Professional Documents
Culture Documents
Valves
Technical
Information
To help you quickly find information in this manual, the material is divided into sections,
topics, subtopics, and details, with descriptive headings set in red type. Section titles
appear at the top of every page in large red type. Topic headings appear in the left
hand column in BOLD RED CAPITAL LETTERS. Subtopic headings appear in the body
text in bold red type and detail headings in italic red type.
References (example: See Topic xyz, page XX) to sections, headings, or other publications are
also formatted in reditalic type. In Portable Document Format (PDF) files, these references
represent clickable hyperlinks that jump to the corresponding document pages.
Tables, illustrations,
and complementary
information
Tables, illustrations, and graphics in this manual are identified by titles set in blue italic
type above each item. Complementary information such as notes, captions, and drawing
annotations are also set in blue type.
References (example: See Illustration abc, page YY) to tables, illustrations, and graphics
are also formatted in blue italic type. In PDF files, these references represent clickable
hyperlinks that jump to the corresponding document pages.
Special text
formatting
Defined terms and acronyms are set in bold black type in the text that defines or
introduces them. Thereafter, the terms and acronyms receive no special formatting.
Black italic type is used in the text to emphasize important information, or to set-off
words and terms used in an unconventional manner or alternative context. Red and blue
italics represent hyperlinked text in the PDF version of this document (see above).
Table of contents
An indented Table of Contents (TOC) appears on the next page. Tables and illustrations
in the TOC set in blue type. In the PDF version of this document, the TOC entries are
hyperlinked to the pages where they appear.
Flexibility of design......................................................................................................................................... 6
Circuit options.................................................................................................................................................. 6
Capability........................................................................................................................................................... 6
Actuation options........................................................................................................................................... 6
Modular valves................................................................................................................................................. 7
Monoblock valves........................................................................................................................................... 7
Features and ratings by model................................................................................................................... 8
Quick selection
matrix
Fluids..................................................................................................................................................................10
Base stock and additives.......................................................................................................................10
Viscosity......................................................................................................................................................10
Filtration......................................................................................................................................................10
Return line filtration................................................................................................................................10
Cleanliness.................................................................................................................................................10
Model 1612
Description......................................................................................................................................................11
Typical applications......................................................................................................................................11
Standard features..........................................................................................................................................11
Pressure drop..................................................................................................................................................12
Technical data.................................................................................................................................................12
Options.............................................................................................................................................................12
Relief valve.................................................................................................................................................13
Handles........................................................................................................................................................13
Dimensions......................................................................................................................................................14
Model 1617
Description......................................................................................................................................................15
Typical applications......................................................................................................................................15
Standard features..........................................................................................................................................15
Other features available..............................................................................................................................15
Pressure drop..................................................................................................................................................16
Technical data.................................................................................................................................................16
Options.............................................................................................................................................................16
Dimensions......................................................................................................................................................18
Model 1627
Description......................................................................................................................................................19
Typical applications......................................................................................................................................19
Standard features..........................................................................................................................................19
Other features available..............................................................................................................................19
Pressure drop..................................................................................................................................................20
Technical data.................................................................................................................................................20
Options.............................................................................................................................................................20
Dimensions......................................................................................................................................................22
Description......................................................................................................................................................23
Typical applications......................................................................................................................................23
Standard features..........................................................................................................................................23
Other features available..............................................................................................................................23
Pressure drop..................................................................................................................................................24
Technical data.................................................................................................................................................24
Options.............................................................................................................................................................24
Dimensions......................................................................................................................................................26
Model 1618
Description......................................................................................................................................................27
Typical applications......................................................................................................................................27
Standard features..........................................................................................................................................27
Pressure drop..................................................................................................................................................28
Technical data.................................................................................................................................................28
Options.............................................................................................................................................................28
Dimensions......................................................................................................................................................30
Specifications..................................................................................................................................................31
Typical performance....................................................................................................................................32
Inlet covers order code................................................................................................................................33
Inlet porting and relief valve options.....................................................................................................34
Mid-inlet flow dividers and combiners order code...........................................................................35
Mid-inlet flow dividers and combiners.................................................................................................36
Outlet covers order code............................................................................................................................37
Outlet porting and plug options.............................................................................................................38
Work section order code.............................................................................................................................39
Circuit types....................................................................................................................................................42
Spool types......................................................................................................................................................43
Actuation options.........................................................................................................................................44
Cabling and electrical options for actuator types G, H, and J........................................................47
Actuation mounting side...........................................................................................................................47
Spool centering and detent options......................................................................................................48
Auxiliary valves...............................................................................................................................................50
Dimensions CDS 100....................................................................................................................................51
Dimensions CDS 60......................................................................................................................................52
Model 1125
Typical applications......................................................................................................................................53
Standard features..........................................................................................................................................53
Pressure drop curves....................................................................................................................................54
Pressure rise curves(system relief valve SVPR)....................................................................................55
Pressure rise curves(work port relief valve SVLP)..............................................................................56
Porting...............................................................................................................................................................57
Handles SVM...................................................................................................................................................57
Technical data.................................................................................................................................................57
Options.............................................................................................................................................................57
Typical circuit..................................................................................................................................................58
Dimensions......................................................................................................................................................59
Exploded view................................................................................................................................................60
The Sauer-Danfoss directional control valves are designed to give customer flexibility
over a broad range of flow and pressure capabilities. Actuator options include a range
of levers, cable actuators, hydraulic and pneumatic pilot controls, two-axis joysticks,
and electrohydraulic solenoids. Flow rates range from 0 to 100 l/min [26 US gal/min].
Configurations include compact monoblock and flexible modular styles.
Circuit options
Parallel circuits
Series circuits
Tandem circuits
Priority circuits
Regenerative circuits
Power beyond
Open center
Closed center
Capability
Actuation options
Refer to the quick selection matrix on pages 12 and 13 for specific options by model.
CDS-100
100 [26]
CDS-60
60 [16]
1125
38 [10]
Number
Circuit
of Spools
Parallel
1 to 12
Tandem
Series
Parallel
1 to 12
Tandem
Series
1 to 8
Parallel
Page
Monoblock valves
Valve
model
1612
1617
1627
1637
1618
20 [5]
40 [11]
80 [21]
76 [20]
100 [26]
38 [10]
38 [10]
38 [10]
38 [10]
Number
Circuit
of Spools
1
1
2
3
1
Page
Tandem
Parallel
Parallel
Parallel
Parallel
Rating / feature
Modular
1617/27/37
1618
1612
1125
CDS60
CDS100
19 l/min [5 US gal/min]
38 l/min [10 US gal/min]
Nominal
flow
X
X
Nominal
pressure
Parallel
Series
Circuit options
Tandem
Priority
Power beyond
Closed center
Spools
Spool action
options
28.7
[1.13]
28.7
[1.13]
N/A
35
[1.38]
36
[1.42]
44.5
[1.75]
Maximum number
12
12
Spring center
1 position detent
2 position detent
3 position detent
Spring offset
3 pos. - 3 way
3 pos. - 4 way
Friction detent
Float detent
Regenerative feel
Spool options
4 pos. regenerative
Work port
neutral options
Pilot operated
Closed to tank
Open to tank
Meter to tank
Actuation
options
Rating / feature
Modular
1617/27/37
1618
1612
1125
CDS60
CDS100
Handle
Mechanical joystick
RHC
EHC on/off
Cable control
Hydraulic / pneumatic
<1 cm3/min
[0.061 in3/min]
1 to 3 cm3/min
[0.061 to 0.183 in3/min]
4 to 6 cm3/min
[0.244 to 0.366 in3/min]
Maximum work
port leakage
7 to 10 cm3/min
[0.427 to 0.610 in3/min]
11 to 13 cm3/min
[0.71 to 0.793 in3/min]
X
X
14 to 16 cm /min
[0.854 to 0.976 in3/min]
3
16 to 24 cm /min
[0.976 to 1.456 in3/min]
3
Load check
P.O. check
Flow control
Additional
features
Meter in
Meter out
Hydraulic kickout
Electric switch
X
X
Hydraulic fluid performs three basic functions in a hydraulic system: It transfers energy,
lubricates moving components, and transports heat and contaminants out of the system.
