This document provides information on types of lighting equipment used for airport runways and landing areas, including:
1. High and low intensity runway lights that indicate the area for landing and takeoff, mounted along the edges and ends of runways.
2. Threshold lights used in conjunction with runway lights to indicate the usable runway limits, mounted across the ends of runways.
3. Boundary lights that outline the limits of the landing area, mounted around the perimeter.
4. Range lights can indicate a preferred landing path using multiple lights across the ends of the path.
This document provides information on types of lighting equipment used for airport runways and landing areas, including:
1. High and low intensity runway lights that indicate the area for landing and takeoff, mounted along the edges and ends of runways.
2. Threshold lights used in conjunction with runway lights to indicate the usable runway limits, mounted across the ends of runways.
3. Boundary lights that outline the limits of the landing area, mounted around the perimeter.
4. Range lights can indicate a preferred landing path using multiple lights across the ends of the path.
This document provides information on types of lighting equipment used for airport runways and landing areas, including:
1. High and low intensity runway lights that indicate the area for landing and takeoff, mounted along the edges and ends of runways.
2. Threshold lights used in conjunction with runway lights to indicate the usable runway limits, mounted across the ends of runways.
3. Boundary lights that outline the limits of the landing area, mounted around the perimeter.
4. Range lights can indicate a preferred landing path using multiple lights across the ends of the path.
TYPE OF EQUIP- MENT AND USE LOCATION TYPE OF LAMP (Incandescent Filament) COLOR INDICATION MOUNTING SPAC- ING Runway light (high 10 ft outside run- 200-Watt, 6.6-am- White on full Mounted on 200 ft intensity) . way edge paral- pere, PS-30bulb, length of ground or on a Used on all in- lel to the run- mogul prefocus runway ex- low base with strument runways way, opposite base; 250-watt, cept one- breakable joint to indicate limits each other and 20-ampere, T-10 half white which will give of area available so circuited that bulb, medium and one-half way if light is for landing and a single runway prefocus base; yellow struck accident- take-off. may be delin- or500-watt, 115- within 1,500 ally by an air- eated as a unit volt, T-20 bulb, ft of each plane. Maxi- medium prefo- end of run- mum extension cus base way 30 in. above sur- face Threshold light (high Across each end of 200-Watt, 6.6-am- Green Mounted on (See lo- intensity) runway along pere PS-30 bulb, ground or on a cation) Used in conjunc- line perpendicu- mogul prefocus low base with a tion with and in lar to runway base; 250-watt, breakable joint same circuit as center fine, sym- 20-ampere, T-10 which will give high-intensity metrically bulb, medium way if light is runway light to spaced in two prefocus base; accidentally indicate usable groups, one or500-watt, 115- struck by an air- limits of runway group on each volt, T-20 bulb, plane. Maxi- side of runway, medium prefo- mum extension leaving an 80-ft cus base 30 in. above sur- clearance gap at face runway center t Runway light (low Along both edges 40- Watt, 115-volt, White on full Mounted semi- 200 ft intensity). of runway pav- A-21 bulb, me- length of flush with pave- Used on runways ing, opposite dium prefocus runway ex- ment, heavy to indicate area each other and base; or 325-lu- cept one-half prismatic glass available for land- so circuited that men, 6.6-ampere, white and and steel cover. ing and take-off. a single runway A-21 bulb, me- one-half yel- Maximum ex- may be deline- dium prefocus low within tension 4 in. ated as a unit base. 1,500 ft of each end of runway above surface Threshold light (low Across each end of 100- Watt, 115-volt, Green Mounted semi- (See lo- intensity) runway along a A-21 bulb, me- flush with pave- cation) Used in conjunc- line perpendicu- dium prefocus ment, heavy tion with and in lar to runway base; or 1,020- prismatic glass same circuit as center line and lumen, 6.6-am- and steel cover. low-intensity run- at uniformly pere, A-21 bulb, Maximum exten- way light to indi- spaced intervals mediumprefocus sion 4 in. above cate usable limits of 50 ft. On base surface of runway runways less than 150 ft wide spacing should be decreased to allow a total of four to be used Around boundary 40-Watt, 115-volt, White Normally on 300 ft Boundary light of landing area A-21 bulb, me- boundary cones Used to outline and so circuited dium prefocus limits of landing that entire land- base; or 325-lu- area ing area is de- lineated as a unit men, 6.6-ampere, A-21 bulb, me- dium prefocus base Across each end of 100-Watt, 115-volt, Green Normally on Range light preferred land- A-21 bulb, me- cones. Landing 50 ft Used on an all- ing path in dium prefocus paths are coded Apart way field to indi- boundary light base; or 1,020- by using two, cate a preferred circuits lumen, 6.6-am- three, or more landing path pere, A-21 bulb, medium prefo- cus base lights across each end of same pre- ferred landing path