems.
+20 F (-7C)
to
+300 F (+149C)
Fluoroelastomer
Blue
-30 F (-34C)
to
+350 F (+177C)
Silicone
Red Gasket
EN
Tri-Seal
Cold and Hot
Copper Potable Water up
to +180F (+82C)
Tube
Products
EPDM
Copper
EN
Cold and Hot
IPS Pipe Potable Water up
Products to +180F (+82C)
EPDM
Yellow / Green
GENERAL INFORMATION
Gasket Specications
Styles
15
2 of 6
16
GENERAL INFORMATION
Gasket Specications
3 of 6
Gasket Grade
E/T
Water, Chlorine
Water, Deionized
Water, Seawater
Water, Potable
EN
Chemical
Composition
Gasket
Grade
Chemical
Composition
Gasket
Grade
Calcium Sulde
Acetone
Carbitol
E/T
Acetylene
E/T
E/T
Alkalis
E/T
Aluminum Chloride
E/T
Carbon Monoxide
Aluminum Fluoride
E/T
Caustic Potash
Aluminum Hydroxide
Chrome Alum
Aluminum Nitrate
E/T
Citric Acid
E/T
Aluminum Salts
Copper Chloride
Copper Cyanide
E/T
Ammonia Liquid
Copper Sulphate
E/T
Ammonium Chloride
E/T
Cupric Fluoride
Amyl Acetate
Cupric Sulphate
E/T
Amyl Alcohol
Dioctyl Phthalate
17
GENERAL INFORMATION
Gasket Specications
4 of 6
Chemical
Composition
Gasket
Grade
Chemical
Composition
Gasket
Grade
Aniline
Ethane
Ethanolamine
Barium Carbonate
Ethyl Alcohol
Barium Chloride
E/T
Ethyl Chloride
Barium Hydroxide
E/T
Ethylene Chlorohydrin
Benzoic Acid
Ethylene Diamine
Benzyl Alcohol
Ethylene Glycol
E/T
Boric Acid
E/T
Fluboric Acid
E/T
Butyl Alcohol
E/T
Fly Ash
Butylene
Formaldehyde
E/T
Calcium Bisulphate
Formamide
E/T
Calcium Chloride
E/T
Formic Acid
E/T
Fructose
E/T
Calcium Sulfate
E/T
Furfuryl Alcohol
Glycerin
E/T
Propylene Glycol
Glycerol
E/T
Salicylic Acid
Glycol
E/T
Silver Nitrate
Heptane
E/T
Hexaldehyde
Sodium Bicarbonate
E/T
Hexane
Sodium Bisulphate
E/T
Hexylene Glycol
Sodium Bromide
E/T
Hydrouosilicic Acid
Sodium Chlorate
Isobutyl Alcohol
Sodium Chloride
E/T
18
GENERAL INFORMATION
Gasket Specications
5 of 6
Chemical
Composition
Gasket
Grade
Chemical
Composition
Gasket
Grade
Isopropyl Alcohol
Sodium Cyanide
E/T
Lead Acetate
Lithium Bromide
Magnesium Chloride
E/T
Sodium Metaphosphate
Magnesium Hydroxide
E/T
Sodium Nitrate
Magnesium Sulphate
E/T
Sodium Peroxide
Sodium Phosphate
Sodium Silicate
Mineral Oils
Sodium Sulde
E/T
E/T
Nitrous Oxide
Stearic Acid
Ozone
Sulphur
E/T
Phosphate Ester
Toluene 30%
Potassium Bromide
E/T
Triethanolamine
E/T
Potassium Carbonate
E/T
Trisodium Phosphate
11 Lb/50 gal. (5 Kg/189 L)
Potassium Chloride
Urea
Potassium Chromate
Vegetable Oil
Potassium Hydroxide
Vinyl Acetate
Nickel Chloride
Nickel Plating Solution
125 F (52 C) Max
Nitric Acid, to 10%,
75 F (24 C) Max
GENERAL INFORMATION
Gasket Specications
19
6 of 6