Base stock and additives
Sauer-danfoss valves are designed to operate with mineral-based fluids containing
oxidation, rust, and foam inhibitors, compatible with fluoroelastomer seals. Consult your
fluid supplier for information on seal compatibility.
Viscosity
Viscosity is the most important property of a hydraulic fluid. It is a measurement of how
the fluid resists flow. Low viscosity fluids increase internal leakage; high viscosity fluids
increase pressure drop through the valve. Use a fluid that meets the viscosity limits
published in this catalog. For specific requirements, see technical data in each section.
Temperature
Temperature affects a fluids viscosity. Higher temperature fluid has lower viscosity.
Operating at excessive temperatures may have other detrimental effects on your
hydraulic fluid. Design your hydraulic system to operate within the specified temperature
range. Specific requirements are published in each section.
For more information
For more information on hydraulic fluid selection refer to Hydraulic Fluids and Lubricants
Technical Information, Sauer-Danfoss publication 520L0463.
Filtration
Effective filtration is critical to a hydraulic systems performance and working life. Employ
system filtration capable of meeting the published requirements in each valve section.
Be aware that other components in the system may have more stringent requirements.
Design your filtration system to satisfy the requirements of the most sensitive
component.
Return line filtration
Return line filtration is generally adequate for Sauer-Danfoss valves. We recommend a
10 micron nominal (20 micron absolute) or finer filter. Insure the filter in your system is
properly sized and maintained. To facilitate proper filter maintenance, use a pressure
gauge or other indicator to signal when it is necessary to change the filter. Never
allow filter to reach its bypass condition. Follow the filter manufacturers maintenance
recommendations.
Cleanliness
Hydraulic system contamination must not exceed the limits published for each valve.
Limits are specified per ISO 4406 (1999). When measuring system contamination,
calibrate test equipment in accordance with the ACFTD method.
For more information
For more information on system filtration, refer to Design Guidelines for hydraulic fluid
cleanliness, Sauer-Danfoss publication 520L0467.
10
Description
Single spool monoblock valve. 76 l/min [20 US gal/min] maximum flow. 207bar
[3000psi] maximum pressure.
Typical applications
Standard features
11
Pressure drop
13.79
[200]
12
[175]
P-W
10.34
[150]
8.8
[125]
6.9
[100]
W-T
5
[75]
MODEL 32
P-T
MODEL 22
P-T
3.45
[50]
1.7
[25]
0
Technical data
Options
19
[5]
38
[10]
Flow - l/min [US gal/min]
76
[20]
Maximum pressure
Maximum tank line pressure
207 bar
69 bar
[3000 psi]
[1000 psi]
76 l/min
[20 US gal/min]
6.3 mm
12.6 mm
[0.25 in]
[0.50 in]
24 cm3/min
[1.46 in/min]
82 cm3/min
[82 cm3/min]
-29 C
82 C
-29 to 60 C
6 mm/sec (cSt)
440 mm/sec (cSt)
19/16
231 N
3.18 kg
[-20 F]
[180 F]
[-20 to 140 F]
[45 SUS]
[2000 SUS ]
MODEL 12
P-T
[53 lbf ]
[7 lbs]
Spool types
Code
Symbol
Description
P
4-way, 3-position
Open center
Work ports blocked to tank in neutral position
T
AB
P
P106 237
T
4-way, 3-position
Open center
B port blocked to tank
V
B
P
P106 238
T
F
AB
12
57
[15]
P106 239
4-way, 4-position
Open center
Work ports blocked to tank in neutral position,
open to tank in fourth position or float
Code
Symbol
Description
P
3-way, 3-position
Open center
Work port blocked to tank in neutral position
X
A
P
P106 240
T
4-way, 3-position
Motor open center
Work ports open to tank in neutral position
O
AB
P106 241
Spool action
Code
A
D
L
Description
Spring centered, detent in float
3-position detent
Spring centered, detent out
Code
N
S
Description
Spring centered, detent in
Spring centered
Relief valve
Pilot operated relief valve
0.4 bar per liter [20 psi per gallon] rise
No restrictions on setting up to 207 bar [3000 psi]
Adjustable standard
Porting
Inlet/outlet
Locations available
Work ports
Handles
C-hook kit
Standard handle with C-hook kit
Pivot-block handle kit
13
2 WORK PORTS
3/4-16 S.A.E.
OUTLET PORT
7/8-14 S.A.E.
B
6.4
[0.25]
74.7
[2.94]
52.3
[2.06]
20.6
[.81]
8.6
[0.34]
22.4 [0.88]
.352/.342
2 MTG. HOLES
45.7
[1.80]
22.4 [0.88]
7.9
[0.31]
6.50 [0.256]
6.43 [0.253] THRU
5.1
[0.20]
66.0 [2.60]
97.8 [3.85]
123.9 [4.88]
44,2 [1.74]
41.1 [1.62]
166.6 [6.56]
122.7 [4.83]
51.6 [2.03]
50.8
[2.00]
39.6
[1.56]
6.50 [0.256]
6.43 [0.253] THRU
mm [in]
14
Description
Single spool directional control valve with parallel circuitry. 38 l/min [10 US gal/min]
maximum flow. 207 bar [3000 psi] maximum pressure.
