Professional Documents
Culture Documents
iConverter
XM5 Network Interface Device
Carrier Ethernet 2.0 Compliant 10 Gigabit NID
MEF Carrier Ethernet 2.0 Compliant 10 Gigabit and
1000Mbps Carrier Ethernet NID
Smallest full-function 10G NIDs available with the lowest
power consumption
Service Assurance with comprehensive Performance
Monitoring and Connectivity Fault Management
Rapid service deployments with Zero-Touch Provisioning
and Ethernet Service Activation Testing
Ethernet Protection Switching with sub-50ms failover
SNMP management with NetOutlook
Management
Software
Available with redundant, hot-swappable AC or DC
power inputs
Commercial (0 to 50C), wide (-40 to 60C) and
extended (-40 to 75C) temperature ranges
The iConverter
Network
Management software
LLDP Link Layer Discovery Protocol
MEF 30 and 31 Service OAM Fault Management MIBs
RACK MOUNT SHELF
1U high (1.75) Rack Mount Shelf accomodates up to
two XM5 NIDs
Multiple grounding points and convenient locations for
cable ties to organize and secure cabling
SERVICE OAM AND TESTING
IEEE 802.1ag End-to-End Connectivity Fault
Management (CFM) with 8 Maintenance Domain levels
and 256 Maintenance Associations
Supports IEEE 802.1ag Maintenance Intermediate Points
(MIPs) for fault isolation
Hardware-based Delay and Loopback measurement with
nanosecond resolution
ITU-T Y.1731 End-to-End Performance Monitoring
ITU-T Y.1731 threshold monitoring and threshold
crossing alerts
Advanced classifcation and fltering of Layer 1, 2, 3 or 4
subscriber traffc as an EVC or CoS fow*
IEEE 802.3ah Ethernet Link OAM with dying gasp
Zero Touch Provisioning
RFC 2544 with wire-speed, per fow testing of throughput,
latency, jitter and loss
ITU-T Y.1564 Ethernet Service Activation testing with
multi-fow testing of information rate, latency, jitter and
frame loss*
RFC 2544 and ITU-T Y.1564 test head support
generation/reception of in-service and out-of-service L2,
L3 and L4 frames
Per-port and per-fow Loopback with MAC swap
Compatible with third party in-band loopback testing
Built-in UTP cable tester for troubleshooting through to
the Customer Equipment
SYNCHRONIZATION AND TIMING
ITU-T G.8262 Synchronous Ethernet*
IEEE 1588v2 Boundary Clock*, Slave Clock* and
Transparent Clock
NTP Network Time Protocol
PROTECTION AND RESILIENCY
ITU-T G.8031 Ethernet Linear Protection Switching
ITU-T G.8032v2 Ethernet Ring Protection Switching with
multi-ring protection and sub-ring support
Sub-50ms failover for G.8031 and G.8032v2
Link Failover 50ms protection switching
Rapid Spanning Tree Protocol
* Future Release
Page 2 iConverter XM5
Page 3
800-675-8410 949-250-6510 www.omnitron-systems.com info@omnitron-systems.com 38 Tesla, Irvine, CA 92618
iConverter XM5
2014 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are registered trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifcations subject to change without notice.
091-19600-001-A 6/14
ORDERING INFORMATION SPECIFICATIONS
96 x x - x x - x x x
<Blank> Single Power Input
2 Redundant Power Inputs
B External Universal AC Power Supply
C 18-60VDC Isolated Terminal Power
00 No Gigabit Ports
02 Two 10/100/1000BASE-T RJ-45 Ports
04 Four 10/100/1000BASE-T RJ-45 Ports
20 Two 100/1000BASE-X SFP Ports
40 Four 100/1000BASE-X SFP Ports
9600 Three 10G SFP+ Ports
9601 Three 10G XFP Ports
Please consult Omnitron for other confgurations.
Description
iConverter XM5
10G Network Interface Device
Standard
Compliances
IEEE 802.1Q, 802.1ad, 802.1p, 802.3, 802.3ah,
802.1ag, 1588v2
RFC 2819 (RMON), 2863 (IF-MIB), 2131 (DHCP), 2544
ITU-T G.8031, G.8032, G.8262, Y.1731, Y.1564
MEF 30, 31, Carrier Ethernet 2.0
**
Management
Telnet, SNMPv1, SNMPv2c, SNMPv3, SSH, Serial
Console
Regulatory
Compliances
**
UL, CE, FCC Class A, NEBS Level 3, RoHS2, WEEE
Frame Size Up to 10,056 bytes
Port Type
Copper: 10/100/1000BASE-T
(RJ-45)
Fiber: 1000BASE-X (Gigabit and
100Mbps SFPs)
10GBASE-R (SFP+, XFP, and
SFP for Gigabit)
Serial:
(Management)
RS-232 (RJ-45)
Copper:
(Management)
10/100/1000BASE-T (RJ-45)
Cable Type
Copper: EIA/TIA 568 A/B, Category 5 and
higher
Fiber: Multimode: 50/125um, 62.5/125um
Single-mode: 9/125um
Serial:
(Management)
EIA/TIA 568 A/B, Category 3 and
higher
Copper:
(Management)
EIA/TIA 568 A/B, Category 5 and
higher
AC Power
Requirements
AC Power
Adapter:
100-240VAC~ 50-60Hz
0.6A @ 110VAC
DC Power
Requirements
2.5mm Barrel
Connector:
12VDC
Maximum power consumption 48W
3-Pin Terminal:
20VDC to 60VDC
Maximum power consumption 48W
Temperature
Commercial:
Wide:
Extended:
Storage:
0 to 50 C
-40 to 60 C
-40 to 75 C
-40 to 80 C
Dimensions
W: 7.29 x D: 9.15 x H: 1.63
L: 185.17mm x B: 232.41mm x H: 41.4mm
Weight 3.24 lbs (1.47 kg)
Humidity 5% to 95% (non-condensing)
Altitude -100m to 4,000m (operational)
Warranty 3 year warranty
**Compliances pending
<Blank> Standard Operating Temperature Range
W Wide Operating Temperature Range
Z Extended Operating Temperature Range
8261-0 1U 19 Rack Mount Shelf for XM5 NIDs
8261-2 1U 23 Rack Mount Shelf for XM5 NIDs