H arris c orporation reserves the right to revise this docum entation and to m ake changes in content from time to time. Technical data and com puter softw are are com m ercial in nature and developed solely at private expense. You agree not to rem ove or deface any portion of any part of this manual.
H arris c orporation reserves the right to revise this docum entation and to m ake changes in content from time to time. Technical data and com puter softw are are com m ercial in nature and developed solely at private expense. You agree not to rem ove or deface any portion of any part of this manual.
H arris c orporation reserves the right to revise this docum entation and to m ake changes in content from time to time. Technical data and com puter softw are are com m ercial in nature and developed solely at private expense. You agree not to rem ove or deface any portion of any part of this manual.
Rev. B Part Number P061-0011 VSG-401 SDI Video Signal Generator Installation and Operation Manual Revision B August 2011 Harris Corporation Broadcast Communications Division 4393 Digital Way Mason, OH USA 45040 C opyright 2011 H arris C orporation, 1025 W est N A SA Boulevard, M elbourne, Florida 32919-0001 U .S.A . A ll rights reserved. This publication supersedes all previous releases. N o part of this docum entation m ay be reproduced in any form or by any m eans or used to m ake any derivative w ork w ithout perm ission from H arris C orporation. H arris C orporation reserves the right to revise this docum entation and to m ake changes in content from tim e to tim e w ithout obligation on the part of H arris C orporation to provide notification of such revision or change. UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following: A ll technical data and com puter softw are are com m ercial in nature and developed solely at private expense. Softw are is delivered as C om m ercial C om puter Softw areas defined in D FA RS 252.227-7014 (June 1995) or as a com m ercial item as defined in FA R 2.101(a) and as such is provided w ith only such rights as are provided by H arrisstandard com m ercial license for the Softw are. Technical data is provided w ith lim ited rights only as provided in D FA R 252.227-7015 (N ov 1995) or FA R 52.227-14 (June 1987), w hichever is applicable. You agree not to rem ove or deface any portion of any legend provided on any licensed program or docum entation contained in, or delivered to you in conjunction w ith, this U ser G uide. This publication, or any part thereof, m ay not be reproduced in any form , by any m ethod, for any purpose, w ithout the w ritten consent of H arris C orporation. C ontact H arris C orporation for perm ission to use m aterials as w ell as guidelines concerning foreign language translation and publication. H arris C orporation reserves the right to revise and im prove its products as it chooses. This publication is designed to assist in the use of the product, as it exists on the date of publication of this m anual, and m ay not reflect the product at the current tim e or an unknow n tim e in the future. This publication does not in any w ay w arrant description accuracy or guarantee the use for the product to w hich it refers. The H arris logo and assured com m unications are registered tradem arks of H arris C orporation. D -Series is a tradem ark of H arris C orporation. A ll other tradem arks are held by their respective ow ners. This user guide w as created for VSG -401, Revision B. W indow s is a registered tradem ark of M icrosoft C orporation. A M D and O perton are tradem arks of A dvanced M icro D evices, Inc. D olby D igital is a registered tradem ark of D olby Laboratories. Java is a tradem ark of Sun M icrosystem s, Inc. or its subsidiaries in the U nited States and other countries. A ll other tradem arks are the property of their respective holders. Publication D ate: A ugust 2011 iii C opyright 2011, H arris C orporation Contents About This Manual .................................................................................................1 Intended Audience ........................................................................................................1 Finding Specific Information .........................................................................................1 Manual Information.......................................................................................................2 Revision H istory ..........................................................................................................2 W riting C onventions ..................................................................................................2 O btaining D ocum ents ................................................................................................3 Unpacking/Shipping Information..................................................................................3 U npacking a Product ..................................................................................................3 Product Servicing .......................................................................................................3 Returning a Product ...................................................................................................3 Operators Safety Summary...........................................................................................4 Ensuring Safety ..........................................................................................................4 Explanation of Sym bols ..............................................................................................5 C ertification Labels and Sym bol Locations ..................................................................5 Directives and Compliances ..........................................................................................6 Restriction on H azardous Substances (RoH S) D irective ................................................6 W aste from Electrical and Electronic Equipm ent (W EEE) D irective ...............................6 Chapter 1 Introduction..............................................................................................................9 Product Features.............................................................................................................9 Standard Features ......................................................................................................9 O ptional Features .....................................................................................................10 A pplicable Standards ...............................................................................................10 Front Panel and Back Panel Views .............................................................................11 Safety............................................................................................................................11 VSG-401 Service and Support .....................................................................................12 Chapter 2 Installation..............................................................................................................13 Installation Procedures.................................................................................................13 Inspecting the Shipm ent ..........................................................................................13 Rack M ounting the VSG -401 ...................................................................................14 Connecting the VSG-401 .............................................................................................16 Ethernet Setup .............................................................................................................17 C ontents iv C opyright 2011, H arris C orporation Chapter 3 Operation..................................................................................................................19 Controlling the VSG-401..............................................................................................19 Front Panel C ontrols ...............................................................................................19 Front Panel Selections .................................................................................................22 Selecting a Function .................................................................................................22 Status D isplay ..........................................................................................................22 Quick Start ...................................................................................................................25 Accessing and Navigating the Setup Menu ...............................................................26 Genlocking the Unit.....................................................................................................27 V2A Timing Mode.........................................................................................................29 Chapter 4 Setup Menu Functions........................................................................................31 Setup Menus and Alarm Tables...................................................................................32 SDI Out Setup Menu.....................................................................................................32 M enu Selections ......................................................................................................32 M enu Selection D escriptions ....................................................................................34 Audio Out Setup Menu................................................................................................35 M enu Selections ......................................................................................................35 M enu Selection D escriptions ....................................................................................36 Sync Out Setup Menu..................................................................................................36 M enu Selections ......................................................................................................36 M enu Selection D escriptions ....................................................................................36 Timing Offset Setup Menu..........................................................................................37 TC Insertion Setup Menu ............................................................................................38 M enu Selections ......................................................................................................38 M enu Selection D escriptions ....................................................................................38 Unit Configuration Setup Menu .................................................................................39 M enu Selections ......................................................................................................39 M enu Selection D escriptions ....................................................................................39 About Menu..................................................................................................................40 M enu Selections ......................................................................................................40 M enu Selection D escriptions ....................................................................................41 Chapter 5 External Control ....................................................................................................43 Browser Interface.........................................................................................................43 Accessing the Web-Based Control Panel ....................................................................44 Managing User Accounts ............................................................................................45 A dding A ccounts .....................................................................................................45 Editing A ccounts ......................................................................................................46 D eleting A ccounts ....................................................................................................46 Accessing the About Page ..........................................................................................47 Chapter 6 Troubleshooting....................................................................................................49 VSG -401 Installation and Operation Manual v C opyright 2011, H arris C orporation Initial Checks.................................................................................................................49 Restarting......................................................................................................................49 Problems, Causes, and Solutions ................................................................................50 Chapter 7 Specifications.........................................................................................................51 Genlock Input ...............................................................................................................51 Outputs.........................................................................................................................51 Audio ............................................................................................................................53 Embedded Audio..........................................................................................................53 Display...........................................................................................................................54 Communication Interfaces...........................................................................................54 Ethernet ........................................................................................................................54 Power Requirements....................................................................................................54 Mechanical....................................................................................................................55 Environmental ..............................................................................................................55 Applicable Standards...................................................................................................55 Standard and Optional Accessories............................................................................55 Appendix A VSG-401 Pinouts...................................................................................................57 LTC/GPI D-Sub Connector.............................................................................................57 Ethernet RJ45 Connector ............................................................................................58 Power Connector..........................................................................................................58 Appendix B Glossary.....................................................................................................................59 Appendix C Open Source Software Copyright Information.......................................71 FreeType License...........................................................................................................71 LibJPEG License.............................................................................................................71 CMU/UCD Copyright Notice.........................................................................................71 Networks Associates Technology, Inc. Copyright Notice (BSD).................................72 Cambridge Broadband Ltd. Copyright Notice (BSD)..................................................72 Sun Microsystems, Inc. Copyright Notice (BSD).........................................................73 Sparta, Inc. Copyright Notice (BSD).............................................................................74 Cisco/BUPTNIC Copyright Notice (BSD).......................................................................74 Fabasoft R&D Software GmbH & Co. KG Copyright Notice (BSD)............................75 The GNU v2 License......................................................................................................75 G N U G eneral Public License .....................................................................................75 G N U G eneral Public License .....................................................................................76 GNU Lesser Public License............................................................................................80 G N U Lesser G eneral Public License ...........................................................................80 G N U Lesser G eneral Public License ...........................................................................82 C ontents vi C opyright 2011, H arris C orporation Index...........................................................................................................................87 1 C opyright 2011, H arris C orporation About This Manual This m anual details the features, installation procedures, operational procedures, and specifications of the VSG -401 SD I video signal generator. About This Manual provides an overview of this installation and operation m anual, describes m anual conventions, and tells you w here to look for specific inform ation. This section also gives you im portant inform ation on unpacking and shipping your product. Intended Audience This m anual is w ritten for engineers, technicians, and operators responsible for the installation, setup, and / or operation of the VSG -401 SD I video signal generator. Finding Specific Information Table P-1 show s the location of specific inform ation in this m anual. Table P-1 Finding Specific Inform ation in this G uide If you are looking f or Go to Back panel inform ation Page 16 Brow ser interface Page 43 C onnecting Page 16 C ontrol panels Page 11 C ustom er Service inform ation Page 12 Ethernet setup and configuration Page 17 External control Page 43 Features Page 9 Front panel inform ation Page 11, Page 19, Page 22 M ounting the unit in a D RT-4 case Page 14 O ptions Page 10 Pinouts Page 57 A bout This M anual 2 C opyright 2011, H arris C orporation Manual Information This section provides inform ation about the revision history of the m anual, w riting conventions used for ease of understanding as w ell as for navigation throughout the docum ent, and inform ation about obtaining other product m anuals. Revision History Writing Conventions To enhance your understanding, the authors of this m anual have adhered to the follow ing text conventions: Setup m enus Page 31 Specifications Page 51 Troubleshooting Page 49 U ser accounts Page 45 Table P-1 Finding Specific Inform ation in this G uide (Continued) If you are looking f or Go to Table P-2 M anual Revision H istory Edition Date Revision History A M arch 2011 Initial release B A ugust 2011 A ddition of TC Insertion m enu and functionality Table P-3 M anual Style and W riting C onventions Term or Convention Description Bold Indicates dialog boxes, property sheets, fields, buttons, check boxes, list boxes, com bo boxes, m enus, subm enus, w indow s, lists, and selection nam es Italics Indicates em ail addresses, the nam es of books or publications, and the first instances of new term s and specialized w ords that need em phasis C A PS Indicates a specific key on the keyboard, such as EN TER, TA B, C TRL, A LT, or D ELETE Code Indicates variables or com m and-line entries, such as a D O S entry or som ething you type into a field > or Indicates the direction of navigation through a hierarchy of m enus and w indow s hyperlink Indicates a jum p to another location w ithin the electronic docum ent or elsew here VSG -401 Installation and Operation Manual 3 C opyright 2011, H arris C orporation Obtaining Documents The installation and operation m anuals for m ost H arris BC D products are included on your VSG & VSX Products O perators H andbook C D as individual A dobe A crobat PD F files. M ost of the softw are applications contained on the C D include O nline H elp (electronic docum ents integrated into their respective softw are applications). W hile w orking in the application, you can open the O nline H elp and print out individual topics. The m ost up-to-date docum entation and softw are is alw ays available on our w ebsite. Unpacking/Shipping Information This product w as carefully inspected, tested, and calibrated before shipm ent to ensure years of stable and trouble free service. Unpacking a Product 1 C heck equipm ent for any visible dam age that m ay have occurred during transit. 2 C onfirm that you have received all item s listed on the packing list. 3 C ontact your dealer if any item on the packing list is m issing. 