Typical applications
Lawn and garden tractors, mowers, small tractor loader attachments, sweepers, utility
trucks, trenchers, agricultural equipment
Standard features
Other features
available
15
18.32
[240]
P-W
12.24
[180]
8.16
[120 ]
W-T
4.08
[60]
P-T
0
38
19
[10]
[5]
Flow - l/min [US gal/min]
Technical data
Options
Maximum pressure
Maximum tank line pressure
Maximum oil flow
Spool travel in and out from neutral
Spool travel to float position from neutral
Maximum port leakage at 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Maximum lift check leakage at 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Minimum oil temperature
Maximum oil temperature
Ambient temperature range
Minimum viscosity
Maximum viscosity
Fluid cleanliness per ISO 4406
Typical spool effort: dry, full stroke
Weight
207 bar
69 bar
38 l/min
4.8 mm
9.65 mm
[3000 psi]
[1000 psi]
[10 US gal/min]
[0.19 in]
[0.38 in]
16 cm3/min
[1 in/min]
82 cm3/min
[5 in/min]
-29 C
82 C
-29 to 60 C
6 mm/sec (cSt)
440 mm/sec (cSt)
19/16
231 N
2.26 kg
[-20 F ]
[180 F]
[-20 to 140 F]
[45 SUS]
[2000 SUS]
[52 lbf ]
[5 lbs]
Spool types
Code
Symbol
Description
A, C or E
B, D or F
C
T P106 242
P
A, C or E
B, D or F
F
T P106 243
P
A, C or E
4-way, 3-position
Closed center
Work ports blocked to tank in neutral position
4-way, 4-position
Open center
Work ports blocked to tank in neutral position
Open to tank in fourth position or float
B, D or F
O
T P106 244
P
16
57
[15]
4-way, 3-position
Motor open center
Work ports open to tank in neutral position
Code
Symbol
Description
A, C or E
B, D or F
4-way, 3-position
Open center
Work ports blocked to tank in neutral position
T
T P106 245
P
B, D or F
3-way, 3-position
Open center
Work ports blocked to tank in neutral position
(B, D, or F)
3-way, 3-position
Open center
Work ports blocked to tank in neutral position
(A, C, or E)
V
T
P106 246
A, C or E
X
T P106 247
Spool action
Code
A
D
L
Description
Spring centered, detent in float
3-position detent
Spring centered, detent out
Code
N
S
Description
Spring centered, detent in
Spring centered
Relief valve
Code
2
Description
Direct-acting ball and spring
1 bar/l [50 psi/gal] rise
Standard setting 83 bar [1200 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Not for use on setting over 30 l/min [8 US gal/min]
Full flow setting at 138 bar [2000 psi]
Pilot operated relief valve
0.4 bar/l [20 psi/gal] rise
No restrictions on setting up to 210 bar [3000 psi]
Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet
Locations available
Work ports
3/4-16, SAE 8
inlet-side, top, end
outlet-top, end
9/16-18 , SAE-6
Handles
Code
C
H
P
N
Description
C-hook kit
Standard handle with C-hook kit
Pivot-block handle kit
No handles
17
117.3
[4.62]
90.4
[3.56]
85.9
[3.38]
72.4
[2.85]
DIRECT ACTING OR
PILOT OPERATED
RELIEF VALVE OPTIONS
AVAILABLE
4.8
[0.19]
IN
19.6
[0.77]
14.7
[0.58]
33.3
[1.31]
FLOAT 9.7
[0.38]
130.0
[5.12]
106.7
[4.20]
76.2
57.2 65.0 [3.00]
[2.56]
57.2
[2.25]
31.8
[2.25]
[1.25]
OUT
8.6
[0.34]
22.4
[0.88]
9.7
[0.38]
TOP OUTLET PORT 3/4-16 S.A.E.
157.2
[6.19]
39.6
[1.56]
0.5
[0.02]
3.18 R
[0.125]
CLEVIS
HANDLE
23.9
[0.94]
19.1
[0.75]
19.1
[0.75]
35.1
[1.38]
50.8
[2.00]
60.2
[2.37]
STANDARD
HANDLE
OPTION
"H" CODE
6.50 THRU,TYP.
6.43
[0.256]
[0.253]
156.0
[6.14]
168.7
[6.64]
PIVOT BLOCK
HANDLE
OPTION
("P" CODE)
6.4
[0.25]
31.8
[1.25]
100.3
[3.95]
19.8
[0.78]
IN 4.8
[0.19]
NEUTRALl
49.3
[1.94]
OUT
6.53
5.40
[0.257]
[0.252]
22.35
[0.88]
65.0
[2.56]
.03 X 45 CMFR
6.50
6.43 DIA., THRU
[0.256]
[0.253]
15.0
[0.59 D]
192.0
[7.56]
194.1
[7.64]
8.74
[0.344]
mm [in]
18
Description
Two-spool directional control valve with parallel circuitry. 38 l/min [10 US gal/min]
maximum flow. 207 bar [3000 psi] maximum pressure.
Typical applications
Lawn and garden tractors, mowers, small tractor loader attachments, sweepers, utility
trucks, trenchers, agricultural equipment
Standard features
Other features
available
19
Pressure drop
P-W
12.24
[180]
P-T
8.16
[120]
W-T
4.08
[60]
38
[10]
19
[5]
57
[15]
Technical data
Maximum pressure
Maximum tank line pressure
Maximum oil flow
Spool travel in and out from neutral
Spool travel to float position from neutral
Maximum port leakage at 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Maximum lift check leakage at 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Minimum oil temperature
Maximum oil temperature
Ambient temperature range
Minimum viscosity
Maximum viscosity
Fluid cleanliness per ISO 4406
Typical spool effort: dry, full stroke
Weight
207 bar
69 bar
38 l/min
4.8 mm
9.65 mm
[3000 psi]
[1000 psi]
[10 US gal/min]
[0.19 in]
[0.38 in]
16 cm3/min
[1 in/min]
82 cm3/min
[5 in/min]
-29 C
82 C
-29 to 60 C
6 mm/sec (cSt)
440 mm/sec (cSt)
19/16
231 N
3.62 kg
[-20 F ]
[180 F]
[-20 to 140 F]
[45 SUS]
[2000 SUS]
[52 lbf ]
[8 lbs]
Spool types
Options
Code
Symbol
Description
A, C or E
B, D or F
C
T P106 242
P
A, C or E
B, D or F
F
T P106 243
P
A, C or E
4-way, 4-position
Open center
Work ports blocked to tank in neutral position
Open to tank in fourth position or float
B, D or F
O
T P106 244
P
20
4-way, 3-position
Closed center
Work ports blocked to tank in neutral position
4-way, 3-position
Motor open center
Work ports open to tank in neutral position
Code
Symbol
Description
A, C or E
B, D or F
4-way, 3-position
Open center
Work ports blocked to tank in neutral position
T
T P106 245
P
B, D or F
3-way, 3-position
Open center
Work ports blocked to tank in neutral position
(B, D, or F)
3-way, 3-position
Open center
Work ports blocked to tank in neutral position
(A, C, or E)
V
T
P106 246
A, C or E
X
T P106 247
Spool action
Code
A
D
L
Description
Spring centered, detent in float
3-position detent
Spring centered, detent out
Code
N
S
Description
Spring centered, detent in
Spring centered
Relief valve
Code
2
Description
Direct-acting ball and spring
1 bar/l [50 psi/gal] rise
Standard setting 83 bar [1200 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Not for use on setting over 30 l/min [8 US gal/min]
Full flow setting at 138 bar [2000 psi]
Pilot operated relief valve
0.4 bar/l [20 psi/gal] rise
No restrictions on setting up to 210 bar [3000 psi]
Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet
Locations available
Work ports
3/4-16, SAE 8
inlet-side, top, end
outlet-top, end
9/16-18 , SAE-6
Handles
Code
C
F
H
P
N
Description
C-hook kit
Joystick (option)
Standard handle with C-hook kit
Pivot-block handle kit
No handles
21
9.7
[0.38]
34.3
[1.35]
OPTIONAL DIRECT
ACTING RELIEF
19.8
[0.78]
4 WORK PORTS
9/16-18 S.A.E.
NEUTRAL
FLOAT
IN
33.3
[1.31]
9.6
[0.38]
19.6
15.0 [0.77]
[0.59]
130.0
[5.12]
106.4
[4.19]
104.9
85.9 93.7 [4.13] 85.9
[3.69]
[3.38]
60.5 [3.38]
31.8 [2.38]
[1.25]
6.4
[0.25]
9.6
[0.38]
39.9
[1.57]
0.5
[0.02]
28.4
[1.12]
156.2
[6.15]
OUT
8.6
[0.34]
22.4
[0.88]
OUT 4.8
[0.19]
4.8
[0.19]
IN
DIRECT ACTING OR
PILOT OPERATING
RELIEF VALVE
OPTIONS AVAILABLE
90.4
[3.56]
85.9
[3.38]
72.4
[2.85]
49.2
[1.94]
117.3
[4.62]
169.2
[6.66]
157.2
[6.19]
35.1
[1.38]
50.8
[2.00]
60.2
[2.37]
STANDARD
HANDLE
OPTIONAL
("H" CODE)
23.4
[0.92]
19.1
[0.75]
6.4
[0.25]
34.3
[1.35]
11.2
[0.44]
43.9
[1.73]
36.1
[1.42]
5.08
5.31 THRU
[0.200]
[0.209]
TANG TYPE SPOOL OPTION
22
mm [in]
19.1
[0.75]
Description
Three spool directional control valve with parallel circuitry. 38 l/min [10 US gal/min]
maximum flow. 207 bar [3000 psi] maximum pressure.
