You are on page 1of 40

HOUSEHOLD

INDUSTRIAL &
INSTITUTIONAL
CLEANING
Formulation Guide
ispcleaning.com
In the fast-paced world of household, industrial and institutional cleaning
products, your customers are constantly expecting something better.
More efective performance
Unique delivery systems
Lower cost in use
At ISP, we have created a broad portfolio of specialty ingredients that
addresses a wide range of formulating challenges and can help you capitalize on
trends in the market.
Contents
Household cleaning formulations 3 - 24
Handsoap formulations 24 - 25
Laundry formulations 26 - 30
Dishwashing formulations 30 - 36
Industrial & Institutional cleaning formulations 36 - 38
2
Pages
Application Reference number Title
Hard surface cleaners 11022-64-1 Hard surface cleaner featuring Surfadone LP-100 & LP-300
11364-58-A8 Hard surface cleaner with ISP MicroBeads 20279
11364-136-16 Hard surface cleaner with Setleze 3000
11539-68-25 Hard surface cleaner with Triclosan ISP MicroCapsules 4448
11539-73-27 Hard surface cleaner with Tea Tree Oil ISP MicroCapsules 4371
11040-104-1 Multipurpose alkaline degreaser
11678-41-2 Concentrated all-purpose cleaner
11678-76-6 Plastic surface cleaner
Kitchen 11040-89-1 Kitchen cleaning wipes
11040-105-1 Kitchen disinfectant cleaner
11539-59-33 Kitchen gel cleaner
11678-13-22 Kitchen cream cleaner
Bathroom 11040-93-1 Bathroom cleaner (formula #1)
11539-26-32 Bathroom gel cleaner
11678-7-33 Bathroom cream cleaner
11678-69-19 Opaque toilet bowl cleaner ,chlorine based
11678-71-60 Acidic toilet bowl cleaner featuring Sorez HS-205
Wood 11363-152-43 Wooden surface cleaner
11364-62-B13 Wooden surface cleaner with ISP MicroBeads 20277
11539-66-25 Wooden surface polish and cleaner
Glass 11040-92-1 Glass cleaning wipes
11539-125-185 Anti-misting glass cleaner
11678-40-10 Anti-static screen cleaner featuring Ceraphyl R 60 and 65
Ceramic 11364-18-8 Ceramic tile cleaner
11364-72-F4 Ceramic tile cleaner with ISP MicroBeads 20277
Stainless steel 11364-145-10 Stainless steel cleaner
11539-118-25 Stainless steel gel cleaner
Carpet/foor 11040-77-1 Carpet cleaner
11040-81-1 Machine carpet cleaner
11678-29-11 Carpet spot cleaner
11040-76-2 Floor polish
Misc. 11539-63-14 Abrasive cleaner
11678-16-36 Power cream all purpose cleaner
11040-80-1 Air freshener (formula #1)
Household cleaning formulations
Formulations Index
3
Hand soap formulations
Application Reference number Title
Hand soap 11040-61-1 Liquid hand soap
11539-130-9 Paper soap
11364-61-C6 Hand gel cleaner with ISP MicroBeads 20279
Laundry formulations
Application Reference number Title
Detergent 11040-64-1 Liquid laundry detergent (clear & non-builder)
11364-31-9 Color safe liquid laundry detergent
Softener 11040-69 Fabric softener, 3 formulations
Pre-treatment 11363-25-39 Laundry pre-spotter
ISPM-18.06.2010-1 Stain remover featuring Sorez 100
Protection 11126-67-1 Protective spray
Packaging 11178-142-1 Water soluble flm
11178-142-2 Water soluble flm with delayed solubility
11178-142-3 Water soluble fexible flm
Dishwashing formulations
Application Reference number Title
Detergent 11040-96-1 Washing up liquid featuring Surfadone LP-300 (formula #1)
11040-97-1 Washing up liquid featuring Surfadone LP-300 (formula #2)
11040-98-1 Ecological washing up liquid
11364-71-D13 Washing up liquid with ISP MicroBeads 20278 (formula #1)
11364-72-E4 Washing up liquid with ISP MicroBeads 20278 (formula #2)
11364-79-10 Washing up liquid featuring Surfadone LP-100
11539-72-22 Washing up liquid with ISP MicroCapsules 4449
Tablets 11040-100-1 Dishwasher detergent tablets
Industrial & Institutional cleaner formulations
Application Reference number Title
Car 11678-10-26 Car shampoo
11678-10-17 Car wash & wax
11678-9-12 Tire wax
11539-152-7 Wheel spray cleaner
Metal 11040-74-1 Metal cleaner
4
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 60.480
Sodium lauryl sulphate (dodecyl sulphate, sodium salt 70%) 20.000 Sigma Aldrich
Coconut diethanolamide (Cafon Cd) 10.000 Ellis & Everard
Ethylene glycol monobutyl ether 5.000 Aldrich
Surfadone LP-300 1.500 ISP
Surfadone LP-100 1.500 ISP
Tetrasodium EDTA (Nervanaid BA4) 1.000 Aston Chemicals
Integra 44 0.500 ISP
Dye 0.010
Perfume/fragrance 0.010
Total 100.000
Hard surface cleaner featuring Surfadone LP-100 & LP-300
11022-64-1
Formulation Instructions
1. Mix all ingredients until uniform.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 93.850
Jaypol TTA 2.000 ISP
C9-11 Alcohol/8EO (Synperonic 91/8) 2.900 Uniqema
Easy-Wet 20 0.600 ISP
Integra 44 0.160 ISP
Dye 0.200
Polysorbate 80 0.017 A & E Connock Ltd
Perfume/fragrance 0.008
Sodium hydroxide (NaOH 50 % aq. solution) 0.160
ISP MicroBeads 20279 0.100 ISP
Total 100.000
Hard surface cleaner with ISP MicroBeads 20279
11364-58-A8
1. Add Jaypol TTA to water while mixing and neutralize with sodium hydroxide solution (50%).
2. Add Synperonic 91/8, Easy-Wet20 and dye solution (1%).
3. Premix Polysorbate 80 & fragrance then add into formulation.
4. Add Integra 44 and ISP MicroBeads 20279 with slow, gentle mixing.
Formulation instructions
Formulations
5
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 94.865
Sodium laureth sulphate (70%) (Texapon N70) 1.000 Cognis
C9-11 Alcohol/8EO (Synperonic 91/8) 1.000 Uniqema
Cocoamide diethanol amide (Purton CFD) 0.500 Zschimmer & Schwarz
C12-C18 Alcohol/7EO (Dehydol LT 7) 0.500 Cognis
Integra 44 0.400 ISP
Sodium tripolyphosphate 0.400 Fisher
Soda ash 0.400 Fisher
Hydroxyethylcellulose (Cellosize QP 30000H) 0.385 Dow
Surfadone LP-100 0.300 ISP
Setleze 3000 0.200 ISP
Polysorbate 80 0.020 A & E Connock Ltd.