4 C ontact the carrier if any item is dam aged. 5 Rem ove all packaging m aterial from the product and its associated com ponents before you install the unit. Product Servicing The VSG -401 SD I video signal generator is not designed for field servicing. A ll hardw are upgrades, m odifications, or repairs require you to return the VSG -401 to the C ustom er Service center. For m ore inform ation see VSG-401 Service and Support on page 12. Returning a Product In the unlikely event that your product fails to operate properly, please contact C ustom er Service to obtain a Return A uthorization (RA ) num ber, and then send the unit back for servicing. Internet address Indicates a jum p to a w ebsite or U RL Indicates im portant inform ation that helps to avoid and troubleshoot problem s To perform a procedure Indicates the introduction to a procedure or series of procedural steps Table P-3 M anual Style and W riting C onventions (Continued) Term or Convention Description A bout This M anual 4 C opyright 2011, H arris C orporation Keep at least one set of original packaging, in the event that you need to return a product for servicing. If the original packaging is not available, you can purchase replacem ent packaging at a m odest cost or supply your ow n packaging as long as it m eets the follow ing criteria: W ithstands the w eight of the product H olds the product rigid w ithin the packaging Leaves at least tw o inches of space betw een the product and the container Protects the corners of the product Ship products back to us for servicing prepaid and, if possible, in the original packaging m aterial. If the product is still w ithin the w arranty period, w e w ill return the product prepaid after servicing. For m ore inform ation see VSG-401 Service and Support on page 12. Operators Safety Summary Ensuring Safety If this equipm ent is used in a m anner not specified by the m anufacturer, the protection provided by the equipm ent m ay be im paired. The unit should not be exposed to dripping or splashing, and no objects filled w ith liquids, such as vases, shall be placed on the unit. W hen the unit is to be perm anently cabled, connect the protective ground conductor before m aking any other connections. O perate built in units only w hen they are properly fitted into the system . For perm anently cabled units w ithout built in fuses, autom atic sw itches, or sim ilar protective facilities, the A C supply line m ust be fitted w ith fuses rated to the units. Before sw itching on the unit, ensure that the operating voltage set at the unit m atches the line voltage, if appropriate. If a different operating voltage is to be set, use a fuse w ith the appropriate rating. Refer to the Installation Instructions. U nits of Protection C lass I w ith an A C supply cable and plug that can be disconnected m ust be operated only from a pow er socket w ith protective ground contact: D o not use an extension cableit can render the protective ground connection ineffective. D o not intentionally interrupt the protective ground conductor. D o not break the protective ground conductor inside or outside the unit or loosen the protective ground connection; such actions can cause the unit to becom e electrically hazardous. Before opening the unit, isolate it from the A C supply. Then, ensure that A djustm ents, part replacem ents, m aintenance, and repairs are carried out by qualified personnel only. Safety regulations and rules are observed to prevent accidents. WARNING: These instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform this installation or any servicing unless you are qualified to do so. Refer all servicing to qualified service personnel. VSG -401 Installation and Operation Manual 5 C opyright 2011, H arris C orporation O nly original parts are used to replace parts relevant to safety (for exam ple, the pow er on/off sw itches, pow er transform ers, and fuses). Replaceable fuses can be hazardous w hen live. Before replacing a fuse, disconnect the A C pow er source. U se caution w hen cleaning the equipm ent; isopropyl alcohol or sim ilar solvents can dam age or rem ove the labels. O bserve any additional safety instructions specified in this m anual. Explanation of Symbols These sym bols m ay appear on H arris equipm ent: Figure P-1 Safety Sym bols A ppearing on H arris Equipm ent This product m anual uses the follow ing safety term s and sym bols to identify certain conditions or practices. Certification Labels and Symbol Locations O n H arris equipm ent, certification labels and sym bols are located on the back panel, rear chassis sides, or bottom rear of the chassis. O n sm aller space-restricted units, m ost labels and sym bols can be found on the bottom rear of the chassis. Table P-4 Safety Term s and Sym bols A ppearing in the Product M anual Symbol Description WARNING: Identifies conditions or practices that can result in personal injury or loss of life high voltage is present. Uninsulated dangerous voltage within the products enclosure may be sufficient to constitute a risk of electric shock to persons. CAUTION: Identifies conditions or practices that can result in damage to the equipment or other property. Important operating and maintenance (servicing) instructions are included in the literature accompanying the product. A bout This M anual 6 C opyright 2011, H arris C orporation Directives and Compliances This section provides inform ation concerning H arris C orporation com pliance w ith EU D irective 2002/95/EC and EU D irective 2002/96/EC . Restriction on Hazardous Substances (RoHS) Directive Directive 2002 / 95 / EC com m only know n as the European Union (EU) Restriction on Hazardous Substances (RoHS) sets lim its on the use of certain substances found in electrical and electronic equipm ent. The intent of this legislation is to reduce the am ount of hazardous chem icals that m ay leach out of landfill sites or otherw ise contam inate the environm ent during end-of-life recycling. The D irective, w hich took effect on July 1, 2006, refers to the follow ing hazardous substances: Lead (Pb) M ercury (H g) C adm ium (C d) H exavalent C hrom ium (C r-V1) Polybrom inated Biphenyls (PBB) Polybrom inated D iphenyl Ethers (PBD E) In accordance w ith this EU D irective, products sold in the European U nion w ill be fully RoH S-com pliant and lead-free.Spare parts supplied for the repair and upgrade of equipm ent sold before July 1, 2006 are exem pt from the legislation. Equipm ent that com plies w ith the EU directive w ill be m arked w ith a RoH S-com pliant sym bol, as show n in Figure P-2. Figure P-2 RoH S C om pliance Sym bol Waste from Electrical and Electronic Equipment (WEEE) Directive The European Union (EU) Directive 2002 / 96 / EC on Waste from Electrical and Electronic Equipment (WEEE) deals w ith the collection, treatm ent, recovery, and recycling of electrical and electronic w aste products. The objective of the W EEE D irective is to assign the responsibility for the disposal of associated hazardous w aste to either the producers or users of these products. A s of A ugust 13, 2005, producers or users are required to recycle electrical and electronic equipm ent at end of its useful life, and m ust not dispose of the equipm ent in landfills or by using other unapproved m ethods. (Som e EU m em ber states m ay have different deadlines.) In accordance w ith this EU D irective, com panies selling electric or electronic devices in the EU w ill affix labels indicating that such products m ust be properly recycled. C ontact your local Sales representative for inform ation on returning these products for recycling. Equipm ent that com plies w ith the EU directive w ill be m arked w ith a W EEE-com pliant sym bol, as show n in Figure P-3. VSG -401 Installation and Operation Manual 7 C opyright 2011, H arris C orporation Figure P-3 W EEE C om pliance Sym bol A bout This M anual 8 C opyright 2011, H arris C orporation 9 C opyright 2011, H arris C orporation 1 Introduction The new Videotek VSG -401 is a 1 RU , half rack w ide, dual-link, 3G /H D /SD signal and sync generator. Part of the Videotek C om pact M onitor Series, the unit is sm all in size and light in w eight, m aking it a perfect fit for all broadcast television and post production environm ents. The VSG -401 provides four SD I test signal outputs w ith selectable form at, fram e rate and signal type, and up to 16 channels of em bedded audio, w ith group enable settings and global settings for am plitude and frequency. There are tw o A ES outputs, w ith one output selectable as w ord clock or digital audio reference signal (D A RS). A lso included are tw o selectable blackburst or tri-level sync outputs and a reference input for blackburst or tri-level sync. The test signal outputs on the VSG -401 allow source ID selection up to 19 characters. U sers can add continuous m otion of a bouncing block to any test pattern except check field. The VSG -401 is sim ple to operate, w ith an Ethernet port facilitating softw are updates and W eb brow ser control. A 110/220 universal A C adapter provides D C voltage pow er input. Product Features The VSG -401 includes the follow ing standard and optional features. Standard Features Sm all form factor Four outputs (tw o for dual link), selectable as 3 G b/s, H D , SD or D L Tw o blackburst or tri-level sync outputs Tw o A ES/EBU outputs U p to 16 channels of em bedded audio test signals Selectable audio level and frequency 19-character source ID can be added to test signals G enlock to standard color black or tri-level sync G enlock auto external or internal settings Front-panel genlock and input status LED Ethernet port for updates and W eb brow ser C hapter 1 Introduction 10 C opyright 2011, H arris C orporation Optional Features Rack adapter and blank filler plate Applicable Standards SMPTE 125M-1995: C om ponent Video Signal 4:2:2Bit-Parallel D igital Interface SMPTE 259M-1997: SD TV D igital Signal/D ataSerial D igital Interface SMPTE 274M-2005: 19201080 Im age Sam ple Structure, D igital Representation and D igital Tim ing Reference Sequences for M ultiple Picture Rates SMPTE 276M: Transm ission of A ES/EBU D igital A udio Signals O ver C oaxial C able SMPTE 292M-1998: 1.5 G b/s Signal/D ata Serial Interface SMPTE 296M-2001: 1280720 Progressive Im age Sam ple StructureA nalog and D igital Representation and A nalog Interface SMPTE 299M -2004: M apping of 24-bit A ES digital audio data and associated control inform ation into the ancillary data space of a serial digital video SMPTE 372M-2002: D ual Link 292M Interface for 19201080 Picture Raster SMPTE 424M-2006: 3 G b/s Signal/D ata Serial Interface SMPTE 425M-2006: 3 G b/s Signal/D ata Serial InterfaceSource Im age Form at M apping Table 1-1 VSG -401 O ptional Features and D escriptions Option Description TVM -W RTY2 W arranty option; adds three years to the standard tw o-year w arranty BLK-4 Blank panel for D RT-4 D RT-4 D ouble rack m ount case PTC -4 D esktop case w ith tilt stand VSG -401 Installation and Operation Manual 11 C opyright 2011, H arris C orporation Front Panel and Back Panel Views Figure 1-1 show s the front and back panel view s of the VSG -401. See Table 3-1 on page 20 for descriptions of the front panel com ponents. See Table 2-2 on page 16 for descriptions of the back panel com ponents. Front Panel Back Panel Figure 1-1 VSG -401 Front and Back Panels Safety See the Operators Safety Summary on page 4 for a list of im portant safety instructions. C arefully observe all safety alert sym bols for dangers, w arnings, and cautions. They alert installers and operators of possible dangers or im portant inform ation contained in this m anual. Keep in m ind, though, that w arnings alone do not elim inate hazards, nor are they a substitute for safe operating techniques and proper accident prevention m easures. C hapter 1 Introduction 12 C opyright 2011, H arris C orporation VSG-401 Service and Support For service and support, telephone the H arris C ustom er Service D epartm ent at 1-888-534-8246. If the problem cannot be resolved over the telephone and the instrum ent m ust be shipped to H arris for service or repair: O btain a Return A uthorization (RA ) num ber from the H arris C ustom er Service D epartm ent. A ttach a tag to the unit w ith the follow ing inform ation: Your com pany nam e, address, and telephone num ber The nam e of the contact person at your com pany The RA num ber The unit serial num ber A n explanation of the problem To prevent shipping dam age, pack the unit the sam e w ay H arris had packed it. If possible, use the original packing m aterials in the original shipping container. Ship the unit to H arris C orporation Videotek Test and M easurem ent A ttn: RA xxxx (w here xxxx is the RA num ber) Em ail: BC D Service@ harris.com 13 C opyright 2011, H arris C orporation 2 Installation Installation Procedures Inspecting the Shipment Before installing the VSG -401, inspect the box and the contents. Report any dam age to the shipper, and then telephone the H arris C orporation C ustom er Service D epartm ent (see VSG-401 Service and Support on page 12). The box contains the follow ing: O ne VSG -401 O ne VSG-401 Installation and Operation Manual on C D O ne detachable pow er cord O ne pow er supply assem bly O ne breakout connector (for LTC /G PI) Save the box and packing m aterial for any future shipping requirem ents. Refer to the enclosed packing sheet for the latest list of items that are supplied with the unit. C hapter 2 Installation 14 C opyright 2011, H arris C orporation Rack Mounting the VSG-401 W hen selecting the perm anent m ounting location for the VSG -401, m ake sure that the flow of air to the ventilation holes on the top and sides of the chassis is not obstructed. Rack m ounting the VSG -401 is illustrated in Figure 2-1 for the D RT-4 rack m ount case. Table 2-1 lists the parts required to rack m ount the VSG -401 into the D RT-4 rack m ount case. Figure 2-1 M ounting the VSG -401 in a Rack U sing the D RT-4 Although only one VSG-401 unit is shown in Figure 2-1, two VSG-401 units may be mounted into a DRT 4 rack case. Table 2-1 Parts for Rack M ounting the VSG -401 U sing the D RT-4 Key Item Number Qty Description 1 - A /R VSG -401 unit 2 866080 1 D RT-4 rack tray 3 832072 2 M etal extension m ount 4 832070 2 M etal extension bracket 5 831030 8 #10-32 -in. Phillips head screw s VSG -401 Installation and Operation Manual 15 C opyright 2011, H arris C orporation 1 Install the extension bracket m ounts (ITEM 3) to both sides of the chassis (ITEM 2) using four #8-32 kep nuts (ITEM 7) 2 Install the assem bled unit in a rack using #10-32 -in Phillips head screw s (ITEM 5) and w ashers (ITEM 6) through the chassis front m ounting ears, as show n. 3 H old the extension bracket (ITEM 4) in place on each side of the chassis, and loosely install #8-32 -in. Phillips head screw s (ITEM 9), #10 flat w ashers (ITEM 10), and #8-32 kep nuts (ITEM 7) into the holes that align w ith the slots in the m etal extension m ount (ITEM 3). 4 Install the #10-32 -in. Phillips head screw s (ITEM 5), #10 flat w ashers (ITEM 10), and #10-32 -in. Phillips head screw s (ITEM 11) through the rack rails and the appropriate slots in the back of the m etal extension bracket (ITEM 4), and then tighten them . 5 Tighten the rem aining hardw are that joins the bracket pairs (ITEM 3 and ITEM 4). 6 U sing 3/8-in. Phillips head screw s (ITEM 8), secure the VSG -401 unit to the back of the D RT-4 rack case. 7 If desired, install the optional BLK-4 cover plate: Slide the m etal cover plate (ITEM 12) into the desired side of the D RT-4 rack. U sing 4 self tapping screw s (ITEM 13), secure the cover plate into the D RC -3 rack. 8 The installation is com plete. 6 831019 4 N ylon w asher, rack m ount 7 831119 8 #8-32 kep nuts 8 831131 4 #8-323/8-in. Phillips head screw s (C M N m tg) 9 831064 4 #8-32 -in. Phillips head screw s 10 831118 8 #10 flat w ashers 11 831030 4 #10-32 -in. Phillips head screw s 866073 FP BLK-4 (optional cover plate) 12 832131 1 D RT-4 m etal blank panel 13 831136 4 #4-40 self-tapping Phillips head screw s Table 2-1 Parts for Rack M ounting the VSG -401 U sing the D RT-4 (Continued) Key Item Number Qty Description C hapter 2 Installation 16 C opyright 2011, H arris C orporation Connecting the VSG-401 The back panel connectors are illustrated in Figure 2-2, and the function of each connector is described in Figure 2-2. Figure 2-2 VSG -401 Back Panel C onnectors Table 2-2 D escription of Back Panel C onnectors Key Label Description 1 PW R 11-17VD C Pow er connector 1 1 See VSG-401 Pinouts on page 57 for the connections. 2 ETH ERN ET RJ45, fem ale, 10/100Base-T Ethernet connector 1 3 A ES1 A ES 1 A dedicated A ES O utput BN C connector 4 A ES2/D A RS/W C U ser-seletable A ES, D A RS or W ord C lock output connector 5 SD I A and SD I B O utput BN C connectors for SD I A and B 6 LTC /G PI 15-pin, high-density fem ale D -sub connector for LTC /G PI input/output 1
7 REF IN Reference Input BN C s 8 SYN C O U T Sync O utput BN C s VSG -401 Installation and Operation Manual 17 C opyright 2011, H arris C orporation Ethernet Setup 1 Prior to perform ing the VSG -401 netw ork configuration, obtain TC P/IP addresses from the system adm inistrator or the Internet service provider (ISP). These addresses are a static IP address (unless using D ynam ic H ost C onfiguration Protocol [D H C P]), a subnet m ask, and an optional gatew ay IP. Be sure to record all addresses in the spaces provided below . The gatew ay address is not needed unless the VSG -401 is routed to an outside netw ork. 2 Identify a host PC to configure and test the VSG -401. 3 C hoose a dedicated PC connection or netw ork connection m ethod: For a dedicated PC connection, connect the host PC w ith a netw ork card to the EN ET connector on the back panel of the VSG -401, using a C AT5 netw ork cable (not included). See Figure 2-3. Figure 2-3 VSG -401 D edicated PC C onnection For a netw ork connection, connect the netw ork hub to the back panel of the VSG -401 using a C AT5 netw ork cable (not included). See Figure 2-4. The Ethernet default settings for the VSG-401 are as follows: IP: 192.168.0.100 Subnet Mask: 255.255.255.0 Gateway: 0.0.0.0 VSG -401 interface static IP address VSG -401 interface subnet m ask G atew ay IP address C hapter 2 Installation 18 C opyright 2011, H arris C orporation Figure 2-4 VSG -401 N etw ork PC C onnection 4 Set up an Ethernet configuration for the VSG -401 as follow s: a Press the SETUP button on the VSG -401 front panel. b Press the U p/D ow n arrow button to scroll to the U nit C onfiguration Setup m enu, and then press the ENT button to enter the subm enu. c Press the U p/D ow n arrow button until the IP selection option is show n. d Press the ENT button or Left/Right arrow button to enter the Ethernet C onfig selection option. e Select DHCP Control, and then press the ENT button, or use the right arrow to scroll to the next selection. (U se the U p/D ow n arrow s to change the selection.) f O nce enabled, the obtained D H C P address can be view ed through IP IP Address g If using D H C P: Press the Left/Right arrow button to select DHCP. Press the U p/D ow n arrow button to toggle the state to ON. Press the ENT button. The IP A ddress is retrieved from the D H C P server and placed under the appropriate subm enu. h If not using D H C P: Press the Left/Right arrow button to select IP ADDRESS. Press the U p/D ow n arrow button to change the value selected, and then press the Left/Right arrow button to select the next value. Repeat for the rem ainder of the IP address, subnet m ask, and gatew ay. To avoid conflicts, the static IP address, subnet m ask, and gatew ay should be obtained from the system adm inistrator. Press the ENT button to accept the entered values. i Press the EXIT button to exit the subm enu. 19 C opyright 2011, H arris C orporation 3 Operation Controlling the VSG-401 The VSG -401 is controlled in these w ays: Quick Controls: C ontrols on the front panel that adjust param eters that are frequently used. See Front Panel Controls on page 19 for m ore inform ation about front panel controls. Menu Settings: Shortcut m enus w ithin a function that are used to control the param eters for the individual function. Global Setup Menu Settings: Setup m enu param eters that affect the entire unit (not function-specific). The Setup m enu is accessed by pressing the SETUP button. Web Interface Control: A PC , using a w eb brow ser, connects to the VSG -401 using the Ethernet IP address. Front Panel Controls The front panel controls and w eb-based controls are illustrated in Figure 3-1. See Chapter 5, External Control on page 43 for inform ation on how to access the w eb-based controls. Pressing and holding certain buttons will activate menus for additional functionality. See Table 3-1 for more information. Web-based controls are accessible from a computer that has Java Standard Edition Version 6, Update 17 or later installed. (Java can be downloaded at www.java.com.) C hapter 3 Operation 20 C opyright 2011, H arris C orporation Figure 3-1 VSG -401 Front Panel C ontrols M ost