#ork on $nix platform %es & is it possi'le to increase the si(e of plane 'oundar) representation ho#+ %ed. #ork 'ench 4o 7 8hich is the tool used to exit from sketcher #ork #ench to part desi0n #ork --exit sketcher 9 8hat are default units for :;T ; ; ') ') #ork
#ork on $nix platform %es & is it possi'le to increase the si(e of plane 'oundar) representation ho#+ %ed. #ork 'ench 4o 7 8hich is the tool used to exit from sketcher #ork #ench to part desi0n #ork --exit sketcher 9 8hat are default units for :;T ; ; ') ') #ork
#ork on $nix platform %es & is it possi'le to increase the si(e of plane 'oundar) representation ho#+ %ed. #ork 'ench 4o 7 8hich is the tool used to exit from sketcher #ork #ench to part desi0n #ork --exit sketcher 9 8hat are default units for :;T ; ; ') ') #ork
Interactive Application 2 Save extension of sketcher . CATPart Does CATIA!" #ork on $nix platform %es & Is it possi'le to increase the si(e of plane 'oundar) representation * ho#+ %es, Tools-.ptions-Infrastructure-Part structure-Displa) " Difference 'et#een ne# file and ne# from file////. If )ou save an existin0 file in another director) #ithout chan0in0 the file name, )ou #ill onl) 'e a'le to open one of these files at an) 0iven time. If one of them is alread) open )ou #ill not 'e a'le to open the other. This is 'ecause 'oth files have same $$ID. To avoid this happenin0 each file must have it1s o#n $$ID. This can 'e done ') means of the 2ile34e# from... To create a ne# document #hose 'asic characteristics are same as an existin0 document .To do this close document )ou #ant to cop) if not alread) closed * select 2ile34e# from... After selectin0 the existin0 document from #hich )ou #ant to create a ne# one * click open. An exact cop) of existin0 document is displa)ed #ith a default name. The onl) difference '5# this document and alread) existin0 one is that the ne# document is 0iven a ne# $$ID ') 2ile ---ne# from... 6 Is it possi'le to directl) enter in to sketcher #ork 'ench 4o 7 8hich is the tool used to exit from sketcher #ork 'ench to part desi0n #ork 'ench Exit sketcher 9 8hat are default units for :;T ;m, k0, sec < 8hat is use of construction elements Construction elements aims at helpin0 u in sketchin0 the re=uired profile 1> 8hat is S?ETC@ T..:S in sketcher #ork 'ench and explain the importance of it+ S?ETC@ T..:S in sketcher #ork'ench are the commands, #hich find their ver) use in creatin0 sketches. S?ETC@ T..:S are namel) Aeometric * Dimensional Constraints, Construction elements and Arid option. The) pla) a ver) important in sketchin0, #henever #e #ant to constrain a role sketch #e use these options and if #e #ant to convert an) entit) into a construction element once a0ain these come into action. 11 Difference 'et#een 0eometrical and dimensional constraints+ Aeometric constraints is relationship that forces a limitation '5# one or more 0eometric elements. Dimensional constraint is a constraint, #hose value determines the 0eometric o'Bect measurement. 12 8hat is S@.85@IDE mode Sho# mode ena'le us to see all the components presentl) opened and in @ide mode #e can hide the desired elements from the vie# for time 'ein0. 1 Is it possi'le to hide specification tree %es, #ith help of 2 1& 8hat is use of Cut Part C) Sketch Plane This task sho#s ho# to make some ed0es visi'le. In other #ords, #e are 0oin0 to simplif) the sketch plane ') hidin0 the portion of the material that is not needed for sketchin0. 1" @o# do )ou measure arc len0th+ 8e can measure an arc len0th ') the help of ;EAS$DE ITE; command. some times #e need to customi(e the option for arc len0th if it is not checked earlier usin0 customi(ation in ;EAS$DE ITE; command. 16 8hat is meanin0 of true dimension 17 8hat )ou mean ') IS.-Constraints If all of the de0rees of freedom of 0eometr) have 'een taken up ') a consistent com'ination of dimensions and fixed 0eometr), that 0eometr) is said to 'e IS.