Dye 0.020
Perfume/fragrance 0.010
Total 100.000
Hard surface cleaner with Setleze 3000
11364-136-16
1. Add Cellosize HEC QP-30000-H in to water and mix very well until it dissolves.
2. Add Soda ash and Sodium tri polyphosphate.
3. Add Synperonic 91/8, Texapon N70, Dehydol LT7, Purton CFD, Surfadone LP-100 and dye solution (1%).
4. Add the fragrance in the Polysorbate and add to the mixture.
5. Add Setleze 3000 and Integra 44.
Formulation instructions
6
1. Add the Keltrol-T to the water and mix until it dissolves.
2. Add Protelan LS9011, Texapon N70, Surfadone LP1-00, NaCl and dye solution (0.5%) in this order.
3. Premix fragrance with Polysorbate 80.
4. Add fragrance mix and Integra 44.
5. Add the ISP MicroCapsules and mix gently.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 90.255
Xanthan gum (Keltrol T) 0.650 CP Kelco
Sodium lauryl ether sulphate 70% (Texapon N70) 5.000 Cognis
Sodium lauroyl sarcosinate (Protelan LS9011) 2.250 Zschimmer & Schwarz
Sodium chloride (NaCl solid) 0.800 Fisher
Surfadone LP-100 0.500 ISP
Integra 44 0.400 ISP
ISP MicroCapsules 4448 0.100 ISP
Dye 0.020
Polysorbate 80 0.017 A & E Connock Ltd.
Perfume/fragrance 0.008
Total 100.000
Hard surface cleaner with Triclosan ISP MicroCapsules 4448
11539-68-25
Formulation instructions
7
1. Prepare 2% gel by adding Stabileze QM to water and heating to 80C until it dissolves and forms gel.
2. Add 18 g from gel Stabileze QM and Neutralize with NaOH, 50%.
3. Add Texapon N70, Surfadone LP-100, Ceraphyl 60 and dye solution (0.5%) in order.
4. Dissolve the fragrance in the Polysorbate 80 and add to the mixture.
5. Add Integra 44.
6. Add the ISP MicroCapsules and mixed sensitively.
Formulation instructions
1. Charge water into the vessel.
2. Add caustic soda, followed by LABSA, stir until all neutralized.
3. Add tetrapotassium pyrophosphate, Eltesol SX pellet and stir until dissolved.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 85.330
Tetrapotassium pyrophosphate (28%) 5.000 Albright and Wilson
Sodium xylene sulphonate (Eltesol SX Pellets) 4.500
NEP Solvent 2.000 ISP
LABSA (linear alkyl benzene sulphonic acid) 1.500 Cognis
Surfadone LP-300 1.000 ISP
Sodium hydroxide 50% 0.500 Fisher
Integra 44 0.150 ISP
Perfume/fragrance 0.010
Dye 0.010
Total 100.000
Multipurpose alkaline degreaser
11040-104-1
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 76.650
Stabileze QM (2% aq. solution) 18.000 ISP
Sodium hydroxide (NaOH 50% solution) 0.260 Fisher
Sodium lauryl ether sulphate (70%) (Texapon N70) 2.500 Cognis
Surfadone LP-100 0.560 ISP
Ceraphyl 60 0.500 ISP
Integra 44 0.400 ISP
ISP MicroCapsules 4371 1.000 ISP
Dye 0.100
Polysorbate 80 0.017 A & E Connock Ltd.
Perfume/fragrance 0.008
Total 100.000
Hard surface cleaner with Tea Tree Oil ISP MicroCapsules 4371
11539-73-27
4. Add Surfadone LP-300, stir until all dissolved.
5. Add the remaining ingredients and stir well
until homogeneous.
8
1. Add ingredients respectively in to the water. While adding, make sure each one dissolves completely.
2. Adjust pH with citric acid around 7.00.
3. Premix fragrance with Polysorbate 80.
4. Add fragrance mixture and Integra 44 to the formulation.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 70.220
Lauryl dimethyl amine oxide (Amphotenside DMOX) 5.000 Zschimmer & Schwarz
Sodium lauryl ether sulphate 70% (Texapon N70) 13.000 Cognis
Sodium lauryl sarcosinate (Protelan LS 9011 ) 8.000 Zschimmer & Schwarz
Surfadone LP-100 1.200 ISP
Sodium chloride (NaCl solid) 1.000 Local Supplier
Integra 44 1.000 ISP
Perfume/fragrance 0.100
Polysorbate 80 0.480 A&E Connock Ltd.
Total 100.000
Concentrated all purpose cleaner
11678-41-2
Formulation instructions
1. Add ingredients in order shown. While adding, make sure each one dissolves completely.
2. Mix fragrance with Polysorbate 80.
3. Add fragrance mix and then add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 94.810
C9-11 Alcohol/8EO (Synperonic 91/8) 3.500 Uniqema
NEP (solvent) 1.000 ISP
Perfume/fragrance 0.030
Polysorbate 80 0.060 A&E Connock Ltd.
Surfadone LP-100 0.200 ISP
Integra 44 0.400 ISP
Total 100.000
Plastic surface cleaner
11678- 76-6
Formulation instructions
9
1. Add the ingredients in the order listed, stirring thoroughly after each addition.
2. Apply to wipe substrate in a 1:1 weight ratio.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 91.650
NEP Solvent 2.000 ISP
Isopropyl alcohol (Isopropanol) 2.000 Fisher Scientifc
Sodium cocoyl glutamate (Amisoft CS-11) 1.500 Ajinomoto
Surfadone LP-100 1.500 ISP
Sodium hydroxide (10% Aqueous) 1.180 Fisher Scientifc
Integra 44 0.150 ISP
Perfume/fragrance 0.020
Total 100.000
Kitchen cleaning wipes
11040-89-1
Formulation instructions
1. Charge water into the vessel.
2. Add tetrapotassium pyrophosphate and EDTA, stir until all dissolved.
3. Add Empigen BAC 80, stir until homogeneous.
4. Add Surfadone LP-100, stir until dissolved.
5. Add dye and fragrance.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 93.280
Tetrapotassium pyrophosphate (28%) 3.000 Albright and Wilson
Benzalkonium chloride (80%) (Empigen BAC80) 2.000 Huntsman
Surfadone LP-100 1.500 ISP
EDTA 38% (EDTA ) 0.200 Fisher
Perfume/Fragrance 0.010
Dye 0.010
Total 100.000
Kitchen disinfectant cleaner
11040-105-1
Formulation instructions
10
1. Add Jaypol AT4 into the water and neutralize with NaOH (50%).
2. Mix until a clear solution is obtained.
3. Add Sodium Hypochlorite, Stepanate SXS 40, NEP and dye solution (1%).
4. Premix Polysorbate 20 and fragrance then add into formulation. Adjust to desired pH with the NaOH.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I Water) 69.390
Jaypol AT4 3.000 ISP
Sodium hydroxide (NaCl 50% aq. solution) 2.400 Fisher
Sodium hypochlorite (14% NaOCl active chlorine) 17.500 Fisher
Sodium xylene sulfonate 40% (Stepanate SXS 40) 5.000 Stepan
NEP Solvent 1.000 ISP
Polysorbate 20 0.760 A E Connock Ltd.
Dye 0.150
Perfume/fragrance 0.100
Total 100.000
Kitchen gel cleaner
11539-59-33
Formulation instructions
1. Add NEP, Surfadone LP-100, Protelan LS 9011, Plantacare 818, Antara 430 and NaOH into water.
2. Premix Polysorbate 80 & fragrance then add into formulation.
3. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 93.721
NEP Solvent 2.000 ISP
Coco-glycoside (Plantacare 818) 1.330 Cognis
Sodium lauryl sarcosinate (Protelan LS9011) 1.300 Zschimmer & Schwarz
Antara 430 0.830 ISP
Surfadone LP-100 0.400 ISP
Integra 44 0.200 ISP
Sodium hydroxide (NaOH 50% aq. solution) 0.150 Fisher
Polysorbate 80 0.046 A & E Connock Ltd.