buttons and text are in a low -tally (low illum ination) state; under certain conditions, how ever, som e buttons and text reach a high-tally (high illum ination) state, as described in Table 3-1. The high and low tally illum ination levels can be set in the H igh Tally and Low Tally selection options of the U nit C onfiguration Front Panel setup m enu selection option (see page 39). Multiple buttons may be high tally at the same time. The last control selected is the active control. Table 3-1 VSG -401 Front Panel C ontrols Key Label Description 1 LO C K Lock button; press and hold to lock or unlock the front panel 2 D isplay w indow 3 SETU P Setup button; press and release to access Setup m ode Press and release to exit the displayed Setup m enu 4 FM T This button is used to select the video form at 5 BA RS This button is used to enable and configure the colorbar output signals 6 RA TE This button is used to select the fram e rate associated w ith the active video 7 PTRN This button is used to enable and configure the non-colorbar output signals 8 M O VE This button is used to toggle through the test signal m otion selection 9 ID This button is used to toggle source ID on or off 10 A M P This button is used to select the audio output am plitude 11 V This button is used to adjust the vertical output tim ing 12 H This button is used to adjust the horizontal output tim ing 13 FREQ This button is used to select the output audio frequency 14 REF Toggles betw een Internal and G enLock operational m odes VSG -401 Installation and Operation Manual 21 C opyright 2011, H arris C orporation 15 G RP This button is used to enable the em bedded audio groups 16 N avigation U se to navigate m enus and select selection options (see page 31 for an explanation of how to operate the navigation item s) 17 EXIT Exit selection button; press and release to leave m enu function selections 18 LO C K STA TU S (Red) Indicates that a G enlock error has occurred LO C K STA TU S (G reen) Indicates that the unit has locked to the reference input 19 G EN LO C K Indicates that the unit is in external G enlock m ode 20 PRESEN T Indicates that an external reference signal has been detected Table 3-1 VSG -401 Front Panel C ontrols (Continued) Key Label Description C hapter 3 Operation 22 C opyright 2011, H arris C orporation Front Panel Selections The VSG -401 unit show s data on the display screen. It displays the current output selections for the test generator. A n illustration of the display is show n in Figure 3-1. The display varies, depending on the choice of display m ode. Selecting a Function To directly select specific functions for the display Press the appropriate function button. For this product, the tw elve buttons on the right of the unit can be used to hot key into the m enus. W hen a button is pressed that cannot be used w ith a selected function, the m essage FU N C TIO N N O T A LLO W ED briefly appears over the center of the display. To lock or unlock a front panel Press and hold the Lock button. Status Display This is the m ain display of the unit, w hich is used to indicate the current configuration of the VSG -401. Status inform ation is displayed as show n in Figure 3-2 and Figure 3-3. U se the D ow n arrow to access the second status page. U se the U p arrow to access the first status page. To view status Status inform ation w ill be displayed as the default display show n in Figure 3-2. U se the Down arrow to access the second status page. U se the Up arrow to access the first status page from the second status page. VSG -401 Installation and Operation Manual 23 C opyright 2011, H arris C orporation Figure 3-2 Page 1 of Status D isplay Table 3-2 Status D isplay Page 1 Inform ation D escriptions Key Description 1 The output test pattern 2 The output video form at 3 The output video fram e rate 4 A udio G roup enables A check m ark indicates the audio group is enabled A n X m ark indicates that the audio group is disabled 5 The selected audio frequency 6 The selected audio am plitude 7 The state of the m otion function 8 The state of the source ID function 9 The state of the VBIT function 10 The text "V2A " w ill appear indicating that the V2A tim ing m ode is enabled C hapter 3 Operation 24 C opyright 2011, H arris C orporation Figure 3-3 Page 2 of Status D isplay * N ote - These values are only valid w hen the unit is in G enlock m ode and the unit is locked Table 3-3 Status D isplay Page 2 Inform ation D escriptions Key Description 1 The current tim ing pixel offset (The conversion to m icroseconds follow s the pixel indication) * 2 The current reference form at* 3 The current tim ing line offset* 4 The current tim ing fram e offset* 5 The sync out user selection 6 The A ES output 2 configuration 1 3 4 5 6 2 VSG -401 Installation and Operation Manual 25 C opyright 2011, H arris C orporation Quick Start Table 3-4 lists various com m on tasks you w ill w ant to do w ith your VSG -401. Table 3-4 VSG -401 Q uick Start List Task Action O utput C olor Bars Press and release the BA RS button. O utput a non-C olor Bar Pattern Press and release the PTRN button. Enable pattern m otion Press and release the M O VE button. C hange the output video form at 1. Press and hold the FM T button. 2. C hoose a form at from the list. 3. Press EN T to save your change. C hange the output video fram e rate 1. Press and hold the RATE button. 2. C hoose a fram e rate from the list. 3. Press EN T to save your change. Turn on the source identifier overlay Press and release the ID button. Enable or disable audio groups 1. Press and hold the G RP button. 2. C hoose an audio group from the list. 3. Press EN T to save your change. C hange the audio frequency 1. Press and hold the FREQ button. 2. C hoose an audio frequency from the list. 3. Press EN T to save your change. C hange the audio am plitude 1. Press and hold the A M P button. 2. C hoose an am plitude from the list. 3. Press EN T to save your change. Enable external reference Press and release the REF button. C hange the reference tim ing 1. Press and hold either the H or V buttons. 2. C hoose a tim ing standard from the list. 3. Press EN T to save your change. C onfigure the VSG -401 Press and release the SETU P button. Exit setup m ode Press and release the EXIT button. C hapter 3 Operation 26 C opyright 2011, H arris C orporation Accessing and Navigating the Setup Menu To access the global Setup menu Press the SETUP button. The Setup m enu selections are displayed as show n in Figure 3-4. Figure 3-4 Setup D isplay To directly access specific function setup menus Press and hold the corresponding function button. To display the pertinent Setup menu Press and hold the function button or press the Setup button and then navigate through the m enu selections. To navigate the Setup menu U se the navigation buttons. The navigation buttons are described in Table 4-1 on page 31. For m ore inform ation on the global Setup m enu, see Chapter 4, Setup Menu Functions. Table 3-5 Setup M enu D etails Key Description 1 U p/D ow n directional m arker (Show s the possible navigation selection using the N A VIG A TIO N buttons) 2 M ain m enu nam e 3 Subm enu level num ber 4 Subm enu num ber 5 N um ber of subm enus under m ain m enu item 6 Subm enu nam e 7 Left/Right directional m arker (Show s the possible navigation selection using the N A VIG A TIO N buttons) 1 2 3 4 5 6 7 VSG -401 Installation and Operation Manual 27 C opyright 2011, H arris C orporation Genlocking the Unit The front panel REF button toggles internal and external G enlock m odes. External G enlock is indicated through the H igh Tally REF button and illum inated front panel G EN LO C K indicator. If the VSG -401 is to be G enlocked, a stable reference should be connected to the REF IN back panel BN C connector and term inated. The VSG -401 w ill autom atically detect the video standard of the applied reference. If a valid reference signal is detected, the front panel PRESEN T indicator w ill illum inate. W hen the unit is genlocked, both the SYN C O utputs and SD I outputs rem ain in tim e relative to the REF IN . This is indicated by the green LED in the front panel LO C K STATU S group illum inating. W hen locked, tim ing adjustm ents can be applied using the Tim ing O ffset Setup m enu. Tim ing adjustm ents are determ ined from the REF IN video characteristics and retained separately for each reference video standard. The red LO C K STATU S LED illum inates to indicate an invalid lock com bination. Table 3-6 Supported G enlock C om binations 1080 Reference Inputs = Supported SDI Output Format External Ref erence Format 1 0 8 0 p 6 0 1 0 8 0 p 5 9 . 9 4 1 0 8 0 p 5 0 1 0 8 0 p 3 0 1 0 8 0 p 2 9 . 9 7 1 0 8 0 p 2 5 1 0 8 0 p 2 4 1 0 8 0 p 2 3 . 9 8 1 0 8 0 p 3 0 s f 1 0 8 0 p 2 9 . 9 7 s f 1 0 8 0 p 2 5 s f 1 0 8 0 p 2 4 s f 1 0 8 0 p 2 3 . 9 8 s f 1 0 8 0 i 6 0 1 0 8 0 i 5 9 . 9 4 1 0 8 0 i 5 0 1080p60 1080p59.94 1080p50
625/50 525/59.94 Table 3-7 Supported G enlock C om binations 720/PA L/N TSC Reference Inputs = Supported External Ref erence Format SDI Output Format 7 2 0 p 6 0 7 2 0 p 5 9 . 9 4 7 2 0 p 5 0 7 2 0 p 3 0 7 2 0 p 2 9 . 9 7 7 2 0 p 2 5 7 2 0 p 2 4 7 2 0 p 2 3 . 9 8 N T S C P A L 1080p60 1080p59.94 1080p50
D L 1080p60 D L 1080p59.94 D L 1080p50
1080p30 1080p29.97 Table 3-6 Supported G enlock C om binations 1080 Reference Inputs (Continued) = Supported SDI Output Format External Ref erence Format 1 0 8 0 p 6 0 1 0 8 0 p 5 9 . 9 4 1 0 8 0 p 5 0 1 0 8 0 p 3 0 1 0 8 0 p 2 9 . 9 7 1 0 8 0 p 2 5 1 0 8 0 p 2 4 1 0 8 0 p 2 3 . 9 8 1 0 8 0 p 3 0 s f 1 0 8 0 p 2 9 . 9 7 s f 1 0 8 0 p 2 5 s f 1 0 8 0 p 2 4 s f 1 0 8 0 p 2 3 . 9 8 s f 1 0 8 0 i 6 0 1 0 8 0 i 5 9 . 9 4 1 0 8 0 i 5 0 VSG -401 Installation and Operation Manual 29 C opyright 2011, H arris C orporation V2A Timing Mode The V2A Tim ing M ode enables the VSG -401 to generate video and audio test signals that can be used to detect any tim e propagation difference that m ight occur in the video and audio paths. The analyzer tool can be the H arris TVM & VTM series w ith V2A and audio options, X75H D , X85 or sim ilar product. To use the V2A Tim ing Test Tool, configure the VSG -401 so that it outputs the V2A Timing test pattern. 1080p25 1080p24 1080p23.98
625/50 525/59.94 Table 3-7 Supported G enlock C om binations 720/PA L/N TSC Reference Inputs (Continued) = Supported External Ref erence Format SDI Output Format 7 2 0 p 6 0 7 2 0 p 5 9 . 9 4 7 2 0 p 5 0 7 2 0 p 3 0 7 2 0 p 2 9 . 9 7 7 2 0 p 2 5 7 2 0 p 2 4 7 2 0 p 2 3 . 9 8 N T S C P A L C hapter 3 Operation 30 C opyright 2011, H arris C orporation W hen the VSG -401 is in V2A Tim ing M ode, the characteristics of the unit are fixed as follow s: The output test pattern w ill be 75% color bars The A udio output frequency w ill be set to 2000 H z w ith a gain of -9 dBFS A udio output G roup 1 w ill be forced on The O SD w ill be forced on and w ill display V2A Timing Enabled V2A w ill appear on the last line of the prim ary status display Configuring the VSG-401 for V2A Timing mode: 1 Press the SETUP button on the VSG -401 front panel. 2 Press the Right arrow button to enter the SDI OUT Setup m enu. 3 Press the Down arrow button until the Pattern m enu is show n, and then press the ENT button to enter the subm enu. 4 Press the Up/Down arrow button until the V2A Tim ing selection option is show n. 5 Press the ENT button to select the option. 6 Press the EXIT button to exit all m enus. 7 Press the PTRN button to use the selected pattern. 31 C opyright 2011, H arris C orporation 4 Setup Menu Functions The setup position navigation buttons are described in Table 4-1. See Figure 3-1 on page 20 for the location of these buttons. To access the global Setup menu Press the SETUP button. To navigate the Setup menu U se the SETUP, UP, DOWN, LEFT, RIGHT, ENT, and EXIT buttons. The available button selection w ill be indicated by a high talley navigation button. Table 4-1 Setup Button Functions Button Function Press to exit the Setup m enu. Press to enter or exit the Setup m enu. Press to select a m enu item , or open a m enu or subm enu. Press to m ove up in a m enu or subm enu tree. Press to m ove right to the next subm enu. Press to m ove out of a subm enu. Press to m ove dow n in a m enu or subm enu. C hapter 4 Setup Menu Functions 32 C opyright 2011, H arris C orporation Setup Menus and Alarm Tables The follow ing tables m ake up the global setup m enu. A n asterisk (*) is show n next to the default m enu selections. The Setup m enu item s are listed in Table 4-2 w ith their corresponding Table and D escription location pages. SDI Out Setup Menu Menu Selections Table 4-2 Setup M enu Tables Selection Page SD I O ut Page 32 A udio O ut Page 35 Sync O ut Page 36 Tim ing O ffset Page 36 TC Insertion Page 38 U nit C onfiguration Page 39 A bout Page 40 Table 4-3 SD I O ut Setup M enu Selections Selection Option Selection Option Selection Option C olor Bars 100% C olor Bars 75% C olor Bars * RP-219 w ith +I RP-219 w ith -I RP-219 100% W hite RP-219 75% W hite SM PTE Bars Patterns C heck Field * 4:3 in 16: 9 C ircle C o-Sited Pulse C ross H atch Flat Field 0% Flat Field 50% Flat Field 100% Red Field Visible Field VSG -401 Installation and Operation Manual 33 C opyright 2011, H arris C orporation Line Sw eep 100% M ultiburst M ultiburst Y only Pulse Bar Lim it Ram p Shallow Ram p Ram p Y only 5 Step Y only Zone Plate V2A Tim ing Video Form at 3 G bps D L 1080p 1080p 1080psf 1080i * 720p 625 525 Fram e Rate 3 G bps 60 59.94 * 50 D L 1080p 60 59.94 * 50 1080p 30 * 29.97 25 24 23.98 1080psf 30sF 29.97sF * 25sF 24sF 23.98sF Table 4-3 SD I O ut Setup M enu Selections (Continued) Selection Option Selection Option Selection Option C hapter 4 Setup Menu Functions 34 C opyright 2011, H arris C orporation Menu Selection Descriptions Color Bars: U sed to select the color bar output pattern. Selections include 100% C olor Bars, 75% C olor Bars (default), RP-219 w ith +1, RP-219 w ith -1, RP-219 100% W hite, RP-219 75% W hite, and SM PTE Bars. Patterns: U sed to select w hich non-color bar pattern to output; options include C heck Field (w hich is the default), 4:3 in 16: 9, C ircle 16x9, C ircle 4X3, C o-Sited Pulse, C ross H atch, Flat Field 0% , Flat Field 50% , Flat Field 100% , Red Field, Visible Field, Line Sw eep 100% , M ultiburst 100% , M ultiburst Y O nly, Pulse Bar, Lim it Ram p, Shallow Ram p, Ram p Y O nly, 5 Step Y O nly, Zone Plate, and V2A Tim ing. NOTE: When V2A is enabled, the source ID is forced on and V2A ENABLED is displayed. Video Format: M any of these form ats have subsequent output video fram e rate options. 3 Gbps: O ptions include 60, 59.94 *, and 50. DL 1080p: O ptions include 60, 59.94 *, and 50. 1080p: O ptions include 30*, 29.97, 25, 24, and 23.98. 1080psf: O ptions include 30sF, 29.97sF*, 25sF, 24sF, and 23.98sF. 1080i: O ptions include 60, 59.94 *, and 50. 720p: O ptions include 60, 59.94 *, 50, 30, 29.97, 24, and 23.98 (w ith sub-option 3G bps). 625: The only option is 50. 1080i * 60 59.94 * 50 720p 60 59.94 * 50 30 29.97 24 23.98 625 50 525 59.94 Pattern M ovem ent Slow M ed * Fast Source ID D ialog to Enter Src ID (default -- H A RRIS VSG -401 Table 4-3 SD I O ut Setup M enu Selections (Continued) Selection Option Selection Option Selection Option VSG -401 Installation and Operation Manual 35 C opyright 2011, H arris C orporation 525: The only option is 59.94. Note: Pattern and Bars selections are stored and recalled by format and selected changes in the format may change the selected pattern or bar output. Pattern Movement: U sed to set the speed associated w ith the pattern m ovem ent feature. Enabling or disabling pattern m ovem ent is done directly from the front panel M O VE button. Selections include Slow , M edium , and Fast. Source ID: This selection opens a dialog w here you can enter the Source ID . Audio Out Setup Menu Menu Selections Table 4-4 A udio O ut Setup M enu Selection Option Selection Option Selection Option G roup A udio G roup 1 O ff O n * A udio G roup 2 O ff * O n A udio G roup 3 O ff * O n A udio G roup 4 O ff * O n Frequency 400 H z 1 kH z * 10 kH z A m plitude 0 dBFS -9 dBFS -12 dBFS -18 dBFS -20 dBFS * Silence A ES O utput 2 A ES * D A RS W ord C lock VBIT O ff O n * C hapter 4 Setup Menu Functions 36 C opyright 2011, H arris C orporation Menu Selection Descriptions Group: Turns on and off each of the four audio groups. A ll audio groups are on by default. Frequency: U sed to select the audio output frequency. Selections are 400 H z, 1 kH z *, and 10 kH z. Amplitude: U sed to select the audio output am plitude. M easured in dBFS, options are 0, -9, -12, -18, -20, and silence. AES Output 2: U sed to configure the function of the second A ES output. Selections are A ES *, D A RS, and W ord C lock. VBIT: U sed to enable or disable the A ES validity bit. This can be set to O ff or O n *. Sync Out Setup Menu This selection is used to configure the sync output video form at. Menu Selections Menu Selection Descriptions Follow SDI Output: The sync outputs w ill follow the selected video output form at. NOTE: When Follow SDI output is enabled, selecting HD formats will select Tri level Sync on the sync outputs, and selecting SD formats will select Black Burst on the sync outputs. Follow Ext. Ref *: The sync outputs w ill follow the external reference form at Black Burst PAL: The sync output w ill set to 625 Black Burst. Black Burst NTSC: The sync output w ill be set to 525 black burst. Table 4-5 Sync O ut Setup M enu Selections Selection Option Selection Option Selection Option Follow SD I O utput Follow Ext. Ref * Black Burst PA L Black Burst N TSC VSG -401 Installation and Operation Manual 37 C opyright 2011, H arris C orporation Timing Offset Setup Menu
Figure 4-1 O ffset Setup M enu D isplay Note: The Timing Offset Setup menu is available only when a valid format is detected by the EXT REF input. Table 4-6 Status D isplay Page 2 Inform ation D escriptions Key Description 1 Reference form at 2 The horizontal pixel offset is 0 plus or m inus the available range for the reference form at. (The conversion to m icroseconds appears directly below the offset.) 3 The vertical line offset is 0 to the available range for the reference form at. 4 The fram e offset is dependent on the input reference form at. N TSC is +/- 1, PA L is +/- 2 fram es. 5 H old EN T to set all offsets to 0. 