The stability of the power system is not affected by: a) generator reactance b) line reactance c) excitation of the generator d) line losses e) None of the above 5. The transfer of power between two stations is maximum when the phase angle displacement between the voltages of the two stations is a) Zero b) 90 o c) 120 o d) 180.
The stability of the power system is not affected by: a) generator reactance b) line reactance c) excitation of the generator d) line losses e) None of the above 5. The transfer of power between two stations is maximum when the phase angle displacement between the voltages of the two stations is a) Zero b) 90 o c) 120 o d) 180.
The stability of the power system is not affected by: a) generator reactance b) line reactance c) excitation of the generator d) line losses e) None of the above 5. The transfer of power between two stations is maximum when the phase angle displacement between the voltages of the two stations is a) Zero b) 90 o c) 120 o d) 180.
1. Steady state stability of the power system is improved by a) Reducing the fault clearance time b) Using the double circuit line instead of single circuit line c) single pole switching d) decreasing generator inertia 2. Equal area criteria gives the information regarding a) Stability region b) Absolute Stability c) Relative Stability d) Swing Curves 3. Which one of the following is true a) Steady State Stability limit is greater than Transient Stability limit b) Steady State Stability limit is equal to Transient Stability limit c) Steady State Stability limit is lee than Transient Stability limit d) None of the above 4. The stability of the power system is not affected by: a) Generator reactance b) Line reactance c) Excitation of the generator d) Line losses 5. For stability and economic reason we operate the transmission line with power angle in the range of: a) 10 o to 25 o
b) 30 o to 45 o
c) 60 o to 75 o
d) 65 o to 80 o
6. The steady state stability of the power system can be improved by: a) Using machines of high impedance b) Connecting transmission line in series c) Connecting transmission in parallel d) Reducing the excitation of the machines 7. The transfer of power between two stations is maximum when the phase angle displacement between the voltages of the two stations is a) Zero b) 90 o
c) 120 o
d) 180 8. The inertia of two group of machines which swing together are M1 and M2. The inertia constant of the system is: a) M1-M2 b) M1+M2 c) M1M2/(M1+M2) d) M1/M2 9. The equal area criteria of stability is used for: a) no load on the busbar b) One machine and infinite busbar c) More than one machine and infinite busbar d) None of the above 10. If the torque angle of the alternator increases indefinitely the system will show: a) Steady state stability limit b) Transient state stability limit c) Instability d) None of the above 11. The transient stability limit of the power system can be increased by introducing: a) Series Inductance b) Shunt Inductance c) Series Capacitance d) Shunt Capacitance 12. he use of high speed breakers can: a) Increase the transient stability b) Decrease the transient stability c) Increase the steady state stability d) Decrease the steady state stability 13. The inertia constant of the two machines which are not swinging together are M1 and M2. The equivalent inertia constant of the system is: a) M1-M2 b) M1+M2 c) M1M2/(M1+M2) d) M1M2/(M1-M2) 14. f a generator of 250MVA rating has an inertia constant of 6MJ/MVA, its inertia constant on a 100MVA base is: a) 15 MJ/MVA b) 10.5 MJ/MVA c) 6 MJ/MVA d) 2,4 MJ/MVA 15. A 100 MVA, 11kV, 3 phase, 50Hz, 8 pole synchronous generator has a inertia constant H = 4 seconds. The stored in the rotor of the generator at synchronous speed will be [Gate 1997] (a)100MJ (b)400 MJ (c)800MJ (d) 12.5MJ 16. A 500MW, 21kV, 50Hz, 3-phase, 2-pole synchronous generator having a rated p.f. =0.9, has a moment of inertia of 27.5 x 10 3 kg-m 2 . The inertia constant (H) will be (a) 2.44 s (b) 2.71s (c) 4.88s (d) 5.42S 17.A cylindrical rotor generator delivers 0.5 pu power in the steady-state to an infinite bus through a transmission line of reactance 0.5 pu. The generator no-load voltage is 1.5 pu and the infinite voltage is 1.5 pu. The inertia constant of the generator is 5MW -s /MV and the generator reactance is 1 pu.The critical clearing angle, in degrees, for a three-phase dead short circuit fault at the generator terminal is (a) 53.5 (b) 60.2 (c) 70.8 (d) 79.6