Typical applications
Lawn and garden tractors, mowers, small tractor loader attachments, sweepers, utility
trucks, trenchers, agricultural equipment
Standard features
Other features
available
23
Pressure drop
P-WP
3.5
[50]
Technical data
Options
P-T
WP-T
10
[5]
Flow rate - l/min [US gal/min]
Maximum pressure
Maximum tank line pressure
Maximum oil flow
Spool travel in and out from neutral
Spool travel to float position from neutral
Maximum port leakage at 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Maximum lift check leakage at 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Minimum oil temperature
Maximum oil temperature
Ambient temperature range
Minimum viscosity
Maximum viscosity
Fluid cleanliness per ISO 4406
Typical spool effort: dry, full stroke
Weight
28
[10]
207 bar
69 bar
38 l/min
4.8 mm
9.65 mm
[3000 psi]
[1000 psi]
[10 US gal/min]
[0.19 in]
[0.38 in]
16 cm3/min
[1 in/min]
82 cm3/min
[5 in/min]
-29 C
82 C
-29 to 60 C
6 mm/sec (cSt)
440 mm/sec (cSt)
19/16
231 N
5.44 kg
[-20 F ]
[180 F]
[-20 to 140 F]
[45 SUS]
[2000 SUS]
[52 lbf ]
[12 lbs]
Spool types
Code
Symbol
Description
A, C or E
B, D or F
C
T P106 242
P
A, C or E
4-way, 3-position
Closed center
Work ports blocked to tank in neutral position
B, D or F
O
T P106 244
4-way, 3-position
Motor open center
Work ports open to tank in neutral position
P
A, C or E
B, D or F
T
T P106 245
P
24
4-way, 3-position
Open center
Work ports blocked to tank in neutral position
Code
Symbol
Description
B, D or F
3-way, 3-position
Open center
Work ports blocked to tank in neutral position
(B, D, or F)
3-way, 3-position
Open center
Work ports blocked to tank in neutral position
(A, C, or E)
V
T
P106 246
A, C or E
X
T P106 247
Spool action
Code
A
D
L
Description
Spring centered, detent in float
3-position detent
Spring centered, detent out
Code
N
S
Description
Spring centered, detent in
Spring centered
Relief valve
Code
2
Description
Direct-acting ball and spring
1 bar/l [50 psi/gal] rise
Standard setting 83 bar [1200 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Not for use on setting over 30 l/min [8 US gal/min]
Full flow setting at 138 bar [2000 psi]
Pilot operated relief valve
0.4 bar/l [20 psi/gal] rise
No restrictions on setting up to 210 bar [3000 psi]
Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet
Locations available
Work ports
3/4-16, SAE 8
inlet-side, top, end
outlet-top, end
9/16-18 , SAE-6
Handles
Code
C
H
P
N
Description
C-hook kit
Standard handle with C-hook kit
Pivot-block handle kit
No handles
25
DIRECT ACTING OR
PILOT OPERATED RELIEF
VALVE OPTIONS AVAILABLE
9.9
[0.39]
117.3
[4.62]
85.9
[3.38]
72.1
49.3 [2.84]
[1.94]
20.1
[0.79]
4.8
OUT
[0.19]
NEUTRAL
22.4
[0.88]
33.3
[1.31]
FLOAT 9.7
[0.38]
130.0
[5.12]
106.7
[4.20]
14.7
[0.58]
19.1
[0.75]
35.1
[1.38]
50.8
[2.00]
60.2
[2.37]
31.8
[1.25]
157.2
[6.19]
STANDARD
HANDLE
OPTION
("H" CODE)
6.50 THRU,TYP.
6.43
[0.256]
[0.253]
23.4
[0.92]
3.18 R
[0.125]
6.53
6.40
CLEVIS
HANDLE [0.257]
[0.252]
19.1
[0.75]
PIVOT BLOCK
HANDLE
OPTION
("P") CODE
6.4
[0.25]
9.7 31.8
[0.38] [1.25]
0.5
[0.02]
156.0
[6.14]
60.5
[2.38]
39.6
[1.56]
137.7
[5.42]
88.9
[3.50]
19.6
[0.77]
IN 4.8
[0.19]
133.4
[5.25]
122.2
[4.81] 114.3
[4.50]
114.3
[4.50]
OUT
8.6
[0.34]
IN
OPTIONAL PILOT
OPERATED RELIEF
22.35
[0.88]
100.3
[3.95]
65.5
[2.58]
.03 x 45 CMFR.
6.50
6.43 DIA., THRU
[0.256]
[0.253]
15.0
[0.59 D]
192.0
[7.56]
194.3
[7.65]
8.74
[0.344]
mm [in]
26
Description
Single spool monoblock valve. 38 l/min [10 US gal/min] maximum flow. 207 bar [3000
psi] maximum pressure.
Typical applications
Mowers, sweepers, fork lifts, aerial lift equipment, utility trucks, snow blades, trenchers,
agricultural equipment
Standard features
27
Pressure drop
12.2
[180]
10.9
[160]
9.5
[140]
8.2
[120]
6.8
[100]
5.4
[80]
4.1
[60]
1618 P-T
2.7
[40]
1.4
[20]
0
3.8
[1]
7.6
[2]
11.4 15.1 18.9 22.7 26.5 30.3 34.1 37.8 41.6 45.4 49.2 53.0 56.8
[3]
[4]
[5]
[6]
[7]
[8]
[9] [10] [11] [12] [13] [14] [15]
Technical data
Options
Maximum pressure
Maximum tank line pressure
Maximum oil flow
Spool travel in and out from neutral
Maximum standby leakage @ 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Standard pilot check leakage@ 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Minimum oil temperature
Maximum oil temperature
Ambient temperature range
Minimum viscosity
Maximum viscosity
Fluid cleanliness per ISO 4406
Typical spool effort: dry, full stroke
Weight
[3000 psi]
[1000 psi]
[10 US gal/min]
[0.19 in]
300 cm3/min
[18 in/min]
0.5 cm3/min
[0.03 in/min]
-29 C
82 C
-29 to 60 C
6 mm/sec (cSt)
440 mm/sec (cSt)
19/16
231 N
2.72 kg
[-20 F ]
[180 F]
[-20 to 140 F]
[45 SUS]
[2000 SUS]
[52 lbf ]
[6 lbs]
Spool types
Code
Symbol
Description
A, C or E
B, D or F
O
T P106 244
P
28
207 bar
69 bar
38 l/min
4.8 mm
4-way, 3-position
Motor open center
Work ports open to tank in neutral position
Spool action
Code
A
D
L
Description
Spring centered, detent in float
3-position detent
Spring centered, detent out
Code
N
S
Description
Spring centered, detent in
Spring centered
Relief valve
Code
3
Description
Pilot operated relief valve
0.4 bar/l [20 psi/gal] rise
No restrictions on setting up to 210 bar [3000 psi]
Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet
Locations available
Work ports
Handles
Code
N
Description
No handles
29
IN
5.6 [0.22]
85.9
[3.38]
6.35
[0.25]
WORK PORT
9/16-18 S.A.E.