Perfume/fragrance 0.023
Total 100.000
Kitchen cream cleaner
11678-13-22
Formulation instructions
11
1. Charge the mixing vessel with the water and commence stirring.
2. Add the remaining ingredients with stirring in the order given above.
Formulation
Ingredients % W/W Supplier
A. Aqua/water (D.I. Water) 89.580
Glycolic acid 65% 3.000 Aldrich
Lauryl dimethyl amine oxide (30%) 2.000 Zschimmer & Schwarz
Acetic acid (Glacial) 1.500 Fisher Scientifc
Alkyl dimethyl benzyl ammonium
chloride (50%) (Empigen BAC 50)
1.400 Huntsman
B. Surfadone LP-100 2.500 ISP
Perfume 0.010
Dye 0.010
Total 100.000
Bathroom cleaner (formula #1)
11040-93-1
Formulation Instructions
1. Put Rapifoc into water wait to dissolve and swell.
2. Add citric acid and lactic acid in to water.
3. Add sodium lauryl ether sulphate, Synperonic 91/8, NEP, Easy-Wet 20 and dye solution (1%) respectively.
4. Premix Polysorbate 80 and fragrance then add into formulation.
5. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 81.340
C12-C14 / 30 EO Na sulfate (Disponil FES 77) 7.000 Cognis
NEP Solvent 4.000 ISP
Citric acid (solid) 4.000 Fisher
Easy-Wet 20 1.000 ISP
Lactic acid (Purac 88) 0.580 Purac
Rapifoc 0.500 ISP
Integra 44 0.400 ISP
Dye 0.180
Polysorbate 80 0.067 A & E Connock Ltd.
Perfume/fragrance 0.033
Total 100.000
Bathroom gel cleaner
11539-26-32
Formulation instructions
12
1. Add citric acid and lactic acid into water.
2. Add Synperonic 91/8, Styleze W-20, Easy-Wet 20 and Antara 430, respectively.
While adding, make sure each one dissolves completely.
3. Premix Polysorbate 80 & fragrance then add into formulation.
4. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 91.267
Citric acid (solid) 4.000 Fisher
C9-11 alcohol/8EO (Synperonic 91/8) 1.210 Uniqema
Antara 430 1.000 ISP
Styleze W-20 1.000 ISP
Lactic acid 0.520 Fisher Scientifc
Easy-Wet 20 0.500 ISP
Integra 44 0.400 ISP
Polysorbate 80 0.070 A & E Connock Ltd.
Perfume/fragrance 0.033
Total 100.000
Bathroom cream cleaner
11678-7-33
Formulation instructions
1. Add Jaypol AT4 to water and mix. After mixing neutralize with NaOH.
2. All ingredients are put respectively. While adding, make sure each one dissolves completely.
3. Mix fragrance with Polysorbate 80.
4. Add fragrance mixture to the formulation and Antara 430.
Formulation Instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 66.550
Jaypol AT4 5.000 ISP
NaOH (50% aq. solution) 0.600 Local Supplier
Sodium hypochloride (14% active chlorine) 15.000 Local Supplier
Sodium xylene sulphonate (Stepanate SXS 40) 5.000 Stepan
Sodium lauryl sarcosinate (Protelan LS 9011 ) 1.500 Zschimmer& Schwarz
Lauryl dimethyl amine oxide (Amphotenside DMOX) 4.500 Zschimmer& Schwarz
Easy-Wet 20 0.200 ISP
NEP (solvent) 1.000 ISP
Perfume/fragrance 0.050
Polysorbate 80 0.100 A&E Connock Ltd.
Antara 430 0.500 ISP
Total 100.000
Opaque toilet bowl cleaner, chlorine based
11678- 69-19
13
1. Add Rapifoc to water and mix until it dissolves.
2. All ingredients are added respectively. While adding, make sure each one dissolves completely.
3. Mix fragrance with Polysorbate 80.
4. Add fragrance and dye solution (1%) mixture.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 84.300
Rapifoc 0.570 ISP
Sorez HS-205 1.000 ISP
Citric acid (solid) 4.000 Local Supplier
Lactic acid (Purac 88) 0.520 Purac
Sodium lauryl ether sulphate 70% (Texapon N70) 7.000 Cognis
C9-11 Alcohol/8EO (Synperonic 91/8) 1.000 Uniqema
NEP (solvent) 1.000 ISP
Dye 0.040
Polysorbate 80 0.060 A&E Connock Ltd.
Perfume/fragrance 0.030
Integra 44 0.400 ISP
Total 100.000
Acidic toilet bowl cleaner featuring Sorez HS-205
11678- 71-60
Formulation instructions
14
1. Solve PVP K-90 in water.
2. Add Jaypol AT4.
3. Neutralize with KOH.
4. Add IPA, Flerogum K38, Surfadone LP-100, lauryl dimethyl amine oxide, sodium lauryl sulphate (prepared 25%
solution) and dye solution (1%), respectively.
5. Premix Polysorbate 80 & fragrance then add into formulation.
6. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 72.050
Jaypol AT4 2.250 ISP
Potassium cocoate (Flerogum K38) 13.000 Zschimmer & Schwarz
Sodium lauryl sulphate (25% aq. solution) (Texapon K 12 P) 6.200 Cognis
Lauryl dimethyl amine oxide (Amphotenside DMOX) 4.500 Zschimmer & Schwarz
Isopropanol (IPA) 0.520 Fisher Scientifc
Surfadone LP-100 0.500 ISP
Integra 44 0.400 ISP
Dye 0.400
Potassium hydroxide (KOH 50% aq. solution) 0.350 Fisher
PVP K-90 0.200 ISP
Polysorbate 80 0.017 A & E Connock Ltd
Perfume/fragrance 0.008
Total 100.000
Wooden surface cleaner
11363-152-43
Formulation instructions
15
1. Add Keltrol-T to water and mix for 20 minutes until dissolves.
2. Add Flerogum K38, Surfadone LP-100, lauryl dimethyl amine oxide, sodium lauryl sulphate and dye solution
(1%) respectively.
3. Premix Polysorbate 80 & fragrance then add into formulation.
4. Add Integra 44 and ISP MicroBeads 20277 with slow gentle mixing.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 73.750
Potassium cocoate (Flerogum K38) 13.000 Zschimmer & Schwarz
Lauryl dimethyl amine oxide 4.500 Zschimmer & Schwarz
Xanthan gum (Keltrol T) 1.000 CP Kelco
ISP MicroBeads 20277 0.400 ISP
Integra 44 0.400 ISP
Dye 0.400
Polysorbate 80 0.017 A & E Connock Ltd
Perfume/fragrance 0.008
Sodium lauryl sulphate (25%) (Texapon K12P) 6.200 Cognis
Surfadone LP-100 0.500 ISP
Total 100.000
Wooden surface cleaner with ISP MicroBeads 20277
11364-62-B13
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 79.700
PVP/VA W-735 9.000 ISP
C9-11 Alcohol/8EO (Synperonic 918) 5.000 Uniqema
JaypolAT4 2.000 ISP
Wax emulsion (Poligen WE-1) 1.000 BASF
Easy-Wet 20 1.000 ISP
Tributoxy ethyl phosphate (Amgard TBEP) 1.000 Stepan
Antara 430 0.750 ISP
Integra 44 0.400 ISP
Sodium hydroxide (NaOH 50% aq. solution) 0.120 Fisher
Polysorbate 80 0.020 A & E Connock Ltd.
Perfume/fragrance 0.010
Total 100.000
Wooden surface polish and cleaner
11539-66-25
1. Add Jaypol AT4 in to water.
2. Then neutralize with NaOH and mix to obtain clear solution.
3. Add PVP/VA W 735, Antara 430, TBEP, Easy-Wet 20,
Formulation instructions
Synperonic 91/8, Poligen WE-1, respectively.