- C.4STDAI4ED. Aeometr) that still has some de0rees of freedom is said to 'e $4DED C.4STDAI4ED. 19 ;ention the color code for IS. Econstrained, under, and over constrained elements Areen, #hite, purple colors respectivel) 1< Difference 'et#een stacked dimension and chained dimension mode #hile usin0 auto constraint option In stacked dimension all the dimensions #ill 'e measured #.r.t the reference. In chained dimension the dimensions #ill 'e measured one #.r.t other . 2> 8hat for Animated constraint command is used This task sho#s ho# constrained sketched element reacts #hen #e decide to make one constraint var). 21 @o# man) dimensions are re=uired to constrain the ellipse Three 22 8hat are different conic sections Ellipse, @)per'ola, Para'ola 2 8hat is rho value for ellipse, para'ola, h)per'ola Ellipse has D@. value of Para'ola has D@. value of @)per'ola has D@. value of 2& 8hat is splineF did )ou use it in )our studies+ 2" 8hat is pol)nomial de0ree of curves in !& and !" Three 26 @o# the spline is represented in 27 8hat is 4$DCS 29 @o# man) t)pes co-ordinate s)stems are there Three 2< Difference 'et#een trim and =uick trim In trim option #e can extend a line alon0 #ith trimmin0 of other un#anted elements. In =uick trim > 8hat is proBect D silhouette ed0es ProBect D silhouette ed0es in sketcher #ill sho#s ho# to create silhouette ed0es to 'e used in as 0eometr) or reference elements. 1 8hat is use of sketch anal)sis To check #hether the sketch is full) closed such that sketch can 'e used for further operations in part desi0n . 2 8here do #e use axis Shaft Difference 'et#een axis and construction elements Axis is visi'le in part desi0n mode & Can #e redefine sketches %es " Can axis 'e converted in to line or vice versa %es 6 @o# man) axis can 'e created in a sin0le sketch As man) as )ou #ant 7 @o# do #e chan0e sketch1s reference plane 9 8hat do mirror command does in sketch ;irror command in sketch #ill create a cop) of the sketch a'out a reference plane. < If I don1t #ant the relation 'et#een ori0inal and mirror elements #hat should I do Explode it &> 8hat is use of isolate in sketcher #ork'ench Isolate is used #hen d 0eometr) is proBected onto a sketch in order to 'e modified and used as part of the sketch1s profile &1 Can #e select non planer surface as sketch plane 4o &2 8hat are different options availa'le in =uick trim, 'reak and ru''er in, 'reak and ru''er out, 'reak and keep Creak and ru''er in removes part of the element, #hich is clicked. Creak and ru''er out removes part of the element, #hich is not clicked. Creak and keep keeps 'oth part of elements after 'reakin0. & 8hat is meant ') CATIA P1, P2, P P1, P2, P indicate the different t)pes of platforms && 8hat is the ?ernell of CATIA C 4EGT &" Is it possi'le to directl) enter the part desi0n #hen #e start the CATIA instead of assem'l) desi0n %ES @.8+ &6 &7 8hat are all the earlier names 0iven to CATIA+ &9 8hat is the 'asis for CAD soft#ares1 classification+ &< 8hat is kernel+ The kernel is the 'asic indispensa'le part of an operatin0 s)stem that allocates resources, such as lo#-level hard#are interfaces and securit). "> @o# man) de0rees of freedom are there for points * lines, circles and ellipse in t#o dimensions+ De0rees of freedom for points * lines is 2,for circles it is 3 and for ellipses it is 5 in t#o dimension. "1 8hat is meanin0 of mean dimension+ "2 H 8hat is the difference 'et#een spine and spline+ I1J. SpineK Creates a curve passin0 throe1 point on a plane * normal to one or more other planes. I2J. SplineK Creates a curve passin0 throe1 several points havin0 tan0ential Curvature continuit). " H @o# man) t)pes of environment are availa'le to start CATIA I1J. 2rom desktop LmotifM I2J. 2rom console LdtermM "& 8hat is the use of 2.D;T..: function+ "" 8hat is hlr and nhr+ 8hat is their purpose+ @lrNhidden line removal 4hrNno hidden line removal Their purpose is to visuali(e the solids in different modes "6 8hat is the difference 'et#een IS.:ATE * SEPADATE+ IS.:ATEK Deletes lo0ical link 'et#een the elements SEPADATEK Separates lines, curves * faces from their links #ith other elements. EGK - A curve is considered as separate #hen it is linked to onl) one surface. "7 8hat is the difference '5# PADA;ETDIC S.:IDK- Delational model is PADA;ETDIC S.:ID * 4.4- PADA;ETDIC S.:ID+ parametric. i.e., one to one relation. If an) chan0e in dimension that ma) reflects on other dimensions. 