DFP
22.1
[0.87]
PB
127.5
5.02
9.7
[0.38]
127.5
[5.02]
31.8
[1.25]
77.7
[3.06]
65.0
[2.56]
OUT
6.35
[1.56]
127.0
[5.00]
79.3
[3.12]
35.1
[1.38]
A
6.5 [0.256]
6.4 [0.253]
POWER BEYOND
9/16-18 S.A.E.
Shown for dimensional reference only
mm [in]
30
CDS 100
CDS 60
Specifications
31
Typical performance
200
[2900]
150
[2176]
100
[1450]
50
[725]
0
10
[2.6]
20
[5.3]
30
40
50
60
70
[7.9] [10]
[13]
[16]
[19]
Flow - l/min [US gal/min]
80
[21]
90
[24]
100
[26]
16
[232]
16
[232]
12 sections
11 sections
11 sections
14
[203]
10 sections
14
[203]
10 sections
9 sections
9 sections
12
[174]
8 sections
12
[174]
8 sections
7 sections
6 sections
5 sections
8
[116]
4 sections
6
[87]
3 sections
2 sections
4
[58]
1 sections
5 sections
8
[116]
4 sections
6
[87]
3 sections
4
[58]
2 sections
10 20 30 40 50 60
[2.6] [5.3] [7.9] [10] [13] [16]
32
6 sections
10
[145]
1 sections
2
[29]
2
[29]
7 sections
10
[145]
10 20 30 40 50 60 70 80 90 100
[2.6] [5.3] [7.9] [10] [13] [16] [19] [21] [24] [26]
Flow - l/min [US gal/min]
E60 A C2 140/40*
Description
E100
P100
CDS100
CDS100 with priority flow control (contact Sauer-Danfoss)
E60
P60
CDS60
CDS60 with priority flow control (contact Sauer-Danfoss)
Port locations
Code
Description
A
B
C
D
Top port
Side port, top port plugged
Top port, with side gauge port (1/4-in NPT)
Top inlet and outlet ports (use H, I, J on outlet)
Description
A
B
C
D
Port types
1
Threads
Model
CDS100
Model
CDS60
SAE - ORB
#8
#10
#12
3/4 -16UNF 7/8 -14UNF 1 1/16-12UNF
Inlet
outlet
Section
BSP - Parallel
3/8 -19
1/2 -14
3/4 -14
M18x1.5
M22x1.5
M27x2
Inlet
outlet
Section
X
Special porting, specify
Code
available
33
E60 A C2 140/40*
D Top inlet and outlet (use with H,I,J, and L outlet covers)
A Top inlet
C Top inlet, gauge port side (1/4 in NPT)
B Side inlet (top plugged)
Relief valve
B
h1 in
11
[0.43]
C
h 1 in
h 7/8 h 7/16
67
[2.64]
max
D
h1 in
47
[1.85]
E Ref. 10782 or
504069
(consult factory for
dimensional drawing)
P101 798
mm [in]
* Default relief setting if not specified
34
Mid-inlet flow
dividers and
combiners order
code
I60
122 140/40*
Models
Code
Description
I60
I100
CDS 60 mid-inlet
CDS100 mid-inlet
Mid-inlet type
Code
Description
1
2
Flow divider
Flow combiner
Port types
Note: At this time, North
America only stocks SAEOring boss.
Code
Threads
Model
CDS100
Model
CDS60
#8
3/4 -16UNF
SAE - ORB
#10
7/8 -14UNF
#12
1 1/16-12UNF
Mid-inlet
Mid-inlet
available
Description
1
2
3
Plug
CDS 60 relief
CDS 100 relief
35
Inlet
(Second pump)
A
Relief valve
A B
Outlet
Bypass
Bypass outlet
Pressure
Outlet
Inlet bypass
P106 328E
Pressure
A B
Relief
valve
Outlet
Inlet
(First pump)
A
(Second pump)
B
Relief valve
Plug
Outlet
Bypass
Bypass outlet
Pressure
Outlet
Inlet bypass
P106 329E
Pressure
36
S60 A2
Description
CDS 100
CDS 60
Ports
Code
A
B
C
D
E
F
G
H
I
J
L
Description
Top outlet
Side outlet, top plugged
Side outlet for power beyond (top to tank)
Top outlet (with closed bypass)
Top outlet (for electrical control)
Top outlet (for electrical control, with power beyond)
Side outlet (for electrical control, top plugged)
Top plugged
Top plugged, use with power beyond
Top plugged for electrical control
Top plugged for electrical control, use with power beyond
Port types
1
Threads
Model
CDS100
Model
CDS60
SAE - ORB
#8
#10
#12
3/4 -16UNF 7/8 -14UNF 1 1/16-12UNF
Inlet
outlet
Section
BSP - Parallel
3/8 -19
1/2 -14
3/4 -14
M18x1.5
M22x1.5
M27x2
Inlet
outlet
Section
X
Special porting, specify
Code
available
37
S60 A2
T
Bypass
Pressure
Outlet
H Top plugged
A Top outlet (side plugged)
PB
T
Bypass
Pressure
Outlet
PB
30
[1.18]
D*
T
Bypass
Pressure
Outlet
25
[0.98]
T
Bypass
Pressure
Outlet
T
Bypass
Pressure
Outlet
30
[1.18]
T
Bypass
Pressure
Outlet
PB
T
Bypass
Pressure
Outlet
PB
CDS 60 30.5
[1.20]
CDS 100 32
[1.25]
T
Bypass
Pressure
Outlet
PB
CDS 60 30.5
[1.20]
CDS 100 32
[1.25]
P101 799E
38
39
Spring centered
3 position detent
Spring centered, detent in A
Spring centered, detent in B
Spring centered, detent in A and B
Spring centered, hydraulic kickout
Spring centered, adjustable stroke
Spring centered, female extension
Spring centered, male extension
Spring centered, detent in float: use for floatation spool
Spring centered, use for electrical command
By spring offset
2-position detent, spool in
2-position detent, spool out
With switch, activates spool in
With switch, activates spool in and out
With switch, activates two motors
Port types
1
Threads
Model
CDS100
Model
CDS60
SAE - ORB
#8
#10
#12
3/4 -16UNF 7/8 -14UNF 1 1/16-12UNF
Inlet
outlet
Section
BSP - Parallel
3/8 -19
1/2 -14
3/4 -14
M18x1.5
M22x1.5
M27x2
Inlet
outlet
Section
X
Special porting, specify
Code
available
Note: at this time, North America only stocks SAE O-ring boss.
Auxiliary valves, page 50-51
A
B
C
D
E
F
Plug
Direct relief with external adjustment (except electrical actuation)
Direct relief with internal adjustment
Pilot retaining
Flow control valve (electrical actuators mounted upside down)
Anti-cavitation
Direct relief with anti-cavitation and external adjustment
G
(except electrical actuation)
H
Plastic plug
I
Direct relief with anti-cavitation and internal adjustment (electrical only)
J
Plug, for 3-way spools
K
Plug, for valves D and E
L
Plastic plug, for flow control valve
M
Plastic plug, for PO checks
For valves B, C, G, and I, specify pressure and flow
Example: B(140/40) Pressure 140 bar flow 40 l/min
40
Spool compatibility
Model
A60/100 with pilot retaining
A60/100 with pilot retaining and hydraulic unlock
A60/100 with pilot retaining and electrical spool control
A60/100 with flow control
A60/100 with flow control and hydraulic unlock
A60/100 with out pilot retaining
A60/100 with out pilot retaining with hydraulic unlock
A60/100 with out pilot retaining and electrical spool control
B60/100
B60/100 with hydraulic unlock
B60/100 with electrical spool control
A, C, D
Spool types
B, G, H
E
F
41
Circuit types
P101 696
Bypass
Pressure
Inlet
Work sections
Outlet
When two or more sections operate simultaneously, flow favors the lowest pressure.