4. Premix Polysorbate & fragrance then add into formulation.
5. Add Integra 44.
16
1. Add the ingredients in the order listed, stirring thoroughly after each addition.
2. Spray onto wipes and package in air-tight containers.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 89.700
Isopropyl alcohol (Isopropanol) 9.000 Fisher
Dipropylene glycol methyl ether (Dowanol DPM) 1.000 Dow
Surfadone LP-100 0.150 ISP
Integra 44 0.150 ISP
Total 100.000
Glass cleaning wipes
11040-92-1
Formulation instructions
1. Add Easy-Wet 20, sodium lauryl ether sulphate, Gantrez S-97 BF solution (as supplied), ammonium hydroxide
and dye solution (1%) into water. During addition ensure that each one dissolves completely.
2. Premix Polysorbate 80 & fragrance then add into formulation.
3. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 95.350
Gantrez 97 BF solution (as supplied) 0.500 ISP
Isopropanol (IPA) 5.000 As required
Sodium lauryl ether sulphate 70% paste (Texapon N70) 1.000 Cognis
Integra 44 0.400 ISP
Ammonium hydroxide (28%) 0.300 Fisher
Polysorbate 80 0.250 A & E Connock Ltd.
Easy-Wet 20 0.130 ISP
Perfume/fragrance 0.050 As Required
Dye 0.020
Total 100.000
Anti-misting glass cleaner
11539-125-185
Formulation instructions
17
1. Add ingredients respectively. Make sure ingredient dissolves before adding following one.
2. Add Integra 44 to the formulation.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 96.600
Ceraphyl 60 1.200 ISP
Ceraphyl 65 0.600 ISP
C 9-11 alcohol / 8EO (Synperonic 91/8) 0.500 Uniqema
NEP Solvent 1.000 ISP
Integra 44 0.100 ISP
Total 100.000
Anti-static screen cleaner featuring Ceraphyl
11678- 40-10
Formulation instructions
1. Dissolve the Gantrez AN-169 BF in water by heating at 50C in water. Cool down to room temperature
(add evaporated water).
2. Neutralize with KOH.
3. Add NEP, Flerogum K38, Surfadone LP-100, lauryl dimethyl amine oxide, Synperonic 91/8
and dye solution (1,0%) respectively.
4. Premix Polysorbate 80 & fragrance then add into formulation.
5. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 77.325
Potassium cocoate (Flerogum K38) 13.000 Zschimmer & Schwarz
Lauryl dimethyl amine oxide (Amphotenside DMOX) 4.500 Zschimmer & Schwarz
C9-11 Alcohol/8EO (Synperonic 91/8) 1.280 Uniqema
Surfadone LP-100 1.000 ISP
NEP (solvent) 0.520 ISP
Dye 0.500
Potassium hydroxide (KOH 50% aq. solution) 0.500 Fisher
Gantrez AN-169 BF (powder) 0.500 ISP
Integra 44 0.400 ISP
Polysorbate 80 0.375 A & E Connock Ltd.
Perfume/fragrance 0.100
Total 100.000
Ceramic tile cleaner
11364-18-8
Formulation instructions
18
1. Add Keltrol-T to water and mix until dissolves.
2. Add Flerogum K38, Surfadone LP-100, lauryl dimethyl amine oxide, NEP, Synperonic 91/8 and
dye solution (0,5%) respectively.
3. Premix Polysorbate 80 & fragrance then add into formulation.
4. Add Integra 44 and ISP MicroBeads 20277 with slow gentle mixing.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 76.815
Potassium cocoate (Flerogum K38) 13.000 Zschimmer & Schwarz
Lauryl dimethyl amine oxide (Amphotenside DMOX) 4.500 Zschimmer & Schwarz
C9-11 Alcohol/8EO (Synperonic 918) 2.280 Uniqema
Surfadone LP-100 1.000 ISP
Xanthan gum (Keltrol T) 1.000 CP Kelco
NEP Solvent 0.500 ISP
ISP MicroBeads 20277 0.400 ISP
Integra 44 0.400 ISP
Dye 0.008
Polysorbate 80 0.017 A & E Connock Ltd.
Perfume/fragrance 0.008
Total 100.000
Ceramic tile cleaner with ISP MicroBeads 20277
11364-72-F4
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 83.475
PEG 12 dimethicone (SF-1288) 5.000 Bayer
NEP Solvent 4.000 ISP
Citric acid (solid) 3.700 Fisher
Sodium lauryl ether sulphate 70% (Texapon N70) 1.500 Cognis
C12-C18 Alcohol/ 7EO (Dehydol LT 7) 1.000 Cognis
Surfadone LP-100 0.500 ISP
Integra 44 0.400 ISP
Phosphoric acid (80%) 0.400 Fisher
Polysorbate 80 0.017 A & E Connock Ltd.
Perfume/fragrance 0.008
Total 100.000
Stainless steel cleaner
11364-145-10
1. Add citric acid and phosphoric acid into the water.
2. Add NEP, sodium lauryl ether sulphate, Dehydol LT 7, Surfadone LP-100 and SF 1288 respectively.
3. Premix Polysorbate 80 & fragrance then add into formulation.
4. Add Integra 44.
Formulation instructions
19
1. Put Keltrol into water to dissolve and swell.
2. Add citric acid and phosphoric acid into water.
3. Add NEP, sodium lauryl ether sulphate, Dehydol LT 7, Surfadone LP-100 and SF 1288, respectively.
4. Premix Polysorbate 80 & fragrance then add into formulation.
5. Add Integra 44.
6. Add grey glitter to the formulation and stir.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 82.730
PEG 12 Dimethicone (SF-1288) 5.000 Bayer
NEP Solvent 4.000 ISP
Citric acid (solid) 3.700 Fisher
Sodium lauryl ether sulphate 70% (Texapon N70) 1.500 Cognis
C12-C18 alcohol / 7EO (Dehydol LT 7) 1.000 Cognis
Xanthan gum (Keltrol T) 0.655 CP Kelco
Surfadone LP-100 0.500 ISP
Integra 44 0.400 ISP
Phosphoric acid (80%) 0.400 Fisher
Glitter 0.080
Nanyang Lingbao Pearl Pigment
Co., Ltd.
Polysorbate 80 0.010 A & E Connock Ltd.
Perfume/fragrance 0.020
Total 100.000
Stainless steel gel cleaner
11539-118-25
Formulation instructions
1. Dissolve sodium lauryl sulphate in water.
2. Add the Cocamide DEA, isopropyl alcohol and Surfadone LP-100.
3. Add Integra 44, dye and fragrance, mix until homogenous.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 76.830
Isopropyl alcohol (Isopropanol) 10.000 Fisher Scientifc
Sodium lauryl sulphate (dodecyl sulphate, sodium salt 70%) 10.000 Sigma Aldrich
Cocamide DEA (Purton CFD) 2.000 Zschimmer & Schwarz
Surfadone LP-100 1.000 ISP
Integra 44 0.150 ISP
Perfume/fragrance 0.010
Dye 0.010
Total 100.000
Carpet cleaner
11040-77-1
Formulation instructions
20
1. Dissolve all solids in water.
2. Then add the remaining ingredients and mix until homogenous.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 76.320
Butyl carbitol 8.000 Dow
Tetrapotassium pyrophosphate (28%) 7.500 Albright and Wilson
Eltesol SX 40 6.500 Huntsman
Surfadone LP-100 1.000 ISP
EDTA 38% (EDTA) 0.500 Fisher
Integra 44 0.150 ISP
Phosphoric acid (85%) pH 7 0.010
Perfume/fragrance 0.010
Dye 0.010
Total 100.000
Machine carpet cleaner
11040-81-1
Formulation instructions
1. Add ingredients respectively to water. During addition ensure that each one dissolves completely.
2. Premix fragrance with Polysorbate 80.
3. Add fragrance mixture to the formulation. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 95.303
NEP Solvent 4.000 ISP
Gantrez 97 BF solution (as supplied) 0.500 ISP
C12-C18 Alcohol /7EO (Dehydol LT 7) 0.600 Cognis
Integra 44 0.400 ISP
Polysorbate 80 0.077 A & E Connock Ltd.