3 4 5 1 2 C hapter 4 Setup Menu Functions 38 C opyright 2011, H arris C orporation TC Insertion Setup Menu The TC Insertion m enu allow s you to configure tim ecode insertion. The tim ecode source is from the LTC /G PI D -Sub connector (see appendix A ). Menu Selections Menu Selection Descriptions VITC (SYNC) Enable: This selection enables VITC tim ecode insertion to the SYN C O U T. To change this selection, press the front panel EN T button. The default is disabled. ANC (SD/HD) Enable: This selection enables A N C tim ecode insertion to the SD I A /B. To change this selection, press the front panel EN T button. The default is disabled. DVITC (SD) Enable: This selection enables D VITC tim ecode insertion in SD form ats to the SD I A /B. To change this selection, press the front panel EN T button. The default is disabled. NTSC/525 Line 1: This selects the N TSC line for the line 1 tim ecode insertion. This value is used for both VITC and D VITC . The range of N TSC /525 Line 1 is 10 to 30. The default is 14. NTSC/525 Line 2: This selects the N TSC line for the line 2 tim ecode insertion. This value is used for both VITC and D VITC . The range of N TSC /525 Line 2 is 10 to 30. The default is 16. PAL/625 Line 1: This selects the PA L line for the line 1 tim ecode insertion. This value is used for both VITC and D VITC . The range of PA L/625 is 6 to 30. The default is 14. PAL/625 Line 2: This selects the PA L line for the line 2 tim ecode insertion. This value is used for both VITC and D VITC . The range of PA L/625 is 6 to 30. The default is 16. Table 4-7 TC Insertion M enu Selections Selection Option Selection Option Selection Option VITC (SYN C ) Enable Enable D isable* A N C (SD /H D ) Enable Enable D isable* D VITC (SD ) Enable Enable D isable* N TSC /525 Line 1 10-30, 14* N TSC /525 Line 2 10-30, 16* PA L/625 Line 1 6-30, 14* PA L/625 Line 2 6-30, 16* VSG -401 Installation and Operation Manual 39 C opyright 2011, H arris C orporation Unit Configuration Setup Menu Menu Selections Menu Selection Descriptions Front Panel: This selection is used to raise or low er the brightness levels of the front panel function buttons. High Tally: This selection is used to set the brightness of the H igh Tally state. The range of button contrast is 35% to 100% . The default selection is 80% . Low Tally: This selection allow s for setting the brightness of the buttons in a low tally state. The range of brightness is 0% to 10% . The default selection is 5% . GPIO: This selection is used to enable general purpose inputs/outputs. Input 1: This selection enables the use of G PIO input 1. Selections include N o action or Select C olor Bar output. Input 2: This selection enables the use of G PIO input 2. Selections include N o action or Select Pattern output. Input 3: This selection enables the use of G PIO input 3. Selections include N o action or select G enlock Internal/External. Input 4: This selection enables the use of G PIO input 4. Selections include N o action or select Source ID O n/O ff. Table 4-8 U nit C onfiguration Setup M enu Selections Selection Option Selection Option Selection Option Front Panel H igh Tally 35% to 100% (80% *) Low Tally 5% to 10% (5% *) G PIO Input 1 N o A ction Select C olor Bar output* Input 2 N o A ction Select Pattern output* Input 3 N o A ction G enlock Int/Ext* Input 4 N o A ction Source ID O n/O ff* IP D H C P C ontrol O ff * O n IP A ddress Subnet M ask G atew ay A ddresses Front Panel Lock O ff* O n System Tim e YYYY/M M /D D H H :M M C hapter 4 Setup Menu Functions 40 C opyright 2011, H arris C orporation IP: This selection is used to configure the VSG -401 for Ethernet com m unication. The Ethernet interface provides a high-speed com m unication link to the third party applications (such as w eb brow ser) over standard LA N and Internet netw orks. The interface conform s to industry Ethernet standards: C onnection via a standard RJ45 socket A utom atic detection and sw itching betw een 10Base-T and 100Base-T TC P/IP stack is fully com pliant w ith RFC 2500, Internet O fficial Protocol Standards Fully com pliant w ith IEEE 802.3 Ethernet standard The interface can accept a static IP address, or it can obtain an IP address dynam ically from a D H C P server. The IP A ddress, Subnet M ask, G atew ay A ddress, D H C P enable, and Port are program m able from the unit's Ethernet Setup m enu. The settings are perform ed in the IP C onfiguration screen. DHCP Control: The D ynam ic H ost C onfiguration Protocol (D H C P) function is used to have the VSG -401 autom atically configure an IP A ddress, Subnet M ask, and G atew ay every tim e the unit is pow ered on. The IP A ddress is dynam ic and could change each tim e the VSG -401 is pow ered on. D H C P Enable is set to O FF by default. IP Address: The IP A ddress is used to select a static IP address (unless D H C P w ill be used). The IP address m ust not be the sam e address as another instrum ent or PC on the netw ork. N etw ork conflicts w ill occur if tw o devices have the sam e IP address. See the System A dm inistrator to determ ine a static IP address that w ill avoid conflicts. Subnet Mask: The Subnet M ask is used to configure the Subnet M ask on a netw ork if D H C P is not enabled. If D H C P is not used to autom atically detect the Subnet M ask on a netw ork, the Subnet M ask m ust be m anually configured. U nlike the IP address, the Subnet M ask m ust be the sam e Subnet M ask as the netw ork Subnet M ask. See the System A dm inistrator to determ ine the Subnet M ask. Gateway: The G atew ay is the netw ork address that provides access to an outside netw ork. U se the G atew ay subm enu to configure the G atew ay on a netw ork if D H C P is not enabled. If D H C P is not used to autom atically detect the G atew ay on a netw ork, the G atew ay m ust be m anually configured. U nlike the IP address, the G atew ay m ust be the sam e G atew ay address as the netw ork G atew ay address. See the System A dm inistrator to determ ine the G atew ay address. Front Panel Lock: This selection is used to enable the front panel auto lock function. If enabled, the front panel w ill autom atically lock after 30 seconds of no front panel activity. System Time: This selection allow s the setup of the clock display's date and tim e. About Menu This selection allow s the display of the A bout screen (see Figure 4-2). Menu Selections Table 4-9 A bout M enu Selection Option M odel N um ber Serial N um ber VSG -401 Installation and Operation Manual 41 C opyright 2011, H arris C orporation Menu Selection Descriptions The A bout screen contains inform ation specific to the VSG -401, such as m odel, serial num ber, options, revision levels, IP address, and M A C address. Figure 4-2 A bout D isplay Screen To enter the About Menu selection display 1 Press Setup, and then press the Up or Down navigation button until A bout is displayed. 2 Press ENT. Figure 4-3 Setup A bout D isplay To navigate the About menu selection information Press the Up or Down navigation button. To exit the About display screen Press the Setup or the Exit button. O ptions Front Panel Rev. Firm w are Rev. FPG A Rev. C PLD Rev. PC B Rev. Q t Rev. File System Rev. O S Rev. Boot Rev. M A C A ddress IP A ddress Table 4-9 A bout M enu (Continued) Selection Option C hapter 4 Setup Menu Functions 42 C opyright 2011, H arris C orporation 43 C opyright 2011, H arris C orporation 5 External Control Browser Interface The w ebsite for each unit is accessed by pointing the w eb brow ser at the VSG -401 IP address. Before the default w eb screen appears, a user ID and passw ord m ust be entered. U ser ID : admin Passw ord: Harris O nce the user ID and passw ord have been entered, the w eb page appears, show ing a list of captures that have been stored in the VSG -401s internal m em ory. U se the w eb page to view the files or save them to disk. A sam ple w eb page is show n in Figure 5-1. Figure 5-1 Sam ple W eb Rem ote D isplay Microsoft Internet Explorer version 6 or later is the recommended browser. The user ID admin is the default user ID and Harris is the default password. These are set at the factory but can be changed by the user via the Accounts web page. Keep in mind, though that once the user ID and password have been changed, the only way to reset the unit to the default user ID and its default password is to send the unit back to the factory for repairs. C hapter 5 External Control 44 C opyright 2011, H arris C orporation A cross the top of the display is a series of buttons that allow access to the various external control functions available to a user. The Accounts button accesses the user account m anagem ent display. See page 47 for an explanation of this display. The RCU button accesses the w eb-based control panel display. See page 44 for an explanation of this display. The About button accesses inform ation specific to the VSG -401, such as m odel, serial num ber, options, revision levels, IP address, and M A C address. It also allow s a user to dow nload current VSG -401 firm w are and/or unlock VSG -401 options. See page 47 for an explanation of this display. The Log Out button allow s a user to exit the external control function. Accessing the Web-Based Control Panel A ccess the w eb brow ser as described on page 43. W hen the rem ote display page opens, click the RCU button to access the w eb-based control panel. Figure 5-2 W eb-Based C ontrol Panel The w eb-based VSG -401 control panel operates identically to a physical VSG -401 control panel. Refer to Chapter 3, Operation for m ore inform ation about panel operation. The Accounts, RCU, About, and Log Out control buttons are displayed across the top of each display. The user can click on one of these buttons to access the appropriate display or function. The VSG-401 unit allows access to one controller at a time. If the unit receives a request for another Web RCU session while previously established control session exists, the request will be granted after the previously established session is terminated. A Web RCU session that was terminated due to conflict with another control session can be re-established by repeating the logon procedure. VSG -401 Installation and Operation Manual 45 C opyright 2011, H arris C orporation Managing User Accounts The VSG -401 allow s user accounts to be added or edited at the U ser, System , or A dm inistrator levels. Both U ser and System level accounts are allow ed general control of the unit. O nly A ccounts at the A dm inistrator level can m anage accounts. Adding Accounts To add a new user account 1 C lick the Accounts button on the w eb-based control panel. The A ccounts D isplay page opens. Figure 5-3 A ccounts D isplay Page 2 In the Add new account(s) box, enter the follow ing inform ation: A unique identifier for the new account in the U ser ID text box. A passw ord for the new account (confirm the passw ord by entering it again in the Confirm Password text box). A n access level of U ser, System , or A dm inistrator from the Access Level drop-dow n list box. 3 C lick Save to accept the new account, or click Reset to clear the previously entered inform ation and start again. C hapter 5 External Control 46 C opyright 2011, H arris C orporation Editing Accounts To edit password and access level information 1 C lick the Accounts button on the w eb-based control panel. The A ccounts D isplay page opens. 2 In the Edit/Delete existing account(s) box, locate the unique identifier in the U ser ID text box for the account to be edited. 3 C hange one or m ore of the follow ing fields as appropriate: C hange a passw ord for the existing account by entering a new passw ord in the New Password text box. C onfirm the passw ord by entering it again in the Confirm Password text box. C hange the user access level by m aking a different selection at the Access Level drop-dow n list box. 4 C lick Save to accept the account changes, or click Reset to restore the original inform ation and start again. Deleting Accounts To delete a user account 1 C lick the Accounts button on the w eb-based control panel. The A ccounts D isplay page opens. 2 In the Edit/Delete existing account(s) box, locate the unique identifier in the U ser ID text box for the account to be deleted. 3 C lick the Delete check box to the right of the account to be deleted. 4 C lick Save. The account is deleted. VSG -401 Installation and Operation Manual 47 C opyright 2011, H arris C orporation Accessing the About Page The A bout screen contains inform ation specific to the VSG -401, such as m odel, serial num ber, options, revision levels, IP address, and M A C address. C lick the About button on the w eb-based control panel to access the w eb page containing the devices data. The A bout display page opens. Figure 5-4 A bout D isplay Page To update the VSG-401 firmware 1 D ow nload the latest firm w are from the H arris C ustom er Support w ebsite (http://support.broadcast.harris.com /) 2 N avigate to the dow nload location of the VSG -401_rXXXX.flu FLU file. 3 O nce the file has been selected, click the Update button to begin the update. C hapter 5 External Control 48 C opyright 2011, H arris C orporation 4 W hen the update is com plete, the unit w ill autom atically pow er off or restart. A fter the update has com pleted, a flash update log file can be retrieved through the w eb interface. 5 Verify that the firm w are revision level retrieved from the About m enu m atches the dow nloaded firm w are revision. To unlock an option NOTE: at the time of this printing no options were available for the VSG-401. 1 Enter the supplied 9-digit num ber in the Enter U pgrade Key field in the U nlock O ptions box. 2 Press the Upgrade button to start the feature upgrade. A m essage on the U nit display indicates the upgrade status. 3 O nce the update is com plete, the unit w ill autom atically pow er off. 4 Press the pow er button and w ait for the unit to pow er-up. 5 Verify that the option now appears in the About m enu. 6 A ttach the supplied serial num ber to the U nit. 49 C opyright 2011, H arris C orporation 6 Troubleshooting Initial Checks If the VSG -401 is not functioning properly, first verify the follow ing: The VSG -401 is connected to a pow er source (11-17 VD C ). A ll cables are correctly connected (see Connecting the VSG-401 on page 16). Initial difficulties w ith operation or display can be due to im proper setup. Review the Setup m enus (see Setup Menu Functions on page 31) to ensure that the proper adjustm ents have been m ade for the signal requirem ents. Restarting If a problem persists after the cables are correctly connected and the unit is set up, restart the unit by doing the follow ing: 1 Push and hold the SETUP and V buttons for a m inim um of five seconds until the SYSTEM RESET m essage appears on the display. 2 Press and hold the ENT button to reset the units configuration. A ll front panel and Setup m enu selections w ill be reset to the factory default settings. CAUTION: These instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform this installation or any servicing unless you are qualified to do so. Refer all servicing to qualified service personnel. C hapter 6 Troubleshooting 50 C opyright 2011, H arris C orporation Problems, Causes, and Solutions If the problem still exists after troubleshooting the VSG -401, see VSG-401 Service and Support on page 12 for further instructions. Table 6-1 VSG -401: Problem s, C auses, and Solutions Problem/Symptom Solution or Explanation There are no com m unications on the Ethernet port. Verify the netw ork settings through the Setup m enu. N o audio is present on the A ES outputs. The audio output groups m ay be m uted. U pon pow er-up the output characteristics are different from w hat they w ere w hen the unit pow ered-dow n. The unit saves all output settings 30 seconds after the last user change. The test pattern output changes w hen the Video Form at is changed. Pattern and Bars selections are stored and recalled by Video Form at. 51 C opyright 2011, H arris C orporation 7 Specifications Genlock Input Outputs Specifications are subject to change without notice. Table 7-1 G enlock Input Specifications Item Specif ication Input Type 1 input, passive looping Input C onnector Type Electrical, single-ended, unbalanced, m echanical, BN C Input Im pedance H i-Z Blackburst Input A m plitude N TSC : sync and burst 286 m V, nom inal PA L: sync and burst 300 m V, nom inal Blackburst Input A m plitude Tolerance 6 dB Return Loss 40 dB to 10 M H z Lock Range 6 ppm (N TSC Fsc 21 H z, PA L Fsc 26 H z) Black Burst Subcarrier Jitter <1 ns (pk-pk) over one horizontal line Tri-Level Sync A m plitude 600 m V pk-pk nom inal Tri-Level Sync A m plitude Tolerance ? 3 dB Table 7-2 Blackburst/Tri-Level Sync (TLS) Specifications Item Specif ication N um ber/C onnector Type 2 BN C , fem ale Load Im pedance 75 nom inal Return Loss 40 dB (100 kH z to 10 M H z) Blackburst Signal Level N TSC : sync and burst 286 m V, nom inal PA L: sync and burst 300 m V, nom inal Blackburst Subcarrier Jitter <1 ns (pk-pk) over one horizontal line C hapter 7 Specifications 52 C opyright 2011, H arris C orporation Tri-Level Signal Level 600 m V pk-pk D C O ffset 0 V .5 V SC /H Phase 0 o 10 o Reference to O utput Tim ing 100 ns Table 7-3 G eneral SD I O utput C haracteristics Item Specif ication N um ber of O utputs 4 O utput C onnector Type BN C , fem ale O utput Im pedance 75 nom inal Table 7-4 3G /H D /SD -SD I O utput C haracteristics Item Specif ication O utput Return Loss (5 M H z to 1.485 G H z) -15 dB (1.485 to 3 G H z) -10 dB O utput Signal Level 800 m V 10% O utput D C O ffset 0 V 0.5 V O utput Rise and Fall Tim e (@ 2.97 G H z) <135 ps (20 to 80% am plitude), not differing by m ore than 50 ps (@ 1.484 G H z) <270 ps (20 to 80% am plitude), not differing by m ore than 100 ps (@ 270M hz) 400 to 700 ps (20 to 80% am plitude), not differing by m ore than 500 ps Jitter (O nly m eaningful w ith a H igh Pass frequency stated) (@ 2.97 G H z): <0.3U I (@ 1.484 G H z): <0.2 U I (@ 270M H z): <0.2 U I Table 7-5 Video O utput Specifications Item Specif ication O utput Form ats 3G /H D /SD /D L, selectable Supported Form ats 1080i/60, 1080i/59.94, 1080i/50; 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98; 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25, 720p/24, 720p/23.98 Table 7-2 Blackburst/Tri-Level Sync (TLS) Specifications Item Specif ication VSG -401 Installation and Operatoin Manual 53 C opyright 2011, H arris C orporation Audio Embedded Audio Segm ented Fram e 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF D ual Link (per SM PTE 372M ) 4:2:2 (YC BC R) 10-bit, 1080p/60, 1080p/59.94, 1080p/50 3G -SD I 1080p: 60 H z, 59.94 H z, 50 H z (4:2:2 YC bC r/10-bit) SD -SD I 525 at 59.94 H z 625 at 50 H z Table 7-5 Video O utput Specifications (Continued) Item Specif ication Table 7-6 A udio Specifications Item Specif ication A udio Form ats A ES or D A RS, unbalanced Sam ple Rate 48 kH z O utput Im pedance 75 O utput C onnector 2 BN C A ES O utput Return Loss -25 dB -0.1 to 6 M H z O utput Signal Level 1 V pk-pk (75 term inated) A ES Jitter 0.25 U I Table 7-7 W ord C lock O utput C haracteristics Item Specif ication O utput C onnector 1 BN C , fem ale, shared w ith A ES/D A RS O utput Im pedance 75 nom inal O utput Level 5 V TTL levels w ith 75 load Table 7-8 Em bedded A udio Specifications Item Specif ication O utput Sam ple Rate A ES, 48 kH z O utput Level 0, -9, -12, -20 dBFS and silence, user-selectable O utput Frequency Fixed selections of 400 H z, 1 kH z, and 10 kH z C hapter 7 Specifications 54 C opyright 2011, H arris C orporation Display Communication Interfaces LTC Input Ethernet Table 7-9 D isplay Specifications Item Specif ication G eneral 25664 O LED display for device configuration and output selections Table 7-10 C om m unication Interfaces Item Specif ication Ethernet 1 Ethernet port RJ-45 10/100 Base-T connector LTC /G PIO 1 LTC /G PIO connector 15 fem ale pin D -sub Table 7-11 LTC Input Item Specif ication N om inal Input A m plitude 2.0 volts pk-pk M in. Input A m plitude 0.5 volts pk-pk M ax. Input A m plitude 4.5 volts pk-pk Table 7-12 Ethernet Specifications Item Specif ication Standard 10/100 Base-T conform s to IEEE802.3 C onnector RJ-45 Perform ance m etric Transfer a dow nloaded file to a PC in 30 seconds, dedicated LA N VSG -401 Installation and Operatoin Manual 55 C opyright 2011, H arris C orporation Power Requirements Mechanical Environmental Table 7-13 Pow er Requirem ents Item Specif ication Pow er connector 15 VD C nom inal 11 VD C m inim um , 18 VD C m axim um Pow er consum ption 10 W nom inal O ver-voltage protection +50 VD C nom inal N on-resetting fuse 2A , 72 VD C A C A dapter Included Table 7-14 M echanical Specifications Item Specif ication H eight 1.75 in. (4.45 cm ) W idth 8.5 in. (21.59 cm ) D epth 6.60 in. (16.76 cm ) W eight 1.66 lbs (0.753 kg) Table 7-15 Environm ental Specifications Item Specif ication O perating Tem perature 32 to 122 F (0 to 50 C ) Storage Tem perature -22 to 149 F (-30 to 65 C ) H um idity (non-condensing) O perating: 20% to 80% N on-operating: 5% to 90% A ltitude O perating: 6562 ft (2000 m ) Transportation 24.00 in. (60.96 cm ) im pact drop survivable in original factory packaging Pollution degree Pollution degree 2 C hapter 7 Specifications 56 C opyright 2011, H arris C orporation Applicable Standards SM PTE RP 184-2004, SM PTE RP 165-1994, SM PTE RP 219, SM PTE 259M , SM PTE 272M , SM PTE 274M -2005, SM PTE 291M , SM PTE 292M -2006, SM PTE 295M , SM PTE 296M , SM PTE 299M , SM PTE 318M , SM PTE 352M , SM PTE 372M , SM PTE 424M , SM PTE 425M A B, SM PTE RP 184-2004, SM PTE RP 165-1994, SM PTE RP 219, SM PTE 318M , A ES3.2003, A ES11.2003 Standard and Optional Accessories Table 7-16 Standard A ccessories Item Specif ication Standard accessories VSG-401 Installation and Operation Manual on C D H ardw are Kit, G PI D sub O ne pow er cord O ne pow er supply assem bly Table 7-17 O ptional A ccessories Item Specif ication TM -W RTY-1YR Test and M easurem ent one year w arranty extension. Extends the standard w arranty by one year. Excludes LC D s, C RTs and batteries TM -W RTY-3YR Test and M easurem ent three year w arranty extension. Extends the standard w arranty by three years. Excludes LC D s, C RTs and batteries BLK-4 Blank panel for D RT-4 D RT-4 D ouble rack m ount case PTC -4 Portable case w ith tilt stand 57 C opyright 2011, H arris C orporation A VSG-401 Pinouts LTC/GPI D-Sub Connector Figure A-1 LTC /G PI 15-Pin, Fem ale, D -Sub C onnector Table A-1 Pinouts for LTC /G PI C onnector Pinout Signal Pinout Signal 1 ERRO R SU M 9 LTC G N D 2 G PI IN 1 10 LTC + 3 G PI IN 2 11 LTC - 4 G PI IN 3 12 N /C 5 G PI IN 4 13 G N D 6 ERRO R SU M RETU RN 14 N /C 7 G N D 15 G N D 8 G N D A ppendix A VSG-401 Pinouts 58 C opyright 2011, H arris C orporation Ethernet RJ45 Connector Figure A-2 Ethernet RJ45 C onnector Power Connector Figure A-3 Pow er C onnector Table A-2 Ethernet RJ45 C onnector Pinouts Pinout Signal Pinout Signal 1 TX+ 5 N .C . 2 TX- 6 RX- 3 RX+ 7 N .C . 4 N .C . 8 N .C . Table A-3 Pow er C onnector Pinouts Pinout Signal Pinout Signal 1 G N D 3 N .C . 2 N .C . 4 Pow er 59 C opyright 2011, H arris C orporation B Glossary 601. A n international standard (ITU -R BT.601) for com ponent digital television. It defines the sam pling system s, m atrix values, and filter characteristics for digital television. 8 VSB. Vestigial sideband m odulation w ith 8 discrete am plitude levels. 