4.4PADA;ETDIC S.:IDK- Developin0 a solid ') usin0 surface, face, solid primitives etc.,there is no one to one relation. "9 8hat is ;aster 85S and Detail 85S+ Each model can have one ;aster 8orkspace , in #hich area the model is created and manipulated. A model can have (ero or more #orkspaces called detail #orkspaces.These are auxillar) #orkspaces that contain elements that are to 'e duplicated to several locations in the ;aster #orkspace. In addition, Detail #orkspace can also 'e or0anised into separate li'rar) files usin0 the :ICDAD% 2$4CTI.4.These can 'e shared #ith man) models to allo# or0anisational standardi(ation. "< 6> PART DESIGN 1 Expand CAD5CA;5CAE5P:;5PD;5!P;5 !PD;5C2D Computer Aided IDesi0n5;anufacturin05En0ineerin0J, Product :ife c)cle ;ana0ement, Product Data ;ana0ement, !irtual Product ;odule, ------------------------------ 2 Is it possi'le to create pocket or 0roove as first feature %es @o# to 0ive tolerance to particular dimension 2irst, 0ive the dimension and usin0 ri0ht click select ADD T.:EDA4CE from the contextual menu and specif) the tolerance. & " 8hat is use of create datum Deactivates the link '5# parts 6 Can )ou pad open and intersectin0 profile Possi'le for open profile #ith thin pad option .4ot possi'le #ith intersectin0 profile. 7 Difference 'et#een PAD and ;$:TI PAD A PAD is used for sin0le profile and ;$:TIPAD is used for multi profile sketch. 9 Can I take portion of the one sketch for creatin0 pad %es, usin0 the ;$:TIPAD option .D usin0 simple PAD and in simple PAD select A. T. PD.2I:E option. < 8hat is DDA2TED 2I::ETTED P.C?ET It performs draftin0, filletin0 * pocket simultaneousl) 1> Can #e use arc as axis for creatin0 shaft feature OOO%es+ 11 8hat is difference 'et#een from top and from side option in stiffener In stiffener from side, extrusion is performed in the profile1s plane and thickness is added normal to profile1s plane and vice versa 12 8hat kind of profile should 'e there for creatin0 stiffener 8e can use #ireframe 0eometr) or su'elements of a sketch. Profile ma) 'e open or closed 'ut condition Is that closed profile Ps extrusion must 'e normal to sketch. 1 Can I 0ive t#o different an0les for same face of solid ') usin0 draft option 4o, it is not possi'le to 0ive t#o different an0les for a sin0le face of a solid usin0 DDA2T 'ut it is possi'le if #e use AD!A4CED DDA2T. 1& 8hat is power copy A set of features that are 0rouped under to use in different context and havin0 the capa'ilit) to adapt chan0es #hen pasted. 1" 8hat is user feature creation Creates h)'rid feature, intended to 'e stored in catalo0s and instantiated later on. 16 8hat is difference 'et#een create desi0n ta'le from current parameters and from existin0 file 1J reate desi!n ta"#e $rom current parameter %a#uesK &Check this option #hen )ou #ant to create a desi0n ta'le from a su'set of the document parameters. %ou Bust have to select amon0 all the document parameter values. 