You are on page 1of 1

Product Data

Product Data
Product Data Sheet
HEMPEL
HEMPELS GLASS BEADS 97770
Description: HEMPEL'S GLASS BEADS 97770 are retro-reflective glass beads with low index of
refraction.
They contain minimum 90% true spheres and conform to Ministry of Communications
(MOC) specifications for drop-on beads (patterned on AASHTO M247 Type 1).
The beads are high quality Ballotini Type Glass Beads which are surface treated for
water repellence, being lead-free glass and water clear.
Recommended use: For light reflecting traffic paint, HEMPELS GLASS BEADS 97770 should evenly be
sprinkled on to the wet traffic paint at a rate of approximately 400-500 grams per
square meter.
Availability: Not included in Group Assortment. Local availability subject to confirmation.
PHYSICAL CONSTANTS:
Specific gravity: 2.5 kg/litre - 20.9 lbs/US gallon
Refractive index: 1.5
Sieve analysis/
Size distribution:
US Sieve No./Size % Passing
12 100
30 85-100
40 45-100
50 10-45
80 0-20
200 0-5
Note: HEMPELS GLASS BEADS 97770 is for professional use only.
Safety: Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY: HEMPEL PAINTS (SAUDI ARABIA) W.L.L. - 97770001
1/1
Issued: January 2005 Page 1 of 1
This Product Data Sheet supersedes those previously issued. For definition and scope, see explanatory notes to
applicable Product Data Sheets.
Data, specifications, directions and recommendations given in this data sheet represent only test results or experience
obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under
the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or
User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF
SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and
Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in
said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of
the Products as recommended above, on the overleaf or otherwise.
Product data are subject to change without notice and become void five years from the date of issue.

You might also like