16 VSB. Vestigial sideband m odulation w ith 16 discrete am plitude levels. Advanced Television Systems Committee (ATSC). The parent organization that developed, tested and described the form and function of the U S digital television form ats. AES/EBU. A digital audio standard established jointly by the A udio Engineering Society (A ES) and the European Broadcasting U nion (EBU ). Anchor Element. The perceptual loudness reference point or elem ent around w hich other elem ents are balanced in producing the final m ix of the content, or that a reasonable view er w ould focus on w hen setting the volum e control. Artifacts. U nw anted visible effects in the picture created by disturbances in the transm ission or im age processing, such as edge craw l or hanging dotsin analog pictures, or pixilationin digital pictures. Aspect Ratio. The ratio of horizontal to vertical dim ensions. A square has an aspect of 1:1 since the horizontal and vertical m easurem ents are alw ays equal. C urrent television screen aspect ratios are 4:3 and 16:9. Asynchronous Serial Interface (ASI). A transm ission m ethod adopted by the D VB, and called D VB-A SI. The transm ission m ethod allow s for the transport of varying data payloads in a constant data stream . The D VB-A SI transport stream rate is 270 M b/s. Audio Breakaway. Routing video and accom panying audio in separate signal paths. Audio-Follow. Routing video and accom panying audio together in the sam e signal path. Auto Trans. A utom atic transition; the execution of a single w ipe or fade from current picture to another picture by w ay of an autom atic device. Bandwidth. The range of frequencies used to transm it inform ation such as picture and sound. Baseband Video. A n unm odulated video signal. Black. A lso color black, blackburst. A com posite color video signal that has the com posite sync, reference burst, and a black video signal. A ppendix B Glossary 60 C opyright 2011, H arris C orporation Blanking Processor. A circuit w hich rem oves sync, burst and blanking from the program video and then replaces it w ith sync, burst and blanking from the reference input. The process ensures constant sync and burst levels on program video. Border. A n electronically-generated picture m em ber w hich is used in w ipes to separate the tw o video sources used in the w ipe. It is of even thickness and has color produced by the m atte generator. Broadcast Legal. Encoding video signal param eters to conform to prescribed lim its for broadcast. Encoding rules vary by N TSC , PA L, country and broadcast facility. BTSC. Broadcast Television Standards C om m ittee. A U S standard for stereo audio encoding in N TSC broadcast television. CAV. C om ponent A nalog Video CDP. C aption D istribution Packet CES. C onsecutive Errored Sam ples Composite Video. A single video signal that includes all color video and tim ing inform ation. A com posite signal includes lum inance, chrom inance, blanking pulses, sync pulses and color burst inform ation. Chrominance. The color portion of a video signal that represents the saturation and hue. Black, gray and w hite have no chrom inance; color signals have both chrom inance and lum inance. CH. C hrom a Chrominance/Luminance Delay. A m easurem ent that indicates the am ount to w hich chrom inance and lum inance are aligned w ith respect to each other. A low C /L delay figure can m inim ize the effects of ghosts or color offset on the received picture. C/L Delay. C hrom inance/Lum inance D elay Clipping. The electronic process of shearing off the peaks of either the w hite or black excursions of a video signal for lim iting purposes. C lipping is often perform ed prior to m odulation to lim it the signal. CMRR. C om m on M ode Rejection Ratio Color Burst. The portion of a color video signal w hich contains a short sam ple of the color subcarrier. It is used as a color synchronization signal to establish a reference for the color inform ation follow ing it and is used by a color m onitor to decode the color portion of a video signal. The color burst acts as both am plitude and phase reference for color hue and intensity. The color oscillator of a color television receiver is phase locked to the color burst. Composite Sync. A signal consisting of horizontal sync pulses, vertical sync pulses and equalizing pulses only. CRC. C yclical Redundancy C heck Crosspoint. A n electronic sw itch, usually controlled by a button on the panel. C ontrol logic w ill allow for only one crosspoint, for each bus, to be sw itched O N on at a tim e. VSG -401 Installation and Operation Manual 61 C opyright 2011, H arris C orporation D/A. C onversion of digital to analog signals. DA. D istribution A m plifier dBTP. D ecibels relative to nom inal 100% , true-peak Data Element. A n item of data as represented before encoding and after decoding. Decoded Stream. The decoded reconstruction of a com pressed bit stream . Decibel (dB). A logarithm ic m easure of the ratio betw een tw o pow ers, voltages, currents, sound intensities, etc. Signal-to-noise ratios are expressed in decibels. Default. A factory preset value or condition. Demodulator. A receiver, such as for television broadcast, cable, and closed circuit applications. A TV dem odulator receives and processes off-air or cable RF signals and provides baseband video and audio outputs. DHCP. D ynam ic H ost C onfiguration Protocol. Dialnorm. A n A C -3 m etadata param eter, num erically equal to the absolute value of the D ialog Level, carried in the A C -3 bit stream . Dialog Level. The loudness, in LKFS units, of the A nchor Elem ent. Differential Gain. A m easurem ent that specifies how m uch the chrom inance gain is affected by the lum inance level. Expressed as a percentage show ing the largest am plitude change betw een any tw o levels, it indicates how m uch color saturation variance occurs w hen the lum inance level changes. Differential Phase. A peak-to-peak m easurem ent that specifies the extent to w hich the chrom inance phase is affected by the lum inance level. Expressed in degrees of subcarrier phase, it indicates how m uch hue shift occurs w ith lum inance level changes. Digital Video Broadcasting (DVB). A specific project office of the European Broadcast U nion. This group has produced a set of digital broadcasting standards. DSK. D ow n Stream Key, a keyer w hich is electronically located after (or dow n stream from ) all other functions of a sw itcher. The key resulting w ill appear to be on top of all other pictures from the sw itcher. Duration. D uration is used to determ ine how long an error m ust persist before it is reported. Setting the duration to 0 causes an error to be displayed as soon as the C ES value is m et. DVITC, D-VITC. D igital Vertical Interval Tim e C ode. Tim ecode inform ation stored on specific lines in the vertical blanking interval of a television signal. EAV. End of A ctive Video in com ponent digital system s. EBU. European Broadcasting U nion Editor. A device or system w hich controls video tape recorders, video sw itchers, and other related devices in order to electronically splice segm ents of recorded video into a finished production. A ppendix B Glossary 62 C opyright 2011, H arris C orporation EDH. Error D etection and H andling. A recom m ended practice defined in SM PTE RP 165. A system to generate and then detect video data errors in serial digital video system s. Effects Keyer. A keyer w hich is electronically located in the m ix/w ipe generator portion of a sw itcher. The resulting key w ould appear under the dow n stream key. EIA Rack Space or Unit. A specific size as designated by the Electronics Industry A ssociation. The rack unit is 19 inches w ide, and is 1.75 inches tall. A device w hich requires 3 EIA rack units is 19 inches w ide and 5.25 inches (3x1.75 = 5.25) tall. Elementary Stream (ES). A generic term for one of the coded video, audio or other variable length bit stream s w hich are packetized to form M PEG -2 transport stream s. C onsists of com pressed data from a single source (audio, video, data, etc.). O ne elem entary stream is carried in a sequence of PES packets w ith one and only one stream ID . Embedded Audio. D igital audio inform ation m ultiplexed onto a serial digital data stream . U p to sixteen channels can be m ultiplexed on a single stream of 601 video, m inim izing cabling and routing requirem ent. ENG. Electronic N ew s G athering Encoded Clip Softness. In the encoded legalization process, softness,as applied to encoded clips, refers to the processing of the video at the point of the clip. The clips are applied in YC bC r color space. The clip point is either an im m ediate lim it (no softness) or w ill have a range of values leading to the clip point, all reduced to sm ooth the clip point to a less im m ediate lim it (softness). Encoded Legalization. Lim iting of the lum inance and color difference signals such that, once encoded into a com posite video signal, the resultant encoded video does not violate the m axim um or m inim um signal levels as defined by the specific encoding rules. N TSC and PA L video plus various users of these types of video have m any varied rules for m axim um and m inim um encoding lim its. Encoded legalization usually calculates first the encoded lum inance value and then the corresponding chrom a value to m ake legalization judgem ents. Encoded Video. A com bined single video signal that is constructed from either separate G RB or lum inance and tw o color difference video signals. N TSC , PA L, and SEC A M are all exam ples of encoded video. Envelope Detection. A n RF signal detection technique that does not respond to phase variations in the carrier signal, enabling m easurem ent of a transm itters incidental phase. W hen used together w ith synchronous detection, envelope detection helps isolate either video and/or RF as the causes of phase distortion. External Key Input. This is an alternate source for key cut. This is usually a separate external input to a sw itcher Fade-thru-Black. A production technique w hich is a tw o step process. The first step w ill fade the program video to black. The second step w ill fade from black to the video selected on the preview bus. This is usually used in m ajor scene transitions. Fade-to-Black. A production technique w hich sim ply fades the program video to black and program audio to silent. This is used to end program s and to escape from em barrassing pictures or sounds. VSG -401 Installation and Operation Manual 63 C opyright 2011, H arris C orporation Field. A picture or picture portion w hich is produced w ithin one cycle of vertical synchronization. In interlaced system s, a full picture or fram e requires tw o consecutive fields. FM Trap. A circuit designed to m inim ize potential interference from strong FM signals in receiving equipm ent, such as a TV dem odulator. For exam ple, an FM trap can attenuate signals betw een 88-108 M H z to reduce interference on N TSC television channel 6. Frame. A single full resolution picture as view ed in either a video or film system . In the case of interlaced video, tw o consecutive fields provide all of the inform ation of one fram e. In non-interlaced system s, one cycle of vertical synchronization produces a fram e. A 60 H z interlaced system , produces 30 fram es of video in one second. A 60 H z progressive (or non-interlaced) system , produces 60 fram es of video in one second. C om m on fram e rates are 24 (film ) 25, 29.97, 30, 50, 59.94 and 60. Frame Synchronizer. A n electronic device that synchronizes tw o or m ore video signals. U sing one input as a reference, it locks a second signal to the reference. Frame Store. A n electronic m ethod of capturing and storing a single fram e of video. Gamma. This term applies to the linearity of the change from black to w hite. G am m a controls adjust the gray or 50% point of the video either up or dow n, w ith the effect of changing the gray level of the video. Gamut. The w hole or total of w hatever is being addressed. In color space, gam ut refers to all colors w hich are included in a particularly defined color group, such as 601 gam ut. Genlock (Generator Lock). A m ethod of synchronization involving the generation of a video signal that is tim e and phase locked w ith another signal. GPI. G eneral Purpose Interface Headend. In a cable TV system , the facilities w here program sources (satellite, terrestrial, VTR, local) are received and rem odulated for distribution through a cable plant. High Definition Television (HDTV). H igh definition television has a resolution of approxim ately tw ice that of conventional television in both the horizontal (H ) and vertical (V) dim ensions and a picture aspect ratio (H to V) of 16:9. High Level. A range of allow ed picture param eters defined by the M PEG -2 video coding specification w hich corresponds to high definition television. HRC. H arm onically-Related C arrier Hue. C olor tint ICPM. Incidental C arrier Phase M odulation. A m easurem ent of picture carrier phase distortion (affected by the video signal level) that occurs in the transm itter. Installation Categories. C ategories of m easurem ents that occur on circuits attached or not attached to a live electrical supply outlet. Installation C ategories are as follow s: C ategory I is for m easurem ents that occur on circuits not attached to a live electrical supply outlet (115/230 VA C ). The voltages com e from secondary pow er sources. The secondary pow er source includes circuits energized by low -voltage sources and electronics such as batteries. A ppendix B Glossary 64 C opyright 2011, H arris C orporation C ategory II is for m easurem ents that occur on circuits attached to a live electrical supply outlet (115/230 VA C ). C ategory III is for m easurem ents that occur on equipm ent perm anently connected to the building. The distribution level equipm ent are usually fixed installations and circuit breakers. C ategory IV is for m easurem ents that occur at the m ain electrical pow er supply. IP. Internet Protocol IRC. Increm entally-Related C arrier I.R.E. Refers to the Institute of Radio Engineers, and is used as a unit of m easurem ent. In N TSC television, 1 volt of signal equals 140 IRE units. ISP. Internet Service Provider Jitter. A deform ation of a signal affected by poor synchronization. Key. A n effect in television w here a selected portion of background video is rem oved and replaced w ith another video. Key Cut. In a key effect, this is the video w hich designates the portion of background video w hich is rem oved. Key Fill. In a key effect, this is the video w hich is used to replace the portion of background video w hich w as rem oved. This m ay be the sam e video as the Key C ut video. Key Invert. In a key effect, this is an electronic action w hich reverses the polarity of the key cut signal. It m akes black appear as w hite, and w hite appear as black. Key Mask. In a key effect, it uses a w ipe pattern from the w ipe pattern generator to restrict the key cut from rem oving video in a portion of the screen. This requires the use of the w ipe pattern generator and the M ask/Preset Size controls. Key Source. A nother term w hich is the sam e as key cut. Legalization. The m odification of serial digital video to conform to analog color space rules, as required by users. LCD. Liquid C rystal D isplay LED. Light-Em itting D iode LFE. Low Frequency Effects Lissajous. A display of the am plitude and phase relationships betw een tw o input signals. LKFS. Loudness, K w eighted, relative to nom inal full scale. The LKFS unit is equivalent to a decibel in that an increase in the level of a signal by 1 dB w ill cause the loudness reading to increase by 1LKFS. A unit of LKFS is equivalent to a decibel. If a 0 dB full-scale 1 kH z sine w ave is input applied to the left, centre, or right channel input, the indicated loudness w ill equal -3.01 LKFS. The w eighting coefficients are different for each channel. LS. Left Surround VSG -401 Installation and Operation Manual 65 C opyright 2011, H arris C orporation LTC. Longitudinal Tim e C ode, A SM PTE tim ecode standard usually recorded onto the linear audio track of a VTR. LU. Loudness U nit. The loudness unit is the scale unit of the loudness m eter. The value of the program in loudness units represents the loss or gain (dB) that is required to bring the program to 0 LU , e.g. a program that reads -10 LU w ill require 10 dB of gain to bring that program up to a reading of 0 LU . (From BS.1771) LUFS. Loudness unit, referenced to Full Scale. (This is the EBU recom m ended unit; equivalent to LKFS.) Luminance. The degree of brightness (black and w hite portion of the video signal) at any given point in the video im age. A video signal is com prised of lum inance, chrom inance and sync. If lum inance is high, the picture is bright and if low the picture is dark. C hanging the chrom inance does not affect the brightness of the picture. Main Level. A range of allow ed picture param eters defined by the M PEG -2 video coding specification w ith m axim um resolution equivalent to standard definition television. Main Profile. A subset of the syntax of the M PEG -2 video coding specification that is supported over a large range of applications. A pplications include, M P@ H L (M ain profile at high level) and M P@ M L (M ain profile at m ain level). Mask/Preset Size. U ses the w ipe pattern generator in the keyer portion of the effects generator. This is used to adjust the size of a preset pattern or for adjusting the size of a m ask to block a portion of the key cut (source) from use in the keyer. Matte Generator. A n internal generator w hich can m ake any color, is used for border color and m ay be used for key fill. It is identical to the C olor Background G enerator, but sim ply used in other areas of the sw itcher. Mbps. M egabits Per Second mV. M illivolts M/E. M ix/Effects System MP@HL. M ain profile at high level MP@ML. M ain profile at m ain level MPEG. Refers to standards developed by the ISO /IEC JTC 1/SC 29 W G 11, M oving Picture Experts G roup. MPEG-2. Refers to ISO /IEC standards 13818-1 (System s), 13818-2 (Video), 13818-3 (A udio), and 13818-4 (C om pliance). Multi-Level Effects. A pplies to any effects generator w hich can do m ore than one effect at a tim e. Typically, a m ulti level sw itcher can produce a Key and a Background transition in the sam e effects generator at one tim e. NTSC. N ational Television System s C om m ittee, the color television system used in the U nited States, C anada, M exico and Japan. NVRAM. N onvolatile RA M A ppendix B Glossary 66 C opyright 2011, H arris C orporation OLED. O rganic light-em itting diode; a graphical color display for use as television screens, com puter displays, portable system screens, and in advertising and inform ation board applications Packet Identifier (PID). A unique integer value used to associate elem entary stream s of a program in a single or m ulti-program transport stream . Packet. A packet consists of a header follow ed by a num ber of contiguous bytes from an elem entary data stream . It is a layer in the system coding syntax. Packetized Elementary Stream (PES). The data structure used to carry elem entary stream data. The packets consist of a header follow ed by payload data, and a stream is a series of packets w hich form an elem entary stream and have a single stream identification. PAL. Phase A lternation Line; the standard color television system in m any European and other countries. Passive Looping. Video and audio signals routed through com ponents, even if pow er is rem oved. Signals are not am plified or processed, m aintaining transparency. Pedestal Level. A n offset used in a video system to separate the active video from the blanking level by m aintaining the black level above the blanking level by a sm all am ount. Pixel. A Picture cell or Picture elem ent representing one sam ple of picture inform ation, such as an individual sam ple of R, G , B, lum inance or chrom inance. Pollution Degree. A m easurem ent of the foreign m aterials such as conductive dust, gas, and m oisture betw een the internal areas of the product and the outside environm ent. Pollution D egrees are 1,2 3, and 4. Pollution D egree 1 describes conditions w here no pollution occurs or only dry, nonconductive pollution occurs. This is norm al for equipm ent located in clean room s. The pollution classified under Pollution D egree 1 has no environm ental influence. Pollution D egree 2 describes conditions w here dry, nonconductive pollution occurs. This is norm al in an office environm ent. Tem porary conductivity caused by condensation m ay occur w hen the unit is not in service. Pollution D egree 3 describes conditions w here conductive pollution occurs, or dry, nonconductive pollution occurs due to condensation. Room s that cannot m aintain the m oisture or tem perature fall into this category. The location can only protect from outside w eather conditions such as direct sunlight, rain, snow , and w ind. Industrial areas can fall under Pollution D egree 3. Pollution D egree 4 describes pollution that generates persistent conductivity through conductive dust, rain, or snow . Pollution D egree 4 is for outdoor locations. Preset. Refers to establishing any condition prior to use on the Program output. This term is used in reference to w ipe patterns and is often interchanged w ith Preview . Preview. The video output channel used to view the intended Program results prior to the execution of the next transition. PRO