You are on page 1of 21

Project: Standing Press Page 1 of 21

Standing Press





Make precise items by the measurements given on particular 2D drawings. The measurements
are given in millimeters, and the measurements in inches are given in brakes (1 inch = 25, 4 mm).

Do not forget to chamfer the edges on items 1, 2, 3, 7, 8, 9 and 11. This way, you will avoid
injuries that can happen while working with its very sharp edges. This should become a rule when
you work with metal items, which are made by cutting, milling or turning.

The Bearing Cover (item 11) has to be tempered in order to harden it. Besides that, this item has
to be made out of the quality steel of a high hardness.
Project from www.craftsmanspace.com
Project: Standing Press Page 2 of 21
Parts List

Project from www.craftsmanspace.com
Project: Standing Press Page 3 of 21
Assembly Drawing

Project from www.craftsmanspace.com
Project: Standing Press Page 4 of 21










Project from www.craftsmanspace.com
Project: Standing Press Page 5 of 21







Project from www.craftsmanspace.com
Project: Standing Press Page 6 of 21

Project from www.craftsmanspace.com
Project: Standing Press Page 7 of 21

















Project from www.craftsmanspace.com
Project: Standing Press Page 8 of 21

















Project from www.craftsmanspace.com
Project: Standing Press Page 9 of 21







Project from www.craftsmanspace.com
Project: Standing Press Page 10 of 21

Project from www.craftsmanspace.com
Project: Standing Press Page 11 of 21












Project from www.craftsmanspace.com
Project: Standing Press Page 12 of 21





















Project from www.craftsmanspace.com
Project: Standing Press Page 13 of 21





Project from www.craftsmanspace.com
Project: Standing Press Page 14 of 21


Project from www.craftsmanspace.com
Project: Standing Press Page 15 of 21

Project from www.craftsmanspace.com
Project: Standing Press Page 16 of 21
Assemblage Instructions


1. Weld the U Profile 80 x 45mm Cut Lenght 500,00mm (item 2) to the U Profile 80 x 45mm Cut
Lenght 295,00mm (items 1).




2. Weld the Top Plate (item 6) to the subassembly made in the previous step.




Project from www.craftsmanspace.com
Project: Standing Press Page 17 of 21


3. Weld the Side Plate (item 5) to the subassembly made in the previous step.





Project from www.craftsmanspace.com
Project: Standing Press Page 18 of 21
4. Weld the Top Plate (item 6) to the subassembly made in the previous step.




5. Weld the Shell (item 7) to the subassembly made in the previous step.


Project from www.craftsmanspace.com
Project: Standing Press Page 19 of 21


6. Weld the Leg Holder (items 3) to the subassembly made in the previous step.






Project from www.craftsmanspace.com
Project: Standing Press Page 20 of 21
7. Set the Legs (items 4) to the subassembly made in the previous step.




8. Set the Handle (item 9) to the Threaded Axle (item 8) and screw them to the subassembly made in
the previous step.



Project from www.craftsmanspace.com
Project: Standing Press Page 21 of 21
9. Fasten the Bearing (item 10) and the Bearing Cover (item 11) to the subassembly made in the
previous step with Slotted Set Screws M6x8mm (item 12)








Project from www.craftsmanspace.com

You might also like