You are on page 1of 3

Eq. 2.

2
Area burnt Mass of fuel available
for combustion
3
A
M
B
Sector Agriculture, Forestry and Other Land Use
Category Emissions from Biomass Burning in Wetlands (Land Converted to Wetlands)
Category code 3C1d
Sheet 1 of 1
Equation Equation 2.27
Land-use category
Subcategories for
reporting year
2
Initial land use
1
Land use during
reporting year
(ha) (tonnes ha
-1
)
[non-WL] WL
(a)
(b)
Subtotal
1
Similar tables should be completed separately for each initial land use, and subtotals must be added up. If data by initial land use are not available, use only "non-WL" in this column.
2
Subcategories are created by vegetation type within strata ( (a), (b), (c) etc.) within the country. For each subcategory, use separate lines for each non-CO
2
greenhouse gas.
3
Where data for M
B
and C
f
are not available, a default value for the amount of fuel actually burnt (M
B
* C
f
) can be used (Table 2.4). In this case, M
B
takes the value taken from the table, whereas C
f
must be 1.
Combustion factor
3
CH
4
emissions from
fire
CO emissions from
fire
L
fire
-CH
4
= L
fire
-CO =
A * M
B
* C
f
* G
ef
* 10
-3
A * M
B
* C
f
* G
ef
* 10
-3
C
f
L
fire
-CH
4
L
fire
-CO
CH
4
CO
N
2
O
NO
x
CH
4
CO
N
2
O
NO
x
Agriculture, Forestry and Other Land Use
Emissions from Biomass Burning in Wetlands (Land Converted to Wetlands)
3C1d
1 of 1
Equation 2.27
Emission factor for each GHG
(-)
Table 2.6 Table 2.5
[g GHG
(kg dm burnt)
-1
]
(tonnes CH
4
) (tonnes CO)
G
ef
1
Similar tables should be completed separately for each initial land use, and subtotals must be added up. If data by initial land use are not available, use only "non-WL" in this column.
2
Subcategories are created by vegetation type within strata ( (a), (b), (c) etc.) within the country. For each subcategory, use separate lines for each non-CO
2
greenhouse gas.
3
Where data for M
B
and C
f
are not available, a default value for the amount of fuel actually burnt (M
B
* C
f
) can be used (Table 2.4). In this case, M
B
takes the value taken from the table, whereas C
f
must be 1.
CH
4
CO
N
2
O
NO
x
N
2
O emissions from
fire
NO
x
emissions from
fire
L
fire
-N
2
O = L
fire
-NO
x
=
A * M
B
* C
f
* G
ef
* 10
-3
A * M
B
* C
f
* G
ef
* 10
-3
L
fire
-N
2
O L
fire
-NO
x
Agriculture, Forestry and Other Land Use
Emissions from Biomass Burning in Wetlands (Land Converted to Wetlands)
3C1d
1 of 1
Equation 2.27
(tonnes N
2
O) (tonnes NO
x
)
1
Similar tables should be completed separately for each initial land use, and subtotals must be added up. If data by initial land use are not available, use only "non-WL" in this column.
2
Subcategories are created by vegetation type within strata ( (a), (b), (c) etc.) within the country. For each subcategory, use separate lines for each non-CO
2
greenhouse gas.
3
Where data for M
B
and C
f
are not available, a default value for the amount of fuel actually burnt (M
B
* C
f
) can be used (Table 2.4). In this case, M
B
takes the value taken from the table, whereas C
f
must be 1.

You might also like