Perfume/fragrance 0.033
Total 100.000
Carpet spot cleaner
11678-29-11
Formulation instructions
21
1. Mix chemicals in the following order: Water, Surfactant FC-120, Surfadone LP-300, Wacker SRE, Dipropylene glycol
methyl ether, NEP, Dibutyl phthalate, Tributoxy ethyl phosphate and Integra 44. Agitate for a few minutes.
2. Slowly add Primal B-924 with constant stirring and continue to stir for 30 minutes.
3. Slowly add Primal E-1531 with constant stirring and continue to stir for 10 minutes.
4. Slowly add Poligen WE-1 with constant stirring and continue to stir for 1 hour.
5. Stand for a day before use.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 42.060
Primal B924 (Primal B-924) 37.310 Rohm & Haas
Wax emulsion (Poligen WE-1) 7.590 BASF
Primal E-1531 5.920 Rohm & Haas
Dipropylene glycol methyl ether (Dowanol DPM) 3.340 Dow
NEP Solvent 1.200 ISP
Tributoxy ethyl phosphate 1.130 Aldrich
Dibutyl phthalate 1.130 Aldrich
Integra 44 0.150 ISP
Wacker SRE (Polydimethylsiloxane) 0.100 Wacker
Surfactant FC-120 0.040 3M
Surfadone LP-300 0.030 ISP
Total 100.000
Floor polish
11040-76-2
Formulation instructions
22
1. Add Carbopol ETD to water and mix until dissolves. Neutralize with NaOH.
2. Mix to obtain clear solution. Add ammonium hydroxide.
3. Add calcium carbonate and mix.
4. Add Disponil LBDS 25, Dehydol LT 7, Easy-Wet 20 respectively.
5. Premix Polysorbate 80 & fragrance then add into formulation.
6. Add Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 44.570
Calcium Carbonate (CACO3 Omyacarb 40 GZ) 50.000 Omya UK
C12-C18 EO (Dehydol LT 7) 2.000 Cognis
Lauryl alkyl benzene sulphonate (Disponil LDBS-25) 2.000 Cognis
Crosslinked polyacrylic acid polymer/ rheology modifer
(Carbopol ETD 2623)
0.300 Noveon
Easy- Wet20 0.500 ISP
Integra 44 0.400 ISP
Ammonium hydroxide (28%) 0.130 Fisher
Polysorbate 80 0.200 A & E Connock Ltd
Sodium hydroxide (NaOH 50% aq. solution) 0.250 Fisher
Perfume /fragrance 0.100
Total 100.000
Abrasive cleaner
11539-63-14
Formulation instructions
1. Add sodium hypochlorite, sodium xylene sulphonate, Protelan LS 9011, NEP and Easy-Wet 20 in to water.
During addition ensure each one dissolves completely.
2. Premix Polysorbate 80 & fragrance then add into formulation.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 76.440
Sodium hypochlorite (14% active chlorine) 15.000 Fisher
Sodium xylene sulfonate (Stapanate SXS 40) 5.000 Aldrich
Sodium lauryl sarcosinate (Protelan LS9011) 1.500 Zschimmer & Schwarz
NEP Solvent 1.000 ISP
Polysorbate 80 0.650 A & E Connock Ltd.
Perfume/fragrance 0.100
Easy-Wet 20 0.220 ISP
Total 100.000
Power cream all-purpose cleaner
11678-16-36
Formulation Instructions
23
1. Add isopropyl alcohol, and Surfadone LP-300 to the lemon fragrance.
2. Add water, followed by dye and Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 92.740
Isopropyl alcohol (Isopropanol) 5.000 Fisher Scientifc
Perfume/fragrance lemon 2.000
Integra 44 0.150 ISP
Surfadone LP-300 0.100 ISP
Dye 0.010
Total 100.000
Air freshener (formula #1)
11040-80-1
Formulation instructions
1. Dissolve sodium lauryl ether sulphate, Surfadone LP-300 and Empigen BB in water.
2. Add NaCl and adjust pH to 6.5~7.0 with citric acid or caustic soda.
3. Add Integra 44, dye and fragrance.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 80.320
Sodium lauryl ether sulphate 70% paste (Zetesol 270 N) 15.000 Zschimmer & Schwarz
Alkyl dimetyl amine betaine (Empigen BB) 2.000 Huntsman
Sodium chloride 1.500 Fisher
Surfadone LP-300 1.000 ISP
Integra 44 0.150 ISP
Citric acid 0.010
Perfume/fragrance 0.010
Dye 0.010
Total 100.000
Liquid hand soap
11040-61-1
Formulation instructions
24
1. Add Aquazol 500 in to water and mix well until it dissolves completely.
2. Add sodium lauryl sulphate (prepared 25% solution), Ceraphyl 60 and dye solution (1%).
3. Premix Polysorbate 80 & fragrance and add into formulation.
4. Add Integra 44.
5. Then pour constant amount of solution into a mold. Put in an oven and keep it 100C
until all the water has evaporated.
6. Remove it from the mold.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 74.620
Sodium lauryl sulphate (25% aq. solution) (Texapon K 12 P) 20.580 Huntsman, Rhodia
Aquazol 500 5.000 ISP
Ceraphyl 60 1.000 ISP
Integra 44 0.400 ISP
Polysorbate 80 0.184 A&E Connock Ltd
Perfume/fragrance 0.036
Dye 0.020
Total 100.000
Paper soap
11539-130-9
Formulation instructions
1. Add Jaypol TTA to water and mix for 20 minutes at high speed at 80C.
2. After hydration, cool and add NaOH to neutralize.
3. Add sodium laureth sulphate, Ceraphyl 60 and prepared dye solution (1%) and mix.
4. Premix Polysorbate 80 & Perfume 2:1 add into formulation.
5. Add Integra 44 and ISP MicroBeads 20279 with slow, gentle mixing.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 93.400
Jaypol TTA 3.000 ISP
Sodium laureth sulphate (70%) (Texapon N70) 2.500 Cognis
Ceraphyl 60 0.500 ISP
Integra 44 0.160 ISP
Sodium hydroxide (NaOH 50% aq. solution) 0.210 Fisher
ISP MicroBeads 20279 0.100 ISP
Dye 0.100
Polysorbate 80 0.017 A&E Connock Ltd.
Perfume/fragrance 0.008
Total 100.000
Hand gel cleaner with ISP MicroBeads 20279
11364-61-C6
Formulation instructions
25
1. Dissolve Unisan SS5053 in water.
2. Add Tinopal CBS-X, soda ash and PVP K-30.
3. Add sodium lauryl ether sulphate, C911 Alcohol /8EO (Synperonic 91/8)
and Surfadone LP-100 and stir until all ingredients are dissolved.
