T220 series relative humidity probe is equipped with the calibrated and fully interchangeable sensor module HUMICOR S6000. Maintenance cost is drastically reduced and machine downtime is minimised.
T220 series relative humidity probe is equipped with the calibrated and fully interchangeable sensor module HUMICOR S6000. Maintenance cost is drastically reduced and machine downtime is minimised.
T220 series relative humidity probe is equipped with the calibrated and fully interchangeable sensor module HUMICOR S6000. Maintenance cost is drastically reduced and machine downtime is minimised.
DIMENSIONS Main characteristics Measuring range: 0 ... 98 %rh, -30 ... +70 C Accuracy: 2 %rh, 0,2 C Output signal: 4 ... 20mA (2 wire), 0 ... 1V, 0 ... 5V, 0 ... 10V, 0 ... 20mA (3 wire), Pt100 1/3 DIN Supply voltage: 8...33VDC Interchangeable sensor module S6000 Linearised and temperature compensated humidity measurement Capacitive thin film humidity sensor Sensor response time: < 10 seconds CE conformity The T220 series relative humidity probe is equipped with the calibrated and fully interchangeable sensor module HUMICOR S6000, presenting an innovative element in humidity measurement. Maintenance cost is therefore drastically reduced and machine downtime is minimised. TECHNICAL DATA Connections Accuracy @ 23 C Temperature gradient Measuring range Sensor response time Output signal T220.1 T220.2 Temperature range Supply voltage: E Impedence: R Operating range Probe Housing Storage Housing Dimension Material Housing protection Electrical connections Humidity Temperature 2 or 3 wire 2 or 3 wire Hysteresis non-linearity included Pt100 1/3 DIN 2 %rh (5...95 %rh) direct: 0,2 C 2,5 %rh (< 5 %rh, > 95 %rh) Output 4/20mA: 0,3 C / < 0,02 C / C 0 ... 98 %rh (*) -30...+70 C (90% of scale for a step change / from 11% to 75 %rh) < 10 sec 4...20mA 4...20mA, Pt100 1/3 DIN (3 wire) 0...10V, 0...5V, 0...1V, 0...20mA Pt100 1/3 DIN (3 wire) / 0...50 C, -30...+70 C -30...+20 C Output 4...20mA: E = 9...33 VDC Output 0...10V: E=14...33 VDC Output 0...5V: E=10...33 VDC Output 0...1V: E=8...33VDC Output 0...20mA: E=15...33VDC Out. 4/20mA: R < ((E - 9) / 0,02) Output 0...10V: R > 1K Output 0...5V: R > 500 Output 0...1V: R > 100 Output .../20mA: R < 600 0 ... 100 %rh -30 ... +85 C 0 ... 98 %rh (*) -30 ... +70 C 0 ... 98 %rh (*) -40 ... +70 C L = 200mm, maxi. = 34,5mm ABS IP54 Screw terminal, tightening capacity 1mm 2 max. (*) Non-condensing LEADER Electronic Co., Ltd 116, J ianghuali, J ianghua Road, J iangmen City, GD, PRC Tel: +86 750 3101711, 3379183 Fax: +86 750 3388669 Website: www.leadersensors.com E-mail: leader@leadersensors.com code 85526 -05/00 GEFRAN spa reserves the right to make any kind of design or funcional modification at any moment without prior notice UNI EN 29001 - ISO 9001 Certificato nr. 9115.GEF1 ORDERING CODE Example: T220.13B Relative humidity transmitter T220 with output signal humidity 4/20mA, temperature 4/20mA (-30/70 C), slotted cap, DELRIN black. Models 2 wire, 4/20mA 1 T220 3 wire, 0/10V, 0/1V, 0/5V, 0/20mA 2 2 Temperature signal No temperature 0 Pt100 direct 1 Range 0 ... 50 C, 4...20mA Range -30 ... +70 C, 4...20mA 3 Range -30 ... +20 C, 4...20mA 4 (*) A knurled nut, ref. 1A04640, is necessary to fix these filter types B Protection cap / filter Slotted cap DELRIN, white A Slotted cap DELRIN, black (Standard) Slotted cap DELRIN, white with polyethylene filter C Slotted cap DELRIN, black with polyethylene filter D Slotted cap PVDF, white E Slotted cap PVDF, white, with teflon filter F Wire mesh filter, stainless steel G Sinter filter, stainless steel (*) H Sinter filter, stainless steel, teflon coated (*) I REMOVING THE S6000 ELECTRICAL CONNECTIONS MEASURING RANGE ACCESSORIES Control kit HKC : You can check your hygrometer with the control kit HKC which is based on the principle of non-saturated salt solutions. Refer to technical data sheet 85521 Interchangeable sensor module S6000: S6000 with Pt100 output: Ref. 6A03130 S6000 without Pt100 output: Ref. 6A08840 Mounting accessories for T220: Suspending clip (ref. 1772460) Mounting clip (ref. 2510307) Duct flange (ref. 3420045) Pt 100 (directe) Hr (4/20 mA) Alimentation 0/20 mA 0/10 V 0/1 V T 220.2 T 220.1 Pt100 (direct) rh (4...20mA) Power supply 0...20mA 0...10V 0...1V % HR 100 80 60 40 20 Rapport de mlange max: 250g d'eau/Kg d'air sec -30 0 50 68 70 Temp. C Max mixing ratio: 250 g water / kg dry air %rh Z o n e d e c lip s a g e AGRAFE DE SUSPENSION CLIPS DE FIXATION TRAVERSEE DE GAINE 25,4 50 2,4 18 6 2 8 , 6 1 9 , 0 5 Suspending clip Mounting clip Duct flange