Professional Documents
Culture Documents
Even when the particles are shifted, the contact, conductivity and
cathodic corrosion protection are maintained, as the pigments lie
closely on each other in sheets. This is, among other things, also
especially apparent due to the improved weldability of the coated metal
surface.
The penetration of water and moisture is considerably reduced, as the
flakes have a strongly hydrophobic (water repelling) surface.
The surface of the coating is smoother and harder, resulting in
improved adhesion and greater strength of the coating.
The quality of the pigments in the newWEICON Zinc Spray meets the
demanding requirement profile of renowned industrial users. Long-
termcorrosion protection that even withstands a salt-spray test (DIN
53167 and DIN 50021) of more than 550 hours is the result.
The use of the newWEICON Zinc Spray also results in advantages for
the appearance. The previous dull grey colour has been replaced by a
bright metallic appearance (similar to that of slightly weatheredhot
galvanising).
41. WEICON
ZINC SPRAY
(New Improved)
CASE PACKING
12 X 500ml / 13.0 oz Aerosol Sprays
The zinc flakes used in the new
WEICON Zinc Spray have a large,
specific surface geometry, and
therefore a high barrier effect
(shingle effect).
Final layer with WEICON FE-Protect -
Charcoal - Grey / Silver Grey
Intermediate layer with WEICON FE-
Protect - Charcoal Grey / Silver Grey
Primer layer with WEICON Zinc Spray
Bright as well
as matt finish
5 - 10 years
protection
Applications : Transformers, Switchyards,
TransmissionTowers ....
Bright Finish
3-5 years protection
After
After
After
I. DI-ELECTRIC SOLVENT CLEANERS I. DI-ELECTRIC SOLVENT CLEANERS
SCREEN/ DISPLAY CLEANER
(P) Weicon TFT/LCD Display
Cleaner
FLASHOVER CARBON CLEANER
(P) 8480 Carbon Cleaner
BATTERY TERMINAL
(P) #Z911 Corroclean
HEAVIER THAN WATER
(Proprietary)
(P) #8070 Electrical 88 Co2
(Long term protection)
(S) SP98E4 De-Moist.
HIGH FLASH POINT
(P) 8140 HFP CLEANER/ DEGREASER
(140
O
F Flash point)
GENERAL USE
(E) # 3070 Super 5
(Alternate to CRC 2.26)
FLAMMABLE
(E) 1020 Super Spra-Nit
(Heavy duty/ Kli-Nit type)
GENERAL USE
(P) #415 Off Line Contact Cleaner (HD) Co2
(Mild moisture displacing ability)
(S) #7075 Off Line E&E cleaner Co2 (F)
(High Discharge)
(E) 1010 Super E-Kleen Co2
(Light duty)
PARTIALLY PLASTIC SAFE
HEAVY DUTY
(P) #8060 Safety solvent Co2
(High KB Value)
(S) #7030 Online powerjet Co2
(High Discharge)
(S) Safety solv Co2
(360
O
)
PARTAL PLASTIC SAFETY
(P) 7066 Contact Cleaner Co2 (OKS 2621)
(High discharge)
(S) SP98E3 Safe Klens (ELC) Co2
(S) SP98E5 Contact Cleaner (NF) Co2
(360
o
)
100% PLASTIC SAFE
(P) #Z902 Electrosafe Co2
(Proprietary)
Weicon Compressed Air
HEAVY DUTY
(S) #7340 All 4 Co2
(360
O
)
AEROSOLS- ELECTRICAL CLEANERS
(Note: All products are Di-Electric i.e. 100% non conductive
except foam based)
NON FLAMMABLE
DRY COMPRESSED AIR
FOAM BASED
PLASTIC SAFE
RESIDUAL PROTECTIVE RESIDUELESS
LIGHTER THAN WATER
New
(P) #Z902 Electrosafe Co2
(Proprietary)
AEROSOLS- ELECTRONIC MAINTENANCE
RESIDUELESS CLEANERS
FLAMMABLE
100% Plastic safe low odor,
dielectric precision solvent.
(P) 8376 Electronic Component Cleaner Co2 (F)
(Ultra Safe)
(S) SP98E2 Safe Klens ELT Co2 (F)
(Economic)
NON FLAMMABLE
Plastic safe, low odor.
PROTECTION- CLEAR
ACRYLIC COATING
(P) #6004 Kleer Kote
(S) SP98E8 Plastikote
(E) Superon Plastikote
NOTE:
(P):- Premium Series
(S):- Superior Series
(E):- Economy Series
OTHER TECHNOLOGIES - FIRE STOP PRODUCTS OTHER TECHNOLOGIES - FIRE STOP PRODUCTS
FLAMMADUR MW FIRESTOP SYSTEM FLAMMADUR MW FIRESTOP SYSTEM
Flammadur A150 Properties
Applications
Mineral Wool density: 150 kg/m3 = 0.15 g/cm3 = 9.2 pcf
Melting point; = 1000 C (1832 F)
Board Dimensions: 1.2m x 60cm x 6cm (47.2 x 23.6 x 2.36),
for an opening area of 0.72m2 (7.75ft2), with 4boards/box.
Max. opening, wall W x H = 1.2mx1m (47.2 inch x 39.3 inch)
Max. opening, floor W x L = 1 m (3.9 inch) x unlimited
Fire Rating of F = 2 hrs, T = 0, 1, 2 hour expected in testing by
UL (Fire tested in Germany according to DIN standards, etc. To
be tested for UL approval)
In concrete walls and floors and in drywall and masonry walls
with the following penetrants:
Cables (individual or grouped) power, control, data,
communication, fiber optic
Cable trays, or racks (aluminum, steel, plastic)
Pipes
Ducts