4. Add Integra 44, dye and fragrance.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 53.700
Sodium alkyl benzene sulphonate 50% paste (Unisan SS5053) 25.600 Rhodia
Sodium lauryl ether sulphate 70% Paste (Zetosol 270 N) 15.000 Zschimmer & Schwarz
C911 Alcohol /8EO (Synperonic 91/8) 3.000 Uniqema
Soda ash 1.000 Fisher
Surfadone LP-100 1.000 ISP
PVP K-30 0.500 ISP
Integra 44 0.150 ISP
CI fuorescent brightener 35 (Tinopal CBS-X) 0.050 Ciba Geigy
Perfume/fragrance qs
Dye qs
Total 100.000
Liquid laundry detergent (clear and non-builder)
11040-64-1
Formulation Instructions
26
1. Dissolve the Genapol LA 050, Disponil LDBS25 and sodium lauryl ether sulphate in the water.
2. Add other ingredients respectively.
3. Prepare 0.5% solution with the dye and add to the mixture.
4. Dissolve the fragrance in Polysorbate 80 and add mix to the mixture.
5. Add Integra 44.
Formulation instructions
Formulation
Ingredients
% W/W
Supplier
A B C
Aqua/water (D.I.Water) 92.630 92.950 92.950
Adogen 442 ditallow dimethyl ammonium chloride 6.70 6.70 / Degussa
Surfadone LP-100 0.50 / / ISP
Integra 44 0.15 0.15 0.15 ISP
Perfume/fragrance 0.010 0.010 0.010
Dye 0.010 0.010 0.010
Arquad 2HT-75 ditallow dimethyl ammonium chloride / / 6.70 Akzo Nobel
Total 100.00 100.00 100.00 100.00
Fabric softener, 3 formulations A, B and C
11040-69
1. Warm Adogen or Arquad to 55C, then add
into water and stir well at 55C.
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 60.92
Sodium laureth sulphate (70%) (Texapon N70) 9.660 Cognis
Lauryl alkyl benzene sulphonate (Disponil LDBS-25) 6.040 Cognis
Trisodium citrate dihydrate 6.040 Fisher
Propylene glycol 3.620 Aldrich
Fatty alcohol polyglycol ether laureth 5 (Genapol LA-050) 3.620 Clariant
Alkyl polyglycol ether with 11 EO (Emulsogen LCN 118) 3.620 Clairant
Gantrez 97 BF solution (as supplied) 1.200 ISP
NEP Solvent 2.410 ISP
Easy-Wet 20 1.200 ISP
Chromabond S-403 E 0.600 ISP
Sorez100 0.600 ISP
Integra 44 0.400 ISP
Dye 0.040
Perfume/fragrance 0.006
Polysorbate 80 0.017 A & E Connock Ltd
Total 100.000
Color safe liquid laundry detergent
11364-31-9
2. Cool to 35C.
3. Add Surfadone LP-100, Integra 44, fragrance and dye.
27
1. Dissolve disodium EDTA in water.
2. After dissolving EDTA add Tergitol 15-S-7, citric acid, Sorez 100, Acusol 820, NEP and Easy-Wet20 respectively.
3. Neutralize with NaOH.
4. Dissolve the fragrance in Polysorbate 80 and add mix in to the mixture.
5. Add Integra 44.
Formulation instructions
1. Dissolve Dehydol LT in water at 30C.
2. Add Dehydol LS-54 and sodium lauryl ether sulphate (30%).
3. Prepare 0.5% solution with the dye and add to the mixture.
4. Add Sorez 100 (transparent) and then Integra 44.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 91.800
Dehydol LT (100% Fatty Alcohol 7 Moles EO) 4.500 Cognis
Dehypon LS-54 (100% Fatty Alcohol EO and 4 moles P07) 1.500 Cognis
Sodium lauryl ether sulphate (30%) 1.000
Sorez100 1.000 ISP
Integra 44 0.200 ISP
Total 100.000
Pre-treatment stain remover featuring Sorez 100
ISPM 18.06.2010-1
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 85.070
NEP Solvent 4.000 ISP
Secondary ethoxylated alcohol (Tergitol 15-S-7) 3.050 Dow
Jaypol AT4 2.000 ISP
Citric acid (solid) 2.000 Aldrich
Sodium hydroxide (NaOH 50% aq. solution) 2.250 Fisher
Easy-Wet 20 0.500 ISP
Sorez 100 0.500 ISP
Integra 44 0.400 ISP
Titriplex III (Disodium EDTA) 0.200 S. Black
Polysorbate 80 0.020 A & E Connock Ltd
Perfume/fragrance 0.010
Total 100.000
Laundry pre-spotter
11363-25-39
28
1. Heat the water to 60C.
2. Add the Aquazol 500 with high speed stirring.
3. Stir for 1 - 2.5 hours until all the Aquazol 500 has dissolved.
4. Leave to let the air disperse.
5. Cast a flm of the solution onto a non stick surface using a Meyer bar to give a dry flm of 100 -150 microns.
6. Dry for 5 minutes at 130C.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 72.000
Aquazol 500 28.000 ISP
Total 100.000
Water soluble flm
11178-142-1
Formulation instructions
1. Heat the water and the propylene glycol to 60C.
2. Add the Aquazol 500 with high speed stirring.
3. Stir for 1 - 2.5 hours until all the Aquazol 500 has dissolved.
4. Add the Styleze CC-10 and stir for 30 minutes.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 56.470
Aquazol 500 21.960 ISP
Styleze CC-10 19.610 ISP
Propylene glycol 1.960 Aldrich
Total 100.000
Water soluble flm with delayed solubility
11178-142-2
Formulation instructions
1. Mix the deionized water and ethanol together.
2. Under high sheer, add in the Aquazol 200 and mix for 1 hour.
3. Leave to stand overnight to fully dissolve.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 45.000
Alcohol denat. (Ethanol Absolute) 45.000 Fisher
Aquazol 200 10.000 ISP
Total 100.000
Protective spray
11126-67-1
Formulation instructions
5. Leave to let the air disperse.
6. Cast a flm of the solution onto a non stick surface using
a Meyer bar to give a dry flm of 100 - 150 microns.
7. Dry for 5 minutes at 130C.
29
1. Heat the water and the propylene glycol to 60C.
2. Add the Aquazol 500 with high speed stirring.
3. Stir for 1 - 2.5 hours until all the Aquazol 500 has dissolved.
4. Leave to let the air disperse.
5. Cast a flm of the solution onto a non stick surface using a Meyer bar to give a dry flm of 100 - 150 microns.
6. Dry for 5 minutes at 130C.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 69.840
Aquazol 500 27.160 ISP
Propylene glycol 3.000 Aldrich
Total 100.000
Water soluble fexible flm
11178-142-3
Formulation instructions
1. Add sodium hydroxide to water.
2. Add alkyl benzene sulphonic acid, stir until neutralized.
3. Add sodium lauryl ether sulphate, coco-diethanol amide and Surfadone LP-300, and stir until
all ingredients are dissolved.