2J reate desi!n ta"#e $rom pre&e'istin! $i#e( &Check this option #henever )ou #ant to create a desi0n ta'le from the values of an external file. 17 8hat is the use of the option PDuplicate data in CATIA model1 in desi0n ta'le+ Check this 'ox #henever )ou intend to reuse )our document on an operatin0 s)stem different from the one, #hich is used to create the desi0n ta'le. 19 Is it possi'le to add some more parameters to existin0 desi0n ta'le %es, #e can add parameters to the existin0 desi0n ta'le #ith the help of ASS.CIATE option 1< Difference 'et#een P.8ED C.P% * $2C Parameters can 'e edited in po#er cop) #hich is not possi'le in $2C 2> Difference 'et#een PASTE * PASTE SPECIA: PASTE option in contextual menu ena'le us to simpl) cop) and paste one feature from one location to the other 'ut PASTE SPECIA: option let us to maintain the link 'et#een the pasted feature and the ori0inal one .An) chan0es made to the ori0inal feature #ill 'e seen in the copied one if #e #ant and #e have li'ert) to delink the ori0inal and copied feature. 21 Different option in PASTE SPECIA: As result, As specified in part document, As result #ith link 22 Is it possi'le to create ne0ative 'od) %es, usin0 I4SEDT menu and I4SEDT C.D% option. 2 @o# do )ou differentiate positive and ne0ative 'od) A positive 'od) is the one #hich #hen assem'led #ith another 'od) it 0ets added and ne0ative 'od) is the one #hich #hen ASSE;C:ED #ith a positive 'od) #ill 0et su'tracted and it #ill 0et added if C..:EA4 .PEDATI.4, ADD is used instead of ASSE;C:E. 2& Difference 'et#een assem'le and add, remove In ASSE;C:E the nature of the 'odies to 'e assem'led are taken into account. It means, if a ne0ative 'od) is assem'led #ith a positive 'od) it 0ets su'tracted. Cut if #e use ADD command for the same t#o 'odies then the) #ill 0et added irrespective of their nature IQve or -veJ.DE;.!E command is same as that of the ADD and thus it #ill not respect the nature of the 'odies.
2" 8hat is use of DE;.!E :$;P Demovin0 of material that is not ph)sicall) connected to an) 'od). 26 8hat is Deframe on and center 0raph Rooms on particular o'Bect selected, proBects it to the center of the screen 27 8hat is use of Deorder+ The capa'ilit) of DE.DDED command allo#s us to rectif) desi0n mistakes ') reorderin0 operations in. 29 8hat is use of P$::I4A DIDECTI.4 in Di' option It s#eeps the profile #ith respect to a specified direction. To select this direction select a plane or an ed0e. 2< @o# do I create a plane at an an0le to another plane $sin0 the option An0le54ormal to plane in P:A4E command. > 8hat are different t)pes of couplin0 modes are there in loft Datio, !ertices, Tan0enc) Dicontinuit), Curvature then tan0enc) Discontinuit) 1 8hat is si0nificance of simplified representation in PATTED4 8ith this #e can make an) o'Bect invisi'le 2 @o# I can place the instances on 'oth sides of ori0inal feature $sin0 Do#1 * Do#2 options Is it possi'le to pattern the t#o or more feature1s at a time %es I') multi selectin0 the features and then selectin0 the pattern. & 8hat is meanin0 of explode in pattern Deactivatin0 the link '5# patterns and makes them as independent entities. " 8hat are the ne0ative modelin0 concepts+ 6 8hat are all the limitations of $ser 2eature Creation I$2CJ as compared #ith the Po#er Cop)+ 1J In $2C datums cannot 'e used as inputs of the features. 2J Su'-elements cannot 'e used as the inputs of user features. ExK -The face of a pad cannot 'e used as input. J 8hen creatin0 a user feature, it is not possi'le to edit Iadd5removeJ inputs after leavin0 the DE2I4ITI.4 dialo0 ta'. Click the CA4CE: 'utton and create the ne# user feature creation. 7 9 H.8hich is the 'etter to split the solidK - aJ surface 'J plane cJ face+ Plane is the 'est option to split the solid. < Is it possi'le to split usin0 the SE8 operation+ %ES &> 8hat is a 2$4CTI.4A: S$D2ACE+ A 2$4CTI.4A: S$D2ACE is the element that defines the face on a solid. &1 8hat is I$A and its purpose+ I$ANInteractive $ser Application Its purpose is to customi(e the CATIA user command. &2 8hat is the difference '5# solid modelin0 and solid editin0+ & 8hat is the difference '5# Affinit) and Scalin0+ Scalin0K Desi(in0 the 'od) to the scale #hich )ou specif), in all the directions e=uall). Affinit)K Desi(in0 the 'od) to the scale #hich )ou specif) in a particular direction