P101 697
Bypass
Pressure
Inlet
Work sections
Outlet
When two or more sections operate simultaneously, only the section closest to the inlet receives flow.
P101 698
Bypass
Work Sections
Outlet
When two or more sections operate simultaneously, the section closest to the inlet receives flow. Return
flow feeds the sections downstream.
* Default relief setting if not specified
42
Spool types
Standard central body
Bypass core
P101 743
Pressure core
Tank (x2)
Ref.
Description
Symbol
P T
* Default relief setting if not specified
43
Actuation options
30 CDS 60
[1.18]
34
[1.34] CDS 100
6.4
CDS 60
[0.25]
8.4
CDS 100
[0.33]
M8 x 1.25
M10 x 1.5
F
D With support
C Male spool end (tang)
8
[0.31]
66
CDS 60 [2.60]
70
CDS 100 [2.76]
M10 x 1.5
30
[1.18] CDS 60
34
[1.34] CDS 100
8.3
[0.33]
F Pneumatic
8
[0.31]
50
[1.97]
1/8" NPT (2x)
E With lever
113
[4.45]
15
15
213
[8.39]
L Hydraulic
56
CDS 60 [2.20]
60
CDS 100 [2.36]
7/16 in UNF
SAE # 4 (2x)
mm [in]
44
D*
A*
B*
6
[0.24]
26
[1.02]
280
[11.02]
7
[0.28]
7
[0.28]
30
50
[1.97]
30
25
25
395
[15.55]
157
[6.18]
48
[1.89]
40
[1.57]
70
[2.76]
118.5
[4.66]
50
[1.97]
97
[3.82]
P101 779
2
1
307
[12.09]
15
15
M
2
1
83
[3.27]
(Ref.)
J Electrical**
117
[4.61]
(Ref.)
DIN 43650
Flying leads
90
[3.54]
(Ref.)
12VCC
12VCC
24VCC
24VCC
96
[3.78]
(Ref.)
Manual override
P101781a
mm [in]
* Default relief setting if not specified
520L0564 Revision B February 2006
45
N Enclosed lever
100 [3.94]
P106 326
P106 325
46
A
B
C
Without lock
Lock in A and/or B
Lock in central position
100 - 125 - 150 - 175 - 200- 250 - 275- 300 - 325 - 350 - 400 - 450 - 500 cm (other: consult)
A60 - 1AG2A1 - AB - A100 - 140/40 (lever without lock, 100 cm cable)
D
E
Two On-Off-On
Two On-Off-On switches and
Without switches On-Off switch On-Off-On switch
switches
one On-Off switch
100 - 125 - 150 - 175 - 200 - 250 - 275 - 300 - 325 - 350 - 400 - 450 - 500 cm (other: consult)
A60 - 1AH2A1 - AB - A100 - 140/40 (handle without switches, 100 cm cable)
Force requirements
kgf [lbf ]
Push/pull min.
Max. tension
CDS 100
3.5 [7.7]
250 [551]
Voltage
12 VDC
24 VDC
Power: 21 W
CDS100
CDS60
CDS100
P101 796
P
P
T
P101 822
Actuation mounting
side
Electrical specifications
CDS 60
2 [4.4]
250 [551]
CDS60
* Default relief setting if not specified
47
B 3 position detent
A Spring centered
32
[1.25] CDS 60
40
[1.57] CDS 100
32
[1.25] CDS 60
40
[1.57] CDS 100
56
CDS 60
[2.20]
73
[2.87] CDS 100
Spring force
CDS 60: 145-155 N [32-35 lbf ]
CDS 100: 240-245 N [54-55 lbf ]
56
CDS 60
[2.20]
73
[2.87] CDS 100
56
CDS 60
[2.20]
73
[2.87] CDS 100
885
[3.460.2] CDS 60
93 5
[3.66 0.2] CDS 100
70 CDS 60
[2.76]
81
CDS 100
[3.19]
8
[0.31]
CDS 60
6.4
[0.251]
8.4
[0.331]
CDS 100
Note: Adjustable in both
directions.
8
[0.31]
8.3
[0.33]
20.5
[0.81]
20
[0.79]
10 CDS 60
[0.39]
12.5 CDS 100
[0.49]
Float in
82 CDS 60
[3.23]
101 CDS 100
[3.97]
Float out
mm [in]
48
M Spring offset
N Two-position detent:
32
[1.26] CDS 60
40
[1.57] CDS 100
CDS 100
CDS 60
6.5 [0.26]
8.0 [0.32]
CDS 100
32
[1.26] CDS 60
40
[1.57] CDS 100
CDS 60
32
CDS 60
[1.26]
40
CDS 100
[1.57]
O Two-position detent:
CDS 60
6.5 [0.26]
8.0 [0.32]
CDS 100
32
[1.26] CDS 60
40
[1.57] CDS 100
32
[1.26]
40
[1.57]
6.5 [0.26] CDS 60
8.0 [0.32] CDS 100
P106 330E
mm [in]
* Default relief setting if not specified
520L0564 Revision B February 2006
49
Auxiliary valves
11
[0.43]
1 in
For 3 ways spools.
10
[0.39]
1 in
For valves B, C, F, G, and I
B
T
11
[0.43]
1 in
For valves D and E.