4. Add Integra 44, dye, lemon and citric acid.
5. Add sodium chloride.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 78.280
Alkyl benzene sulphonic acid (LABSA) 9.800 Huntsman, Rhodia
Sodium lauryl ether sulphate 70% Paste 5.800 Huntsman, Rhodia
Sodium hydroxide 50% 2.550 Fisher
Surfadone LP- 300 1.000 ISP
Cocamide DEA (Coco/Diethanol amide) 1.000 Aldrich
Sodium chloride 0.400 Fisher
Integra 44 0.150 ISP
Citric acid (10% aqueous solution) 1.000 Fisher
Perfume/fragrance 0.010
Dye 0.010
Total 100.000
Washing up liquid featuring Surfadone LP-300 (formula #1)
11040-96-1
Formulation instructions
30
1. Charge the water into the vessel.
2. Add the sodium lauryl ether sulphate 70% paste, stir with mechanical stirrer until dissolved.
3. Add coconut diethanolamine and Surfadone LP-300, stir until dissolved.
4. Add Integra 44, dye and fragrance, stir until homogeneous.
5. Add Sodium chloride.
6. Adjust pH to 6.8~7.0 with citric acid.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 79.330
Sodium lauryl ether sulphate 70% paste 15.000 Huntsman, Rhodia
Sodium chloride 2.500 Fisher
Surfadone LP-300 1.000 ISP
Coconut diethanolamine 1.000 Aldrich
Integra 44 0.150 ISP
Citric acid (10% aqueous solution) 1.000 Fisher
Perfume/fragrance 0.010
Dye 0.010
Total 100.000
Washing up liquid featuring Surfadone LP-300 (formula #2)
11040-97-1
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 68.930
Sodium lauryl ether sulphate 70% paste (Zetosol 270 N0) 16.900 Zschimmer & Schwarz
Empigen BB (N, N-Dimethyl-N-dodecylglycerine Betaine) 6.500 Huntsman
Empigen OB (lauryl dimethyl amine oxide) (Empigen OB) 3.500 Huntsman
Sodium chloride 1.000 Fisher
Surfadone LP-100 1.000 ISP
Empilan KB9 (lauryl alcohol ethoxylate (9EO) 1.000 Huntsman
Integra 44 0.150 ISP
Citric acid (10% aqueous solution) 1.000 Fisher
Perfume/fragrance 0.010
Dye 0.010
Total 100.000
Ecological washing up liquid
11040-98-1
1. Charge water to the vessel.
2. Add sodium lauryl ether sulphate 70% paste and stir until dissolved.
3. Add Empigen BB, Empilan KB9 and Empigen OB, stir until dissolved.
Formulation instructions
4. Add Integra 44, dye and lemon fragrance.
5. Add NaCl.
6. Adjust pH to 6.8~7.0 with citric acid or NaOH
31
1. Add calcium chloride to water then add Keltrol-T and mix at very high speed for 20 minutes until dissolved.
2. Add sodium lauryl ether sulphate, Cocoamide DEA, Surfadone LP-300, NaCl and dye solution (1%) and mix well.
3. Dissolve Fragrance in Polysorbate 80 and add mix into the mixture.
4. Add Integra 44.
5. Add the ISP MicroBeads with slow gentle mixing.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 80.155
Sodium lauryl ether sulphate (Texapon N70) 15.000 Cognis
Sodium chloride (NaCl solid) 1.500 Fisher
Surfadone LP-300 1.000 ISP
Cocamide diethanol amide (Purton CFD) 1.000 Zschimmer & Schwarz
Integra 44 0.400 ISP
Dye 0.400
ISP MicroBeads 20278 0.200 ISP
Xanthan gum (Keltrol T) 0.200 CP Kelco
Calcium chloride (CaCl2 solid) 0.120 Fisher
Polysorbate 80 0.017 A & E Connock Ltd
Perfume/fragrance 0.008
Total 100.000
Washing up liquid with ISP MicroBeads 20278 (formula #1)
11364-71-D13
Formulation instructions
32
1. Add the Keltrol-T to the water at very high speed and mix 20 minutes until dissolves.
2. Add the Genapol LA 050, sodium lauryl ether sulphate, Disponil LDBS 25, Easy-Wet 20, CaCl
2

and NaCl into the mixture.
3. Prepare a 0.5% solution with the dye and add in to the mixture.
4. Dissolve the fragrance in the polysorbate 80 and add mix in to the mixture.
5. Add Integra 44.
6. Add the ISP MicroBeads with slow, gentle mixing.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 81.875
Sodium laureth sulphate (70%) (Texapon N70) 8.000 Cognis
Lauryl alkyl benzene sulphonate (Disponil LDBS-25) 5.000 Huntsman
Sodium chloride (NaCl solid) 1.500 Fisher
Easy-Wet 20 1.000 ISP
Fatty alcohol polyglycol ether Laureth 5 (Genapol LA-050) 1.000 Clariant
Xanthan gum (Keltrol T) 0.500 CP Kelco
Integra 44 0.400 ISP
Dye 0.400
ISP MicroBeads 20278 0.200 ISP
Calcium chloride (CaCl
2
solid) 0.100 Fisher
Polysorbate 80 0.017 A & E Connock Ltd
Perfume/fragrance 0.008
Total 100.000
Liquid laundry detergent with ISP MicroBeads 20278 (formula #2)
11364-72-E4
Formulation instructions
33
1. Add Jaypol AT4 in to water and add NaOH to neutralize Jaypol AT4.
2. Mix to obtain clear solution.
3. Add Hostapur SAS, sodium lauryl ether sulphate, Genapol LA 050, Surfadone LP-100,
lauryl dimethyl amine oxide and NaCl.
4. Dissolve the fragrance in the Polysorbate 80 and add to the mixture.
5. Add Integra 44.
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 69.601
Sodium lauryl ether sulphate (Texapon N70) 13.500 Cognis
Sodium C14-17 alkyl sec sulfonate (Hostapur SAS 60) 6.000 Clariant
Fatty alcohol polyglycol ether laureth 5 (Genapol LA-050) 3.000 Clariant
Jaypol AT4 3.000 ISP
Sodium chloride (NaCl solid) 2.500 Fisher
Lauryl dimethyl amine oxide (30%) (Amphotenside DMOX) 1.000 Zschimmer &Schwarz
Surfadone LP-100 0.500 ISP
Sodium hydroxide (NaOH 50% aq. solution) 0.460 Fisher
Integra 44 0.400 ISP
Polysorbate 80 0.026 A & E Connock Ltd
Perfume/fragrance 0.013
Total 100.000
Washing up liquid featuring Surfadone LP-100
11364-79-10
34
1. Add Jaypol AT4, Laponite RD into water and add NaOH to neutralize Jaypol AT4.
2. Mix to obtain clear solution.
3. Add Hostapur SAS, sodium lauryl ether sulphate, Genapol LA 050, Surfadone LP-100,
Amphotenside DMOX and NaCl.
4. Dissolve the fragrance in Polysorbate 80 and add to the mixture.
5. Add Integra 44.
6. Add the ISP MicroCapsules 4449 with gentle stirring.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 69.501
Sodium laureth sulphate (70%) (Texapon N70) 13.500 Cognis
Sodium C14-17 alkyl sec sulfonate (Hostapur SAS 60) 6.000 Clariant
Fatty alcohol polyglycol ether Laureth 5 (Genapol LA-050) 3.000 Clariant
Sodium chloride (NaCl solid) 2.500 Fisher
Jaypol AT4 2.300 ISP
Lauryl dimethyl amine oxide (Amphotenside DMOX) 1.000 Aldrich
Synthetic clay (Laponite RD) 0.700 Rockwood
Surfadone LP-100 0.500 ISP
Sodium hydroxide (NaOH 50% aq. solution) 0.460 Fisher
Integra 44 0.400 ISP
ISP MicroCapsules 4449 0.100 ISP
Polysorbate 80 0.026 A & E Connock Ltd
Perfume/fragrance 0.013
Total 100.000
Washing up liquid with ISP MicroCapsules 4449
11539-72-22
Formulation instructions
35
1. Dissolve the Gantrez S-97 BF into the water with mechanical mixing.
2. Neutralize Gantrez S-97 BF with TEA.
3. Add PVP K-90 while mixing. Wait until it completely dissolves.
4. Add sodium lauryl ether sulphate, Surfadone LP-300, and citric acid one by one.
Allow 3 minutes for each to be mixed. Add dye solution (1%) in to the mixture.