onl), specified ') )ou. && 8hat is use of ;EDAE E4D function+ S;EDAE E4DT option #hen checked .4 #ill trim the extrusion to the existin0 material. &" &6 8hat is the use of :A8 function+ The usa0e of la# function involves the creation of 0eometr) to control the differin0 aspects of a surface. &7 8hat are TDA4S:AT.DS, explain+ &9 8hat are solid primitives+ &< 8hat is the use of ADU$ST command+ "> 8hat are the differences '5# solid and #ire-frame modelin0+ SURFACE DESIGN 1 8hat is thickness of surface Infinitel) less 2 8hat is h)'rid modelin0 ;ixture of solid and surface modelin0 Is it possi'le to set the default colour for surface %es & 8hat is class A surfaceOOO " :ist the different commands availa'le to create surface Extrusion, revolve, s#eep,fill and multi section. 6 Difference 'et#een Boin and heel Uoins the surfaces, trim the un#anted proBections on the surface 7 8hat is use federation option does in Boin command The purpose of federation is to re0roup several elements makin0 up Boined surface or curve. This is especiall) useful #hen modif)in0 linked 0eometr) to avoid respecif)in0 all the input elements. 9 8hat is default value for distance o'Bective in Boin command >.>>1 mm < @o# does the option Nearest in proBect command #ill affect+ It #ill sho# it1s si0nificance #hen there are more than one profile in a sin0le sketch and if #e #ant to proBect all of them on a surface then #e have to c)ec* it o$$+ ot)erwise the onl) profile, #hich is nearer to the surface, #ill 0et proBected and others don1t. 1> H.8hat is the difference 'et#een face, * surface+ I1J. 2aces are infinitel) thin elements that represent the 'ounded exterior definition. .f a part. 2aces can 'e planar or 'uilt on existin0 surfaces. I2J. Skin is infinitel) thin elements that are incorporate or 0roup a series of faces to0ether to completel) define a feature of part. 11 H Is it possi'le to do shell operation on sphere+
%es 12 8hat is healin0 of 0eometr)+ This task sho#s ho# to heal surfaces,that is,ho# to fill an) Isli0htJ0ap that ma) 'e appealin0 'et#een t#o surfaces. 1 8hat is distance o'Bective Iin healin0J + It is the maximum 0ap allo#ed 'et#een t#o healed elements 1& 8hat is P2ree(e elements P in healin0+ If this option is checked , the selected elements under Pfree(e elements1 #ill not 0et affected ') the healin0 operation. 1" 8hat is smoothin0 of curves+ This task sho#s ho# to smooth a curve,i.e., fill the 0aps and smooth the tan0enc) and curvature discontinuities,in order to 0enerate 'etter =ualit) 0eometr) #hen usin0 this curve to create other elements, such as s#ept surfaces for example. 16 8hat is P;aximum deviation1 in smoothin0 curves command+ ;aximum deviation is the allo#ed deviation 'et#een the initial curve and smoothed curve. 17 8hat is PTopolo0) simplification1 in smoothin0 curves command + If this option is checked then it automaticall) deletes the vertices on the curves #hen the curve is curvature continuous at these vertices,thus reducin0 its num'er of se0ments. 19 1< 2> ASSEMBLY DESIGN WORK BENCH 1 8hat is difference 'et#een product and component+ Product is a collection of components, #hereas component is a collection of features 2 8hat is save extension of assem'l) file+ . CATProduct 8hat is save mana0ement+ It saves all the modified files under different folders and files simultaneousl) & 8hat is visuali(ation mode+ In this mode, onl) partial data is loaded to the memor) of the hard disk " 8hat is desi0n mode+ In this mode the data is full) loaded to the memor) 6 8hen #e use propa0ate director)+ In save mana0ement, #hen #e #ant save the component files in the same file in #hich product is saved then #e use PD.PAAATE DIDECT.D%. Then automaticall) all the child files #ill 'e propa0ated to this particular director). 7 8hat is scene +#here #e use it 0ive an) one example Scenes ena'le capturin0 and restorin0 the state of components in an assem'l) in a saved vie#point. 