Audio. A transm itted audio channel for talent cueing via Interrupt Foldback (IFB) to EN G vans and rem ote applications. Som e dem odulators support PRO audio m onitoring. VSG -401 Installation and Operation Manual 67 C opyright 2011, H arris C orporation Program. A transport stream com bination of a video stream and one or m ore audio and data stream s associated w ith that video stream . In analog term s, Program refers to the Base Band video and audio produced by the final output of a sw itcher. Program Association Table (PAT). A list of all program s that are in the ATSC data stream . Program Map Table (PMT). A listing of all elem entary stream s that com prise a com plete (television) program . Program Clock Reference (PCR). This is a tim e reference signal that is placed in M PEG stream s for the purpose of tim e coordinating various data stream s. Program and System Information Protocol (PSIP). Inform ation sent out as part of an ATSC transport stream w hich lists all of the video, audio, data and program inform ation contained in the stream . This is the TV guidefor a given stream . Progressive Scanning. A lso non-interlaced. A system of video scanning w here lines of a picture are transm itted consecutively, such as w ith VG A m onitor displays. Push-push Toggle Switch. A n electro-m echanical device w hich, w hen pushed, alternates the condition of the sw itch. Push once, its off, push again, its on. Quadrature Output. A n output in a television dem odulator used for m easuring Incidental C arrier Phase M odulation (IC PM ) in a transm itter. QPSK. Q uadrature Phase Shift Keying, typically used by satellite dow nlinks. QAM. Q uadrature A m plitude M odulation, the technique used by cable TV system s (64-Q A M and 256-Q A M ) to rem odulate signals for distribution in a cable plant. GRB Legalization. Lim iting of lum inance and color difference video signals such that, once transcoded into G RB com ponent video signals, the resultant video does not violate the m axim um or m inim um signal levels as defined by com ponent video level rules. Typically, the m axim um value for R, G , or B is 700 m V, and the absolute m inim um value for any of these signals is 0 m V. Reclocking. The process of regenerating digital data w ith a clock recovered from the input data. Resolution. A m easure of the finest detail that can be seen, or resolved, in a reproduced im age. RS. Right Surround RS-422. Recom m ended Standard num ber 422, an E.I.A . standard w hich describes a type of data interchange. Television products use this standard as its com m unication form at betw een the electronics fram e and editors, control panel and com puters. A n RS-422 line m ay be extended up to 1,000 feet (304m ). Sampling. Process by w hich an analog signal is sam pled to convert the analog signal to digital. SAP. Secondary A udio Program , used in television broadcast for second language broadcasting, sim ulcasting, and separate audio program m ing. Saturation. C olor intensity A ppendix B Glossary 68 C opyright 2011, H arris C orporation SAW Filter. Surface A coustic W ave filter Segment Error Rate (SER). A calculated average of uncorrected transport stream packets vs. total packets as accum ulated over a designated period of tim e. Sensitivity. Sensitivity is set by C onsecutive Errored Sam ples (C ES). W hen setting am plitude lim its, a noise spike can exceed the lim it w hile the video am plitude can be w ithin the lim it. W ith the C ES set to a low num ber, a spike is detected and an alarm is displayed. Set the C ES to a higher num ber to ignore the fast spike. Each C ES occurs at 37ns intervals for SD and 13.5ns for H D . U se this as a guideline to select the appropriate C ES value. N ot all alarm s have C ES associated w ith them ; in such cases, use the duration to increase or decrease the general sensitivity. Signal to Noise Ratio -Analog (SNR). A m easurem ent of the noise level in a signal expressed in dB (decibels) as a ratio of betw een the audio or video signals m axim um peak-to-peak signal voltage and the m easured voltage of noise present w hen the signal is rem oved. H igher SN R figures indicate that any noise introduced by system com ponents w ill not be perceived in the picture and sound output signals. Signal to Noise Ratio-8VSB (SNR). A s applies to 8VSB transm issions, this is a calculated average pow er of the ideal signal divided by the actual dem odulated signal pow er. SMPTE. Society of M otion Picture and Television Engineers Standard Definition Television (SDTV). This term is used to signify a digital television system in w hich the quality is approxim ately equivalent to that of N TSC . This equivalent quality m ay be achieved from pictures originated at the 4:2:2 level of ITU -R BT.601 and subjected to processing as part of the bit rate com pression. The results should be such that w hen judged across a representative sam ple of program m aterial, subjective equivalence w ith N TSC is achieved. The displayed picture m ay be either the traditional 4:3 or the w ide-screen 16:9 aspect ratio. STL. Studio Transm itter Link Synchronous Detection. A com m on detection technique used in television dem odulators that rem oves quadrature distortion, enabling com parison of transm itter output w ith video input signal. S-Video. A lso Y/C . Transm its lum inance and color portions separately via m ultiple w ires, thus avoiding the color encoding process and resulting loss of picture quality. Tally. A system used to light lam ps and indicate usage. M ost production sw itchers have an internal tally system to indicate selected functions, and w hich selected functions are currently involved w ith Program . TCP. Transm ission C ontrol Protocol Telecine. A device used to convert film to video; m ovie film is digitally sam pled and converted to video fram e by fram e in real-tim e. TCXO. Tem perature C om pensated C rystal O scillator THD. Total H arm onic D istortion TPL. True Peak Level VSG -401 Installation and Operation Manual 69 C opyright 2011, H arris C orporation Transport Stream-ATSC (TS). C onsists of the follow ing: (1) Packets: 188 bytes - fixed length w ith descriptive data, (2) C arries several program s, (3) has a PID w hich identifies the type of TS packet (video, audio, other), and (4) carries descriptive inform ation about the program . True Peak Level. The m axim um value of an audio signal w aveform in the continuous tim e dom ain. UHF. U ltra H igh Frequency Unity Gain. A n electronic term indicating that a signal w ill be neither am plified or attenuated. O ne volt of signal level in results in one volt of signal level out. Vector. A m easure that has tw o individual properties: m agnitude and direction. Vector Clip. A special encoded clip version that lim its only the C b and C r input video signals and does not affect (nor is it affected by) the lum inance com ponent. This color-only clip lim its the m axim um vector excursions as view ed in an encoded state and is intended for users w ho w ish to prevent encoded vectors from ever exceeding the perim eter circle of an encoded vector display. VHF. Very H igh Frequency VITC. Vertical Interval Tim e C ode, a m ethod for recording on to video tape the tim ecode address for each video fram e inserted in the vertical interval. Waveform. A visual representation of a signal in the shape of a w ave that plots am plitude versus tim e. White Level. The brightest part of a video signal, corresponding to approxim ately 1.0 Volt. White Balance. A n electronic process used to calibrate the picture for accurate color display in different lighting conditions. Wipe. A special effect in w hich tw o pictures from different video sources are displayed on one screen. Production sw itchers and special effects generators provide num erous w ipe patterns varying from sim ple horizontal and vertical w ipes to m ulti-shaped, m ulti-colored arrangem ents. XGA. H igh resolution 1024768 non-interlaced (progressive) display m onitor XVGA. Extended Video G raphics A dapter YPbPr. C AV form at com posed of lum inance (Y) and tw o color difference signals (Pb and Pr) Y/C. A lso S-video. D escribes the separation of video signal lum inance and chrom inance com ponents. Zero Carrier Pulse (chopper). In a TV dem odulator, rem oves the carrier in the vertical interval for a short period, enabling depth of field m easurem ent. A ppendix B Glossary 70 C opyright 2011, H arris C orporation 71 C opyright 2011, H arris C orporation C Open Source Software Copyright Information C opyright inform ation for certain O pen Source softw are products is provided below . Source code for all O pen Source softw are used in the developm ent of this product is available upon request (contact the H arris C ustom er Service D epartm ent). See VSG-401 Service and Support on page 12 for contact inform ation. FreeType License Portions of this softw are are copyright 2008 The FreeType Project (w w w .freetype.org). A ll rights reserved. LibJPEG License This softw are is based in part on the w ork of the Independent JPEG G roup. CMU/UCD Copyright Notice C opyright 1989, 1991, 1992 by C arnegie M ellon U niversity. D erivative W ork - 1996, 1998-2000. C opyright 1996, 1998-2000, The Regents of the U niversity of C alifornia. A ll rights reserved. Perm ission to use, copy, m odify and distribute this softw are and its docum entation for any purpose and w ithout fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this perm ission notice appear in supporting docum entation, and that the nam e of C M U and The Regents of the U niversity of C alifornia not be used in advertising or publicity pertaining to distribution of the softw are w ithout specific w ritten perm ission. A ppendix C Open Source Software Copyright Information 72 C opyright 2011, H arris C orporation C M U A N D TH E REG EN TS O F TH E U N IVERSITY O F C A LIFO RN IA D ISC LA IM A LL W A RRA N TIES W ITH REG A RD TO TH IS SO FTW A RE, IN C LU D IN G A LL IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS. IN N O EVEN T SH A LL C M U O R TH E REG EN TS O F TH E U N IVERSITY O F C A LIFO RN IA BE LIA BLE FO R A N Y SPEC IA L, IN D IREC T O R C O N SEQ U EN TIA L D A M A G ES O R A N Y D A M A G ES W H ATSO EVER RESU LTIN G FRO M TH E LO SS O F U SE, D ATA O R PRO FITS, W H ETH ER IN A N A C TIO N O F C O N TRA C T, N EG LIG EN C E O R O TH ER TO RTIO U S A C TIO N , A RISIN G O U T O F O R IN C O N N EC TIO N W ITH TH E U SE O R PERFO RM A N C E O F TH IS SO FTW A RE. Networks Associates Technology, Inc. Copyright Notice (BSD) C opyright 2001-2003, N etw orks A ssociates Technology, Inc. A ll rights reserved. Redistribution and use in source and binary form s, w ith or w ithout m odification, are perm itted provided that the follow ing conditions are m et: Redistributions of source code m ust retain the above copyright notice, this list of conditions and the follow ing disclaim er. Redistributions in binary form m ust reproduce the above copyright notice, this list of conditions and the follow ing disclaim er in the docum entation and/or other m aterials provided w ith the distribution. N either the nam e of the N etw orks A ssociates Technology, Inc. nor the nam es of its contributors m ay be used to endorse or prom ote products derived from this softw are w ithout specific prior w ritten perm ission. TH IS SO FTW A RE IS PRO VID ED BY TH E C O PYRIG H T H O LD ERS A N D C O N TRIBU TO RS A S IS A N D A N Y EXPRESS O R IM PLIED W A RRA N TIES, IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE A RE D ISC LA IM ED . IN N O EVEN T SH A LL TH E C O PYRIG H T H O LD ERS O R C O N TRIBU TO RS BE LIA BLE FO R A N Y D IREC T, IN D IREC T, IN C ID EN TA L, SPEC IA L, EXEM PLA RY, O R C O N SEQ U EN TIA L D A M A G ES (IN C LU D IN G , BU T N O T LIM ITED TO , PRO C U REM EN T O F SU BSTITU TE G O O D S O R SERVIC ES; LO SS O F U SE, D ATA , O R PRO FITS;O R BU SIN ESS IN TERRU PTIO N ) H O W EVER C A U SED A N D O N A N Y TH EO RY O F LIA BILITY,W H ETH ER IN C O N TRA C T, STRIC T LIA BILITY, O R TO RT (IN C LU D IN G N EG LIG EN C E O R O TH ERW ISE) A RISIN G IN A N Y W AY O U T O F TH E U SE O F TH IS SO FTW A RE, EVEN IF A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G E. Cambridge Broadband Ltd. Copyright Notice (BSD) Portions of this code are copyright 2001-2003, C am bridge Broadband Ltd. A ll rights reserved. Redistribution and use in source and binary form s, w ith or w ithout m odification, are perm itted provided that the follow ing conditions are m et: Redistributions of source code m ust retain the above copyright notice, this list of conditions and the follow ing disclaim er. Redistributions in binary form m ust reproduce the above copyright notice, this list of conditions and the follow ing disclaim er in the docum entation and/or other m aterials provided w ith the distribution. VSG -401 Installation and Operation Manual 73 C opyright 2011, H arris C orporation The nam e of C am bridge Broadband Ltd. m ay not be used to endorse or prom ote products derived from this softw are w ithout specific prior w ritten perm ission. TH IS SO FTW A RE IS PRO VID ED BY TH E C O PYRIG H T H O LD ER A S ISA N D A N Y EXPRESS O R IM PLIED W A RRA N TIES, IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE A RE D ISC LA IM ED . IN N O EVEN T SH A LL TH E C O PYRIG H T H O LD ER BE LIA BLE FO R A N Y D IREC T, IN D IREC T, IN C ID EN TA L, SPEC IA L, EXEM PLA RY, O R C O N SEQ U EN TIA L D A M A G ES (IN C LU D IN G , BU T N O T LIM ITED TO , PRO C U REM EN T O F SU BSTITU TE G O O D S O R SERVIC ES; LO SS O F U SE, D ATA , O R PRO FITS; O R BU SIN ESS IN TERRU PTIO N ) H O W EVER C A U SED A N D O N A N Y TH EO RY O F LIA BILITY, W H ETH ER IN C O N TRA C T, STRIC T LIA BILITY, O R TO RT (IN C LU D IN G N EG LIG EN C E O R O TH ERW ISE) A RISIN G IN A N Y W AY O U T O F TH E U SE O F TH IS SO FTW A RE, EVEN IF A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G E. Sun Microsystems, Inc. Copyright Notice (BSD) C opyright 2003 Sun M icrosystem s, Inc., 4150 N etw ork C ircle, Santa C lara, C alifornia 95054, U .S.A . A ll rights reserved. U se is subject to license term s below . This distribution m ay include m aterials developed by third parties. Sun, Sun M icrosystem s, the Sun logo and Solaris are tradem arks or registered tradem arks of Sun M icrosystem s, Inc. in the U .S. and other countries. Redistribution and use in source and binary form s, w ith or w ithout m odification, are perm itted provided that the follow ing conditions are m et: Redistributions of source code m ust retain the above copyright notice, this list of conditions and the follow ing disclaim er. Redistributions in binary form m ust reproduce the above copyright notice, this list of conditions and the follow ing disclaim er in the docum entation and/or other m aterials provided w ith the distribution. N either the nam e of the Sun M icrosystem s, Inc. nor the nam es of its contributors m ay be used to endorse or prom ote products derived from this softw are w ithout specific prior w ritten perm ission. TH IS SO FTW A RE IS PRO VID ED BY TH E C O PYRIG H T H O LD ERS A N D C O N TRIBU TO RS A S IS A N D A N Y EXPRESS O R IM PLIED W A RRA N TIES, IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE A RE D ISC LA IM ED . IN N O EVEN T SH A LL TH E C O PYRIG H T H O LD ERS O R C O N TRIBU TO RS BE LIA BLE FO R A N Y D IREC T, IN D IREC T, IN C ID EN TA L, SPEC IA L, EXEM PLA RY, O R C O N SEQ U EN TIA L D A M A G ES (IN C LU D IN G , BU T N O T LIM ITED TO , PRO C U REM EN T O F SU BSTITU TE G O O D S O R SERVIC ES; LO SS O F U SE, D ATA , O R PRO FITS; O R BU SIN ESS IN TERRU PTIO N ) H O W EVER C A U SED A N D O N A N Y TH EO RY O F LIA BILITY, W H ETH ER IN C O N TRA C T, STRIC T LIA BILITY, O R TO RT (IN C LU D IN G N EG LIG EN C E O R O TH ERW ISE) A RISIN G IN A N Y W AY O U T O F TH E U SE O F TH IS SO FTW A RE, EVEN IF A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G E. A ppendix C Open Source Software Copyright Information 74 C opyright 2011, H arris C orporation Sparta, Inc. Copyright Notice (BSD) C opyright 2003-2008, Sparta, Inc. A ll rights reserved. Redistribution and use in source and binary form s, w ith or w ithout m odification, are perm itted provided that the follow ing conditions are m et: Redistributions of source code m ust retain the above copyright notice, this list of conditions and the follow ing disclaim er. Redistributions in binary form m ust reproduce the above copyright notice, this list of conditions and the follow ing disclaim er in the docum entation and/or other m aterials provided w ith the distribution. N either the nam e of Sparta, Inc. nor the nam es of its contributors m ay be used to endorse or prom ote products derived from this softw are w ithout specific prior w ritten perm ission. TH IS SO FTW A RE IS PRO VID ED BY TH E C O PYRIG H T H O LD ERS A N D C O N TRIBU TO RS A S IS A N D A N Y EXPRESS O R IM PLIED W A RRA N TIES, IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE A RE D ISC LA IM ED . IN N O EVEN T SH A LL TH E C O PYRIG H T H O LD ERS O R C O N TRIBU TO RS BE LIA BLE FO R A N Y D IREC T, IN D IREC T, IN C ID EN TA L, SPEC IA L, EXEM PLA RY, O R C O N SEQ U EN TIA L D A M A G ES (IN C LU D IN G , BU T N O T LIM ITED TO , PRO C U REM EN T O F SU BSTITU TE G O O D S O R SERVIC ES; LO SS O F U SE, D ATA , O R PRO FITS; O R BU SIN ESS IN TERRU PTIO N ) H O W EVER C A U SED A N D O N A N Y TH EO RY O F LIA BILITY, W H ETH ER IN C O N TRA C T, STRIC T LIA BILITY, O R TO RT (IN C LU D IN G N EG LIG EN C E O R O TH ERW ISE) A RISIN G IN A N Y W AY O U T O F TH E U SE O F TH IS SO FTW A RE, EVEN IF A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G E. Cisco/BUPTNIC Copyright Notice (BSD) C opyright 2004, C isco, Inc and Inform ation N etw ork C enter of Beijing U niversity of Posts and Telecom m unications. A ll rights reserved. Redistribution and use in source and binary form s, w ith or w ithout m odification, are perm itted provided that the follow ing conditions are m et: Redistributions of source code m ust retain the above copyright notice, this list of conditions and the follow ing disclaim er. Redistributions in binary form m ust reproduce the above copyright notice, this list of conditions and the follow ing disclaim er in the docum entation and/or other m aterials provided w ith the distribution. N either the nam e of C isco, Inc, Beijing U niversity of Posts and Telecom m unications, nor the nam es of their contributors m ay be used to endorse or prom ote products derived from this softw are w ithout specific prior w ritten perm ission. TH IS SO FTW A RE IS PRO VID ED BY TH E C O PYRIG H T H O LD ERS A N D C O N TRIBU TO RS A S IS A N D A N Y EXPRESS O R IM PLIED W A RRA N TIES, IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE A RE D ISC LA IM ED . IN N O EVEN T SH A LL TH E C O PYRIG H T H O LD ERS O R C O N TRIBU TO RS BE LIA BLE FO R A N Y D IREC T, IN D IREC T, IN C ID EN TA L, SPEC IA L, EXEM PLA RY, O R C O N SEQ U EN TIA L VSG -401 Installation and Operation Manual 75 C opyright 2011, H arris C orporation D A M A G ES (IN C LU D IN G , BU T N O T LIM ITED TO , PRO C U REM EN T O F SU BSTITU TE G O O D S O R SERVIC ES; LO SS O F U SE, D ATA , O R PRO FITS; O R BU SIN ESS IN TERRU PTIO N ) H O W EVER C A U SED A N D O N A N Y TH EO RY O F LIA BILITY, W H ETH ER IN C O N TRA C T, STRIC T LIA BILITY, O R TO RT (IN C LU D IN G N EG LIG EN C E O R O TH ERW ISE) A RISIN G IN A N Y W AY O U T O F TH E U SE O F TH IS SO FTW A RE, EVEN IF A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G E. Fabasoft R&D Software GmbH & Co. KG Copyright Notice (BSD) C opyright Fabasoft R& D Softw are G m bH & C o. KG , 2003 oss@ fabasoft.com . A uthor: Bernhard Penz Redistribution and use in source and binary form s, w ith or w ithout m odification, are perm itted provided that the follow ing conditions are m et: Redistributions of source code m ust retain the above copyright notice, this list of conditions and the follow ing disclaim er. Redistributions in binary form m ust reproduce the above copyright notice, this list of conditions and the follow ing disclaim er in the docum entation and/or other m aterials provided w ith the distribution. The nam e of Fabasoft R& D Softw are G m bH & C o KG or any of its subsidiaries, brand or product nam es m ay not be used to endorse or prom ote products derived from this softw are w ithout specific prior w ritten perm ission. TH IS SO FTW A RE IS PRO VID ED BY TH E C O PYRIG H T H O LD ER ``A S IS'' A N D A N Y EXPRESS O R IM PLIED W A RRA N TIES, IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE A RE D ISC LA IM ED . IN N O EVEN T SH A LL TH E C O PYRIG H T H O LD ER BE LIA BLE FO R A N Y D IREC T, IN D IREC T, IN C ID EN TA L, SPEC IA L, EXEM PLA RY, O R C O N SEQ U EN TIA L D A M A G ES (IN C LU D IN G , BU T N O T LIM ITED TO , PRO C U REM EN T O F SU BSTITU TE G O O D S O R SERVIC ES; LO SS O F U SE, D ATA , O R PRO FITS; O R BU SIN ESS IN TERRU PTIO N ) H O W EVER C A U SED A N D O N A N Y TH EO RY O F LIA BILITY, W H ETH ER IN C O N TRA C T, STRIC