This document provides a material safety data sheet for 5020 Heat Seal Polypropylene film. It summarizes that the film is a polyolefin compound that is a transparent, odorless packaging film. It melts between 248-338°F, has a specific gravity of 0.9-0.92 g/cm3, and is insoluble in water. The film is not classified as dangerous goods and does not pose toxicity risks. When disposed of properly, it will not cause environmental damage.
This document provides a material safety data sheet for 5020 Heat Seal Polypropylene film. It summarizes that the film is a polyolefin compound that is a transparent, odorless packaging film. It melts between 248-338°F, has a specific gravity of 0.9-0.92 g/cm3, and is insoluble in water. The film is not classified as dangerous goods and does not pose toxicity risks. When disposed of properly, it will not cause environmental damage.
This document provides a material safety data sheet for 5020 Heat Seal Polypropylene film. It summarizes that the film is a polyolefin compound that is a transparent, odorless packaging film. It melts between 248-338°F, has a specific gravity of 0.9-0.92 g/cm3, and is insoluble in water. The film is not classified as dangerous goods and does not pose toxicity risks. When disposed of properly, it will not cause environmental damage.
740-548-4894 / Fax: 740-548-5177 / 800-848-6982 www.multi-plastics.com MATERIAL SAFETY DATA SHEET 5020 HEAT SEAL POLYPROPYLENE
Commercial Product Name Oriented Polypropylene Film 1.1 Chemical Family: Polyolefin Compound 1.2 Form: Packaging Film 1.3 CAS: 9003-07-0 1.4 Color: Transparent 1.5 Odor: None 2 Physical and safety data
Tested in accordance with: 2.1 Melting Point
248-338 o F
2.2 Specific Gravity
0.9-0.92 g/cm 2.3 Vapor pressure N/A
2.4 Solubility in water Insoluble
2.5 Flash point
Above 500 o F
2.8 Auto-Ignition temperature
Above 735 o F 2.9 Explosion limits N/A
2.10 Thermal decomposition Will occur
2.11 Hazardous Decomposition Products: Carbon Monoxide, Carbon Dioxide, other harmful products of oxidation 2.12 Stability: Stable 2.13 Further information: No unusual hazards. This MSDS has been prepared in compliance with the Federal OSHA Hazard Communication Standard 29 CFR 1910.1200. This product does not contain ingredients which would be considered to be a hazardous chemical under that standard.
3 Transport: Not classified as dangerous goods Not restricted for transportation Road, Marine & Air DOT Classification: Non-regulated commodity 4 Regulations: Not Classified 5 Health Hazards: None 5.1 Emergency First Aid Procedures: None anticipated. Melted polymer may produce severe burns requiring a physician. J anuary 2013 5.2 Respiratory protection: None required. 5.3 Protective clothing: None required. Use of industrial gloves and approved safety glasses meeting ANSI 2P7.1 standard recommended. 5.4 Fire fighting procedures: Use of trained personnel recommended. 5.5 Suitable extinguishing media: water fog, foam, powder, CO2, Halon (halogenated agents)
6.0 Environmental Protection: No special storage requirements.
7.0 Toxicity: Not toxic.
8.0 Information on local ecological effects: When disposed of under orderly conditions no environmental damage or effects will occur. Does not contain additives based on heavy metals like cadmium (Cd), lead (Pb), mercury (Hg), or chromium VI . 9.0 Further information: Unwinding, winding and passage through nips and over process rollers will tend to generate a strong electrostatic charge on the web. Static discharge devices should be properly positioned at such points to eliminate the charge and to prevent uncontrolled discharge from the web. This is particularly required in hazardous atmospheres and to protect personnel handling the film.
All statements made here are due to the most current and up-to-date state of our product knowledge. This has been derived from fully reliable sources and the opinion of persons believed to be experts, but is not to be taken as a product warrantee or of any representation of legal responsibility of the supplier.