1 in
11/16
7/16
67
[2.64]
Max
1 in
47
[1.85] Standard
29 Short version
[1.14] (use with electrical
actuation)
D4
1 in
16
[0.63]
E4
1 in
7/8
5/8
CDS 60
Knob
62
[2.44]
Max
1 in
12
[0.47]
1 in
11/16
7/16
70
[2.76]
Max
1 in
P101 746E
29
[1.14]
mm [in]
50
Not compatible
Compatible
Compatible (ONLY electrical)
Y
46
[1.81]
30
[1.18]
82
[3.23]
46
[1.81]
142
[5.59]
38
[1.49]
100
[3.94]
25
[0.98]
25
[0.98]
10
[0.39]
R 5.5
[0.22]
A
t 27 Nm
20 lbfft
P
127
[5.00]
15
[0.59]
44.5
[1.75]
Reference dimensions
Number of
sections
1
2
3
4
5
6
7
8
9
10
11
12
X
95
139
184
229
273
318
362
406
451
495
540
584
Y
[3.74]
[5.47]
[7.24]
[9.02]
[10.75]
[12.52]
[14.25]
[15.98]
[17.76]
[19.49]
[21.26]
[22.99]
137
181
226
270
314
359
403
448
492
537
581
626
[5.39]
[7.13]
[8.89]
[10.63]
[12.36]
[14.13]
[15.87]
[17.64]
[19.37]
[21.14]
[22.87]
[24.65]
mm [in]
* Default relief setting if not specified
520L0564 Revision B February 2006
51
Dimensions CDS 60
56
74*
[2.20] [2.91]
38
[1.50]
24
[0.94]
38
[1.50]
119
[4.69]
82
[3.23]
32
[1.26]
14
[0.55]
18
[0.71]
18
[0.71]
Reference dimensions
Number of
sections
1
2
3
4
5
6
7
8
9
10
11
12
T
28.5
[1.12]
26
[1.02]
98
[3.86]
B
t 18 Nm
13 lbfft
r. 4.5
[0.18]
X
72
108
144
180
216
252
288
324
360
396
432
468
Y
[2.83]
[4.25]
[5.67]
[7.09]
[8.50]
[9.92]
[11.34]
[12.76]
[14.17]
[15.59]
[17.01]
[18.43]
112
148
184
220
256
292
328
364
400
436
472
508
[4.41]
[5.83]
[7.42]
[8.66]
[10.08]
[11.50]
[12.91]
[14.33]
[15.75]
[17.17]
[18.58]
[20.00]
13
[0.51]
P101 795
36
[1.42]
Mounting requirements
A
77
78
P106 331E
Flatness 0.5-0.8 [0.02 to 0.03] max
52
Typical applications
Standard features
53
6.9
[100]
6.2
[90]
5.5
[80]
4.8
[70]
4.1
[60]
3.4
[50]
2.8
[40]
2.1
[30]
1.4
[20]
0.7
[10]
0
8-Spool Valve
2-Spool Valve
3.8
[1]
8-Spool Valve
2-Spool Valve
3.8
[1]
54
9.7
[140]
8-Spool Valve
8.3
[120]
6.9
[100]
5.5
[80]
4.1
[60]
2-Spool Valve
2.8
[40]
1.4
[20]
0
0 3.8 7.6 11.4 15.1 18.9 22.7 26.5 30.3 34.1 37.8 41.6 45.4 49.2 53.0 56.8
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15]
159
[2300]
155
[2250]
152
[2200]
148
[2150]
145
[2100]
141
[2050]
138
[2000] 0
7.6
[2]
15.1
[4]
22.7
[6]
30.3
[8]
37.8
[10]
45.4
[12]
53.0
[14]
With system relief SVPR set to 138 bar [2000 psi] at 2.8 l/min [0.75 US gal/min]
55
8-Spool Valve
231
[3350]
230
[3300]
2-Spool Valve
224
[3250]
221
[3200]
217
[3150]
214
[3100]
210
[3050]
207
[3000] 0
7.6
[2]
15.1
[4]
22.7
30.3
37.8
[6]
[8]
[10]
Flow - l/min [USgal/min]
45.4
[12]
53.0
[14]
With work port relief SVLP set to 206 bar [3000 psi] at 2.8 l/min [0.75 US gal/min]
231
[3350]
8-Spool Valve
230
[3300]
224
[3250]
2-Spool Valve
221
[3200]
217
[3150]
214
[3100]
210
[3050]
207
[3000] 0
7.6
[2]
15.1
[4]
22.7
[6]
30.3
[8]
37.8
[10]
45.4
[12]
53.0
[14]
With work port relief SVLP set to 206 bar [3000 psi] at 2.8 l/min [0.75 US gal/min]
56
SVPB
Inlet/outlet
Locations available
SVB
SVHC
Work ports
Power beyond
7/8-14 SAE 10
Inlet - top
Outlet - top on both sections SVSB and SVPB
3/4-16 SAE 8, 7/8-14 SAE 10
Power-beyond port machined and plugged. Remove plug and install
internal plug for power-beyond feature. 7/8-14 SAE 10
Handles SVM
Code
H
P
Technical data
Maximum pressure
Maximum tank line pressure
Maximum oil flow
Spool travel in and out from neutral
Maximum port leakage at 69 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Maximum lift check leakage at 70 bar [1000 psi]
21 mm/sec (cSt) [102 SUS]
Minimum oil temperature
Maximum oil temperature
Ambient temperature range
Minimum viscosity
Maximum viscosity
Fluid cleanliness per ISO 4406
Standard spool forces: Dry
Options
Description
Standard handle with C-hook kit (156B8587)
Pivot-block handle kit (156B8302)
205 bar
70 bar
38 l/min
4.8 mm
[3000 psi]
[1000 psi]
[10 US gal/min]
[0.19 in]
16 cm/min
[1 in/min]
82 cm3/min
[5 in/min]
-29 C
82 C
-29 to 60 C
6 mm/sec (cSt)
440 mm/sec (cSt)
19/16
205 N
[-20 F]
[180 F]
[-20 to 140 F]
[45 SUS]
[2000 SUS]
[46 lbf ]
Spool types
Code
O
Symbol
Description
B,D or F
A,C or E
T
B,D or F
A,C or E
4-way, 4-position
Open center
Work-ports blocked to tank in neutral position
T
B,D or F
4-way, 3-position
Closed center motor
Work-ports open to tank in neutral position
3-way, 3-position
Open center
Work-ports blocked to tank in neutral - B port
57
Description
3-position detent (156B8399)
Spring centered (156B8315)
Description
Pilot operated relief valve
0.4 bar/l [20 psi/gal] rise
No restrictions on setting up to 207 bar [3000 psi]
Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Std. Setting - 83 bar [1200 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Std. Setting - 172 bar [2500 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Typical circuit
SVPB
SVB
SVSB
SVHC
PB
P
SVPR
T
T
SVLP
58
SVLD
SVLP
OUTLET PORT
7/8-14 SAE
WORK PORTS
3/4-16 SAE
8 PLACES
36.5
19.1
[1.44]
[0.75]
NEUTRAL
IN 4.8
[0.19]
4.9
OUT
[0.19] 22.3
[0.88]
8.6
[0.34]
170.8
[6.72]
17.3
[0.68]
62.1 TYP.
[2.44]
33.3
[1.31]
Dim. B
[1.375]
Dim. A
68.6
[2.70]
MOUNTING HOLES
5/16-24 UNF-2B
4 PLACES
OUTLET PORT
7/8-14 SAE
16.0
[0.63]
16.0
[0.63]
19.1
[0.75]
120.2
[4.73]
44.4
[1.75]
INLET PORT
7/8-14 SAE
88.5
[3.48]
72.6
[2.86]
87.4
[3.44]
100.6
[3.96]
65.2
[2.57]
83.8
[3.30]
34.92
[1.375]
Sections
I&O
I&O&B
I & O & 2B
I & O & 3B
Dimension A
158.8 [6.25]
193.5 [7.62]
228.6 [9.00]
263.7 [10.38]
183.7
[7.23]
34.92
[1.375]
93.2
[3.67]
PIVOT-BLOCK
OPTION
mm [in]
Spools
2
3
4
5
181.3
[7.14]
106.7
[4.20]
Dimension B
1.375
2.750
4.125
5.50
Spools
6
7
8
I = INLET
Sections
I & O & 4B
I & O & 5B
I & O & 6B
O = OUTLET
Dimension A
298.5 [11.75]
333.5 [13.13]
368.3 [14.50]
Dimension B
6.875
8.250
9.625
59
SVPB
INLET SECTION
NO RELIEF
PORT RELIEF
SYSTEM RELIEF
SYSTEM & PORT RELIEF
O
T
V
156B8353 156B8354 156B8355
156B8356 156B8357 156B8358
156B8359 156B8360 156B8361
156B8362 156B8363 156B8364
SVPR
SYSTEM RELIEF VALVE
156B8009
SVSK
SEAL KITS
156B8181 -1
156B8181 -2
156B8181 -3
156B8181 -4
156B8181 -5
156B8181 -6
156B8181 -7
SVMB
SPOOL ACTION KITS
156B8399 SPRING-CENTERED
156B8315 3-POSITION DETENT
SVM
ACTUATION
156B8587 HANDLES
156B8302 PIVOTS
SVLP
WORK PORT RELIEF VALVES
156B8311 500-2500 psi
156B8312 2500-3000 psi
SVB
WORK SECTION
NO PORT RELIEF
PORT RELIEF
SVSB
O
V
OUTLET SECTION
T
NO PORT RELIEF 156B8371 156B8372 156B8373
PORT RELIEF
156B8374 156B8375 156B8376
SVHC
POWER-BEYOND KIT
156B8380
SVLD
WORK PORT RELIEF PLUG KIT
156B8379
Available on both "A" & "B" work
ports for all sections.