T LIA BILITY, O R TO RT (IN C LU D IN G N EG LIG EN C E O R O TH ERW ISE) A RISIN G IN A N Y W AY O U T O F TH E U SE O F TH IS SO FTW A RE, EVEN IF A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G E. The GNU v2 License GNU General Public License Version 2, June 1991 C opyright 1989, 1991 Free Softw are Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, M A 02110-1301 U SA . Everyone is perm itted to copy and distribute verbatim copies of this license docum ent, but changing it is not allow ed. A ppendix C Open Source Software Copyright Information 76 C opyright 2011, H arris C orporation Preamble The licenses for m ost softw are are designed to take aw ay your freedom to share and change it. By contrast, the G N U G eneral Public License is intended to guarantee your freedom to share and change free softw are--to m ake sure the softw are is free for all its users. This G eneral Public License applies to m ost of the Free Softw are Foundation's softw are and to any other program w hose authors com m it to using it. (Som e other Free Softw are Foundation softw are is covered by the G N U Lesser G eneral Public License instead.) You can apply it to your program s, too. W hen w e speak of free softw are, w e are referring to freedom , not price. O ur G eneral Public Licenses are designed to m ake sure that you have the freedom to distribute copies of free softw are (and charge for this service if you w ish), that you receive source code or can get it if you w ant it, that you can change the softw are or use pieces of it in new free program s; and that you know you can do these things. To protect your rights, w e need to m ake restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the softw are, or if you m odify it. For exam ple, if you distribute copies of such a program , w hether gratis or for a fee, you m ust give the recipients all the rights that you have. You m ust m ake sure that they, too, receive or can get the source code. A nd you m ust show them these term s so they know their rights. W e protect your rights w ith tw o steps: (1) copyright the softw are, and (2) offer you this license w hich gives you legal perm ission to copy, distribute and/or m odify the softw are. A lso, for each author's protection and ours, w e w ant to m ake certain that everyone understands that there is no w arranty for this free softw are. If the softw are is m odified by som eone else and passed on, w e w ant its recipients to know that w hat they have is not the original, so that any problem s introduced by others w ill not reflect on the original authors reputations. Finally, any free program is threatened constantly by softw are patents. W e w ish to avoid the danger that redistributors of a free program w ill individually obtain patent licenses, in effect m aking the program proprietary. To prevent this, w e have m ade it clear that any patent m ust be licensed for everyone's free use or not licensed at all. The precise term s and conditions for copying, distribution and m odification follow . GNU General Public License Terms and Conditions for Copying, Distribution and Modification 0. This License applies to any program or other w ork w hich contains a notice placed by the copyright holder saying it m ay be distributed under the term s of this G eneral Public License. The Program ,below , refers to any such program or w ork, and a w ork based on the Program m eans either the Program or any derivative w ork under copyright law : that is to say, a w ork containing the Program or a portion of it, either verbatim or w ith m odifications and/or translated into another language. (H ereinafter, translation is included w ithout lim itation in the term m odification.) Each licensee is addressed as you. VSG -401 Installation and Operation Manual 77 C opyright 2011, H arris C orporation A ctivities other than copying, distribution and m odification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a w ork based on the Program (independent of having been m ade by running the Program ). W hether that is true depends on w hat the Program does. 1. You m ay copy and distribute verbatim copies of the Program 's source code as you receive it, in any m edium , provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaim er of w arranty; keep intact all the notices that refer to this License and to the absence of any w arranty; and give any other recipients of the Program a copy of this License along w ith the Program . You m ay charge a fee for the physical act of transferring a copy, and you m ay at your option offer w arranty protection in exchange for a fee. 2. You m ay m odify your copy or copies of the Program or any portion of it, thus form ing a w ork based on the Program , and copy and distribute such m odifications or w ork under the term s of Section 1 above, provided that you also m eet all of these conditions: a) You m ust cause the m odified files to carry prom inent notices stating that you changed the files and the date of any change. b) You m ust cause any w ork that you distribute or publish, that in w hole or in part contains or is derived from the Program or any part thereof, to be licensed as a w hole at no charge to all third parties under the term s of this License. c) If the m odified program norm ally reads com m ands interactively w hen run, you m ust cause it, w hen started running for such interactive use in the m ost ordinary w ay, to print or display an announcem ent including an appropriate copyright notice and a notice that there is no w arranty (or else, saying that you provide a w arranty) and that users m ay redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not norm ally print such an announcem ent, your w ork based on the Program is not required to print an announcem ent.) These requirem ents apply to the m odified w ork as a w hole. If identifiable sections of that w ork are not derived from the Program , and can be reasonably considered independent and separate w orks in them selves, then this License, and its term s, do not apply to those sections w hen you distribute them as separate w orks. But w hen you distribute the sam e sections as part of a w hole w hich is a w ork based on the Program , the distribution of the w hole m ust be on the term s of this License, w hose perm issions for other licensees extend to the entire w hole, and thus to each and every part regardless of w ho w rote it. Thus, it is not the intent of this section to claim rights or contest your rights to w ork w ritten entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective w orks based on the Program . In addition, m ere aggregation of another w ork not based on the Program w ith the Program (or w ith a w ork based on the Program ) on a volum e of a storage or distribution m edium does not bring the other w ork under the scope of this License. 3. You m ay copy and distribute the Program (or a w ork based on it, under Section 2) in object code or executable form under the term s of Sections 1 and 2 above provided that you also do one of the follow ing: a) A ccom pany it w ith the com plete corresponding m achine-readable source code, w hich m ust be distributed under the term s of Sections 1 and 2 above on a m edium custom arily used for softw are interchange; or, A ppendix C Open Source Software Copyright Information 78 C opyright 2011, H arris C orporation b) A ccom pany it w ith a w ritten offer, valid for at least three years, to give any third party, for a charge no m ore than your cost of physically perform ing source distribution, a com plete m achine-readable copy of the corresponding source code, to be distributed under the term s of Sections 1 and 2 above on a m edium custom arily used for softw are interchange; or, c) A ccom pany it w ith the inform ation you received as to the offer to distribute corresponding source code. (This alternative is allow ed only for noncom m ercial distribution and only if you received the program in object code or executable form w ith such an offer, in accord w ith Subsection b above.) The source code for a w ork m eans the preferred form of the w ork for m aking m odifications to it. For an executable w ork, com plete source code m eans all the source code for all m odules it contains, plus any associated interface definition files, plus the scripts used to control com pilation and installation of the executable. H ow ever, as a special exception, the source code distributed need not include anything that is norm ally distributed (in either source or binary form ) w ith the m ajor com ponents (com piler, kernel, and so on) of the operating system on w hich the executable runs, unless that com ponent itself accom panies the executable. If distribution of executable or object code is m ade by offering access to copy from a designated place, then offering equivalent access to copy the source code from the sam e place counts as distribution of the source code, even though third parties are not com pelled to copy the source along w ith the object code. 4. You m ay not copy, m odify, sublicense, or distribute the Program except as expressly provided under this License. A ny attem pt otherw ise to copy, m odify, sublicense or distribute the Program is void, and w ill autom atically term inate your rights under this License. H ow ever, parties w ho have received copies, or rights, from you under this License w ill not have their licenses term inated so long as such parties rem ain in full com pliance. 5. You are not required to accept this License, since you have not signed it. H ow ever, nothing else grants you perm ission to m odify or distribute the Program or its derivative w orks. These actions are prohibited by law if you do not accept this License. Therefore, by m odifying or distributing the Program (or any w ork based on the Program ), you indicate your acceptance of this License to do so, and all its term s and conditions for copying, distributing or m odifying the Program or w orks based on it. 6. Each tim e you redistribute the Program (or any w ork based on the Program ), the recipient autom atically receives a license from the original licensor to copy, distribute or m odify the Program subject to these term s and conditions. You m ay not im pose any further restrictions on the recipientsexercise of the rights granted herein. You are not responsible for enforcing com pliance by third parties to this License. 7. If, as a consequence of a court judgm ent or allegation of patent infringem ent or for any other reason (not lim ited to patent issues), conditions are im posed on you (w hether by court order, agreem ent or otherw ise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy sim ultaneously your obligations under this License and any other pertinent obligations, then as a consequence you m ay not distribute the Program at all. For exam ple, if a patent license w ould not perm it royalty-free redistribution of the Program by all those w ho receive copies directly or indirectly through you, then the only w ay you could satisfy both it and this License w ould be to refrain entirely from distribution of the Program . If any portion of this section is held invalid or unenforceable under any particular circum stance, the balance of the section is intended to apply and the section as a w hole is intended to apply in other circum stances. VSG -401 Installation and Operation Manual 79 C opyright 2011, H arris C orporation It is not the purpose of this section to induce you to infringe any patents or other property right claim s or to contest validity of any such claim s; this section has the sole purpose of protecting the integrity of the free softw are distribution system , w hich is im plem ented by public license practices. M any people have m ade generous contributions to the w ide range of softw are distributed through that system in reliance on consistent application of that system ; it is up to the author/donor to decide if he or she is w illing to distribute softw are through any other system and a licensee cannot im pose that choice. This section is intended to m ake thoroughly clear w hat is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder w ho places the Program under this License m ay add an explicit geographical distribution lim itation excluding those countries, so that distribution is perm itted only in or am ong countries not thus excluded. In such case, this License incorporates the lim itation as if w ritten in the body of this License. 9. The Free Softw are Foundation m ay publish revised and/or new versions of the G eneral Public License from tim e to tim e. Such new versions w ill be sim ilar in spirit to the present version, but m ay differ in detail to address new problem s or concerns. Each version is given a distinguishing version num ber. If the Program specifies a version num ber of this License w hich applies to it and any later version,you have the option of follow ing the term s and conditions either of that version or of any later version published by the Free Softw are Foundation. If the Program does not specify a version num ber of this License, you m ay choose any version ever published by the Free Softw are Foundation. 10. If you w ish to incorporate parts of the Program into other free program s w hose distribution conditions are different, w rite to the author to ask for perm ission. For softw are w hich is copyrighted by the Free Softw are Foundation, w rite to the Free Softw are Foundation; w e som etim es m ake exceptions for this. O ur decision w ill be guided by the tw o goals of preserving the free status of all derivatives of our free softw are and of prom oting the sharing and reuse of softw are generally. No Warranty 11. BEC A U SE TH E PRO G RA M IS LIC EN SED FREE O F C H A RG E, TH ERE IS N O W A RRA N TY FO R TH E PRO G RA M , TO TH E EXTEN T PERM ITTED BY A PPLIC A BLE LAW . EXC EPT W H EN O TH ERW ISE STATED IN W RITIN G TH E C O PYRIG H T H O LD ERS A N D /O R O TH ER PA RTIES PRO VID E TH E PRO G RA M A S ISW ITH O U T W A RRA N TY O F A N Y KIN D , EITH ER EXPRESSED O R IM PLIED , IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE. TH E EN TIRE RISK A S TO TH E Q U A LITY A N D PERFO RM A N C E O F TH E PRO G RA M IS W ITH YO U . SH O U LD TH E PRO G RA M PRO VE D EFEC TIVE, YO U A SSU M E TH E C O ST O F A LL N EC ESSA RY SERVIC IN G , REPA IR O R C O RREC TIO N . 12. IN N O EVEN T U N LESS REQ U IRED BY A PPLIC A BLE LAW O R A G REED TO IN W RITIN G W ILL A N Y C O PYRIG H T H O LD ER, O R A N Y O TH ER PA RTY W H O M AY M O D IFY A N D /O R RED ISTRIBU TE TH E PRO G RA M A S PERM ITTED A BO VE, BE LIA BLE TO YO U FO R D A M A G ES, IN C LU D IN G A N Y G EN ERA L, SPEC IA L, IN C ID EN TA L O R C O N SEQ U EN TIA L D A M A G ES A RISIN G O U T O F TH E U SE O R IN A BILITY TO U SE TH E PRO G RA M (IN C LU D IN G BU T N O T LIM ITED TO LO SS O F D ATA O R D ATA BEIN G REN D ERED IN A C C U RATE O R LO SSES SU STA IN ED BY YO U O R TH IRD PA RTIES O R A FA ILU RE O F TH E PRO G RA M TO O PERATE W ITH A N Y O TH ER PRO G RA M S), EVEN IF SU C H H O LD ER O R O TH ER PA RTY H A S BEEN A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G ES. A ppendix C Open Source Software Copyright Information 80 C opyright 2011, H arris C orporation EN D O F TERM S A N D C O N D ITIO N S GNU Lesser Public License GNU Lesser General Public License Version 2.1, February 1999 C opyright 1991, 1999 Free Softw are Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, M A 02110-1301 U SA . Everyone is perm itted to copy and distribute verbatim copies of this license docum ent, but changing it is not allow ed. [This is the first released version of the Lesser G PL. It also counts as the successor of the G N U Library Public License, version 2, hence the version num ber 2.1.] Preamble The licenses for m ost softw are are designed to take aw ay your freedom to share and change it. By contrast, the G N U G eneral Public Licenses are intended to guarantee your freedom to share and change free softw are--to m ake sure the softw are is free for all its users. This license, the Lesser G eneral Public License, applies to som e specially designated softw are packages--typically libraries--of the Free Softw are Foundation and other authors w ho decide to use it. You can use it too, but w e suggest you first think carefully about w hether this license or the ordinary G eneral Public License is the better strategy to use in any particular case, based on the explanations below . W hen w e speak of free softw are, w e are referring to freedom of use, not price. O ur G eneral Public Licenses are designed to m ake sure that you have the freedom to distribute copies of free softw are (and charge for this service if you w ish); that you receive source code or can get it if you w ant it; that you can change the softw are and use pieces of it in new free program s; and that you are inform ed that you can do these things. To protect your rights, w e need to m ake restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you m odify it. For exam ple, if you distribute copies of the library, w hether gratis or for a fee, you m ust give the recipients all the rights that w e gave you. You m ust m ake sure that they, too, receive or can get the source code. If you link other code w ith the library, you m ust provide com plete object files to the recipients, so that they can relink them w ith the library after m aking changes to the library and recom piling it. A nd you m ust show them these term s so they know their rights. W e protect your rights w ith a tw o-step m ethod: (1) w e copyright the library, and (2) w e offer you this license, w hich gives you legal perm ission to copy, distribute and/or m odify the library. VSG -401 Installation and Operation Manual 81 C opyright 2011, H arris C orporation To protect each distributor, w e w ant to m ake it very clear that there is no w arranty for the free library. A lso, if the library is m odified by som eone else and passed on, the recipients should know that w hat they have is not the original version, so that the original authors reputation w ill not be affected by problem s that m ight be introduced by others. Finally, softw are patents pose a constant threat to the existence of any free program . W e w ish to m ake sure that a com pany cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, w e insist that any patent license obtained for a version of the library m ust be consistent w ith the full freedom of use specified in this license. M ost G N U softw are, including som e libraries, is covered by the ordinary G N U G eneral Public License. This license, the G N U Lesser G eneral Public License, applies to certain designated libraries, and is quite different from the ordinary G eneral Public License. W e use this license for certain libraries in order to perm it linking those libraries into non-free program s. W hen a program is linked w ith a library, w hether statically or using a shared library, the com bination of the tw o is legally speaking a com bined w ork, a derivative of the original library. The ordinary G eneral Public License therefore perm its such linking only if the entire com bination fits its criteria of freedom . The Lesser G eneral Public License perm its m ore lax criteria for linking other code w ith the library. W e call this license the LesserG eneral Public License because it does Less to protect the users freedom than the ordinary G eneral Public License. It also provides other free softw are developers Less of an advantage over com peting non-free program s. These disadvantages are the reason w e use the ordinary G eneral Public License for m any libraries. H ow ever, the Lesser license provides advantages in certain special circum stances. For exam ple, on rare occasions, there m ay be a special need to encourage the w idest possible use of a certain library, so that it becom es a de-facto standard. To achieve this, non-free program s m ust be allow ed to use the library. A m ore frequent case is that a free library does the sam e job as w idely used non-free libraries. In this case, there is little to gain by lim iting the free library to free softw are only, so w e use the Lesser G eneral Public License. In other cases, perm ission to use a particular library in non-free program s enables a greater num ber of people to use a large body of free softw are. For exam ple, perm ission to use the G N U C Library in non-free program s enables m any m ore people to use the w hole G N U operating system , as w ell as its variant, the G N U /Linux operating system . A lthough the Lesser G eneral Public License is Less protective of the usersfreedom , it does ensure that the user of a program that is linked w ith the Library has the freedom and the w herew ithal to run that program using a m odified version of the Library. The precise term s and conditions for copying, distribution and m odification follow . Pay close attention to the difference betw een a w ork based on the libraryand a w ork that uses the library.The form er contains code derived from the library, w hereas the