Tile General Advice The installation of Allura should be carried out in accordance with BS8203 code of practice for the installation of resilient floor coverings. As with all resilient floor coverings, bases should be clean, smooth, sound and permanentl dr. !or standard installations "urocol #$0 "urosafe Special adhesive is recommended, however, if a low emission "%& adhesive is re'uired, "urocol ()$0 "urostar Special* should be used. +t is important to note that areas of installation liable to be sub,ected to abnormal temperature variation in use, for e-ample, premises with gla.ed window fronts, gla.ed patio doors, conservatories etc. must be adhered with "urocol ("uromi- /0* which is a two part rigid set polurethane adhesive. Acclimatisation /rior to installation, bo-es of tiles should be removed from the deliver pallet and stored not more than five bo-es high in the laing area for at least 2$ hours. The conditioning time should be e-tended to $8 hours if materials have been stored or transported at temperatures less than &0 o % immediatel prior to deliver. Installation options. 1ost Allura designs are non2 directional3 however, the following installation advice is given. Stone tiles ma be laid either in bond 4broadloom5 or bric6 pattern. Te-tile designs should be installed che'uerboard. Tiles and plan6s do not re'uire shuffling prior to installation, but dr laing will identif best use of design. /lease note that abstract stripe designs do not have a pattern match. 7i6e the natural material, some designs will var in tone and colour. This is intentional and gives the floor a more authentic appearance. Points to note As with all !orbo floor coverings, Allura can be used in con,unction with under2 floor heating sstems. A separate guidance note 8Installation of Forbo PVC and Linoleum Floor Coverings on Underfloor Heating Systems provides more information on the conditions for installation in such circumstances. 9nl spread sufficient adhesive that can be covered within the specified open time. Allura tiles should be rolled with a )8 6g roller as soon as possible after laing and within the open time of the adhesive : the open time of the adhesive will depend on site conditions and porosit of the base. Alwas clean awa e-cess adhesive with a damp cloth before it is allowed to dr. Forbo Flooring U! Ltd" #el$ %&%% %'&' ()' Fa*$ %(++' ),)-(' .mail$ info"flooring"u/0forbo"com" Issue Date: January 2014 1 Installation Guidance Note: Adhesives and Installation Allura Tile Allura should be protected from heav traffic for 2$ hours and must not be wet cleaned for $8 hours after installation. Additional 1eference documents2Information !orbo !loor coverings +nstallation ;uide. 4Tel< 0800 =3& 23)>5 BS8203<200&?A&<200> The %!A ;uide to %ontract !looring 4Tel< 0&&#> $&&&2)5 Forbo Flooring U! Ltd" #el$ %&%% %'&' ()' Fa*$ %(++' ),)-(' .mail$ info"flooring"u/0forbo"com" Issue Date: January 2014 2