You are on page 1of 4

Specifications

D3C, D4C AND D5C SERIES III TRACTORS POWER TRAIN


Steering Clutch Control Group

Shutdown SIS

Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5C TRACK-TYPE TRACTOR 3MK
Configuration: D5C & D5C LP TRACTOR! " PO#ER!$%&T " 3MK''''(-)P
*MAC$%+E, PO#ERED -Y 3.'/ E+%+E
Media Nume! "SENR5334"## Pu$ication Date "#%&#%&%''4 Date (pdated "%'&#3&)##3
Pgina 1 de 4 D5C & D5C LGP TRACTORS / POWERSHIFT / 3MK00001-UP (MACHINE) P...
21/09/2013 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...


D3C (6SL, 7XL)


D4C (6YL, 7SL)
Pgina 2 de 4 D5C & D5C LGP TRACTORS / POWERSHIFT / 3MK00001-UP (MACHINE) P...
21/09/2013 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...


D5C (9DL, 6ZL)
NOTE: The above illustrations are of vehicles equipped with pedal steering. Hoses, tubes and
routings are different on vehicles equipped with hand steering.
Torque for all 3/8 in locknuts that hold the rod ends in place on the rods ... 17 4 N m (13 3 lb ft)
(1) At assembly, apply 5P0960 Multipurpose Grease to all spherical surfaces on yoke.
(4) 8J6785 Spring:
Length under test force ... 32.0 mm (1.26 in)
Test force ... 46 4 N (10.3 .8 lb)
Free length after test ... 52.3 mm (2.06 in)
Outside diameter ... 49.43 mm (1.946 in)
(5) At assembly, apply 5P3413 Pipe Sealant to threads.
(7) At assembly, apply 7M7260 Liquid Gasket to the common faces of cylinder and steering clutch
case.
(A) Dimension between steering clutch housing and head of bolt (2) ... 8.0 1.5 mm (.31 .06 in)
Steering Clutch Adjustment
When adjusting the steering clutches, the brakes must be released. Put
blocks in front of and behind both tracks to prevent machine movement
during steering clutch adjustment.
Pgina 3 de 4 D5C & D5C LGP TRACTORS / POWERSHIFT / 3MK00001-UP (MACHINE) P...
21/09/2013 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
NOTE: The adjustments to the left steering clutch are the same as the adjustment to the right
steering clutch.
1. Release the brake pedals.
2. Make sure there are no bent linkages.
3. Loosen nut (3) and adjust bolt (2) to obtain dimension (A) between steering clutch housing and
head of bolt. Tighten nut (3).
4. With the pedals against stop, adjust the length of rod (6) so there is a clearance of 0.75 0.75 mm
(.029 .029 in) between cam (8) and the roller on the end of the valve group.
NOTE: On vehicles equipped with hand steering, the steering levers must be against the stop.
Co01rig2t (333 - .'(3 Cater0illar %nc4
All Rig2t5 Re5er6ed4
Pri6ate +et7or8 &or !%! Licen5ee54
!at !e0 .( (/:/.:/9 CDT .'(3
Pgina 4 de 4 D5C & D5C LGP TRACTORS / POWERSHIFT / 3MK00001-UP (MACHINE) P...
21/09/2013 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...

You might also like