Professional Documents
Culture Documents
2
in.
(c) The rules in Section VIII, Division 1, Subsection
C, Part UHA, for austenitic stainless steel shall apply.
(d) The maximum design metal temperature shall
not exceed 400F.
(e) The maximum allowable design stress values
shall be those listed in Table 3.
(f) For external pressure design, use Fig. 5,
UHA-28.1.
(g) Separate welding procedure and performance
qualications shall be conducted for the material in
accordance with Section IX. Welding shall be limited
to the GTAW and GMAW processes.
(h) This Case number shall be included in the material
identication and on the Data Report.
This is Electrontic File Page # 103
TABLE 1
CHEMICAL REQUIREMENTS
Element Weight, %
Carbon, max. 0.07
Manganese, max. 2.00
Phosphorus, max. 0.045
Sulfur, max. 0.030
Silicon 4.86.0
Nickel 19.022.0
Chromium 16.519.5
Molybdenum 0.31.5
Copper 1.52.5
TABLE 2
MECHANICAL PROPERTY REQUIREMENTS
Tensile strength, min., ksi 80
Yield strength, 0.2% offset, min., ksi 32
Elongation in 2 in., min., % 25
TABLE 3
MAXIMUM ALLOWABLE STRESS VALUES
For Metal Temperature
Not Exceeding, F Stress Values, ksi
100 20.0 20.0 [Note (1)]
200 17.6 19.9 [Note (1)]
300 16.5 19.0 [Note (1)]
400 15.4 18.4 [Note (1)]
NOTE:
(1) See Footnote 1 to Table UHA-23.
Asme BPVC Code Cases 1998 Edition CCASE12029 06-15-98 13:07:21
This is Electrontic File Page # 104