5. Premix Polysorbate 80 & fragrance then add into the formulation.
6. Add Integra 44.
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 87.690
Sodium lauryl ether sulphate 70% paste (Texapon N70) 7.500 Cognis
Gantrez 97 BF solution (as supplied) 1.000 ISP
PVP K-90 1.500 ISP
Surfadone LP-300 1.000 ISP
Triethanolamine (TEA) 0.600 Aldrich
Integra 44 0.400 ISP
Dye 0.100
Citric acid (solid) 0.100 Fisher
Polysorbate 80 0.070 A & E Connock Ltd
Perfume/fragrance 0.040
Total 100.000
Car shampoo
11678-10-26
1. Prepare base powder with ingredients listed above in stage A.
2. Mix base powder and Disintex 200 disintegrating agent in a V-mixer for 30 minutes.
3. Press mixed powder at 11 tons pressure using dry compression to make 20 g tablets.
(lab tabs were pressed using a Carver Automated Press at 387 psi and 1 sec. Dwell time)
4. Individual tabs were tested by submerging in 3 liters of DI water agitated at 700 rpm until complete dissolution
enabled tab granules to pass through a metal gauze cage.
Formulation
Ingredients % W/W Supplier
A. Sodium tripolyphosphate 39.200 Huntsman, Rhodia
Sodium carbonate 32.144 Aldrich
Sodium sulphate 18.914 Aldrich
Sodium metasilicate (Pentahydrate) 6.272 Huntsman, Rhodia
Sodium stearate (OP-100) 0.784 Huntsman, Rhodia
C13-15 fatty alcohol 7EO (C13-15) 0.686 Huntsman, Rhodia
B. Disintex 200 2.000 ISP
Total 100.000
Dishwasher detergent tablets
11040-100-1
Formulation instructions
36
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I.Water) 40.940
Parafnum liquidum (Parafn Light) 35.000 Merck/S. Black
Petroleum jelly (Vaseline) 15.000 Fisher
Antaron V-220 3.000 ISP
Carnuba wax 82.5 - 86.0C Melting Point 3.000 Merck/S. Black
Polyglyceryl-3 Oleate 2.300 A & E Connock Ltd
Integra 44 0.400 ISP
Polysorbate 80 0.260 A & E Connock Ltd
Perfume/fragrance 0.100
Total 100.000
Tire wax
11678-9-12
1. Carnauba wax, liquid parafn, vaseline and Antaron V-220 are heated to 80C while mixing.
2. Polyglyceryl 3 oleate added to the mix.
3. Add water and stir.
4. Premix Polysorbate 80 & fragrance then add into formulation.
5. Add Integra 44.
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 87.640
Sodium lauryl sulphate (20%) (Texapon K 12 P) 2.750 Cognis
Cerasynt 945 2.500 ISP
Surfadone LP-300 1.500 ISP
Parafnum liquidum (Parafn Light) 1.000 Merck/S.Black
Lauryl dimethyl amine oxide (Amphotenside DMOX) 1.000 Zschimmer & Schwarz
Integra 44 0.400 ISP
Polysorbate 80 0.130 A & E Connock Ltd
Perfume/fragrance 0.060
Citric acid (solid) 0.020 Fisher
Carnuaba wax 82.5 - 86.0C melting point 3.000 S Black
Total 100.000
Car wash and wax
11678-10-17
1. Add sodium lauryl sulphate into water while mixing.
2. Add lauryl dimethyl amine oxide and Surfadone LP-300 and heat to 80C while stirring.
3. Carnauba wax, liquid parafn and Cerasynt 945 are heated to 80C while mixing.
4. These are mixed together at 80C then mixed 3 minutes.
5. Cool down formulation to room temperature while mixing.
6. Premix Polysorbate & fragrance then add into formulation.
7. Add Integra 44 and citric acid to the formulation. Mix well.
Formulation instructions
37
1. Add Gantrez S-97 BF in to D.I Water.
2. Neutralize Gantrez S-97 BF with NaOH 10%.
3. Add PVP K-30 while mixing. Wait completely dissolves.
4. Put sodium carbonate, IPA, NEP, sodium lauryl sulphate, surfadone LP-100 and citric acid one by one,
waiting each time for 3 minutes while mixing.
5. Premix Polysorbate 80 & fragrance then add into formulation.
6. Add Integra 44.
Formulation instructions
1. Add acid to NEP and water with continuous stirring.
2. A slight exothermic reaction will occur.
3. Mix all ingredients until you have a homogenous cleaner solution.
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 84.000
Phosphoric acid (85%) 12.000 Aldrich
NEP Solvent 4.000 ISP
Total 100.000
Metal cleaner
11040-74-1
Formulation instructions
Formulation
Ingredients % W/W Supplier
Aqua/water (D.I. Water) 90.680
Isopropanol (IPA) 3.000 Fisher
Gantrez 97 BF solution (as supplied) 0.500 ISP
C12-C14 / 30 EO Na Sulfate (Disponil FES 77) 2.000 Cognis
Surfadone LP-100 0.500 ISP
NEP Solvent 1.000 ISP
PVP K-30 1.000 ISP
Integra 44 0.400 ISP
Citric acid (solid) 0.300 Fisher
Sodium carbonate (NaCO3) 0.300 Fisher
Sodium hydroxide (NaOH 10% aq. solution) 0.220 Fisher
Polysorbate 80 0.070 A & E Connock Ltd
Perfume/fragrance 0.030
Total 100.000
Wheel spray cleaner
11539-152-7
38
39
Committed to your formulation
ISP global R&D and technical service
At ISP, were continually working on developing ideas and technology that will help your cleaning
products stand out in the marketplace. Our global R&D network develops new chemistries for use
in innovative cleaning products and develops applications technology targeted to meeting the
changing needs of the marketplace.
To support your product development eforts, ISP maintains a regional technical service group with
locations in North America, Europe, the Middle East and Asia. Our experienced team can use their
expertise with ISP chemistries to help you achieve your formulation goals.
For more information, contact us at: info@ispcleaning.com
Customer Service
Toll free: 1 (800) 622-4423
Fax: +1 973 628-4001
info@ispcorp.com
Sample Center
Toll free: 1 (800) 243-6788
isp@chemicalmarketing.com
Cologne, Germany
Emil-Hofmann-Strasse 1-a
D-50996 Koln-Rodenkirchen
Germany
Telephone: +49 (2236) 9649-0
Poole, UK
Unit 9, Stepnell Reach, Poole,
Dorset, BH16 5BW, UK
Telephone: +44 (0) 1202 627353
World Headquarters
INTERNATIONAL SPECIALTY PRODUCTS
1361 Alps Road, Wayne, NJ 07470, USA
Tel: +1 973 628-4000
Fax: +1 973 628-3311
ispcorp.com info@ispcorp.com
North American Headquarters
European Headquarters
Customer Service
Tel: +49 (2236) 9649-260
Fax: +49 (2236) 9649-295
Trademark registration applied for Registered trademark of the ISP group
International Specialty Products. 2010 Designed & Printed in USA.
The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own
discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information
herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a products suitability for purchasers
use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its afliates shall
be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISPs or its
afliates conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE
OR PURPOSE. We also make no warranty against infringement of any patents by reason of purchasers use of any information, product, method or apparatus
described in this document.
ispcleaning.com

You might also like