60
T
O
V
156B8365 156B8366 156B8367
156B8368 156B8369 156B8370
SVAS
TIE-ROD KITS
156B8306 -2
156B8053 -3
156B8307 -4
156B8308 -5
156B8054 -6
156B8309 -7
156B8310 -8
Tandem Models: 1500, 1530, 1612,1617, 1618,1025,1225, and 1421 (1618- PO Check Capable)
Parallel Models: 1627, 1637, 1638 And 1681. (1638- PO Check Capable)
Series Models: 1622, 1632, and 1635 (Contact Sauer-Danfoss)
Model
Ordering code:
1 2 3 2 3 2 3
Qty._ _____________
4 4A 5 6 7 8
1. Model (4 digits)......................................................................................................................................
#1
#2
#3
#1
#2
#3
3. Spool action.............................................................................................................................................
2. Spool type T, X, O, V, C, R, F
4. Relief valve...............................................................................................................................................................................
1.
2.
3.
No relief required
Direct acting ball and spring (use for 30 l/min [8 US gal/min] and below)
Standard setting is 83 bar [1200 psi] crack pressure at 2.85 l/min [0.75 US gal/min]
Pilot operated relief valve (use for 30 l/min [8 US gal/min] and above)
Standard Setting is 138 bar [2000 psi] crack pressure at 2.85 l/min [0. 75 US gal/min]
(See porting, table 2 next page, to ensure option availability)
4A.......................................................................................................................................................................................................
0
1
Standard Setting
Special Setting
(Specify Special Setting Required) ________ Pressure at _________ US gal/min
(See table 2, next page, for standard port sizes offered for each model)
6. Handles......................................................................................................................................................................................
C
F
H
M
N
P
7. Packing.......................................................................................................................................................................................
S Individually boxed
Bulked packed
Isolates inlet to tank neutral flow, directs flow to desired function down stream of valve
(Bushing required)
Bushing port size
0 None
1 9/16 in
2 3/4 in
3 7/8 in
61
T
4-way, 3-pos.
open center
work ports blocked to
tank in neutral position
T
A
O
4-way, 3-pos.
open center
work ports open to tank
in neutral position
X
3-way, 3-pos.
open center
work port blocked to tank
in neutral - A port
V
3-way, 3-pos.
open center
work port blocked to tank
in neutral - B port
C
4-way, 3-pos
closed center
work ports blocked to tank
in neutral position
R
4-way, 3-pos
closed center
work ports open to tank
in neutral position
F
4-way, 3-pos
open center
work ports blocked to tank in neutral
open to tank in fourth position float
Table 2 porting
Model
4 - No Relief Valve
62
Model
Side
Model
Model
Size
Port
Size
Price US $:
Number of sections =
12th
11th
10th
9th
8th
7th
6th
5th
4th
3rd
2nd
1st
Work
section
Work Sections
Model
Inlet Section
Customer
Circuit
Type
Main
relief
Valves
Delivery:
Spool
Types
Threads
Spool
Controls
Port Side
Pressure
Spool
Control
Side
Port Side
Flow
Center
Type
Threads
Paint
Aux Valves
A
Cable or
Aux Valves Electrical
B
Control
Options
Black Paint
None
Application
Date:
Cable
Length
Centimeters
Model
Ports
Options
A Port Side
A Port Side
Pressure
Flow (l/min)
(Bar)
Model Size
Outlet Section
Subsidiary/Dealer
Control No.
B Port
Side
Pressure
(Bar)
Threads
B Port
Side Flow
(l/min)
63
64
Main relief
Valves
Threads
Port Side
Pressure
Port Side
Flow
Model
Model Size
Price:
Number of sections =
12th
11th
10th
9th
8th
7th
6th
5th
4th
3rd
2nd
1st
Work
section
Work Sections
Circuit Type
Spool
Types
Spool
Controls
Spool
Control Side
Center
Type
Threads
Aux
Aux Valves
Valves
A
B
Cable or
Electrical
Control
Options
Cable Length
Centimeters
A Port Side
Pressure
(Bar)
Model Size
Model
Port Size
Outlet Section
Model
Side
Model
Application
Threads
B Port
A Port Side Side
Flow (l/min) Pressure
(Bar)
Ports
Options
Subsidiary/Dealer
Control No.
Inlet Section
Customer
B Port
Side Flow
(l/min)
Customer: _______________________________________________
A-Port
SVLP/D 156B ________________
_______psi @_______US gal/min
SVM 156B ___________________
Application: ______________________________________________________
156 ________________________
________psi @_______US gal/min
SVM 156B ___________________
SVB
SVMB
156B _______________
156B _______________
156B ________________________
________psi @ ______US gal/min
SVM 156B ___________________
156B ________________________
_______psi @ _______US gal/min
SVM 156B ___________________
SVB
SVMB
156B _______________
156B _______________
156B ________________________
_______psi @ _______US gal/min
SVM 156B ___________________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
SVB
SVMB
156B _______________
156B _______________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
SVB
SVMB
156B _______________
156B _______________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
SVB
SVMB
156B _______________
156B _______________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
SVB
SVMB
156B _______________
156B _______________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
156B ________________________
_______psi @ ______US gal/min
SVM 156B ___________________
Outlet
SVHC
SVB
156B _______________
SVMB
156B _______________
156B ___________________
156B ________________________
______psi @ ______US gal/min
SVM 156B ___________________
SVAS:
156B ___________________
SVSK:
156B ___________________
Date: ___________________
65
An order form for Sauer-Danfoss SV 1125 hydraulic valve is shown on the next page.
Photocopy this form and use it for ordering.
The order form is divided into fields.
Each module has it own field:
0: Combination pump and spool
module, SVPB
1-6: Basic spool module, SVB
a: Mechanical actuation SVM
b: Spool action types, SVMB
c: Shock valve SVLP
7: Combination tank and spool module, SVAS
SVSB
9: Assembly kit SVAS
Reordering
The space at the top right-hand corner of the form is for Sauer-Danfoss to fill in. The code
number for the whole of the 1125 group is entered here.
In the event of a repeat order all you have to do is enter the number Sauer-Danfoss has
given on the initial confirmation of order.
Please state:
Code number of all modules required
Required setting (p) SVPR
Note:
If the 1125 is to be used with phosphate ester this must be stated on the order form.
66
67
OUR PRODUCTS
Hydrostatic transmissions
Hydraulic power steering
Electric power steering
Electrohydraulic power steering
Closed and open circuit axial piston
pumps and motors
Gear pumps and motors
Bent axis motors
Orbital motors
Transit mixer drives
Planetary compact gears
Proportional valves
Directional spool valves
Cartridge valves
Hydraulic integrated circuits
Hydrostatic transaxles
Local address:
Integrated systems
Fan drive systems
Electrohydraulics
Microcontrollers and software
Electric motors and inverters
Joysticks and control handles
Displays
Sensors
Sauer-Danfoss ApS
DK-6430 Nordborg, Denmark
Phone: +45 7488 4444
Fax: +45 7488 4400
Sauer-Danfoss-Daikin LTD
Sannomiya Grand Bldg. 8F
2-2-21 Isogami-dori, Chuo-ku
Kobe, Hyogo 651-0086, Japan
Phone: +81 78 231 5001
Fax: +81 78 231 5004
www.sauer-danfoss.com