Ensures complete annular packing for well longevity and productivity
Permits continued fracture development past bridge, ensuring stimulation and productivity across the interval
Enables multizone completions for more efficient operations, saving time and costs FEATURES
Bypasses sand bridges around the screen during pumping operations
Is compatible with all filter media, including wire-wrapped and premium mesh screens
Can be configured to meet gravel- or frac-packing requirements by adjusting the number and size of tubes
Aligns tubes automatically (optional feature) while connection is being made
Has unique connector design for ease of deployment Effective, complete gravel placement is critical to preventing formation sand production and completion failure. By providing a redundant mechanism to place a gravel pack around the screens inside the wellbore, Alternate Path
sand-control screens offer a
rugged and flexible technology for sand-control treatment design. Alternate Path screens can
lower the risk of gravel-pack failure
minimize rig time spent on sand-control pumping operations
increase wellbore operational reliability
increase completion longevity
maximize production and reserve recovery
provide economical solutions for completing multiple intervals. Standard sand control screens are the mechanical filter in sand control completions that prevent gravel from entering the tubing with the produced oil and gas. With standard screens, gravel-pack and STIMPAC* frac-pack operations would prematurely end when a bridge forms. A bridge can form where there is a large amount of leakoff from the wellbore, either to the screen or to the formation. Alternate Path technology uses shunt tubes to provide alternate slurry pathways that bypass the bridge. As soon as the bridge forms, the slurry flows through the tubes to any void below or past the bridge, allowing the sand control treatment to continue to its normal conclusion of 100% packing efficiency. Without this complete pack, screens will fail quickly. AllPAC screen The AllPAC
screen is used in gravel-pack completions or in frac-
pack applications for which it is necessary to complete the pack after a bridge is formed. This screen features one or more 1.000-in 0.500-in [25.4-mm 12.7-mm] shunt tubes that are attached either concentrically or eccentrically to the screen joint with 0.250-in [6.4-mm] exit nozzles spaced out on each shunt tube for optimum performance. This type of screen is typically used in gravel packs for which fracturing is not a priority. Treatment rates can be up to 2 bbl/min for each shunt tube, depending on the screen, the blank length, and the type of gravel-pack fluid. Tube configurations with multiple numbers of tubes are available for a wide variety of gravel packing requirements. Alternate Path shunt tubes provide alternate slurry path- ways that bypass bridges. AllPAC and AllFRAC Sand control screens with Alternate Path technology AllPAC and AllFRAC Alternate Path Screens *Mark of Schlumberger. Mark of ExxonMobil; technology licensed exclusively to Schlumberger. Copyright 2012 Schlumberger. All rights reserved. 12-SM-0013 AllFRAC screen The AllFRAC
screen is used in STIMPAC frac-pack completions. This
screen features one or more 1.500-in 0.750-in [38.1-mm 19.0-mm] shunt tubes, attached either concentrically or eccentrically to the screen joint, with 0.375-in [9.5-mm] exit nozzles spaced out on each shunt tube for optimum performance. This screen is ideal for use in higher-rate STIMPAC applications. Treatment rates can be up to 8 bbl/min for each shunt tube, depending on the screen, the blank length, and the type of carrier fluid. As with AllPAC screens, tube configurations with multiple tubes are available for a wide variety of well treatments and multizone well types. Alternate Path screen construction Alternate Path screen construction offers many advantages. The construction is robust. The screens are available in almost any metallurgy, and the shunt tubes are made of durable stainless steel. The nozzles are erosion resistant, and timed premium threads are available for simultaneous torquing of the screen joints and aligning of the shunt tubes. A unique connector design is also part of the system, allowing for easier makeup and deployment. www.slb.com/chsc Screen OD Screen shunt ring Screen shunt ring AllPAC Screen 9 3 Joint connector 0.75 in. Fishing OD Joint connector OD Pipe OD Pipe OD 0.5 in. 1 in. AllFRAC Screen Joint connector OD Fishing OD 1.5 in. Screen OD 090140H Wire 0.140 in. 0.087 in. 0.090 in. 0.105 in. 0.090 in. 0.089 in. 0.075 in. 090105 Wire AllPAC Screen Wire and Construction 090075 Wire 090140H/090105 090075/090075 Cross section of the AllPAC and AllFRAC screens. AllPAC screen wire sizes, construction, and flow pattern.