You are on page 1of 1

ANNA UNIVERSITY : CHENNAI 600 025

B.E/B.Tech DEGREE EXAMINATIONS, APRIL/MAY 2014


Regulations R-2013
Second Semester
(B.E. Computer Science and Engineering)
CS6211 - Digital Laboratory
Date: 20-05-2014
Time: 3 Hours Maximum Marks: 100



1. Verify Boolean Theorems using basic logic gates. (100)
2. Design and implement half adder and full adder combinational circuits using basic logic gates. (100)
3. Design and implement half subtractor and full subtractor combinational circuits using basic logic
gates. (100)
4. Design and implement 4-bit Binary to gray code converter and Gray to binary code converter using
basic logic gates. (100)
5. Design and implement 4-bit BCD to excess-3 code converter and Excess-3 to BCD code converter
using basic logic gates. (100)
6. Design and implement 4-bit adder and subtractor using IC 7483. (100)
7. Design and implement an 8-bit magnitude comparator using IC 7485. (100)
8. Design and implement an 8-bit odd parity generator / checker using IC 74180. (100)
9. Design and implement an 8-bit even parity generator / checker using IC 74180 (100)
10. Design and implement multiplexer and demultiplexer using logic gates. (100)
11. Design and verify 4-bit asynchronous (ripple) counter. (100)
12. Design and implement 3-bit synchronous up/down counter. (100)
13. Design and implement 4-bit shift register under serial-in serial-out mode. (100)
14. Design and implement 4-bit shift register under serial-in parallel-out mode. (100)
15. Design and implement 4-bit shift register under parallel-in serial-out mode. (100)
16. Design and implement 4-bit shift register under parallel-in parallel-out mode. (100)
17. Perform the simulation of half adder and full adder combinational circuits using VHDL or Verilog
HDL. (100)
18. Perform the simulation of half subtractor and full subtractor combinational circuits using VHDL or
Verilog HDL. (100)
19. Perform the simulation of 4-bit asynchronous (ripple) counter using VHDL or Verilog HDL. (100)
20. Perform the simulation of 4-bit Synchronous up/down counter using VHDL or Verilog HDL. (100)
************



INTERNAL EXAMINER EXTERNAL EXAMINER

You might also like