latter m ust be com bined w ith the library in order to run. A ppendix C Open Source Software Copyright Information 82 C opyright 2011, H arris C orporation GNU Lesser General Public License Terms and Conditions for Copying, Distribution and Modification 0. This License A greem ent applies to any softw are library or other program w hich contains a notice placed by the copyright holder or other authorized party saying it m ay be distributed under the term s of this Lesser G eneral Public License (also called this License). Each licensee is addressed as you. A librarym eans a collection of softw are functions and/or data prepared so as to be conveniently linked w ith application program s (w hich use som e of those functions and data) to form executables. The Library,below , refers to any such softw are library or w ork w hich has been distributed under these term s. A w ork based on the Librarym eans either the Library or any derivative w ork under copyright law : that is to say, a w ork containing the Library or a portion of it, either verbatim or w ith m odifications and/or translated straightforw ardly into another language. (H ereinafter, translation is included w ithout lim itation in the term m odification.) Source codefor a w ork m eans the preferred form of the w ork for m aking m odifications to it. For a library, com plete source code m eans all the source code for all m odules it contains, plus any associated interface definition files, plus the scripts used to control com pilation and installation of the library. A ctivities other than copying, distribution and m odification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a w ork based on the Library (independent of the use of the Library in a tool for w riting it). W hether that is true depends on w hat the Library does and w hat the program that uses the Library does. 1. You m ay copy and distribute verbatim copies of the Librarys com plete source code as you receive it, in any m edium , provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaim er of w arranty; keep intact all the notices that refer to this License and to the absence of any w arranty; and distribute a copy of this License along w ith the Library. You m ay charge a fee for the physical act of transferring a copy, and you m ay at your option offer w arranty protection in exchange for a fee. 2. You m ay m odify your copy or copies of the Library or any portion of it, thus form ing a w ork based on the Library, and copy and distribute such m odifications or w ork under the term s of Section 1 above, provided that you also m eet all of these conditions: a) The m odified w ork m ust itself be a softw are library. b) You m ust cause the files m odified to carry prom inent notices stating that you changed the files and the date of any change. c) You m ust cause the w hole of the w ork to be licensed at no charge to all third parties under the term s of this License. VSG -401 Installation and Operation Manual 83 C opyright 2011, H arris C orporation d) If a facility in the m odified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argum ent passed w hen the facility is invoked, then you m ust m ake a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and perform s w hatever part of its purpose rem ains m eaningful. (For exam ple, a function in a library to com pute square roots has a purpose that is entirely w ell-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function m ust be optional: if the application does not supply it, the square root function m ust still com pute square roots.) These requirem ents apply to the m odified w ork as a w hole. If identifiable sections of that w ork are not derived from the Library, and can be reasonably considered independent and separate w orks in them selves, then this License, and its term s, do not apply to those sections w hen you distribute them as separate w orks. But w hen you distribute the sam e sections as part of a w hole w hich is a w ork based on the Library, the distribution of the w hole m ust be on the term s of this License, w hose perm issions for other licensees extend to the entire w hole, and thus to each and every part regardless of w ho w rote it. Thus, it is not the intent of this section to claim rights or contest your rights to w ork w ritten entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective w orks based on the Library. In addition, m ere aggregation of another w ork not based on the Library w ith the Library (or w ith a w ork based on the Library) on a volum e of a storage or distribution m edium does not bring the other w ork under the scope of this License. 3. You m ay opt to apply the term s of the ordinary G N U G eneral Public License instead of this License to a given copy of the Library. To do this, you m ust alter all the notices that refer to this License, so that they refer to the ordinary G N U G eneral Public License, version 2, instead of to this License. (If a new er version than version 2 of the ordinary G N U G eneral Public License has appeared, then you can specify that version instead if you w ish.) D o not m ake any other change in these notices. O nce this change is m ade in a given copy, it is irreversible for that copy, so the ordinary G N U G eneral Public License applies to all subsequent copies and derivative w orks m ade from that copy. This option is useful w hen you w ish to copy part of the code of the Library into a program that is not a library. 4. You m ay copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the term s of Sections 1 and 2 above provided that you accom pany it w ith the com plete corresponding m achine-readable source code, w hich m ust be distributed under the term s of Sections 1 and 2 above on a m edium custom arily used for softw are interchange. If distribution of object code is m ade by offering access to copy from a designated place, then offering equivalent access to copy the source code from the sam e place satisfies the requirem ent to distribute the source code, even though third parties are not com pelled to copy the source along w ith the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to w ork w ith the Library by being com piled or linked w ith it, is called a w ork that uses the Library.Such a w ork, in isolation, is not a derivative w ork of the Library, and therefore falls outside the scope of this License. A ppendix C Open Source Software Copyright Information 84 C opyright 2011, H arris C orporation H ow ever, linking a w ork that uses the Libraryw ith the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a w ork that uses the library.The executable is therefore covered by this License. Section 6 states term s for distribution of such executables. W hen a w ork that uses the Libraryuses m aterial from a header file that is part of the Library, the object code for the w ork m ay be a derivative w ork of the Library even though the source code is not. W hether this is true is especially significant if the w ork can be linked w ithout the Library, or if the w ork is itself a library. The threshold for this to be true is not precisely defined by law . If such an object file uses only num erical param eters, data structure layouts and accessors, and sm all m acros and sm all inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of w hether it is legally a derivative w ork. (Executables containing this object code plus portions of the Library w ill still fall under Section 6.) O therw ise, if the w ork is a derivative of the Library, you m ay distribute the object code for the w ork under the term s of Section 6. A ny executables containing that w ork also fall under Section 6, w hether or not they are linked directly w ith the Library itself. 6. A s an exception to the Sections above, you m ay also com bine or link a w ork that uses the Libraryw ith the Library to produce a w ork containing portions of the Library, and distribute that w ork under term s of your choice, provided that the term s perm it m odification of the w ork for the custom ers ow n use and reverse engineering for debugging such m odifications. You m ust give prom inent notice w ith each copy of the w ork that the Library is used in it and that the Library and its use are covered by this License. You m ust supply a copy of this License. If the w ork during execution displays copyright notices, you m ust include the copyright notice for the Library am ong them , as w ell as a reference directing the user to the copy of this License. A lso, you m ust do one of these things: a) A ccom pany the w ork w ith the com plete corresponding m achine-readable source code for the Library including w hatever changes w ere used in the w ork (w hich m ust be distributed under Sections 1 and 2 above); and, if the w ork is an executable linked w ith the Library, w ith the com plete m achine-readable w ork that uses the Library,as object code and/or source code, so that the user can m odify the Library and then relink to produce a m odified executable containing the m odified Library. (It is understood that the user w ho changes the contents of definitions files in the Library w ill not necessarily be able to recom pile the application to use the m odified definitions.) b) U se a suitable shared library m echanism for linking w ith the Library. A suitable m echanism is one that (1) uses at run tim e a copy of the library already present on the users com puter system , rather than copying library functions into the executable, and (2) w ill operate properly w ith a m odified version of the library, if the user installs one, as long as the m odified version is interface-com patible w ith the version that the w ork w as m ade w ith. c) A ccom pany the w ork w ith a w ritten offer, valid for at least three years, to give the sam e user the m aterials specified in Subsection 6a, above, for a charge no m ore than the cost of perform ing this distribution. d) If distribution of the w ork is m ade by offering access to copy from a designated place, offer equivalent access to copy the above specified m aterials from the sam e place. e) Verify that the user has already received a copy of these m aterials or that you have already sent this user a copy. VSG -401 Installation and Operation Manual 85 C opyright 2011, H arris C orporation For an executable, the required form of the w ork that uses the Librarym ust include any data and utility program s needed for reproducing the executable from it. H ow ever, as a special exception, the m aterials to be distributed need not include anything that is norm ally distributed (in either source or binary form ) w ith the m ajor com ponents (com piler, kernel, and so on) of the operating system on w hich the executable runs, unless that com ponent itself accom panies the executable. It m ay happen that this requirem ent contradicts the license restrictions of other proprietary libraries that do not norm ally accom pany the operating system . Such a contradiction m eans you cannot use both them and the Library together in an executable that you distribute. 7. You m ay place library facilities that are a w ork based on the Library side-by-side in a single library together w ith other library facilities not covered by this License, and distribute such a com bined library, provided that the separate distribution of the w ork based on the Library and of the other library facilities is otherw ise perm itted, and provided that you do these tw o things: a) A ccom pany the com bined library w ith a copy of the sam e w ork based on the Library, uncom bined w ith any other library facilities. This m ust be distributed under the term s of the Sections above. b) G ive prom inent notice w ith the com bined library of the fact that part of it is a w ork based on the Library, and explaining w here to find the accom panying uncom bined form of the sam e w ork. 8. You m ay not copy, m odify, sublicense, link w ith, or distribute the Library except as expressly provided under this License. A ny attem pt otherw ise to copy, m odify, sublicense, link w ith, or distribute the Library is void, and w ill autom atically term inate your rights under this License. H ow ever, parties w ho have received copies, or rights, from you under this License w ill not have their licenses term inated so long as such parties rem ain in full com pliance. 9. You are not required to accept this License, since you have not signed it. H ow ever, nothing else grants you perm ission to m odify or distribute the Library or its derivative w orks. These actions are prohibited by law if you do not accept this License. Therefore, by m odifying or distributing the Library (or any w ork based on the Library), you indicate your acceptance of this License to do so, and all its term s and conditions for copying, distributing or m odifying the Library or w orks based on it. 10. Each tim e you redistribute the Library (or any w ork based on the Library), the recipient autom atically receives a license from the original licensor to copy, distribute, link w ith or m odify the Library subject to these term s and conditions. You m ay not im pose any further restrictions on the recipientsexercise of the rights granted herein. You are not responsible for enforcing com pliance by third parties w ith this License. 11. If, as a consequence of a court judgm ent or allegation of patent infringem ent or for any other reason (not lim ited to patent issues), conditions are im posed on you (w hether by court order, agreem ent or otherw ise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy sim ultaneously your obligations under this License and any other pertinent obligations, then as a consequence you m ay not distribute the Library at all. For exam ple, if a patent license w ould not perm it royalty-free redistribution of the Library by all those w ho receive copies directly or indirectly through you, then the only w ay you could satisfy both it and this License w ould be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circum stance, the balance of the section is intended to apply, and the section as a w hole is intended to apply in other circum stances. A ppendix C Open Source Software Copyright Information 86 C opyright 2011, H arris C orporation It is not the purpose of this section to induce you to infringe any patents or other property right claim s or to contest validity of any such claim s; this section has the sole purpose of protecting the integrity of the free softw are distribution system w hich is im plem ented by public license practices. M any people have m ade generous contributions to the w ide range of softw are distributed through that system in reliance on consistent application of that system ; it is up to the author/donor to decide if he or she is w illing to distribute softw are through any other system and a licensee cannot im pose that choice. This section is intended to m ake thoroughly clear w hat is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder w ho places the Library under this License m ay add an explicit geographical distribution lim itation excluding those countries, so that distribution is perm itted only in or am ong countries not thus excluded. In such case, this License incorporates the lim itation as if w ritten in the body of this License. 13. The Free Softw are Foundation m ay publish revised and/or new versions of the Lesser G eneral Public License from tim e to tim e. Such new versions w ill be sim ilar in spirit to the present version, but m ay differ in detail to address new problem s or concerns. Each version is given a distinguishing version num ber. If the Library specifies a version num ber of this License w hich applies to it and any later version,you have the option of follow ing the term s and conditions either of that version or of any later version published by the Free Softw are Foundation. If the Library does not specify a license version num ber, you m ay choose any version ever published by the Free Softw are Foundation. 14. If you w ish to incorporate parts of the Library into other free program s w hose distribution conditions are incom patible w ith these, w rite to the author to ask for perm ission. For softw are w hich is copyrighted by the Free Softw are Foundation, w rite to the Free Softw are Foundation; w e som etim es m ake exceptions for this. O ur decision w ill be guided by the tw o goals of preserving the free status of all derivatives of our free softw are and of prom oting the sharing and reuse of softw are generally. No Warranty 15. BEC A U SE TH E LIBRA RY IS LIC EN SED FREE O F C H A RG E, TH ERE IS N O W A RRA N TY FO R TH E LIBRA RY, TO TH E EXTEN T PERM ITTED BY A PPLIC A BLE LAW . EXC EPT W H EN O TH ERW ISE STATED IN W RITIN G TH E C O PYRIG H T H O LD ERS A N D /O R O TH ER PA RTIES PRO VID E TH E LIBRA RY A S ISW ITH O U T W A RRA N TY O F A N Y KIN D , EITH ER EXPRESSED O R IM PLIED , IN C LU D IN G , BU T N O T LIM ITED TO , TH E IM PLIED W A RRA N TIES O F M ERC H A N TA BILITY A N D FITN ESS FO R A PA RTIC U LA R PU RPO SE. TH E EN TIRE RISK A S TO TH E Q U A LITY A N D PERFO RM A N C E O F TH E LIBRA RY IS W ITH YO U . SH O U LD TH E LIBRA RY PRO VE D EFEC TIVE, YO U A SSU M E TH E C O ST O F A LL N EC ESSA RY SERVIC IN G , REPA IR O R C O RREC TIO N . 16. IN N O EVEN T U N LESS REQ U IRED BY A PPLIC A BLE LAW O R A G REED TO IN W RITIN G W ILL A N Y C O PYRIG H T H O LD ER, O R A N Y O TH ER PA RTY W H O M AY M O D IFY A N D /O R RED ISTRIBU TE TH E LIBRA RY A S PERM ITTED A BO VE, BE LIA BLE TO YO U FO R D A M A G ES, IN C LU D IN G A N Y G EN ERA L, SPEC IA L, IN C ID EN TA L O R C O N SEQ U EN TIA L D A M A G ES A RISIN G O U T O F TH E U SE O R IN A BILITY TO U SE TH E LIBRA RY (IN C LU D IN G BU T N O T LIM ITED TO LO SS O F D ATA O R D ATA BEIN G REN D ERED IN A C C U RATE O R LO SSES SU STA IN ED BY YO U O R TH IRD PA RTIES O R A FA ILU RE O F TH E LIBRA RY TO O PERATE W ITH A N Y O TH ER SO FTW A RE), EVEN IF SU C H H O LD ER O R O TH ER PA RTY H A S BEEN A D VISED O F TH E PO SSIBILITY O F SU C H D A M A G ES. 87 C opyright 2010, H arris C orporation Index A A bout m enu 4041 A ccessing setup m enus 26 A ccessories optional 10, 56 standard 55 A dding user accounts 45 A udience 1 A udio out setup m enu 35 B Back panel 11, 16 BLK-4 10, 56 Brow ser interface 43 C C onnections 16 C ontrol panels front panel 1921 w eb-based 44 C opyrights 7186 C am bridge Broadband Ltd. 72 C isco/BU PTN IC 74 C M U /U C D 71 Fabasoft R& D Softw are G m bH & C o. KG 75 N etw orks A ssociates Technology 72 Sparta, Inc. 74 Sun M icrosystem s, Inc. 73 C ustom er Service 12 D D efault passw ord 43 D efault user ID 43 D eleting user accounts 46 D irectives RoH S 6 W EEE 6 D isplays specifications 54 D RT-4 10, 1415, 56 D uration 61 See also A larm s E Editing user accounts 46 Ethernet connector pinouts (RJ45) 58 setup 1718 specifications 54 External control 43 F Features 9 Finding inform ation 1 Front panel 11, 1921 Functions, selecting 22 G G lossary 5969 I-J-K Initial checks 49 Inspecting shipm ent 13 Installation checking contents 13 connections 16 Ethernet setup 1718 rack m ounting 1415 Index 88 C opyright 2010, H arris C orporation L Licenses FreeType 71 G N U lesser public 8086 G N U v2 7580 LibJPEG 71 LTC /G PI D -Sub connector pinouts 57 M M ain features 9 M anaging user accounts 45 M echanical specifications 55 N N avigating setup m enus 26, 31 O O pen source softw are 7186 C am bridge Broadband Ltd. 72 C isco/BU PTN IC 74 C M U /U C D copyright notice 71 Fabasoft R& D Softw are G m bH & C o. KG 75 FreeType license 71 G N U lesser public license 8086 G N U v2 license 7580 LibJPEG license 71 N etw orks A ssociates Technology 72 Sparta, Inc. 74 Sun M icrosystem s, Inc. 73 O ptional accessories 10, 56 O ptions 10 P Panels front panel controls 11, 1921 Passw ord, default 43 Pinouts Ethernet (RJ45) connector 58 LTC /G PI D -Sub connector 57 pow er connector 58 Pow er connector pinouts 58 Pow er requirem ents 54 Product service 3 PTC -4 10, 56 Q Q uick controls 19 R RA . See Return authorization Rack m ounting C M N -41 1415 Restarting 49 Restriction on H azardous Substances (RoH S) directive 6 Return authorization 12 Returning products 3 RJ45 connector pinouts 58 S Safety com pliances 4 directives 67 inform ation 11 standards 4 sym bols 5 SD I out setup m enu 32 Selecting functions 22 Service 3, 12 Setup m enus accessing 26 navigating 26, 31 unit configuration 3940 Shipping inform ation 3 Specifications accessories 55 display 54 Ethernet 54 m echanical 55 pow er requirem ents 54 Standard accessories 55 Sync output video form at 36 T TC insertion m enu 38 Term s 5969 Tim ing offset setup 37 Troubleshooting 4950 TVM -W RTY2 10, 56 U U C D copyright notice 71 U nit configuration setup m enu 3940 U npacking m odules 3 VSG -401 Installation and Operation Manual 89 C opyright 2010, H arris C orporation U ser accounts adding 45 deleting 46 editing 46 m anaging 45 U ser ID , default 43 W-X-Y W aste from Electrical and Electronic Equipm ent (W EEE) directive 6 W eb rem ote display 43 W eb-based control panel 44 Index 90 C opyright 2010, H arris C orporation