9 8hat is difference 'et#een coincidence #ith same option and contact constraint Coincide t)pe constraint are used to ali0n Elements. Dependin0 upon selected elements )ou ma) o'tain C.4CE4TDICIT%, C.AGIA:IT%, .D C.P:A4ADIT%. To create coincidence constraint '5# axis s)stems, the) must have the same direction and same orientation in product. Contact t)pe constraint can 'e created '5# t#o planar faces Idirected planesJ The common area '5# t#o planar faces can 'e plane Iplane contactJ, a line Iline contactJ or a point Ipoint contactJ. < @o# man) de0rees of freedom #ill 'e there for a component in assem'l) SIG 1> In an assem'l) ho# do I measure de0ree of freedom for a component+ Activate the component and then 0o for A4A:%RE 11 8hat is use of stop manipulated on clash command+ It #ill stop the movement of component #hen clashed 12 8hat is the function of Po%er#oad properties1 in contextual menu+ It 0ives a#a) us the option not to cop) a particular component into the draftin0 from assem'l) ') Bust selectin0 itIthe particular componentJ usin0 the contextual menu #ith Po%er#oad properties1 1 H.8hat is the difference 'et#een parametric and nonparametric modelin0+ I1J. Delational model is parametric. I.e., one to one relation. If an) chan0e in dimension that ma) reflects on other dimensions. I2J. Developin0 a solid ') usin0 surface, face, solid primitives etc., There is no one to one relation. 1& 8hat is DES? command+ This command sho#s us ho# to vie# the relationship '5# different documents and to o'tain information a'out their properties. Iuncheck Tools-options0eneralloud reference documentsJ various document t)pes 8@ITEloaded C:AC?not loaded in the current session DEDnot 'een found. 1" Different t)pes of CAC@E :.CA: CAC@EA read or #rite director) located locall) on )our machine and used to store CAD files. The first time a component is inserted it is tessellated. This means that the correspondin0 CAD file is computed and saved in the local cache as #ell as displa)ed in the document #indo#. The next time this component is re=uired, the CAD file #hich alread) exists Iand not the ori0inal documentJis automaticall) loaded from the local CAC@E.the user is normall) responsi'le for the local cache. DE:EASED CAC@EA read onl) cache that can 'e located an)#here on )our net#ork,several directories can 'e defined for released CAC@E. If a CAD file can not 'e found in the local CAC@E, the soft#ere 'rouse the released cache directories in their listed order to see if the CAD file is located in one of them.If the CAD file is still not found, the component is tesseleted and the resultin0 CAD file is saved in the local CAC@E.the site adminstrator is normall)responci'le for the released CAC@E. The default maximam CAC@E si(e is ">>;C.8hen the maximam si(e is exceeded, the automatic deletion of CAD files Ion first in.5first out 'asisJis tri00ered. 16 A'out EDIT :I4?S This task sho#s ho# to displa) the document links. .nl) direct links i.e. external documents directl) pointed to ') the active document can 'e displa)ed usin0 the Edit:inks.. Command.this activated inactive document must 'e activate 'efore displa)in0 their links. 4ote that )ou can also select an element from the 0raph to displa) its links.
17 8hat is CSA tree+ CSANCatia Solid Aeometr) It is e=uivalent specification tree in !& ADMINISTRATION OF CATIA V5 1 @o# do I come to kno# #hich release of catiav" @E:P EA'out CATIA !" 2 8hat is si0nificance of CAT Settin0s 8hat is different mode licenses availa'le & 8hat is the purpose of I$A+ I$AK Interactive user application, used to customi(e the CATIA user command " 8hat are CATIA sessions+ 6 8hat does CSA tree explain+ 7 8hat are ;$:TI ;.DE: :I4?S+ The ;ulti ;odel :inks are functioned in automatic updatin0 of the chan0es made onto the part 'od).This can 'e achieved ') to00lin0 .4 the icon ?EEP :I4? 8IT@ SE:ECTED .CUECTS in Tools3.ptions.