Professional Documents
Culture Documents
8
in.
Impact testing is required on all thickness of material
when the material is used at temperatures colder than
20F, except as exempted by para. AM-204.2(c).
(g) This Case number shall be included in the mark-
ing of the material and shall be shown on the Manufac-
turers Data Report.
CAUTIONARY NOTE: Exposure to temperatures in the range of
1100F to 1700F for relatively short periods of time may result in
severe loss in ductility due to sigma phase formation.
TABLE 1
DESIGN STRESS INTENSITY AND YIELD
STRENGTH VALUES
1
Design Stress
Intensity Yield
For Metal Temperature Values, ksi Strength
Not Exceeding, F [Note (2)] Values, ksi
100 30.0 65.0
200 30.0 57.8
300 28.9 53.9
400 27.9 51.2
500 27.2 49.7
600 26.9 47.1
NOTES:
(1) This material may be expected to develop embrittlement after
service at moderately elevated temperatures. See Appendix K.
(2) For SA-789 and SA-790 welded pipe and tube, a factor of 0.85
shall apply.
Asme BPVC Code Cases 1998 Edition CCASE12067 06-15-98 13:13:49
This is Electrontic File Page # 130