Professional Documents
Culture Documents
SMD CAPACITORS
TYPE CMC
GENERAL INFORMATION
NPO (COG), X7R, Z5U Temperature Coefficients 50,
100 Volts & Y5V 25 and 16 Volts.
CMC Chips can be supplied with established reliability
screening per MIL-C 55681, or high reliability screening
upon request.
TAPE & REEL QUANTITIES
All tape and reel specifications are in compliance with
RS481.
Standard Electrodes
8mm
12mm
Sizes
Embossed Carrier
Punched Carrier
0603-1210
1812-1825
Punched only
Pieces/7" Reel
Pieces/13" Reel
0402-0603
2000 (4000 low T)
10,000
1,000
4,000
0402
0603
0805
1206
1210
1812
1825
Length
mm
(in.)
1.00 .10
1.60 .15
2.01 .20
(.040 .004) (.063 .006) (.079 .008)
3.2 .20
3.20 .20
4.5 .30
4.5 .30
(.126 .008) (.126 .008) (.177 .012) (.177 .012)
Width
mm
(in.)
.50 .10
.81 .15
1.25 .20
(.020 .004) (.032 .006) (.049 .008)
1.60 .20
2.50 .20
(.063 .008) (.098 .008)
Thickness
Max.
.60
(.024)
.90
(.035)
1.30
(.051)
1.50
(.059)
Endband
mm
(in.)
.25 .15
(.010 .006)
.35 .15
(.014 .006)
.50 .25
(.020 .10)
.50 .25
(.020 .010)
3.20 .20
(.126 .008)
6.40 .40
(.252 .016)
1.70
(.067)
1.70
(.067)
1.70
(.067)
.50 .25
(.020 .010)
.60 .35
(.024 .014)
.60 .35
(.024 .014)
050
103
1206
CERAMIC
MONO
CHIP
100
EIA
STD. CODE
IN P.F.
EIA
TOL
CODE
DIELECTRIC
MATERIAL
N = NPO
X = X7R
Z = Z5U
Y = Y5V
CASE
SIZE
PKG CODE
T = T/R
MARKING
(Only If Required)
W = Waffle
WVDC
200
100
50
25
100
50
25
16
10
25
16
10
6.3
50
25
50
25
16
10
6.3
X7R
X5R
Z5U
Y5V
0402
0R1-680
0R1-101
0R1-181
0R1-221
121-272
121-562
121-562
121-682
121-104
121-183
121-273
121-223
121-333
121-393
222-104
222-104
TOL.
0.1pf
.25pf
CODE
0603
0R1-271
0R1-331
0R1-681
0R1-821
121-103
121-183
121-223
121-104
121-224
334-684
105
121-683
121-104
121-823
121-124
121-474
222-105
222-225
0805
0R1-122
0R1-182
0R1-332
0R1-392
121-563
121-154
121-334
121-105
121-105
105
225
335-475
391-334
391-474
471-105
471-105
471-225
103-475
103-106
1206
0R5-392
0R5-562
0R5-103
0R5-123
121-124
121-424
121-105
121-225
121-475
335-475
106
561-105
561-125
681-225
681-475
681-475
103-226
103-226
1210
3R0-822
3R0-103
3R0-223
3R0-223
121-274
121-105
121-335
121-475
121-106
225
475
106
226
561-185
561-225
681-475
681-106
681-106
103-226
103-226
1812
150-123
150-183
150-333
150-393
471-564
471-824
471-105
471-125
106
226
476
272-395
272-475
332-475
332-565
332-106
332-476
103-476
1825
390-393
390-563
390-823
390-823
821-155
821-155
821-185
821-185
822-825
822-106
103-106
103-126
103-126
103-126
103-126
2225
390-473
390-683
390-104
390-104
821-155
821-185
821-185
821-225
821-225
476
822-106
822-126
103-126
103-156
103-186
103-186
103-107
.50pf
1.0%
2.0%
5%
10%
20%
-0 + 100%
-20% - +80%
P (GMV)
E.23
MONOLITHIC CERAMIC
SMD CAPACITORS
TYPE CMC
Y5V ceramics, Class III dielectric offer the highest capacitance values available. Ideally suited for bypass and
decoupling applications where space is at a premium or as replacements for tantalum capacitors. Best performance
is obtained at or near room temperature and at low DC bias conditions.
Temperature Coefficient:
Dissipation Factor:
Insulation Resistance:
Dielectric Strength:
Test Conditions:
Capacitance Tolerance:
L
0.021
0.035
0.035
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.050
0.050
0.050
0.050
0.060
Dimensions (inches)
W
S
0.022
0.017
0.050
0.020
0.030
0.030
0.050
0.040
0.050
0.060
0.070
0.050
0.065
0.080
0.050
0.110
0.050
0.130
0.100
0.080
0.080
0.130
0.120
0.130
0.250
0.130
0.250
0.170
0.400
0.300
T
0.059
0.090
0.100
0.120
0.140
0.130
0.160
0.190
0.210
0.160
0.230
0.230
0.230
0.270
0.420
*These sizes are recommended for use with IR and vapor phase soldering only and
with the use of stress relieving lead frames is recomended.
E.24
MONOLITHIC CERAMIC
SMD CAPACITORS
TYPE CMC
NPO ceramics, Class I, offer one of the most stable capacitor dielectric available. Typical capacitance change with
life is less than 0.1% for NPOs, one-fifth that shown by most other dielectrics.
The NPO formulation usually has Qs (Quality Factor) in excess of 1000 and show little capacitance or Q changes
with frequency.
The inherent stability of these devices makes them ideally suited for use in precision applications such as oscillator,
filtering and timing circuits.
Temperature Coefficient:
Dissipation Factor:
Insulation Resistance:
Dielectric Strength:
Testing Conditions:
Capacitance Tolerance:
E.25
MONOLITHIC CERAMIC
SMD CAPACITORS
TYPE CMC
X7R ceramics, Mid-K, Class II, are the most temperature-stable ceramics in their class. Capacitance for X7R
varies under the influence of electrical operating conditions such as voltage and frequency. It also varies with time,
approximately 2.5% C per decade hour, representing about 12.5% change in ten years.
These devices are suited for bypass and de-coupling applications, filtering, frequency discrimination, DC blocking,
and voltage suppression.
Temperature Coefficient:
Dissipation Factor:
Insulation Resistance:
Dielectric Strength:
Test Conditions:
Capacitance Tolerance:
E.26
MONOLITHIC CERAMIC
SMD CAPACITORS
TYPE CMC
Z5U ceramics, High-K, Class III, general purpose ceramics. They provide the highest capacitance possible in a
given size. They show wide variation in capacitance under influence of environmental and electrical operating
condition. Their aging rate is approximately 5% per decade hour or 25% drop in ten years.
Despite their capacitance instability, Z5U are very popular because of low ESR, low ESL, and excellent frequency
response.
Typical applications are as by-pass and decoupling with best performance being obtained at or near room temperature and low DC bias.
Temperature Coefficient:
Dissipation Factor:
Insulation Resistance:
Dielectric Strength:
Test Conditions:
Capacitance Tolerance:
E.27